- 01 Nov, 2019 36 commits
-
-
Joel Stanley authored
This adds the description of the Power9 CPUs that are attached to the BMC. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The UART has an issue on A0 that can be worked around by using the Synopsis driver. Tested-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The UARTs on the AST2600 A0 have a known issue that can be worked around by using the Synopsys driver. Tested-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The AST2600 has five UARTs. Add UART 1 to 4. Tested-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The upstream clock for the I2C buses is APB2. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
We need to ungate RCLK on AST2500- and AST2600-based platforms for RMII to function. RMII interfaces are commonly used for NCSI. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
This contains the dt-bindings headers for the ethernet clocks. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
Tacoma has two SPI flash devices attached to the FMC, and one on the SPI controller. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Brad Bishop authored
Add fan controllers, regulators, temperature sensors, power supplies and regulators. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The ast2600 has two FSI masters on the APB. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Cédric Le Goater authored
Keep the FMC controller chips at a safe 50 MHz rate and use 100 MHz for the PNOR on the machines using a AST2500 SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
Use the SoC-specific compatible strings instead. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Alexander Filippov authored
Adds a new power_green led to show the host state. Signed-off-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Eddie James authored
Add gpio-keys for various signals on Tacoma. Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
All 2600-evb MACs use RGMII/MDIO. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
This way enabling the MDIO controllers automatically requests the right pinmux configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
The binding was updated to better reflect the intended use of the hardware and the existing function/groups for SD3 were dropped. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The AST2600 u-boot and kernel images have outgrown the OpenBMC layout. While BMC machines use 128MB SPI NOR chips, we only have 64MB on the EVB so use a layout that has a smaller region for the ro and rw filesystems. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Cédric Le Goater authored
Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
Tacoma has two SPI flash devices attached to the FMC, and one on the SPI controller. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Cédric Le Goater authored
Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Brad Bishop authored
Add fan controllers, regulators, temperature sensors, power supplies and regulators. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Brad Bishop authored
Rainier contains two NCSI network devices. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Brad Bishop authored
Rainier is a new IBM server with POWER host processors and an AST2600 BMC. Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Brad Bishop authored
This is an alternate layout used by OpenBMC systems that require more space on the BMC's flash. In addition to more space for the rootfs, it supports a larger u-boot and Linux kernel FIT image. The division of space is as follows: u-boot + env: 1MB kernel/FIT: 9MB rwfs: 86MB rofs: 32MB Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Chicago Duan authored
Change BMC init-ok from GPIO to LED, which needs to blink when BMC initialization is complete. Use TAB to align some lines. Signed-off-by: Chicago Duan <duanzhijia01@inspur.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Eddie James authored
Enable all the I2C busses on Tacoma and add the I2C slave devices that exist on the busses. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
This is an AST2600 based BMC card for a Power9 system. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Cédric Le Goater authored
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Brad Bishop authored
Everything is the same as G5, except the devices have their own interrupt now. Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The AST2600 has two VUART devices. Reviewed-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Joel Stanley authored
The AST2600 has 16 I2C buses each with their own global IRQ line. Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Rashmica Gupta authored
The AST2600 has 208 normal GPIO pins and 36 1.8V GPIOs. Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
Enable the eMMC controller and limit it to 52MHz to avoid the host controller reporting bus error conditions. Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
The AST2600 has an explicit gate for the RMII RCLK for each of the four MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
Andrew Jeffery authored
The AST2500 has an explicit gate for the RMII RCLK for each of the two MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
-
- 30 Sep, 2019 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
-