- 29 Mar, 2022 16 commits
-
-
John David Anglin authored
This change fixes the following: 1) The flags variable is not initialized. Always use raw_spin_lock_irqsave and raw_spin_unlock_irqrestore to serialize patching. 2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since __patch_text_multiple is often called with interrupts disabled, it is better to directly call flush_kernel_dcache_range_asm and flush_kernel_icache_range_asm. This avoids an extra call. 3) The final call to flush_icache_range is unnecessary. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de>
-
Helge Deller authored
When CPU hotplugging is enabled, the user may want to remove the current CPU which is providing the timer ticks. If this happens we need to find a new timesync master. Signed-off-by: -
Helge Deller authored
Move the common_stext function into the non-init text section if hotplug is enabled. This function is called from the firmware when hotplugged CPUs are brought up. Signed-off-by: -
Helge Deller authored
Let the PDC firmware put the CPU into firmware idle loop with the pdc_cpu_rendezvous() function. Signed-off-by: -
Helge Deller authored
Add relevant code to __cpu_die() and __cpu_disable() to finally enable the CPU hotplugging features. Reset the irq count values in smp_callin() to zero before bringing up the CPU. It seems that the firmware may need up to 8 seconds to fully stop a CPU in which no other PDC calls are allowed to be made. Use a timeout __cpu_die() to accommodate for this. Use "chcpu -d 1" to bring CPU1 down, and "chcpu -e 1" to bring it up. Signed-off-by: -
Helge Deller authored
Add pdc_cpu_rendezvous_lock() and pdc_cpu_rendezvous_unlock() to lock PDC while CPU is transitioning into rendezvous state. This is needed, because the transition phase may take up to 8 seconds. Add pdc_pat_get_PDC_entrypoint() to get PDC entry point for current CPU. Signed-off-by: -
Helge Deller authored
Signed-off-by: -
Helge Deller authored
If CONFIG_HOTPLUG_CPU is enabled, those functions will be run again after bootup. So they need to reside in the .text section. Signed-off-by: -
Helge Deller authored
Signed-off-by: -
Helge Deller authored
Switch away from the own cpu topology code to common code which is used by ARM64 and RISCV. That will allow us to enable CPU hotplug later on. Signed-off-by: -
Helge Deller authored
Call set_firmware_width() only once at runtime. This prevents that hotplugged CPUs will get stuck in spinlocks later on. Signed-off-by: -
Helge Deller authored
Clean up the code for the mfctl() and mtctl() functions and add often used constants. Signed-off-by: -
Helge Deller authored
Allow the system to find the SUSE hppa compiler and linker to set CROSS32_COMPILE and CROSS_COMPILE. Suggested-by:
Jiri Slaby <jirislaby@kernel.org> Signed-off-by:
-
Helge Deller authored
The cpu_set_affinity_irq() isn't needed. Not the CPU irqs need to change, but the slave irq chips simply need to be reprogrammed to a new CPU irq with the txn_* functions. Signed-off-by: -
Helge Deller authored
Add the missing logic to allow Lasi, WAX and Dino to set the CPU affinity. This fixes IRQ migration to other CPUs when a CPU is shutdown which currently holds the IRQs for one of those chips. Signed-off-by: -
Helge Deller authored
This reverts commit 53d862fa. It turned out that flush_kernel_vmap_range() is being called with interrupts disabled. There's no way to flush entire cache with interrupts disabled. Signed-off-by:
-
- 28 Mar, 2022 1 commit
-
-
Muchun Song authored
The objcg is not cleared and put for kfence object when it is freed, which could lead to memory leak for struct obj_cgroup and wrong statistics of NR_SLAB_RECLAIMABLE_B or NR_SLAB_UNRECLAIMABLE_B. Since the last freed object's objcg is not cleared, mem_cgroup_from_obj() could return the wrong memcg when this kfence object, which is not charged to any objcgs, is reallocated to other users. A real word issue [1] is caused by this bug. Link: https://lore.kernel.org/all/000000000000cabcb505dae9e577@google.com/ [1] Reported-by: syzbot+f8c45ccc7d5d45fc5965@syzkaller.appspotmail.com Fixes: d3fb45f3 ("mm, kfence: insert KFENCE hooks for SLAB") Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 27 Mar, 2022 8 commits
-
-
Stephen Rothwell authored
Fixes: 70010521 ("Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Brown-paper-bag-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linuxLinus Torvalds authored
Pull landlock updates from Mickaël Salaün: "These two commits contain a minor fix for the sandboxer sample, and a Landlock ruleset FD name standardization" * tag 'landlock-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Use square brackets around "landlock-ruleset" samples/landlock: Fix path_list memory leak
