- 11 Mar, 2021 40 commits
-
-
Laurent Pinchart authored
capture_validate_fmt() delegates the media bus format to pixel format conversion to __capture_legacy_try_fmt(). It turns out that this can be simplified quite a lot: - The format lookup from media bus code can be performed by the recently added capture_find_format() function instead of receiving the information from a side effect of __capture_legacy_try_fmt(). - The validation of the pixel format size isn't needed, as they duplicate the validation of the compose rectangle. The pixel format size is directly derived from the size of the incoming stream, which is stored in the compose rectangle. If the compose rectangle is valid, the pixel format size will be valid too. By removing the validation of the pixel format size and using capture_find_format() to lookup the format, we can stop using __capture_legacy_try_fmt() and simplify capture_validate_fmt(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Laurent Pinchart authored
Extract the format lookup code from __capture_legacy_try_fmt() to a separate function, it will be reused when validating the video node format at stream start time. Signed-off-by:
-
Laurent Pinchart authored
The correct return code to report an invalid pipeline configuration is -EPIPE. Return it instead of -EINVAL from __capture_legacy_try_fmt() when the capture format doesn't match the media bus format of the connected subdev. Signed-off-by:
-
Laurent Pinchart authored
The __capture_legacy_try_fmt() function only needs the v4l2_pix_format embedded in the v4l2_format argument it receives. Pass it the v4l2_pix_format directly, allowing on caller to allocate a smaller structure on the stack. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The __capture_legacy_try_fmt() function doesn't need two imx_media_pixfmt pointer variables. Remove one of them. Signed-off-by:
-
Laurent Pinchart authored
Add a parameter to the imx_media_capture_device_init() function to select between the legacy and MC-centric API. When selecting the MC-centric API, the video node doesn't inherit controls from subdevs anymore. All callers are updated to use the legacy API for now, preserving the existing behaviour. Signed-off-by:
-
Laurent Pinchart authored
The i.MX media drivers implement a legacy video node API, where the format of the video node is influenced by the active format of the connected subdev (both for enumeration and for the get, set and try format ioctls), and where controls exposed by the subdevs in the pipeline are inherited by the video node. At the same time, the drivers implement the media controller API and expose subdev video nodes to userspace. Those two modes of operation are incompatible and should not be exposed together. Furthermore, the legacy API gets in the way of proper enumeration of pixel formats on the video node, as it prevents compliance with the V4L2 specification. As a first step towards fixing this, rename all V4L2 video node ioctl handlers with a legacy prefix. This will allow implementing a new set of ioctls in parallel and gradually switching drivers. Add a task to the TODO file for the removal of the legacy API. Signed-off-by:
-
Laurent Pinchart authored
For consistency with all the other ioctl handlers, rename vidioc_querycap() to capture_querycap(). Signed-off-by:
-
Laurent Pinchart authored
To prepare for more complex default format initialization and keep imx_media_capture_device_register() simple, extract the format initialization code to a separate function. Signed-off-by:
-
Laurent Pinchart authored
The imx_media_video_dev structure stores the active format on the video node in an instance of v4l2_format. This wastes memory when all we need is the information contained in the smaller v4l2_pix_format sub-structure. Replace v4l2_format by v4l2_pix_format to save memory. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Laurent Pinchart authored
When the video device is registered, it can get used by userspace immediately. Its initialization must thus be fully complete. Ensure this by registering the video device after all initialization steps. Signed-off-by:
-
Laurent Pinchart authored
Overwriting the whole video_device isn't future-proof as it would overwrite any field initialized by video_device_alloc(). Furthermore, the current implementation modifies the global template video_device as if it were a per-instance structure, which is bad practice. To fix all this, initialize the video device programmatically in imx_media_capture_device_init(). Signed-off-by:
-
Laurent Pinchart authored
Move the initialization of the vb2 queue and the control handler to the imx_media_capture_device_init() function. There's no need to delay them until the registration time. Signed-off-by:
-
Laurent Pinchart authored
The stop field in the capture_priv structure is only set, never read. Drop it. Signed-off-by:
-
Laurent Pinchart authored
Document all the fields of the capture_priv structure and group them by purpose. Signed-off-by:
-
Laurent Pinchart authored
If the call to v4l2_fh_open() fails, return the error code instead of proceeding normally as if nothing happened. Signed-off-by:
-
Laurent Pinchart authored
The forward declaration of capture_qops isn't needed, remove it. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_capability bus_info field is meant to locate the device in the system. Using a subdev name isn't a good fit, the device name is a much better option. Use it. Signed-off-by:
-
Laurent Pinchart authored
The imx-media-capture helpers operate a video device node, but abuse the v4l2_* subdev print functions to log messages. We have a struct device pointer available, use it instead with the dev_* functions. This reduces dependencies from imx-media-capture to the connected subdev. Signed-off-by:
-
Laurent Pinchart authored
