- 05 Nov, 2016 5 commits
-
-
Eva Rachel Retuya authored
The AD9832/AD9835 is supplied with two power sources: AVDD as analog supply voltage and DVDD as digital supply voltage. Attempt to fetch and enable the regulator 'dvdd'. Bail out if any error occurs. Suggested-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Eva Rachel Retuya authored
Rename regulator 'reg' to 'avdd' so as to be clear what regulator it stands for specifically. Also, update the goto label accordingly. Signed-off-by:
-
Eva Rachel Retuya authored
The AD7190/AD7192/AD7193/AD7195 is supplied with two power sources: AVdd as analog supply voltage and DVdd as digital supply voltage. Attempt to fetch and enable the regulator 'dvdd'. Bail out if any error occurs. Suggested-by:
-
Eva Rachel Retuya authored
Currently, the affected drivers ignore all errors from regulator_get(). The way it is now, it also breaks probe deferral (EPROBE_DEFER). The correct behavior is to propagate the error to the upper layers so they can handle it accordingly. Rework the regulator handling so that it matches the standard behavior. If the specific design uses a static always-on regulator and does not explicitly specify it, regulator_get() will return the dummy regulator. The following semantic patch was used to apply the change: @r1@ expression reg, dev, en, volt; @@ reg = \(devm_regulator_get\|regulator_get\)(dev, ...); if ( - ! IS_ERR(reg)) + return PTR_ERR(reg); ( - { en = regulator_enable(reg); - if (en) return en; } + + en = regulator_enable(reg); + if (en) { + dev_err(dev, "Failed to enable specified supply\n"); + return en; } | + - { en = regulator_enable(reg); - if (en) return en; - volt = regulator_get_voltage(reg); } + en = regulator_enable(reg); + if (en) { + dev_err(dev, "Failed to enable specified supply\n"); + return en; + } + volt = regulator_get_voltage(reg); ) @r2@ expression arg; @@ - if (!IS_ERR(arg)) regulator_disable(arg); + regulator_disable(arg); Hand-edit the debugging prints with the supply name to become more specific. Suggested-by: -
Eva Rachel Retuya authored
The name passed to devm_regulator_get() should match the name of the supply as specified in the device datasheet. This makes it clear what power supply is being referred to in case of presence of other regulators. Currently, the supply name specified on the affected devices is 'vcc'. Use lowercase version of the datasheet name to specify the supply voltage. Suggested-by:
-
- 01 Nov, 2016 17 commits
-
-
Jonathan Cameron authored
Immutable branch to allow mfd changes to also be available in Lee's MFD tree.
-
Eva Rachel Retuya authored
Introduce defines for shifting and mask under the config register for better readability. Also, introduce helper variables for index calculation. Signed-off-by:
-
Brian Masney authored
in_illuminance_input_target_show(), in_illuminance_input_target_store(), in_illuminance_calibrate_store(), and in_illuminance_lux_table_store() accesses data from the tsl2583_chip struct. Some of these fields can be modified by other parts of the driver concurrently. This patch adds the mutex locking to these sysfs attributes. Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
-
Brian Masney authored
in_illuminance_input_target_store() and in_illuminance_calibrate_store() validated the data from userspace, however it would not return an error code to userspace if an invalid value was passed in. This patch changes these functions so that they return -EINVAL if invalid data is passed in. Signed-off-by:
-
Brian Masney authored
Use the IIO_CONST_ATTR, IIO_DEVICE_ATTR_RW, and IIO_DEVICE_ATTR_WO macros for creating the in_illuminance_calibscale_available, in_illuminance_integration_time_available, in_illuminance_input_target, in_illuminance_calibrate, and in_illuminance_lux_table sysfs entries. Previously these sysfs entries were prefixed with illuminance0_, however they are now prefixed with in_illuminance_ to make these sysfs entries consistent with how the IIO core is creating the other sysfs entries. Signed-off-by:
-
Brian Masney authored
