In case of a missing (optional) gpio don't fall through up to
"ti,active-discharge-time-us" due to
devm_fwnode_get_index_gpiod_from_child() returning NULL (since
gpiod_get_from_of_node() returned NULL) but rather indicate success as
intended.

This makes the driver probe correctly when e.g. only the enable gpio is
given.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://lore.kernel.org/r/363bd50cc7c60daa57d614a341d1fd649f05194c.1567625660.git.agx@sigxcpu.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The kernel has no way of knowing when we have finished instantiating
drivers, between deferred probe and systems that build key drivers as
modules we might be doing this long after userspace has booted. This has
always been a bit of an issue with regulator_init_complete since it can
power off hardware that's not had it's driver loaded which can result in
user visible effects, the main case is powering off displays. Practically
speaking it's not been an issue in real systems since most systems that
use the regulator API are embedded and build in key drivers anyway but
with Arm laptops coming on the market it's becoming more of an issue so
let's do something about it.

In the absence of any better idea just defer the powering off for 30s
after late_initcall(), this is obviously a hack but it should mask the
issue for now and it's no more arbitrary than late_initcall() itself.
Ideally we'd have some heuristics to detect if we're on an affected
system and tune or skip the delay appropriately, and there may be some
need for a command line option to be added.

Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Cc: stable@vger.kernel.org

The build fails when CONFIG_REGULATOR is not selected because the stub
for regulator_bulk_set_supply_names() is missing the 'static inline'
attribute.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190902151332.28058-1-brgl@bgdev.plSigned-off-by: Mark Brown <broonie@kernel.org>

There are many regulator consumers who - before using the regulator
bulk functions - set the supply names in regulator_bulk_data using
a for loop.

Let's provide a simple helper in the consumer API that allows users
to do the same with a single function call.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190830071740.4267-2-brgl@bgdev.plSigned-off-by: Mark Brown <broonie@kernel.org>

In an effort to try to contain abuses of regulator_get_optional() add a
keyword entry to the MAINTAINERS stanza for the regulator API so that the
regulator maintainers get CCed on new usages.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20190829125435.48770-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add prefixes to BUCK_EN and MODE macros to namespace them.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190829143927.395d0385@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

Update the entire comment block to be C++ style so it looks consistent.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190829143749.4b42bc65@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

The mt6358 driver was merged in error, it depends on an existing MFD
rather than a newly added one and needs updates to that driver.  Disable
the build until those are merged.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@kernel.org>

The MT6358 is a regulator found on boards based on MediaTek MT8183 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1566531931-9772-8-git-send-email-hsin-hsiung.wang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

add dt-binding document for MediaTek MT6358 PMIC
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1566531931-9772-6-git-send-email-hsin-hsiung.wang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The differences between SY8824C and SY20278 are different regs
for mode/enable.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163830.2c94f29b@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

SY20276 is an I2C-controlled adjustable voltage regulator made by
Silergy Corp. The differences between SY8824C and SY20278 are
different regs for mode/enable.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163754.170cf130@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

The differences between SY8824C and SY20276 are different vsel_min,
vsel_step, vsel_count and regs for mode/enable.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163721.1947f7a0@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

SY20276 is an I2C-controlled adjustable voltage regulator made by
Silergy Corp. The differences between SY8824C and SY20276 are
different vsel_min, vsel_step, vsel_count and regs for mode/enable.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163650.47ed1213@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

The only difference between SY8824E and SY8824C/D is the vsel_min.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163537.52023c4e@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

SY8824E is an I2C-controlled adjustable voltage regulator made by
Silergy Corp. The only difference between SY8824C and SY8824E is the
vsel_min.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163505.361890af@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

SY8824C is an I2C attached single output regulator made by Silergy Corp,
which is used on several Synaptics berlin platforms to control the
power supply of the ARM cores.

Add a driver for it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163418.1a32fc48@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

SY8824C is an I2C-controlled adjustable voltage regulator made by
Silergy Corp.

Add its device tree binding.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163341.61df63a7@xhacker.debianSigned-off-by: Mark Brown <broonie@kernel.org>

Implement ->set_mode(), ->get_mode() and ->set_suspend_xx() hooks
for act8865 with unlocked expert registers.