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: "qcom: - add support for MSM8976 mtk: - enable mt8186 - add ADSP controller driver ti: - use poll mode during suspend tegra: - fix tx channel flush imx: - add i.MX8 SECO MU support - prepare for, and add iMX93 support" * tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: add definition for mt8186 mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend mailbox: ti-msgmgr: Refactor message read during interrupt handler mailbox: imx: support i.MX93 S401 MU mailbox: imx: support dual interrupts mailbox: imx: extend irq to an array dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support dt-bindings: mailbox: imx-mu: add i.MX93 MU mailbox: imx: add i.MX8 SECO MU support mailbox: imx: introduce rxdb callback dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support mailbox: imx: enlarge timeout while reading/writing messages to SCFW mailbox: imx: fix crash in resume on i.mx8ulp mailbox: imx: fix wakeup failure from freeze mode mailbox: mediatek: add support for adsp mailbox controller dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC dt-bindings: mailbox: Add compatible for the MSM8976 mailbox: tegra-hsp: Flush whole channel
-
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-ledsLinus Torvalds authored
Pull LED updates from Pavel Machek: "Nothing major here, there are two drivers that need review and did not make it into this round" * tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca955x: Allow zero LEDs to be specified leds: pca955x: Make the gpiochip always expose all pins leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static leds: lm3692x: Return 0 from remove callback leds: sgm3140: Add ocs,ocp8110 compatible dt-bindings: vendor-prefixes: Add ocs prefix dt-bindings: leds: common: fix unit address in max77693 example
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools updates from Arnaldo Carvalho de Melo: "New features: perf ftrace: - Add -n/--use-nsec option to the 'latency' subcommand. Default: usecs: $ sudo perf ftrace latency -T dput -a sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 2098375 | ############################# | 1 - 2 us | 61 | | 2 - 4 us | 33 | | 4 - 8 us | 13 | | 8 - 16 us | 124 | | 16 - 32 us | 123 | | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 1 | | 256 - 512 us | 0 | | Better granularity with nsec: $ sudo perf ftrace latency -T dput -a -n sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 ns | 0 | | 2 - 4 ns | 0 | | 4 - 8 ns | 0 | | 8 - 16 ns | 0 | | 16 - 32 ns | 0 | | 32 - 64 ns | 0 | | 64 - 128 ns | 1163434 | ############## | 128 - 256 ns | 914102 | ############# | 256 - 512 ns | 884 | | 512 - 1024 ns | 613 | | 1 - 2 us | 31 | | 2 - 4 us | 17 | | 4 - 8 us | 7 | | 8 - 16 us | 123 | | 16 - 32 us | 83 | | perf lock: - Add -c/--combine-locks option to merge lock instances in the same class into a single entry. # perf lock report -c Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns) rcu_read_lock 251225 0 0 0 0 0 hrtimer_bases.lock 39450 0 0 0 0 0 &sb->s_type->i_l... 10301 1 662 662 662 662 ptlock_ptr(page) 10173 2 701 1402 760 642 &(ei->i_block_re... 8732 0 0 0 0 0 &xa->xa_lock 8088 0 0 0 0 0 &base->lock 6705 0 0 0 0 0 &p->pi_lock 5549 0 0 0 0 0 &dentry->d_lockr... 5010 4 1274 5097 1844 789 &ep->lock 3958 0 0 0 0 0 - Add -F/--field option to customize the list of fields to output: $ perf lock report -F contended,wait_max -k avg_wait Name contended max wait(ns) avg wait(ns) slock-AF_INET6 1 23543 23543 &lruvec->lru_lock 5 18317 11254 slock-AF_INET6 1 10379 10379 rcu_node_1 1 2104 2104 &dentry->d_lockr... 1 1844 1844 &dentry->d_lockr... 1 1672 1672 &newf->file_lock 15 2279 1025 &dentry->d_lockr... 1 792 792 - Add --synth=no option for record, as there is no need to symbolize, lock names comes from the tracepoints. perf record: - Threaded recording, opt-in, via the new --threads command line option. - Improve AMD IBS (Instruction-Based Sampling) error handling messages. perf script: - Add 'brstackinsnlen' field (use it with -F) for branch stacks. - Output branch sample type in 'perf script'. perf report: - Add "addr_from" and "addr_to" sort dimensions. - Print branch stack entry type in 'perf report --dump-raw-trace' - Fix symbolization for chrooted workloads. Hardware tracing: Intel PT: - Add CFE (Control Flow Event) and EVD (Event Data) packets support. - Add MODE.Exec IFLAG bit support. Explanation about these features from the "Intel
