- 25 Oct, 2013 40 commits
-
-
Anand Kumar Santhanam authored
Updated pci id table with device, vendor, subdevice and subvendor ids for 8074, 8076, 8077 SAS/SATA 12G controllers. Added 12G related macros. Signed-off-by: Anandkumar.Santhanam@pmcs.com Reviewed-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Chris Leech authored
It seems some iSCSI targets (including the Linux kernel target) close the TCP connection from the target side immediately after processing a session logout. When a TCP FIN comes in right after the iSCSI logout response, iscsi_sw_sk_state_check sees the local socket as not yet being in CLOSE_WAIT or CLOSE and logs an error. But the initiator would close the connection right after processing the logout response anyway, and the error is confusing to admins who just requested that the session be shut down. This adds a check of the session state, and suppresses the error if we are in the process of logging out. Signed-off-by:
Chris Leech <cleech@redhat.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Oliver Neukum authored
It makes no sense to flush the cache of a device without medium. Errors during suspend must be handled according to their causes. Errors due to missing media or unplugged devices must be ignored. Errors due to devices being offlined must also be ignored. The error returns must be modified so that the generic layer understands them. [jejb: fix up whitespace and other formatting problems] Signed-off-by:
Oliver Neukum <oneukum@suse.de> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Bernd Schubert authored
Somehow older areca firmware versions have issues with scsi_get_vpd_page() and a large buffer, the firmware seems to crash and the scsi error-handler will start endless recovery retries. Limiting the buf-size to 64-bytes fixes this issue with older firmware versions (<1.49 for my controller). Fixes a regression with areca controllers and older firmware versions introduced by commit: 66c28f97Reported-by:
Nix <nix@esperi.org.uk> Tested-by:
Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Cc: stable@vger.kernel.org # delay inclusion for 2 months for testing Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Akinobu Mita authored
Each member in data integrity field tuple is big-endian. But the endianness of the values being compared with these members are not annotated. So this fixes these sparse warnings. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
-
Akinobu Mita authored
In the module initialization, invalid value for guard module parameter is detected by the following check: if (scsi_debug_guard > 1) { printk(KERN_ERR "scsi_debug_init: guard must be 0 or 1\n"); return -EINVAL; } But this check isn't enough, because the type of scsi_debug_guard is 'int' and scsi_debug_guard could be a negative value. This fixes it by changing the type of scsi_debug_guard to 'unsigned int' instead of adding extra check for a negative value. Reported-by:Joe Perches <joe@perches.com> Signed-off-by:
-
Akinobu Mita authored
If data integrity support is enabled, prot_verify_write() is called in response to WRITE commands and it verifies protection info from prot_sglist by comparing against data sglist, and copies protection info to dif_storep. When multiple blocks are transfered by a WRITE command, it verifies and copies these blocks one by one. So if it fails to verify protection info in the middle of blocks, the actual data transfer to fake_storep isn't proceeded at all although protection info for some blocks are already copied to dif_storep. Therefore, it breaks the data integrity between fake_storep and dif_storep. This fixes it by ensuring that copying protection info to dif_storep is done after all blocks are successfully verified. Reusing dif_copy_prot() with supporting the opposite direction simplifies this fix. Signed-off-by:
-
Akinobu Mita authored
If data integrity support is enabled, prot_verify_read() is called in response to READ commands and it verifies protection info from dif_storep by comparing against fake_storep, and copies protection info to prot_sglist. This factors out the portion of copying protection info into a separate function. It will also be reused in the next change after supporting the opposite direction (copying prot_sglist to dif_storep). Signed-off-by:
-
Akinobu Mita authored
If the module parameter virtual_gb is greater than 0, the READ command may request the blocks which exceed actual ramdisk storage (fake_storep). prot_verify_read() should treat those blocks as wrap around the end of fake_storep. But it actually causes fake_storep and dif_storep buffer overruns. This fixes these buffer overruns. In order to simplify the fix, this also introduces fake_store() and dif_store() which return corresponding wrap around addresses. Signed-off-by:
-
Jayamohan Kallickal authored
Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
-
Jayamohan Kallickal authored
