- 19 Jun, 2009 2 commits
-
-
Mike Frysinger authored
There's no reason that I can see to use the short __access_ok() form directly when the access_ok() is clearer in intent and for most people, expands to the same C code (i.e. always specify the first field -- access type). Not all no-mmu systems lack memory protection, so the read/write could feasibly be checked. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Mike Frysinger authored
The strnlen_user() function was missing a access_ok() check on the pointer given. We've had cases on Blackfin systems where test programs caused kernel crashes here because userspace passed up a NULL/-1 pointer and the kernel gladly attempted to run strlen() on it. Signed-off-by:
-
- 18 Jun, 2009 38 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: clean up jbd2_journal_try_to_free_buffers() ext4: Don't update ctime for non-extent-mapped inodes ext4: Fix up whitespace issues in fs/ext4/inode.c ext4: Fix 64-bit block type problem on 32-bit platforms ext4: teach the inode allocator to use a goal inode number ext4: Use a hash of the topdir directory name for the Orlov parent group ext4: document the "abort" mount option ext4: move the abort flag from s_mount_opts to s_mount_flags ext4: update the s_last_mounted field in the superblock ext4: change s_mount_opt to be an unsigned int ext4: online defrag -- Add EXT4_IOC_MOVE_EXT ioctl ext4: avoid unnecessary spinlock in critical POSIX ACL path ext3: avoid unnecessary spinlock in critical POSIX ACL path ext4: convert instrumentation from markers to tracepoints jbd2: convert instrumentation from markers to tracepoints
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (56 commits) sh: Fix declaration of __kernel_sigreturn and __kernel_rt_sigreturn sh: Enable soc-camera in ap325rxa/migor/se7724 defconfigs. sh: remove stray markers. sh: defconfig updates. sh: pci: Initial PCI-Express support for SH7786 Urquell board. sh: Generic HAVE_PERF_COUNTER support. SH: convert migor to soc-camera as platform-device SH: convert ap325rxa to soc-camera as platform-device soc-camera: unify i2c camera device platform data sh: add platform data for r8a66597-hcd in setup-sh7723 sh: add platform data for r8a66597-hcd in setup-sh7366 sh: x3proto: add platform data for r8a66597-hcd sh: highlander: add platform data for r8a66597-hcd sh: sh7785lcr: add platform data for r8a66597-hcd sh: turn off irqs when disabling CMT/TMU timers sh: use kzalloc() for cpg clocks sh: unbreak WARN_ON() sh: Use generic atomic64_t implementation. sh: Revised clock function in highlander sh: Update r7780mp defconfig ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits) netxen: fix tx ring accounting netxen: fix detection of cut-thru firmware mode forcedeth: fix dma api mismatches atm: sk_wmem_alloc initial value is one net: correct off-by-one write allocations reports via-velocity : fix no link detection on boot Net / e100: Fix suspend of devices that cannot be power managed TI DaVinci EMAC : Fix rmmod error net: group address list and its count ipv4: Fix fib_trie rebalancing, part 2 pkt_sched: Update drops stats in act_police sky2: version 1.23 sky2: add GRO support sky2: skb recycling sky2: reduce default transmit ring sky2: receive counter update sky2: fix shutdown synchronization sky2: PCI irq issues sky2: more receive shutdown sky2: turn off pause during shutdown ... Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] hpwdt: Add NMI sourcing [WATCHDOG] iTCO_wdt: Fix ICH7+ reboot issue. [WATCHDOG] iTCO_wdt: fix memory corruption when RCBA is disabled by hardware [WATCHDOG] Correct WDIOF_MAGICCLOSE flag [WATCHDOG] move platform probe and remove function to devinit and devexit [WATCHDOG] Some more general cleanup [WATCHDOG] iTCO_wdt: Cleanup code
-
Benjamin Herrenschmidt authored
The page allocator also needs the masking of gfp flags during boot, so this moves it out of slab/slub and uses it with the page allocator as well. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: (39 commits) md/raid5: correctly update sync_completed when we reach max_resync md/raid5: add missing call to schedule() after prepare_to_wait() md/linear: use call_rcu to free obsolete 'conf' structures. md linear: Protecting mddev with rcu locks to avoid races md: Move check for bitmap presence to personality code. md: remove chunksize rounding from common code. md: raid0/linear: ensure device sizes are rounded to chunk size. md: move assignment of ->utime so that it never gets skipped. md: Push down reconstruction log message to personality code. md: merge reconfig and check_reshape methods. md: remove unnecessary arguments from ->reconfig method. md: raid5: check stripe cache is large enough in start_reshape md: raid0: chunk_sectors cleanups. md: fix some comments. md/raid5: Use is_power_of_2() in raid5_reconfig()/raid6_reconfig(). md: convert conf->chunk_size and conf->prev_chunk to sectors. md: Convert mddev->new_chunk to sectors. md: Make mddev->chunk_size sector-based. md: raid0 :Enables chunk size other than powers of 2. md: prepare for non-power-of-two chunk sizes ...