The illuminance0_calibscale sysfs attribute is not currently created by the IIO core. This patch adds the appropriate mask to iio_chan_spec, along with the appropriate data handling in the read_raw() and write_raw() functions, so that the sysfs attribute is created by the IIO core. With this change, this sysfs entry will have its prefix changed from illuminance0_ to in_illuminance_. Signed-off-by:
-
Brian Masney authored
The tsl2583 driver directly creates sysfs attributes that should instead be created by the IIO core on behalf of the driver. This patch adds the iio_chan_spec array, the relevant info_mask elements and the read_raw() and write_raw() functions to take advantage of features provided by the IIO core. These sysfs attributes were migrated with this patch: illuminance0_input, illuminance0_calibbias, illuminance0_integration_time. This also exposes the raw values read from the two channels on the sensor. With this change, these four sysfs entries have their prefix changed from illuminance0_ to in_illuminance_. This is deemed to be acceptable since none of the IIO light drivers in mainline use the illuminance0_ prefix, however 8 of the IIO light drivers in mainline use the in_illuminance_ prefix. Also fix the units of integration_time to meet with the ABI. Signed-off-by:
-
Brian Masney authored
The return value from taos_chip_on() and taos_chip_off() was not checked in taos_luxtable_store() and taos_probe(). This patch adds proper error checking to these function calls. Signed-off-by:
-
Brian Masney authored
IIO devices have a /sys/bus/iio/devices/iio:deviceX/power/ directory that allows viewing and controling various power parameters. The tsl2583 driver also has an additional custom sysfs attribute named power_state that is not needed. This patch removes the redundant power_state sysfs attribute. Signed-off-by:
-
Brian Masney authored
taos_als_calibrate() has a code path where -1 is returned. This patch changes the code so that a proper error code is returned. Signed-off-by:
-
Brian Masney authored
taos_i2c_read() and taos_als_calibrate() does not check to see if the value returned by i2c_smbus_read_byte() was an error code. This patch adds the appropriate error handling. Signed-off-by:
-
Brian Masney authored
Add device tree support for the tsl2583 IIO driver with no custom properties. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
-
Lorenzo Bianconi authored
add support to STMicroelectronics LNG2DM accelerometer to st_accel framework Signed-off-by:
-
Paul Kocialkowski authored
This adds devicetree support for the si7020 iio driver. Since it works well without requiring any additional property, its compatible string is added to the trivial i2c devices bindings list. Signed-off-by:
Paul Kocialkowski <contact@paulk.fr> Acked-by:
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Jonathan Cameron authored
Would have merged this into the original patch as a fixup but I've already pushed that out as an immutable branch for others to use so it'll have to be a separate patch. The original select had a typo as well. Trying to do this via a select was opening a can of worms due to a tree of other elements that would also have needed selecting. A simple depends seems much mroe straight forward and appropriate in this case. Signed-off-by:
-
- 25 Oct, 2016 8 commits
-
-
Enric Balletbo i Serra authored
Check whether the ChromeOS Embedded Controller is a sensor hub and in such case issue a command to get the number of sensors and register them all. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Acked-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Vincent Palatin authored
Use the EC_CMD_GET_FEATURES message to check the supported features for each MCU. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> [tomeu: adapted to changes in mainline] Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> [enric: remove references to USB PD feature and do it more generic] Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Enric Balletbo i Serra authored
Handle 3d contiguous sensors like Accelerometers, Gyroscope and Magnetometer that are presented by the ChromeOS EC Sensor hub. Signed-off-by:
-
Enric Balletbo i Serra authored