If certain configuration it is possible that ICD range is not page-aligned. SGL posting failed in these configuration and driver load was not success. This fix aligns ICD range values and SGL posting for IO is done. Signed-off-by:
-
Jayamohan Kallickal authored
Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
-
Jayamohan Kallickal authored
When iSCSI stack invokes Abort or Reset handlers, the aborted tasks Invalid Bit in WRB needs to be set. Else FW will not be aware of the command invalidated which leads to BAD_WRB error posted by FW. Signed-off-by:
-
Jayamohan Kallickal authored
When MBX_Cmd completion happens with error code Insufficient Buffer, the MBX_Cmd is posted again with the new buffer size posted by FW. Signed-off-by:
-
Jayamohan Kallickal authored
Signed-off-by:
-
Jayamohan Kallickal authored
The MSIx to be created for SKH-R adapter should be based on eq_count returned by get_fw_config. Signed-off-by:
-
Jayamohan Kallickal authored
Signed-off-by:
-
Jayamohan Kallickal authored
Display CID available on each iSCSI Fn which can be used to offload a connection. The display is split across available CID on each chute. Signed-off-by:
-
Jayamohan Kallickal authored
Signed-off-by:
-
Jayamohan Kallickal authored
The connection is offload to each chute in a round-robin manner if both the chute is loaded with iSCSI protocol Signed-off-by:
-
Jayamohan Kallickal authored
Configuration parameters returns the number of connection that can be offloaded one each chute. Signed-off-by:
-
Jayamohan Kallickal authored
Configuration parameters return number of CID each chute supports. The WRB_Q is created for the passed CID count. If both the Chute has iSCSI Protocol then WRB_Q creation is in a round robin mechanism. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by:
-
Jayamohan Kallickal authored
Initialization of SGL and related PAGE posting is to be done for the chute. Based on configuration value of each Chute,SGL initialization and page posting is done. For BE-X family iSCSI protocol is loaded only on single chute Signed-off-by:
-
Jayamohan Kallickal authored
Template HDR is created for each chute which has iSCSI Protocol loaded. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by:
-
Jayamohan Kallickal authored
DEF_Q[HDR/DATA] is created on the chute on which iSCSI Protocol is loaded. When a connection is offloaded, the DEF_Q HDR/Data ID needs to be passed. FW posts ASYNC message received from target on the passed DEF_Q. Connection can be offloaded on any of the chute so DEF_Q is created on each Chute. Change in the ASYNC path initialization based on the configuration parameters returned for each chute. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by:
-
Jayamohan Kallickal authored
On the adapter iSCSI protocol can be loaded on either one or both the CHUTE.Check on which CHUTE iSCSI Protocol is loaded and get configuration parameters based on which driver initization is done. For BE-X family iSCSI protocol is loaded only on single chute. Signed-off-by:
-
Jayamohan Kallickal authored
The timeout set in MBX_CMD is 100sec and the ready bit checking in BMBX mode is done for 4sec. After 4sec the task is scheduled out for 5 secs to avoid kernel soft lockup stack trace. The loop of 4sec ready bit check and then schedule out is done until the following conditon occur - The Ready Bit is Set - The timeout set in MBX_CMD expires Signed-off-by:
-
Jayamohan Kallickal authored
The default pdu is a common resource and needs to be protected while manipulating it. Signed-off-by:
-
Jayamohan Kallickal authored
- Removed the check of MaxXmitDSL == 0 as this is not a possible case. - Update connection offload data structure for SKH-R adapters. Signed-off-by:
-
Jayamohan Kallickal authored
Storing MAC ADDR of each function in it's priv structure to avoid issuing MAC_ADDR get IOCTL. Based on a flag set/unset it's decided if MAC_ADDR is stored in priv structure or IOCTL needs to be issued. Signed-off-by:
-
Jayamohan Kallickal authored
When MBX CMD is posted in MCCQ and if command times out,during mccq resource cleanup for the timed out command mccq->count was not decremented. The led to BUG_ON being hit. Signed-off-by:
-
Jayamohan Kallickal authored
Allocating memory in the Host which will be used by the TOE functionality during Session Offload. This fix will allow performance improvement as adapter memory contention will be reduced. Signed-off-by:
-
Eddie Wai authored
Signed-off-by:
Eddie Wai <eddie.wai@broadcom.com> Signed-off-by:
-
Eddie Wai authored
Signed-off-by:
-
Eddie Wai authored
