- 07 Dec, 2009 40 commits
-
-
Joe Perches authored
There are currently 4 directories in drivers/s390 (block, char, cio, kvm) without maintainers. Add drivers/s390/ to the s390 kvm section. Add the rest to the default s390 section. Add a W: link for drivers/s390/crypto/ Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Christian Borntraeger authored
A compare shows that arch/s390/include/asm/sockios.h is the same as include/asm-generic/sockios.h. This patch lets arch/s390/include/asm/ termbits.h include the generic header. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
A compare shows that arch/s390/include/asm/termbits.h is the same as include/asm-generic.h. This patch lets arch/s390/include/asm/termbits.h include the generic header. Signed-off-by:
-
Heiko Carstens authored
Remove unused typedef, defines, update copyright, remove unneeded includes, remove unneeded ifdefs. Signed-off-by:
-
Martin Schwidefsky authored
The pages allocated by the cmm memory balloon should be freed before the hibernation image is created. Otherwise the memory reserved by the balloon gets written to the swap device but there is no content in these pages that need to be preserved. Signed-off-by: -
Martin Schwidefsky authored
Git commit ea435467 changed the definition of atomic_t and atomic64_t for s390 by adding the volatile modifier to the counter field. This has an unfortunate side effect with newer versions of the gcc. The typeof operator now picks up the volatile modifier from the expression. This causes the compiler to think that it has to store the two temporary variable old_val and new_val in the __CS_LOOP for the different atomic operations to the stack as the variables are now volatile. Both stores are superfluous. The hack to replace typeof(ptr->counter) with int in __CS_LOOP and and long long in __CSG_LOOP avoids the two stores. A better solution would be to drop the volatile from the counter field of the atomic_t and atomic64_t definition. But that is a touchy subject .. Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Martin Schwidefsky authored
Replace BLK with a per device mutex. Signed-off-by: -
Martin Schwidefsky authored
Rename tape_get_device to tape_find_device and tape_get_device_reference to tape_get_device. The old names didn't make too much sense. Follow the get_device()/put_device() semantic and convert tape_put_device to a void function. Signed-off-by: -
Martin Schwidefsky authored
Fix a bug introduced with git commit dff59b64: - if (cdev->dev.driver_data != NULL) { + if (!dev_get_drvdata(&cdev->dev)) { These two are not equivalent. Signed-off-by:
-
Martin Schwidefsky authored
The change to f_pos in the read / write method has no effect as the value is controlled by the VFS layer, e.g. for vfs_read: loff_t pos = file_pos_read(file); ret = vfs_read(file, buf, count, &pos); file_pos_write(file, pos); Signed-off-by: -
Felix Beck authored
Protect the hrtimer ap_poll_timer from being scheduled at the same time from several processes. Signed-off-by:
Felix Beck <felix.beck@de.ibm.com> Signed-off-by:
-
Felix Beck authored
Cex3 needs a lower speed rating. Otherwise cex2 adapters will be prefered. Signed-off-by:
-
Felix Beck authored
Cards with lower speed rating are prefered. Thus change adjust the speed rating of cex2c adapters to be prefered before pcixcc, although they should not appear in the same machine anyway. Signed-off-by:
-
Felix Beck authored
New definitions are added for CEX3 device types. They will be set in the according probe functions. CEX3 device types will be handled in the same modules as CEX2 device types. In the first step they are the same as CEX2 types, but they can be adjusted for further characteristics of CEX3 easily. Signed-off-by:
Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Signed-off-by:
-
Felix Beck authored
This patch renames the CEX2C2 and CEX2A2 types to CEX3 device types. Signed-off-by:
-
Felix Beck authored
Support for special command is implemented in the AP Bus in the NQAP function __ap_send. This is extended for a further parameter special. When set, the special bit, in GR0 will be set. Therefor the ap_message struct is extended for a further bit. Thus calling functions of __ap_send can use the special parameter in ap_message to give to __ap_send. Affected is in the first place ap_queue_message, which is called by the actual card driver. The second part of this support is that the card driver for the CEX3C needs to set this special bit, when an according CPRB is sent to the driver. Signed-off-by:
-
Felix Beck authored
AP messages need to be initialized, before they will be used. Values will be zeroized. This will be needed later when introducing support for the special commands. Signed-off-by:
-
Stefan Weinhuber authored
The first DASD that is set online for a specific logical control unit has to do certain setup steps on the storage server to make full use of it, for example it will enable PAV. The features and characteristics reported by the storage server will depend on this setup, so all other devices on the same LCU will need to wait for the setup to be finished. Signed-off-by:
Stefan Weinhuber <wein@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
Remove strings from s390 debugfeature entries that could lead to a crash when the data is read from dbf because the strings do not exist any more. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Stefan Weinhuber authored
Most of the error conditions reported by a FICON storage server indicate situations which can be recovered. Sometimes the host just needs to retry an I/O request, but sometimes the recovery is more complex and requires the device driver to wait, choose a different path, etc. The DASD device driver has a fully featured error recovery for normal block layer I/O, but not for internal I/O request which are for example used during the device bring up. This can lead to situations where the IPL of a system fails because DASD devices are not properly recognized. This patch will extend the internal I/O handling to use the existing error recovery procedures. Signed-off-by:
-
Stefan Weinhuber authored
The DASD device driver needs to explicitly enable the prefix command on the storage server, before it can be used. Originally we enabled this command along with others only if we wanted to support PAV. However, today we require this command for other features like High Performance FICON as well, so we need to always enable prefix. Signed-off-by:
-
Christian Borntraeger authored
the todclk.h header file is dead code. Remove it. Signed-off-by:
-
Stefan Weinhuber authored
