The signal setup code and evlist__prepare_workload() can be used for
other subcommands.  Let's move them out of the __cmd_ftrace().  Then
it doesn't need to pass argc and argv.

On the other hand, select_tracer() is specific to the 'trace'
subcommand so it'd better moving it into the __cmd_ftrace().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211215185154.360314-3-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is a preparation to add more sub-commands for ftrace.  The
'trace' subcommand does the same thing when no subcommand is given.

Committer testing:

The previous mode, i.e. no subcommand and the new 'perf ftrace trace'
are equivalent:

  # perf ftrace -G check_preempt_curr sleep 0.00001
  # tracer: function_graph
  #
  # CPU  DURATION                  FUNCTION CALLS
  # |     |   |                     |   |   |   |
   25)               |  check_preempt_curr() {
   25)               |    resched_curr() {
   25)               |      native_smp_send_reschedule() {
   25)               |        default_send_IPI_single_phys() {
   25)   0.110 us    |          __default_send_IPI_dest_field();
   25)   0.490 us    |        }
   25)   0.640 us    |      }
   25)   0.850 us    |    }
   25)   2.060 us    |  }
  # perf ftrace trace -G check_preempt_curr sleep 0.00001
  # tracer: function_graph
  #
  # CPU  DURATION                  FUNCTION CALLS
  # |     |   |                     |   |   |   |
   10)               |  check_preempt_curr() {
   10)               |    resched_curr() {
   10)               |      native_smp_send_reschedule() {
   10)               |        default_send_IPI_single_phys() {
   10)   0.080 us    |          __default_send_IPI_dest_field();
   10)   0.460 us    |        }
   10)   0.610 us    |      }
   10)   0.830 us    |    }
   10)   2.020 us    |  }
  #
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211215185154.360314-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When reading a perf.data file with register values, there is a mismatch
between the names and the values of the registers because the tool is
built using only the register names from the local architecture.

Reading a perf.data file that was recorded on ARM64, gives the following
erroneous output on an X86 machine:

  # perf report -i perf_arm64.data -D
  [...]
  24661932634451 0x698 [0x21d0]: PERF_RECORD_SAMPLE(IP, 0x1): 43239/43239: 0xffffc5be8f100f98 period: 1 addr: 0
  ... user regs: mask 0x1ffffffff ABI 64-bit
  .... AX    0x0000ffffd1515817
  .... BX    0x0000ffffd1515480
  .... CX    0x0000aaaadabf6c80
  .... DX    0x000000000000002e
  .... SI    0x0000000040100401
  .... DI    0x0040600200000080
  .... BP    0x0000ffffd1510e10
  .... SP    0x0000000000000000
  .... IP    0x00000000000000dd
  .... FLAGS 0x0000ffffd1510cd0
  .... CS    0x0000000000000000
  .... SS    0x0000000000000030
  .... DS    0x0000ffffa569a208
  .... ES    0x0000000000000000
  .... FS    0x0000000000000000
  .... GS    0x0000000000000000
  .... R8    0x0000aaaad3de9650
  .... R9    0x0000ffffa57397f0
  .... R10   0x0000000000000001
  .... R11   0x0000ffffa57fd000
  .... R12   0x0000ffffd1515817
  .... R13   0x0000ffffd1515480
  .... R14   0x0000aaaadabf6c80
  .... R15   0x0000000000000000
  .... unknown 0x0000000000000001
  .... unknown 0x0000000000000000
  .... unknown 0x0000000000000000
  .... unknown 0x0000000000000000
  .... unknown 0x0000000000000000
  .... unknown 0x0000ffffd1510d90
  .... unknown 0x0000ffffa5739b90
  .... unknown 0x0000ffffd1510d80
  .... XMM0  0x0000ffffa57392c8
   ... thread: perf-exec:43239
   ...... dso: [kernel.kallsyms]

As can be seen, the register names correspond to X86 registers, even
though the perf.data file was recorded on an ARM64 system. After this
patch, the output of the command displays the correct register names:

  # perf report -i perf_arm64.data -D
  [...]
  24661932634451 0x698 [0x21d0]: PERF_RECORD_SAMPLE(IP, 0x1): 43239/43239: 0xffffc5be8f100f98 period: 1 addr: 0
  ... user regs: mask 0x1ffffffff ABI 64-bit
  .... x0    0x0000ffffd1515817
  .... x1    0x0000ffffd1515480
  .... x2    0x0000aaaadabf6c80
  .... x3    0x000000000000002e
  .... x4    0x0000000040100401
  .... x5    0x0040600200000080
  .... x6    0x0000ffffd1510e10
  .... x7    0x0000000000000000
  .... x8    0x00000000000000dd
  .... x9    0x0000ffffd1510cd0
  .... x10   0x0000000000000000
  .... x11   0x0000000000000030
  .... x12   0x0000ffffa569a208
  .... x13   0x0000000000000000
  .... x14   0x0000000000000000
  .... x15   0x0000000000000000
  .... x16   0x0000aaaad3de9650
  .... x17   0x0000ffffa57397f0
  .... x18   0x0000000000000001
  .... x19   0x0000ffffa57fd000
  .... x20   0x0000ffffd1515817
  .... x21   0x0000ffffd1515480
  .... x22   0x0000aaaadabf6c80
  .... x23   0x0000000000000000
  .... x24   0x0000000000000001
  .... x25   0x0000000000000000
  .... x26   0x0000000000000000
  .... x27   0x0000000000000000
  .... x28   0x0000000000000000
  .... x29   0x0000ffffd1510d90
  .... lr    0x0000ffffa5739b90
  .... sp    0x0000ffffd1510d80
  .... pc    0x0000ffffa57392c8
   ... thread: perf-exec:43239
   ...... dso: [kernel.kallsyms]

Tester comments:

Athira reports:

"Looks good to me. Tested this patchset in powerpc by capturing regs in
powerpc and doing perf report to read the data from x86."
Reported-by: Alexandre Truong <alexandre.truong@arm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20211207180653.1147374-4-german.gomez@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The registers for ARM and ARM64 are enumerated using two enums that have
the same name. In order to be able to import both headers, the name of
one can be replaced using the C preprocessor like so:

  #define perf_event_arm_regs perf_event_arm64_regs
  #include <asm/perf_regs.h>
  #undef perf_event_arm_regs

This patch updates all imports of ARM64's perf_regs.h in order to
prevent the naming collision.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20211207180653.1147374-3-german.gomez@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Refactors code for gathering PID infos, it creates the function
nsinfo__get_nspid() to parse process 'status' node in folder '/proc'.

Base on the refactoring, this patch introduces a new helper
nsinfo__is_in_root_namespace(), it returns true when the caller runs in
the root PID namespace.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonatan Goldschmidt <yonatan.goldschmidt@granulate.io>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211212134721.1721245-2-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There is a spelling mistake in a __T_VERBOSE message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211212222122.478537-1-colin.i.king@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use IS_ERR_OR_NULL() to make the code cleaner.
Also if the priv is NULL, it's improper to call PTR_ERR(priv).
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: unlisted-recipients
Link: http://lore.kernel.org/lkml/20211212135613.20000-1-linmq006@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There are two checks, one is for size when running without admin, but
this one is covered by the driver and reported on in more detail here
(builtin-record.c):

  pr_err("Permission error mapping pages.\n"
         "Consider increasing "
         "/proc/sys/kernel/perf_event_mlock_kb,\n"
         "or try again with a smaller value of -m/--mmap_pages.\n"
         "(current value: %u,%u)\n",

This had the effect of artificially limiting the aux buffer size to a
value smaller than what was allowed because perf_event_mlock_kb wasn't
taken into account.

The second is to check for a power of two, but this is covered here
(evlist.c):

  pr_info("rounding mmap pages size to %s (%lu pages)\n",
          buf, pages);
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211208115435.610101-1-james.clark@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A previous commit adds pmu events into the files

  armv8-common-and-microarch.json
  armv8-recommended.json

that are actually specified in an armv9 reference supplement, not armv8.
As such, naming the files with the armv8 prefix seems artificial.