Add a media bus code argument to the imx_media_enum_pixel_formats(). If set to a non-zero value, the function will only consider pixel formats that match the given media bus code. Signed-off-by:
-
Laurent Pinchart authored
All drivers use 640x480 as the default size, but they all hardcode those values. Create two global macros named IMX_MEDIA_DEF_PIX_WIDTH and IMX_MEDIA_DEF_PIX_HEIGHT to store the default size, and use them through the code. Signed-off-by:
-
Laurent Pinchart authored
imx6-media-objs contains a set of objects that are specific to the i.MX6 IPU-based media subsystem. They're not needed for the i.MX7 CSI. Only compile them if CONFIG_VIDEO_IMX_CSI is selected. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Laurent Pinchart authored
The VIDEO_IMX_CSI and VIDEO_IMX7_CSI symbols are defined in a section guarded by VIDEO_IMX_MEDIA. There's no need to duplicate that with a "depends on" statement. Drop it. Signed-off-by:
-
Laurent Pinchart authored
All the i.MX staging media drivers depend on VIDEO_DEV. Move the dependency to the common VIDEO_IMX_MEDIA symbol to avoid repeating it. While at it, sort the dependencies and selections alphabetically. Signed-off-by:
-
Laurent Pinchart authored
The i.MX staging media drivers don't depend on I2C. Drop the dependency from Kconfig. Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because in all cases, it is called from a probe function and no lock is taken in the between. The call chain is: ngene_probe (probe function, used in ngene-cards.c) --> ngene_get_buffers --> AllocCommonBuffers (call dma_alloc_coherent) --> create_ring_buffer (call dma_alloc_coherent) --> AllocateRingBuffers (call dma_alloc_coherent) @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Colin Ian King authored
The variable image_to_select is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Wolfram Sang authored
The open coded version differs from the one in the core in one way: the buffer will be always copied back, even when the transfer failed. Be more robust: use the block read from the I2C core and propagate a potential errno further to the sanity checks. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Brad Love authored
Reports indicated S-Video capture did not work on HVR1265_K4, so all devices on hand were audited and corrected to become fully functional. ImpactVCB-e - Remove extraneous composite inputs - Fix S-Video inputs HVR5525 - Add routing and config for composite capture - Add routing and config for S-Video capture - Add routing for audio on both composite/S-Video HVR1265_K4 - Remove non-existent composite capture - Add routing and config for S-Video capture Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Brad Love authored
The folowing AMD IOMMU are affected by the RiSC engine stall, requiring a reset to maintain continual operation. After being added to the broken_dev_id list the systems are functional long term. 0x1481 is the PCI ID for the IOMMU found on Starship/Matisse 0x1419 is the PCI ID for the IOMMU found on 15h (Models 10h-1fh) family 0x5a23 is the PCI ID for the IOMMU found on RD890S/RD990 Signed-off-by:
-
Jonathan Neuschäfer authored
The syntax without dots is available since commit 43756e34 ("scripts/kernel-doc: Add support for named variable macro arguments"). The same HTML output is produced with and without this patch. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
-
Jae Hyun Yoo authored
Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting. Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Signed-off-by:
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Eddie James <eajames@linux.ibm.com> Fixes: d3d04f6c ("clk: Add support for AST2600 SoC") Reviewed-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Dafna Hirschfeld authored
When setting the source media bus code in the resizer, we first check that the current media bus code in the source is yuv encoded format. This is done by retrieving the data from the formats list of the isp entity. This cause a crash when the media bus code on the source is YUYV8_1_5X8 which is not supported by the isp entity. Instead we should test the sink format of the resizer which is guaranteed to be supported by the isp entity. Fixes: 251b6eeb ("media: staging: rkisp1: rsz: Add support to more YUV encoded mbus codes on src pad") Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Tested-by:
Sebastian Fricke <sebastian.fricke.linux@gmail.com> Signed-off-by:
-
Tom Rix authored
The macro use will already have a semicolon. Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
Yang Yingliang authored
If omap4iss_get() failed, it need return error code in iss_probe(). Fixes: 59f0ad80 ("[media] v4l: omap4iss: Add support for OMAP4...") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Davidlohr Bueso authored
Use the mutex api instead of renaming the calls for this driver. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Qinglang Miao authored
Simplify the return expression. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
Liu Shixin authored
Simplify the return expression. Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Signed-off-by:
-
Tasos Sahanidis authored
The new AMD IOMMU DMA implementation concatenates sglist entries under certain conditions, and because saa7146 accessed the length member directly, it did not support this scenario. This fixes IO_PAGE_FAULTs by using the sg_dma_len macro. Fixes: be62dbf5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Signed-off-by:
Tasos Sahanidis <tasos@tasossah.com> Signed-off-by:
-
Tasos Sahanidis authored
The new AMD IOMMU DMA implementation concatenates sglist entries under certain conditions, and because saa7134 accessed the length member directly, it did not support this scenario. This fixes IO_PAGE_FAULTs and choppy DMA audio by using the sg_dma_len macro. Fixes: be62dbf5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Signed-off-by:
-