Based on work done by Borris Brezillon on [1].
[1] https://www.spinics.net/lists/kernel/msg2942960.htmlSigned-off-by: Raag Jadav <raagjadav@gmail.com>
Link: https://lore.kernel.org/r/1565721176-8955-2-git-send-email-raagjadav@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In function of_get_child_regulator(), the loop for_each_child_of_node()
contains two mid-loop return statements, each preceded by a statement
putting child. In order to reduce this repetition, create a new label,
err_node_put, that puts child and then returns the required value;
edit the mid-loop return blocks to instead go to this new label.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190815053704.32156-1-nishkadg.linux@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add documentation for act8865 regulator modes and suspend states.
Add active-semi,8865-regulator.h file for device tree binding constants
for act8865 regulators.
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Link: https://lore.kernel.org/r/1565721176-8955-3-git-send-email-raagjadav@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Variable ret is initialized to a value that is never read before
a return statement and hence can be removed. Remove it.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190813133114.14931-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas the SD
specification expect 1ms.

The WR_S bit allows the TWL6030 to no reset at all the VMMC during warm
reset and keep the current voltage. Thanks to this workaround the SD
card doesn't reach a undefined reset stage.

Actually this behavior is available for all the LDO regulator, so the
driver will also allow to use it with any of these regulator.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190725094542.16547-4-gregory.clement@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Instead of refering the full pdev->dev.of_node use a local variable.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190725094542.16547-3-gregory.clement@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas the SD
specification expect 1ms.

For this 2 reasons being able to no reset at all the VMMC during warm
reset and keep the current voltage is a good workaround. The TWL6030
allows this but needs to be aware of it and this configuration should
also be shared with the bootloader.

This is the purpose of this new property: ti,retain-on-reset
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190725094542.16547-2-gregory.clement@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the PMIC5 modes and use them pmic5 ldo and smps
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190809073616.1235-4-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

pmic5_bob voltages count is 136 [0,135] so update it
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190809073616.1235-3-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

It helps to keep sorted order for compatibles, so sort them
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190809073616.1235-2-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

It helps to keep sorted order for compatibles and nodes, so sort them
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190809073616.1235-1-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Building without CONFIG_POWER_SUPPLY will fail:

drivers/regulator/act8865-regulator.o: In function `act8865_pmic_probe':
act8865-regulator.c:(.text+0x357): undefined reference to `devm_power_supply_register'
drivers/regulator/act8865-regulator.o: In function `act8600_charger_get_property':
act8865-regulator.c:(.text+0x3f1): undefined reference to `power_supply_get_drvdata'

Add POWER_SUPPLY dependency to Kconfig.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2d09a79b ("regulator: act8865: Add support for act8600 charger")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190807133822.67124-1-yuehaibing@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support from RPMH regulators found in SM8150 platform
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190808093343.5600-2-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add PM8150, PM8150L and PM8009 compatibles for these PMICs found
in some Qualcomm platforms.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190808093343.5600-1-vkoul@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return in
two places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190804162023.5673-1-nishkadg.linux@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-38-swboyd@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/regulator/act8865-regulator.c:447:8-14: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 2d09a79b ("regulator: act8865: Add support for act8600 charger")
CC: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190724092236.witxtfmubun25l2t@1905cc33b6ddSigned-off-by: Mark Brown <broonie@kernel.org>

AC8865 has internal 1.5k pull-down resistor that can be enabled when LDO
is shut down.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/d7338f0dfcac63eb958a6b5e42e2d540b3d3f54a.1563898936.git.mirq-linux@rere.qmqm.plSigned-off-by: Mark Brown <broonie@kernel.org>

Rename act8865_ldo_ops to act8865_fixed_ldo_ops to make room for
variable-output LDO ops change.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/12b1fe419e93dfe663990009bf1b2fbf630e9934.1563898936.git.mirq-linux@rere.qmqm.plSigned-off-by: Mark Brown <broonie@kernel.org>

Setting .n_voltages = 1 and .fixed_uV is enough for fixed regulator,
remove the redundant .min_uV and .list_voltage settings.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/20190723014102.25103-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>

This provides a way to monitor battery charge status via the power
supply subsystem.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20190723011418.29143-1-paul@crapouillou.netSigned-off-by: Mark Brown <broonie@kernel.org>

-EINVAL is not a valid return value for .of_map_mode, return
REGULATOR_MODE_INVALID instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190711122138.5221-1-axel.lin@ingics.comSigned-off-by: Mark Brown <broonie@kernel.org>