When a DASD device is used with the DIAG discipline, the DIAG initialization will indicate success or error with a respective return code. So far we have interpreted a return code of 4 as error, but it actually means that the initialization was successful, but the device is read-only. To allow read-only devices to be used with DIAG we need to accept a return code of 4 as success. Re-initialization of the DIAG access is also part of the DIAG error recovery. If we find that the access mode of a device has been changed from writable to read-only while the device was in use, we print an error message. Signed-off-by:
-
Gerald Schaefer authored
The pagetable walk usercopy functions have used a modified copy of the do_exception() function for fault handling. This lead to inconsistencies with recent changes to do_exception(), e.g. performance counters. This patch changes the pagetable walk usercopy code to call do_exception() directly, eliminating the redundancy. A new parameter is added to do_exception() to specify the fault address. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Simplify the check of the vma->flags in do_exception for the different fault types. Signed-off-by: -
Martin Schwidefsky authored
Slim down the do_exception function to handle only the fast path of a fault and move the exceptional cases into a new function. That slightly increases the performance of the fault handling. Build fix for !CONFIG_COMPAT by Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: -
Martin Schwidefsky authored
notify_page_fault does a preempt_disable/preempt_enable for each fault generated by a kernel access to user space. If kprobes is not active that is unnecessary since the interrupts are not reenabled yet. To play safe repeat the kprobe_running check after preempt_disable(). Signed-off-by: -
Martin Schwidefsky authored
Introduce user_mode to replace the two variables switch_amode and s390_noexec. There are three valid combinations of the old values: 1) switch_amode == 0 && s390_noexec == 0 2) switch_amode == 1 && s390_noexec == 0 3) switch_amode == 1 && s390_noexec == 1 They get replaced by 1) user_mode == HOME_SPACE_MODE 2) user_mode == PRIMARY_SPACE_MODE 3) user_mode == SECONDARY_SPACE_MODE The new kernel parameter user_mode=[primary,secondary,home] lets you choose the address space mode the user space processes should use. In addition the CONFIG_S390_SWITCH_AMODE config option is removed. Signed-off-by: -
Martin Schwidefsky authored
A data access in access-register mode always is a user mode access, the code to inspect the access-registers can be removed. The second change is to use a different test to check for no-execute fault. The third change is to pass the translation exception identification as parameter, in theory the trans_exc_code in the lowcore could have been overwritten by the time the call to check_space from do_no_context is done. Signed-off-by: -
Sebastian Ott authored
If we detect a busy subchannel after the driver's set_offline callback returned in ccw_device_set_offline, the current behavior is to unregister the device, which may lead to undesired consequences. Change this to just quiesce the subchannel and go on with the offline processing. Note: This is no excuse for not fixing these drivers - after the set_offline callback they should have no running IO! Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Peter Oberparleiter authored
Improve error recovery for internal I/Os by repeating each I/O 256 times per path to cope with long-running non-permanent error conditions. Also retry each path twice to cope with link flapping, i.e. single paths becoming unavailable in the order in which they are tried. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Sebastian Ott authored
IO subchannels are always unregistered in process context, so use spin_lock_irq in the corresponding remove callback. Signed-off-by:
-
Sebastian Ott authored
Ensure that there will be no more interrupts for an unregistered device by using the same quiesce and disable loop as in io_subchannel_shutdown. Signed-off-by:
-
Sebastian Ott authored
Try to disable the old subchannel before we ask the driver core to move the attached device to a new parent. This way we can use the QUIESCE state during shutdown which prevents a possible use after free situation in some error cases. Signed-off-by:
-
Sebastian Ott authored
Handle a failing cio_disable_subchannel at the end of our device recognition as if the recognition itself failed. This way subsequent registration steps do not need to handle enabled subchannels. Signed-off-by:
-
Sebastian Ott authored
DEV_STATE_QUIESCE is used to stop all IO on a busy subchannel. This patch fixes the following problems related to the QUIESCE state: * Fix a potential race condition which could occur when the resulting state was DEV_STATE_OFFLINE. * Add missing locking around cio_disable_subchannel, ccw_device_cancel_halt_clear and the cdev's handler. * Loop until we know for sure that the subchannel is disabled. Signed-off-by:
-
Sebastian Ott authored
The function ccw_device_unregister has to ensure to remove all references obtained by device_add and device_initialize. Unfortunately it gets called for devices which are 1) uninitialized, 2) initialized but unregistered, and 3) registered devices. To distinguish 1) and 2) this patch introduces a new flag "initialized", which is 1 as long as we hold the initial device reference. Signed-off-by:
-
Sebastian Ott authored
We used to maintain a "registered" flag in our ccw_device_private structure. This patch removes the "registered" flag and converts all users of it to device_is_registered which has the exact same meaning. Note: The usage the atomic operation test_and_clear_bit is replaced by the non-atomic if (device_is_registered()) device_del(). This will not do harm, since we serialize calls to ccw_device_unregister with a single-threaded workqueue. Signed-off-by:
-
Peter Oberparleiter authored
An Unconditional Reserve + Release operation (steal lock) for a boxed device may fail when encountering special error cases (e.g. unit checks or path errors). Fix this by using the more robust ccw_request infrastructure for performing the steal lock CCW program. Signed-off-by:
-
Peter Oberparleiter authored
Set-pgid operations fail for some device types under z/VM for which the hypervisor has already set the pgid. Also reserved devices or changed pgids are not correctly recognized. Fix these problems by using a combination of sense-pgid and set-pgid and by also accepting pre-defined pgid settings. Signed-off-by:
-