This patch renames the files to reflect that these two files are for
arch std events regardless of whether they are defined in armv8 or
armv9.
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211210123706.7490-3-andrew.kilroy@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Updates the common and microarch json file to add counters available in
the Arm Neoverse N2 chip, but should also apply to other ArmV8 and ArmV9
cpus.  Specified in ArmV8 architecture reference manual

  https://developer.arm.com/documentation/ddi0487/gb/?lang=en

Some of the counters added to armv8-common-and-microarch.json are
specified in the ArmV9 architecture reference manual supplement
(issue A.a):

  https://developer.arm.com/documentation/ddi0608/aa

The additional ArmV9 counters are

  TRB_WRAP
  TRCEXTOUT0
  TRCEXTOUT1
  TRCEXTOUT2
  TRCEXTOUT3
  CTI_TRIGOUT4
  CTI_TRIGOUT5
  CTI_TRIGOUT6
  CTI_TRIGOUT7

This patch also adds files in pmu-events/arch/arm64/arm/neoverse-n2 for
perf list to output the counter names in categories.

Counters on the Neoverse N2 are stated in its reference manual:

  https://developer.arm.com/documentation/102099/0000Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211210123706.7490-2-andrew.kilroy@arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Compiling tools/perf/dlfilters/dlfilter-test-api-v0.c result in:

	checking for stdlib.h... dlfilters/dlfilter-test-api-v0.c: In function ‘filter_event’:
	dlfilters/dlfilter-test-api-v0.c:311:29: warning: unused variable ‘d’ [-Wunused-variable]
	  311 |         struct filter_data *d = data;
	      |

So remove the  variable now.
Reviewed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211123211821.132924-1-carnil@debian.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use total latency info in the SPE counter packet as sample weight so
that we can see it in local_weight and (global) weight sort keys.

Maybe we can use PERF_SAMPLE_WEIGHT_STRUCT to support ins_lat as well
but I'm not sure which latency it matches.  So just adding total latency
first.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211201220855.1260688-1-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The output of 'perf bench' gets buffered when I pipe it to a file or to
tee, in such a way that I can see it only at the end.

E.g.

  $ perf bench internals synthesize -t
  < output comes out fine after each test run >

  $ perf bench internals synthesize -t | tee file.txt
  < output comes out only at the end of all tests >

This patch resolves this issue for 'bench' and 'test' subcommands.

See, also:

  $ perf bench mem all | tee file.txt
  $ perf bench sched all | tee file.txt
  $ perf bench internals all -t | tee file.txt
  $ perf bench internals all | tee file.txt

Committer testing:

It really gets staggered, i.e. outputs in bursts, when the buffer fills
up and has to be drained to make up space for more output.
Suggested-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211119061409.78004-1-sohaib.amhmd@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up fixes.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull ceph fixes from Ilya Dryomov:
 "An SGID directory handling fix (marked for stable), a metrics
  accounting fix and two fixups to appease static checkers"

* tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client:
  ceph: fix up non-directory creation in SGID directories
  ceph: initialize pathlen variable in reconnect_caps_cb
  ceph: initialize i_size variable in ceph_sync_read
  ceph: fix duplicate increment of opened_inodes metric

Pull s390 fixes from Heiko Carstens:

 - Add missing handling of R_390_PLT32DBL relocation type in
   arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3
   generate such relocation entries, which our relocation code silently
   ignores, and which finally will result in an endless loop within the
   purgatory code in case of kexec.

 - Add proper handling of errors and print error messages when applying
   relocations

 - Fix duplicate tracking of irq nesting level in entry code

 - Let recordmcount.pl also look for jgnop mnemonic. Starting with
   binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which
   breaks mcount location detection. This is only a problem if used with
   compilers older than gcc 9, since with gcc 9 and newer compilers
   recordmcount.pl is not used anymore.

 - Remove preempt_disable()/preempt_enable() pair in
   kprobe_ftrace_handler() which was done for all architectures except
   for s390.