-
Mark Salter authored
Add support for new relocs which may show up in MN10300 kernel modules due to linker relaxation. Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Florian Fainelli authored
This patch adds lib/gcd.c which contains a greatest common divider implementation taken from sound/core/pcm_timer.c Several usages of this new library function will be sent to subsystem maintainers. [akpm@linux-foundation.org: use swap() (pointed out by Joe)] [akpm@linux-foundation.org: just add gcd.o to obj-y, remove Kconfig changes] Signed-off-by:
Florian Fainelli <florian@openwrt.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Simon Horman <horms@verge.net.au> Cc: Julius Volz <juliusv@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Rodolfo Giometti authored
This patch adds the kernel side of the PPS support currently named "LinuxPPS". PPS means "pulse per second" and a PPS source is just a device which provides a high precision signal each second so that an application can use it to adjust system clock time. Common use is the combination of the NTPD as userland program with a GPS receiver as PPS source to obtain a wallclock-time with sub-millisecond synchronisation to UTC. To obtain this goal the userland programs shoud use the PPS API specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating Systems, Version 1.0) which in part is implemented by this patch. It provides a set of chars devices, one per PPS source, which can be used to get the time signal. The RFC's functions can be implemented by accessing to these char devices. Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Jack Steiner authored
Fix the copyright statements in a couple of GRU files. No functional changes are being made. Signed-off-by:
Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Jack Steiner authored
Delete references to the SGI GRU GSH hardware resources. These GRU resources have been deleted from the hardware. (These resources have never benn used, anyway). Signed-off-by:
-
Jack Steiner authored
Minor fixes to the SGI GRU grudump facility: - fix address where user data is written - add gru number to data passed to user - indicate if context is locked Signed-off-by:
-
Jack Steiner authored
Fix potential SGI GRU bug that could cause a use-after-free. If one thread in a task is flushing the GRU and another thread destroys the GRU context, there is the potential to access a table after it has been freed. Copy the gms pointer to a local variable before unlocking the gts table. Note that no refcnt is needed for the gms - the reference is held indirectly by the task's mm_struct. Signed-off-by:
-
Jack Steiner authored
Add a user request to specify the gru instruction slice parameter for user contexts. Signed-off-by:
-
Jack Steiner authored
Change the user GRU request for specifying the "task_slice" option to use a generic infrastructure that can be expanded in the future to include additional context options. No new capabilities are added with this patch. Signed-off-by:
-
Jack Steiner authored
Cleanup of GRU inline functions to eliminate unnecessary inline code. Update function descriptions. Signed-off-by:
-
Jack Steiner authored
Delete the user request for fetching the status of a GRU chiplet. This request has been made obsolete by other changes. Note: this is not a change to a user API - there are no compatibility issues with this change. Signed-off-by:
-
Jack Steiner authored
Collect GRU statistics for each user GRU context. Statistics are kept for TLB misses & content resource contention. Add user request for retrieving the statistics. Signed-off-by:
-
Jack Steiner authored
Fix bug in automatic retry of GRU instruction failures. CBR substatus (message queue failure) was being checked incorrectly. Signed-off-by:
-
Jack Steiner authored
Add user function to explicitly unload GRU kernel contexts from the GRU. Only contexts that are not in-use will be unloaded. This function is primarily for testing. It is not expected that this will be used in normal production systems. Signed-off-by:
-
Jack Steiner authored
Fix two problems related to GRU instruction failures. Cache coherency is not maintained for CBEs except when loading or unloading contexts. When reading a CBE to extract error information, the CBE must first be flushed from the cache. The function that reads kerrnel CBEs was reading the wrong CBE. Signed-off-by:
-
Jack Steiner authored
Update GRU driver to the latest version of the GRU spec. This consists of minor updates: - changes & additions to error status bits - new restriction on handling of TLB misses while in FMM mode - new field (not used by software) in TFH Signed-off-by:
-
Jack Steiner authored