Add the core functions to be able to support the sensors attached behind the ChromeOS Embedded Controller and used by other IIO cros-ec sensor drivers. The cros_ec_sensor_core driver matches with current driver in ChromeOS 4.4 tree, so it includes all the fixes at the moment. The support for this driver was made by Gwendal Grignou. The original patch and all the fixes has been squashed and rebased on top of mainline. Signed-off-by:
-
Arnd Bergmann authored
As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other than 2 or 4 will result in undefined behavior: drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read': drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This probably cannot happen, but returning -EINVAL here is appropriate and makes gcc happy and the code more robust. Fixes: 231147ee ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
As found by "gcc -Wmaybe-uninitialized", the latest change to the driver lacked an initalization for the return code in one of the added cases: drivers/staging/iio/cdc/ad7746.c: In function ‘ad7746_read_raw’: drivers/staging/iio/cdc/ad7746.c:655:2: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets it to IIO_VAL_INT, which I think is what we want here. Fixes: 2296c062 ("staging: iio: cdc: ad7746: implement IIO_CHAN_INFO_SAMP_FREQ") Signed-off-by:
-
Linus Walleij authored
This adds a new driver for the Invensense MPU-3050 gyroscope. This driver is based on information from the rough input driver in drivers/input/misc/mpu3050.c and the scratch misc driver posted by Nathan Royer in 2011. Some years have passed but this is finally a fully-fledged driver for this gyroscope. It was developed and tested on the Qualcomm APQ8060 Dragonboard. The driver supports both raw and buffered input. It also supports the internal trigger mechanism by registering a trigger that can fire in response to the internal sample engine of the component. In addition to reading out the gyroscope sensor values, the driver also supports reading the temperature from the sensor. The driver currently only supports I2C but the MPU-3050 can also be used from SPI, so the I2C portions are split in their own file and we just use regmap to access all registers, so it will be trivial to plug in SPI support if/when someone has a system requiring this. To conserve power, the driver utilizes the runtime PM framework and will put the sensor in off mode and disable the regulators when unused, after a timeout of 10 seconds. The fullscale can be set for the sensor to 250, 500, 1000 or 2000 deg/s. This corresponds to scale values of rougly 0.000122, 0.000275, 0.000512 or 0.001068. By writing such values (or close to these) into "in_anglevel_scale", the corresponding fullscale can be chosen. It will default to 2000 deg/s (~35 rad/s). The gyro component can have DC offsets on all axes. These can be compensated using the standard sysfs ABI property "in_anglevel_[xyz]_calibbias". This is in positive/negative values of the raw values, so a suitable calibration bias can be determined by userspace by reading the "in_anglevel_[xyz]_raw" for a few iterations while holding the sensor still, create an average integer, and writing the negative inverse of that into "in_anglevel_[xyz]_calibbias". After this the hardware will automatically subtract the bias, also when using buffered readings. Since the MPU-3050 has an outgoing I2C port it needs to act as an I2C mux. This means that the device is switching I2C traffic to devices beyond it. On my system this is the only way to reach the accelerometer. The "sensor fusion" ability of the MPU-3050 to directly talk to the device on the outgoing I2C port is currently not used by the driver, but it has code to allow I2C traffic to pass through so that the Linux kernel can reach the device on the other side with a kernel driver. Example usage with the native trigger: $ generic_buffer -a -c10 -n mpu3050 iio device number being used is 0 iio trigger number being used is 0 No channels are enabled, enabling all channels Enabling: in_anglvel_z_en Enabling: in_timestamp_en Enabling: in_anglvel_y_en Enabling: in_temp_en Enabling: in_anglvel_x_en /sys/bus/iio/devices/iio:device0 mpu3050-dev0 29607.142578 -0.117493 0.074768 0.012817 180788797150 29639.285156 -0.117493 0.076904 0.013885 180888982335 29696.427734 -0.116425 0.076904 0.012817 180989178039 29742.857422 -0.117493 0.076904 