 - Update defconfig

* tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  recordmcount.pl: look for jgnop instruction as well as bcrl on s390
  s390/entry: fix duplicate tracking of irq nesting level
  s390: enable switchdev support in defconfig
  s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add()
  s390/ftrace: remove preempt_disable()/preempt_enable() pair
  s390/kexec_file: fix error handling when applying relocations
  s390/kexec_file: print some more error messages

Merge tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fix from Wei Liu:
 "Build fix from Randy Dunlap"

* tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv: utils: add PTP_1588_CLOCK to Kconfig to fix build

Pull virtio fixes from Michael Tsirkin:
 "Misc virtio and vdpa bugfixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa: Consider device id larger than 31
  virtio/vsock: fix the transport to work with VMADDR_CID_ANY
  virtio_ring: Fix querying of maximum DMA mapping size for virtio device
  virtio: always enter drivers/virtio/
  vduse: check that offset is within bounds in get_config()
  vdpa: check that offsets are within bounds
  vduse: fix memory corruption in vduse_dev_ioctl()

The driver is not ready yet to be compiled as a module since it depends
on some symbols not exported on MIPS.  We have the following current
problems:

  Building mips:allmodconfig ... failed
  --------------
  Error log:
  ERROR: modpost: missing MODULE_LICENSE() in drivers/pci/controller/pcie-mt7621.o
  ERROR: modpost: "mips_cm_unlock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined!
  ERROR: modpost: "mips_cpc_base" [drivers/pci/controller/pcie-mt7621.ko] undefined!
  ERROR: modpost: "mips_cm_lock_other" [drivers/pci/controller/pcie-mt7621.ko] undefined!
  ERROR: modpost: "mips_cm_is64" [drivers/pci/controller/pcie-mt7621.ko] undefined!
  ERROR: modpost: "mips_gcr_base" [drivers/pci/controller/pcie-mt7621.ko] undefined!

Temporarily move from 'tristate' to 'bool' until a better solution is
ready.

Also RALINK is redundant because SOC_MT7621 already depends on it.
Hence, simplify condition.

Fixes: 2bdd5238 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver").
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-and-Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 054aa8d4 ("fget: check that the fd still exists after getting
a ref to it") fixed a race with getting a reference to a file just as it
was being closed.  It was a fairly minimal patch, and I didn't think
re-checking the file pointer lookup would be a measurable overhead,
since it was all right there and cached.

But I was wrong, as pointed out by the kernel test robot.

The 'poll2' case of the will-it-scale.per_thread_ops benchmark regressed
quite noticeably.  Admittedly it seems to be a very artificial test:
doing "poll()" system calls on regular files in a very tight loop in
multiple threads.

That means that basically all the time is spent just looking up file
descriptors without ever doing anything useful with them (not that doing
'poll()' on a regular file is useful to begin with).  And as a result it
shows the extra "re-check fd" cost as a sore thumb.

Happily, the regression is fixable by just writing the code to loook up
the fd to be better and clearer.  There's still a cost to verify the
file pointer, but now it's basically in the noise even for that
benchmark that does nothing else - and the code is more understandable
and has better comments too.

[ Side note: this patch is also a classic case of one that looks very
  messy with the default greedy Myers diff - it's much more legible with
  either the patience of histogram diff algorithm ]

Link: https://lore.kernel.org/lkml/20211210053743.GA36420@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/20211213083154.GA20853@linux.intel.com/Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Carel Si <beibei.si@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.16-rc5.  They include:

   - gadget driver fixes for reported issues

   - xhci fixes for reported problems.

   - config endpoint parsing fixes for where we got bitfields wrong

  Most of these have been in linux-next, the remaining few were not, but
  got lots of local testing in my systems and in some cloud testing
  infrastructures"

* tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: core: config: using bit mask instead of individual bits
  usb: core: config: fix validation of wMaxPacketValue entries
  USB: gadget: zero allocate endpoint 0 buffers
  USB: gadget: detect too-big endpoint 0 requests
  xhci: avoid race between disable slot command and host runtime suspend
  xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
  Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"

Pull char/misc driver fixes from Greg KH:
 "Here are a bunch of small char/misc and other driver subsystem fixes.

  Included in here are:

   - iio driver fixes for reported problems

   - phy driver fixes for a number of reported problems

   - mhi resume bugfix for broken hardware

   - nvmem driver fix

   - rtsx driver fix for irq issues

   - fastrpc packet parsing fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
  bus: mhi: core: Add support for forced PM resume
  iio: trigger: stm32-timer: fix MODULE_ALIAS
  misc: rtsx: Avoid mangling IRQ during runtime PM
  nvmem: eeprom: at25: fix FRAM byte_len
  misc: fastrpc: fix improper packet size calculation
  MAINTAINERS: add maintainer for Qualcomm FastRPC driver
  bus: mhi: pci_generic: Fix device recovery failed issue
  iio: adc: stm32: fix null pointer on defer_probe error
  phy: HiSilicon: Fix copy and paste bug in error handling
  dt-bindings: phy: zynqmp-psgtr: fix USB phy name
  phy: ti: omap-usb2: Fix the kernel-doc style
  phy: qualcomm: ipq806x-usb: Fix kernel-doc style
  iio: at91-sama5d2: Fix incorrect sign extension
  iio: adc: axp20x_adc: fix charging current reporting on AXP22x
  iio: gyro: adxrs290: fix data signedness
  phy: ti: tusb1210: Fix the kernel-doc warn
  phy: qualcomm: usb-hsic: Fix the kernel-doc warn
  phy: qualcomm: qmp: Add missing struct documentation
  phy: mvebu-cp110-utmi: Fix kernel-doc warns
  iio: ad7768-1: Call iio_trigger_notify_done() on error
  ...

Pull timer fixes from Thomas Gleixner:
 "Two fixes for clock chip drivers:

   - A regression fix for the Designware APB timer. A recent change to
     the error checking code transformed the error condition wrongly so
     it turned into a fail if good condition.

   - Fix a clang build fail of the ARM architected timer driver"

* tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic()
  clocksource/drivers/dw_apb_timer_of: Fix probe failure

Pull irq fixes from Thomas Gleixner:
 "A set of interrupt chip driver fixes:

   - Fix the multi vector MSI allocation on Armada 370XP

   - Do interrupt acknowledgement correctly in the aspeed-scu driver

   - Make the IPR register offset correct in the NVIC driver

   - Make redistribution table flushing correct by issueing a SYNC
     command to ensure that the invalidation command has been executed

   - Plug a device tree node reference leak in the bcm7210-l2 driver

   - Trivial fixes in the MIPS GIC and the Apple AIC drivers"

* tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node()
  irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL
  irqchip/apple-aic: Mark aic_init_smp() as __init
  irqchip: nvic: Fix offset for Interrupt Priority Offsets
  irqchip/mips-gic: Use bitfield helpers
  irqchip/aspeed-scu: Replace update_bits with write_bits.
  irqchip/armada-370-xp: Fix support for Multi-MSI interrupts
  irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()

On s390, recordmcount.pl is looking for "bcrl 0,<xxx>" instructions in
the objdump -d outpout. However since binutils 2.37, objdump -d
display "jgnop <xxx>" for the same instruction. Update the
mcount_regex so that it accepts both.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211210093827.1623286-1-jmarchan@redhat.comSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

In the current code, when exiting from idle, rcu_irq_enter() is
called twice during irq entry:

irq_entry_enter()-> rcu_irq_enter()
irq_enter() -> rcu_irq_enter()

This may lead to wrong results from rcu_is_cpu_rrupt_from_idle()
because of a wrong dynticks nmi nesting count. Fix this by only
calling irq_enter_rcu().

Cc: <stable@vger.kernel.org> # 5.12+
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 56e62a73 ("s390: convert to generic entry")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull scheduler fix from Thomas Gleixner:
 "A single fix for the x86 scheduler topology:

  Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the
  scheduler towards the ATOM cluster as that has more total capacity.
  Use selection based on CPU priority instead"

* tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched,x86: Don't use cluster topology for x86 hybrid CPUs

Pull csky from Guo Ren:
 "Only one fix for csky: fix fpu config macro"

* tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux:
  csky: fix typo of fpu config macro

Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The checks performed by commit aed9d65a ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.

Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Under some conditions, USB gadget devices can show allocated buffer
contents to a host.  Fix this up by zero-allocating them so that any
extra data will all just be zeros.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes USB hosts can ask for buffers that are too large from endpoint
0, which should not be allowed.  If this happens for OUT requests, stall
the endpoint, but for IN requests, trim the request size to the endpoint
buffer size.
Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers.

  Three are small and obvious, the qedi one is a bit larger but also
  pretty obvious"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Format log strings only if needed
  scsi: scsi_debug: Fix buffer size of REPORT ZONES command
  scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue
  scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()

Pull xfs fix from Darrick Wong:
 "This fixes a race between a readonly remount process and other
  processes that hold a file IOLOCK on files that previously experienced
  copy on write, that could result in severe filesystem corruption if
  the filesystem is then remounted rw.

