- 24 Mar, 2009 15 commits
-
-
Joakim Tjernlund authored
Signed-off-by:David S. Miller <davem@davemloft.net>
-
Andrew H. Richter authored
This patch fixes two problems in the claw driver identified by static code analysis: o Change in case differentiation of received sense codes o Use correct data length in claw hard_start_xmit routine Signed-off-by:
Andrew H. Richter <richtera@us.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Joel A. Fowler authored
From: Ursula Braun <ursula.braun@de.ibm.com> This patch fixes problems in the ctcm driver identified by static code analysis: o remove an unnecessary always true condition in ctcm_unpack_skb o remove duplicate assignment in ctc_mpc_alloc_channel o remove an unnecessary always true condition in ctcmpc_send_sweep_resp o remove duplicate initialization in ctcmpc_unpack_skb o shorten if condition in mpc_action_go_inop o remove INOP event if mpc group is undefined in mpc_action_doxid7 Signed-off-by:
Joel A. Fowler <fowlerja@us.ibm.com> Signed-off-by:
-
Roel Kluin authored
Since the receive code should tolerate any incoming garbage, it should be protected against a potential wraparound when manipulating length values within incoming data. block_len is unsigned, so a too large subtraction will cause a wraparound. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Ursula Braun authored
Avoid kernel warning by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by:
-
Ursula Braun authored
Avoid kernel warnings by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by:
-
Ursula Braun authored
Avoid kernel warning by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by:
-
Klaus-Dieter Wacker authored
Lcs hard_start_xmit routine issued return codes other than defined for this interface. Now lcs returns only either NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by:
Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by:
-
Klaus-Dieter Wacker authored
Lcs uses low-level kernel_thread implementation. All drivers should use <linux/kthread.h> API instead. Signed-off-by:
-
Josh Stone authored
The tracing header needs to include definitions for the macros used and the types referenced. This lets automated tracing tools like SystemTap make use of the tracepoint without any specific knowledge of its meaning (leaving that to the user). Signed-off-by:
Josh Stone <jistone@redhat.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Eric Dumazet authored
Arches without efficient unaligned access can still perform a loop assuming 16bit alignment in ifname_compare() Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Jan Engelhardt authored
Supplements commit 67c0d579. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
-
Anton Vorontsov authored
This patch fixes following build error: CC ucc_geth.o ucc_geth.c: In function 'ucc_geth_probe': ucc_geth.c:3644: error: implicit declaration of function 'uec_mdio_bus_name' make[2]: *** [ucc_geth.o] Error 1 Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Eric Dumazet authored
We use RCU to defer freeing of conntrack structures. In DOS situation, RCU might accumulate about 10.000 elements per CPU in its internal queues. To get accurate conntrack counts (at the expense of slightly more RAM used), we might consider conntrack counter not taking into account "about to be freed elements, waiting in RCU queues". We thus decrement it in nf_conntrack_free(), not in the RCU callback. Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
- 23 Mar, 2009 18 commits
-
-
David S. Miller authored
I left a merge failure unresolved, noticed by Stephen Rothwell. Signed-off-by: -
Anton Vorontsov authored
Currently the driver just read "reg" property for constructing MDIO bus IDs, but this won't work when we'll start using "ranges = <>" in the device tree, so this will pop up: Freescale PowerQUICC MII Bus: probed sysfs: duplicate filename 'mdio@520' can not be created ------------[ cut here ]------------ Badness at c00cb6b8 [verbose debug info unavailable] NIP: c00cb6b8 LR: c00cb6b8 CTR: c001271c REGS: cf82fc10 TRAP: 0700 Not tainted (2.6.29-rc7-03702-g7ccd10f) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 42044022 XER: 20000000 TASK = cf81fbd0[1] 'swapper' THREAD: cf82e000 GPR00: c00cb6b8 cf82fcc0 cf81fbd0 0000003b 00000e42 ffffffff 00004000 00000e42 GPR08: c03cb0fc c03bfbdc 00000e42 c03cac50 22044022 1006a2bc 0ffcb000 00000000 GPR16: 0ffc04b0 0ffc5a40 00000000 0ffc79a8 0f7863a8 00000004 00000000 00000000 GPR24: c033a6a8 d1014520 cf85e840 cf82fd08 cf87cf2c cf82fcd8 cf85dea8 ffffffef NIP [c00cb6b8] sysfs_add_one+0x4c/0x54 LR [c00cb6b8] sysfs_add_one+0x4c/0x54 Call Trace: [cf82fcc0] [c00cb6b8] sysfs_add_one+0x4c/0x54 (unreliable) [cf82fcd0] [c00cbc18] create_dir+0x58/0xc0 [cf82fd00] [c00cbcc0] sysfs_create_dir+0x40/0x70 [cf82fd20] [c0159388] create_dir+0x28/0x78 [cf82fd30] [c0159824] kobject_add_internal+0x98/0x13c [cf82fd50] [c0159e98] kobject_add+0x60/0x98 [cf82fd80] [c018a480] device_add+0x98/0x2ac [cf82fda0] [c01a2380] mdiobus_register+0xbc/0x1c0 [cf82fdc0] [c019f31c] fsl_pq_mdio_probe+0x284/0x2a0 [cf82fe00] [c0223814] of_platform_device_probe+0x5c/0x84 ... This patch fixes the issue by translating the "reg" property to a full address, and thus avoids the duplicate names. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Noticed by Stephen Hemminger. Signed-off-by: -
David S. Miller authored
Conflicts: drivers/net/ucc_geth.c
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Signed-off-by: -
Pablo Neira Ayuso authored
This patch adds nfnetlink_set_err() to propagate the error to netlink broadcast listener in case of memory allocation errors in the message building. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Leblond authored
This patchs adds support of modification of the used logger via sysctl. It can be used to change the logger to module that can not use the bind operation (ipt_LOG and ipt_ULOG). For this purpose, it creates a directory /proc/sys/net/netfilter/nf_log which contains a file per-protocol. The content of the file is the name current logger (NONE if not set) and a logger can be setup by simply echoing its name to the file. By echoing "NONE" to a /proc/sys/net/netfilter/nf_log/PROTO file, the logger corresponding to this PROTO is set to NULL. Signed-off-by:
Eric Leblond <eric@inl.fr> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include in drivers/net/atl1c/atl1c.h. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
David S. Miller authored
Based upon a report by Stephen Rothwell. Signed-off-by: -
John Dykstra authored
Discard incoming packets whose ack field iincludes data not yet sent. This is consistent with RFC 793 Section 3.9. Change tcp_ack() to distinguish between too-small and too-large ack field values. Keep segments with too-large ack fields out of the fast path, and change slow path to discard them. Reported-by:
Oliver Zheng <mailinglists+netdev@oliverzheng.com> Signed-off-by:
John Dykstra <john.dykstra1@gmail.com> Signed-off-by:
-
Anton Vorontsov authored
commit b1c4a9dd ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by:
-
David Brownell authored
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Eilon Greenstein authored
Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 22 Mar, 2009 7 commits
-
-
Stephen Hemminger authored
Now that most network device drivers in (all but one in x86_64 allmodconfig) support net_device_ops. Expose it as a configuration parameter. Still need to address even older 32 bit drivers, and other arch before compatiablity can be scheduled for removal in some future release. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Use pre-existing net_device_stats in network_device struct. Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Signed-off-by:
-
Stephen Hemminger authored
Expose routines so drivers can hook. Only set ptrs in netdev if using old compat code. Signed-off-by:
-
Stephen Hemminger authored
Replace struct in ieee with current net_device_stats, so no longer need get_stats hook Signed-off-by:
-