0.012817 181089377742 29764.285156 -0.116425 0.077972 0.012817 181189574187 29860.714844 -0.115356 0.076904 0.012817 181289772705 29864.285156 -0.117493 0.076904 0.012817 181389971520 29910.714844 -0.115356 0.076904 0.013885 181490170483 29917.857422 -0.116425 0.076904 0.011749 181590369742 29975.000000 -0.116425 0.076904 0.012817 181690567075 Disabling: in_anglvel_z_en Disabling: in_timestamp_en Disabling: in_anglvel_y_en Disabling: in_temp_en Disabling: in_anglvel_x_en The first column is the temperature in millidegrees, then the x,y,z axes in succession followed by the timestamp. Also tested successfully using the HRTimer trigger. Cc: Nick Vaccaro <nvaccaro@google.com> Cc: Ge Gao <ggao@invensense.com> Cc: Anna Si <asi@invensense.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Crestez Dan Leonard <leonard.crestez@intel.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Cc: Gregor Boirie <gregor.boirie@parrot.com> Cc: Peter Rosin <peda@axentia.se> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the MPU-3050 gyroscope. Since it is the first set of bindings for a gyroscope, the folder for it is also created. Cc: devicetree@vger.kernel.org Cc: Peter Rosin <peda@axentia.se> Acked-by:
-
- 24 Oct, 2016 10 commits
-
-
Pankaj Bharadiya authored
gb_audio_manager_module_descriptor's intf_id field maintains the information about the interface on which module is connected hence having an extra slot field is redundant. Thus remove the slot field and its associated code. Signed-off-by:
Pankaj Bharadiya <pankaj.bharadiya@gmail.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Vaibhav Agarwal <vaibhav.sr@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rahul Krishnan authored
This patch fixes the following checkpath.pl warning WARNING: Block comments use a trailing */ on a separate line Signed-off-by:
Rahul Krishnan <mrahul.krishnan@gmail.com> Acked-by:
-
Rui Miguel Silva authored
Fix size field of arpc message request by using the header size and not the pointer size. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Elise Lennion authored
Fix checkpatch warning: WARNING: Prefer kstrto<type> to single variable sscanf kstrto* is designed to convert string to numerical value and makes it easier to understand what the code does. Signed-off-by:
Elise Lennion <elise.lennion@gmail.com> Reviewed-by:
Mark Greer <mgreer@animalcreek.com> Signed-off-by:
-
Elise Lennion authored
The removed parentheses are unnecessary and don't add readability. Found using Coccinelle semantic patch: @@ expression e, e1, e2; @@ e &= ( (e1 == e2) | - (e1) + e1 ) @@ expression e, e1, e2; @@ e |= ( (e1 == e2) | - (e1) + e1 ) Signed-off-by: -
Elise Lennion authored
The removed parentheses are unnecessary and don't add readability. Found using Coccinelle semantic patch: @@ expression e, e1, e2; @@ e += ( (e1 == e2) | - (e1) + e1 ) @@ expression e, e1, e2; @@ e = ( (e1 == e2) | - (e1) + e1 ) Signed-off-by: -
Mihaela Muraru authored
This patch add const qualifier at the declaration of the structure. The structure become a read-only data, this increase the security. Found with Coccinelle: @r disable optional_qualifier@ identifier s,i; @@ * static struct s i ={...}; Signed-off-by:Mihaela Muraru <mihaela.muraru21@gmail.com> Signed-off-by:
-
Elise Lennion authored
The removed parentheses are unnecessary and don't add readability. Found using Coccinelle semantic patch: @@ expression e, e1, e2; @@ e = ( (e1 == e2) | - (e1) + e1 ) Signed-off-by:Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Michael Zoran authored
When compiling vchiq_core.c for 64 bit, the compiler emits a few warnings that are not actual issues. This change adds a few casts to remove the extra unnecessary warnings. Signed-off-by:
Michael Zoran <mzoran@crowfest.net> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Michael Zoran authored
A VCHIQ_SERVICE_HANDLE_T which is an int is stuffed into a VCHI_SERVICE_HANDLE_T which is a pointer, passed around, then converted back to a VCHIQ_SERVICE_HANDLE_T. Since the data is always actually a VCHIQ_SERVICE_HANDLE_T(int), never actually a pointer, it is safe to simply cast the two back in forth. Note that pointers are never stuffed into an int. Signed-off-by:
-