Change the kernel self tests that can be optionally executed on GRU initialization. This is primarily for testing. Eliminate the BUG statements on failure and return bad status. Add ioctl interface to execute the tests on demand. Signed-off-by:
-
Jack Steiner authored
Add support for asynchronous GRU instructions. Currently, asynchronous instructions are supported only for GRU instructions issued by the kernel. [akpm@linux-foundation.org: build fix] Signed-off-by:
-
Jack Steiner authored
Add support for interrupts generated by GRU instruction completion. Previously, the only interrupts were for TLB misses. The hardware also supports interrupts on instruction completion. This will be supported for instructions issued by the kernel. Signed-off-by:
-
Jack Steiner authored
Check whether the gru state being loaded into a gru is from a new context or a previously unloaded context. If new, simply zero out the hardware context; if unloaded and valid, reload the old state. This change is primarily for reloading kernel contexts where the previous is not required to be saved. Signed-off-by:
-
Jack Steiner authored
Fix endcase in handling GRU message queue failures due to NACKs of PUT requests. Must ensure that the "present" bits are cleared before resending the message. Signed-off-by:
-
Jack Steiner authored
Support alocation of GRU contexts that contain zero DSR or CBR resources. Some instructions do not require DSR resources. Contexts without CBR resources are useful for diagnostics. Signed-off-by:
-
Jack Steiner authored
Change the way GRU resources are assigned for kernel threads. GRU contexts for kernel threads are now allocated on demand and can be stolen by user processes when idle. This allows MPI jobs to use ALL of the GRU resources when the kernel is not using them. Signed-off-by:
-
Jack Steiner authored
Change the interface to cch_allocate so that it can be used to allocate GRU contexts for kernel threads. Kernel threads use the GRU in unmapped mode and do not require ASIDs for the GRU TLB. Signed-off-by:
-
Jack Steiner authored
Remove "static" from the functions for loading/unloading GRU contexts. These functions will be called from other GRU files. Fix bug in unlocking gru context. Signed-off-by:
-
Jack Steiner authored
Change the interface to gru_alloc_gts() so that it can be used to allocate GRU contexts for kernel threads. Kernel threads do not have vdata structures for the GRU contexts. The GRU resource count are now passed explicitly instead of inside the vdata structure. Signed-off-by:
-
Jack Steiner authored
Add support for dumpping the state of an entire GRU chiplet. Signed-off-by:
-
Jack Steiner authored
Bug fixes for GRU exception handling. Additional fields from the CBR must be returned to the user to allow the user to correctly diagnose GRU exceptions. Handle endcase in TFH TLB miss handling. Verify that TFH actually indicates a pending exception. Signed-off-by:
-
Neil Horman authored
Currently the sysrq-c handler is bit over-engineered. Its behavior is dependent on a few compile time and run time factors that alter its behavior which is really unnecessecary. If CONFIG_KEXEC is not configured, sysrq-c, crashes the system with a NULL pointer dereference. If CONFIG_KEXEC is configured, it calls crash_kexec directly, which implies that the kexec kernel will either be booted (if its been previously loaded), or it will simply do nothing (the no kexec kernel has been loaded). It would be much easier to just simplify the whole thing to dereference a NULL pointer all the time regardless of configuration. That way, it will always try to crash the system, and if a kexec kernel has been loaded into reserved space, it will still boot from the page fault trap handler (assuming panic_on_oops is set appropriately). [akpm@linux-foundation.org: build fix] Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Cc: Brayan Arraes <brayan@yack.com.br> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Daniel Mack authored
On embedded devices, sleep mode conditions can be tricky to handle, Especially when processors tend to pull-down the w1 bus during sleep. Bus slaves (such as the ds2760) may interpret this as a reason for power-down conditions and entirely switch off the device. This patch adds a callback function pointer to let users switch on and off the external pull-up resistor. This lets the outside world know whether the processor is currently actively driving the bus or not. When this callback is not provided, the code behaviour won't change. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Acked-by:
Ville Syrjala <syrjala@sci.fi> Acked-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by:
"Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