[v2] - removed the interface->enabled flag setting which prevented the fcoe ctlr link from being brought back up after a MTU change A rtnl_lock deadlock was observed from the rmmod thread where it tries to unregister the fcoe_ctlr device. This unregistration triggered a flush of the sysfs queue of the associated ctlr and led to a call to the set_fcoe_ctlr_enabled routine. This will eventually propagate down to call the bnx2fc_disable routine and contented for the rtnl_lock in the same context. This patch creates a subset of the bnx2fc_enable/disable routine which removes the unnecesary rtnl_lock and the bnx2fc_dev_lock acquisition from the set_fcoe_ctlr_enabled path. kernel: INFO: task rmmod:7874 blocked for more than 120 seconds. kernel: Tainted: G W --------------- 2.6.32-415.0.1.el6.x86_64 #1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: rmmod D 000000000000000f 0 7874 6518 0x00000080 kernel: ffff88022158f7d8 0000000000000086 0000000000000000 0000000000000000 kernel: ffff88023fe72600 ffff88043c74d410 ffff88043c74d400 ffff88043c74d000 kernel: ffff88021ecbe5f8 ffff88022158ffd8 000000000000fbc8 ffff88021ecbe5f8 kernel: Call Trace: kernel: [<ffffffff81525985>] schedule_timeout+0x215/0x2e0 kernel: [<ffffffff810680c0>] ? pick_next_task_fair+0xd0/0x130 kernel: [<ffffffff81524858>] ? schedule+0x178/0x3b2 kernel: [<ffffffff81525603>] wait_for_common+0x123/0x180 kernel: [<ffffffff81066b40>] ? default_wake_function+0x0/0x20 kernel: [<ffffffff811a486e>] ? ifind_fast+0x5e/0xb0 kernel: [<ffffffff8152571d>] wait_for_completion+0x1d/0x20 kernel: [<ffffffff81203868>] sysfs_addrm_finish+0x228/0x270 kernel: [<ffffffff812014ab>] sysfs_hash_and_remove+0x5b/0x90 kernel: [<ffffffff812056af>] sysfs_remove_group+0x5f/0x100 kernel: [<ffffffff81367e8b>] device_remove_groups+0x3b/0x60 kernel: [<ffffffff8136811d>] device_remove_attrs+0x3d/0x90 kernel: [<ffffffff81368295>] device_del+0x125/0x1e0 kernel: [<ffffffff81368372>] device_unregister+0x22/0x60 kernel: [<ffffffffa038ead2>] fcoe_ctlr_device_delete+0xe2/0xf4 [libfcoe] kernel: [<ffffffffa03c43cb>] bnx2fc_interface_release+0x5b/0x90 [bnx2fc] kernel: [<ffffffffa03c4370>] ? bnx2fc_interface_release+0x0/0x90 [bnx2fc] kernel: [<ffffffff812835e7>] kref_put+0x37/0x70 kernel: [<ffffffffa03c4192>] __bnx2fc_destroy+0x72/0xa0 [bnx2fc] kernel: [<ffffffffa03c5265>] bnx2fc_ulp_exit+0xf5/0x160 [bnx2fc] <- got bnx2fc_dev_lock mutex_lock kernel: [<ffffffffa03b03c6>] cnic_ulp_exit+0xb6/0xc0 [cnic] kernel: [<ffffffffa03b5418>] cnic_netdev_event+0x368/0x370 [cnic] kernel: [<ffffffffa038c56c>] ? fcoe_del_netdev_mapping+0x8c/0xa0 [libfcoe] kernel: [<ffffffff8152a6e5>] notifier_call_chain+0x55/0x80 kernel: [<ffffffff810a0a46>] raw_notifier_call_chain+0x16/0x20 kernel: [<ffffffff81459beb>] call_netdevice_notifiers+0x1b/0x20 kernel: [<ffffffff8145ab34>] rollback_registered_many+0x154/0x280 kernel: [<ffffffff8145ad08>] rollback_registered+0x38/0x50 kernel: [<ffffffff8145ad78>] unregister_netdevice_queue+0x58/0xa0 kernel: [<ffffffff8145add0>] unregister_netdevice+0x10/0x20 kernel: [<ffffffff8145adfe>] unregister_netdev+0x1e/0x30 <- got rtnl_lock!!!!!!!!! kernel: [<ffffffffa0122278>] __bnx2x_remove+0x48/0x270 [bnx2x] <- got & rel rtnl_lock kernel: [<ffffffffa0122554>] bnx2x_remove_one+0x44/0x80 [bnx2x] kernel: [<ffffffff812a3af7>] pci_device_remove+0x37/0x70 kernel: [<ffffffff8136b2ef>] __device_release_driver+0x6f/0xe0 kernel: [<ffffffff8136b428>] driver_detach+0xc8/0xd0 kernel: [<ffffffff8136a22e>] bus_remove_driver+0x8e/0x110 kernel: [<ffffffff8136bc12>] driver_unregister+0x62/0xa0 kernel: [<ffffffff812a3e04>] pci_unregister_driver+0x44/0xb0 kernel: [<ffffffffa0191954>] bnx2x_cleanup+0x18/0x73 [bnx2x] kernel: [<ffffffff810b8be4>] sys_delete_module+0x194/0x260 kernel: [<ffffffff810e1347>] ? audit_syscall_entry+0x1d7/0x200 kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Signed-off-by: -
Eddie Wai authored
In the case when a SCSI_CMD times out, bnx2fc will initiate the sending of the ABTS. However, if the SCSI layer's SCSI command timer also times out, it'll instantiate a task abort of the same xid. The race condition this patch tries to fix is as follows: SCSI_CMD timeout (20s) thread 1 thread 2 send ABTS rx ABTS cmpl task abort_eh explicit LOGO since ABTS was engaged CLEANUP cmpl SCSI_CMD cmpl (ABTS cmpl) instantiate RRQ wait 10s attempt to send RRQ (because of LOGO, it wouldn't continue) Note that there is no call to scsi_done for this SCSI_CMD cmpletion in this path. The patch changes the path of execution to call scsi_done immediately instead of instantiating the RRQ. Signed-off-by: -
Adheer Chandravanshi authored
Add support to get local CHAP - index, username and password, sysfs params of iscsi session corresponding to flash target entry. Signed-off-by:
Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
-
Adheer Chandravanshi authored
Provide support to add/update the CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by:
-
Adheer Chandravanshi authored
For offload iSCSI like qla4xxx, CHAP entries are stored in adapter's flash. This patch adds support to add/update CHAP entries in adapter's flash using iscsi tools, like Open-iSCSI. Signed-off-by:
-
Adheer Chandravanshi authored
To write a CHAP entry in adapter's flash calculate the offset based on the type of adapter. Signed-off-by:
-