  I think this is fairly rare (since the only reliable reproducer I have
  that fits the second criteria is the experimental xfs_scrub program),
  but the race is clear, so we still need to fix this.

  Summary:

   - Fix a data corruption vector that can result from the ro remount
     process failing to clear all speculative preallocations from files
     and the rw remount process not noticing the incomplete cleanup"

* tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove all COW fork extents when remounting readonly

Pull percpu fixes from Dennis Zhou:
 "This contains a fix for SMP && !MMU archs for percpu which has been
  tested by arm and sh. It seems in the past they have gotten away with
  it due to mapping of vm functions to km functions, but this fell apart
  a few releases ago and was just reported recently.

  The other is just a minor dependency clean up.

  I think queued up right now by Andrew is a fix in percpu that papers
  of what seems to be a bug in hotplug for a special situation with
  memoryless nodes. Michal Hocko is digging into it further"

* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu_ref: Replace kernel.h with the necessary inclusions
  percpu: km: ensure it is used with NOMMU (either UP or SMP)

Merge tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Prevent out-of-bounds access to per sample registers.

 - Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.

 - Intel PT fixes, half of those are one-liners:
      - Fix some PGE (packet generation enable/control flow packets) usage.
      - Fix sync state when a PSB (synchronization) packet is found.
      - Fix intel_pt_fup_event() assumptions about setting state type.
      - Fix state setting when receiving overflow (OVF) packet.
      - Fix next 'err' value, walking trace.
      - Fix missing 'instruction' events with 'q' option.
      - Fix error timestamp setting on the decoder error path.

* tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf python: Fix NULL vs IS_ERR_OR_NULL() checking
  perf intel-pt: Fix error timestamp setting on the decoder error path
  perf intel-pt: Fix missing 'instruction' events with 'q' option
  perf intel-pt: Fix next 'err' value, walking trace
  perf intel-pt: Fix state setting when receiving overflow (OVF) packet
  perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type
  perf intel-pt: Fix sync state when a PSB (synchronization) packet is found
  perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage
  perf tools: Prevent out-of-bounds access to registers

Pull block fixes from Jens Axboe:
 "A few block fixes that should go into this release:

   - NVMe pull request:
        - set ana_log_size to 0 after freeing ana_log_buf (Hou Tao)
        - show subsys nqn for duplicate cntlids (Keith Busch)
        - disable namespace access for unsupported metadata (Keith
          Busch)
        - report write pointer for a full zone as zone start + zone len
          (Niklas Cassel)
        - fix use after free when disconnecting a reconnecting ctrl
          (Ruozhu Li)
        - fix a list corruption in nvmet-tcp (Sagi Grimberg)

   - Fix for a regression on DIO single bio async IO (Pavel)

   - ioprio seteuid fix (Davidlohr)

   - mtd fix that subsequently got reverted as it was broken, will get
     re-done and submitted for the next round

   - Two MD fixes via Song (Markus, zhangyue)"

* tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
  Revert "mtd_blkdevs: don't scan partitions for plain mtdblock"
  block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)
  md: fix double free of mddev->private in autorun_array()
  md: fix update super 1.0 on rdev size change
  nvmet-tcp: fix possible list corruption for unexpected command failure
  block: fix single bio async DIO error handling
  nvme: fix use after free when disconnecting a reconnecting ctrl
  nvme-multipath: set ana_log_size to 0 after free ana_log_buf
  mtd_blkdevs: don't scan partitions for plain mtdblock
  nvme: report write pointer for a full zone as zone start + zone len
  nvme: disable namespace access for unsupported metadata
  nvme: show subsys nqn for duplicate cntlids

Pull io_uring fixes from Jens Axboe:
 "A few fixes that are all bound for stable:

   - Two syzbot reports for io-wq that turned out to be separate fixes,
     but ultimately very closely related

   - io_uring task_work running on cancelations"

* tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
  io-wq: check for wq exit after adding new worker task_work
  io_uring: ensure task_work gets run as part of cancelations
  io-wq: remove spurious bit clear on task_work addition

Pull i2c fixes from Wolfram Sang:
 "Two more I2C driver bugfixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mpc: Use atomic read and fix break condition
  i2c: virtio: fix completion handling