® 64 and IA-32 architectures software developer’s manual combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at: https://cdrdv2.intel.com/v1/dl/getContent/671200 At page 3951: "32.2.4 Event Trace is a capability that exposes details about the asynchronous events, when they are generated, and when their corresponding software event handler completes execution. These include: o Interrupts, including NMI and SMI, including the interrupt vector when defined. o Faults, exceptions including the fault vector. - Page faults additionally include the page fault address, when in context. o Event handler returns, including IRET and RSM. o VM exits and VM entries.¹ - VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields. INIT and SIPI events. o TSX aborts, including the abort status returned for the RTM instructions. o Shutdown. Additionally, it provides indication of the status of the Interrupt Flag (IF), to indicate when interrupts are masked" ARM CoreSight: - Use advertised caps/min_interval as default sample_period on ARM spe. - Update deduction of TRCCONFIGR register for branch broadcast on ARM's CoreSight ETM. Vendor Events (JSON): Intel: - Update events and metrics for: Alderlake, Broadwell, Broadwell DE, BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont, GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX, Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP, Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX, Tigerlake, TremontX, Westmere EP-SP, and Westmere EX. ARM: - Add support for HiSilicon CPA PMU aliasing. perf stat: - Fix forked applications enablement of counters. - The 'slots' should only be printed on a different order than the one specified on the command line when 'topdown' events are present, fix it. Miscellaneous: - Sync msr-index, cpufeatures header files with the kernel sources. - Stop using some deprecated libbpf APIs in 'perf trace'. - Fix some spelling mistakes. - Refactor the maps pointers usage to pave the way for using refcount debugging. - Only offer the --tui option on perf top, report and annotate when perf was built with libslang. - Don't mention --to-ctf in 'perf data --help' when not linking with the required library, libbabeltrace. - Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by array_size.cocci. - Enhance the matching of sub-commands abbreviations: 'perf c2c rec' -> 'perf c2c record' 'perf c2c recport -> error - Set build-id using build-id header on new mmap records. - Fix generation of 'perf --version' string. perf test: - Add test for the arm_spe event. - Add test to check unwinding using fame-pointer (fp) mode on arm64. - Make metric testing more robust in 'perf test'. - Add error message for unsupported branch stack cases. libperf: - Add API for allocating new thread map array. - Fix typo in perf_evlist__open() failure error messages in libperf tests. perf c2c: - Replace bitmap_weight() with bitmap_empty() where appropriate" * tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits) perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages perf python: Add perf_env stubs that will be needed in evsel__open_strerror() perf tools: Enhance the matching of sub-commands abbreviations libperf tests: Fix typo in perf_evlist__open() failure error messages tools arm64: Import cputype.h perf lock: Add -F/--field option to control output perf lock: Extend struct lock_key to have print function perf lock: Add --synth=no option for record tools headers cpufeatures: Sync with the kernel sources tools headers cpufeatures: Sync with the kernel sources perf stat: Fix forked applications enablement of counters tools arch x86: Sync the msr-index.h copy with the kernel sources perf evsel: Make evsel__env() always return a valid env perf build-id: Fix spelling mistake "Cant" -> "Can't" perf header: Fix spelling mistake "could't" -> "couldn't" perf script: Add 'brstackinsnlen' for branch stacks perf parse-events: Move slots only with topdown perf ftrace latency: Update documentation perf ftrace latency: Add -n/--use-nsec option perf tools: Fix version kernel tag ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull memblock updates from Mike Rapoport: "Test suite and a small cleanup: - A small cleanup of unused variable in __next_mem_pfn_range_in_zone - Initial test suite to simulate memblock behaviour in userspace" * tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits) memblock tests: Add TODO and README files memblock tests: Add memblock_alloc_try_nid tests for bottom up memblock tests: Add memblock_alloc_try_nid tests for top down memblock tests: Add memblock_alloc_from tests for bottom up memblock tests: Add memblock_alloc_from tests for top down memblock tests: Add memblock_alloc tests for bottom up memblock tests: Add memblock_alloc tests for top down memblock tests: Add simulation of physical memory memblock tests: Split up reset_memblock function memblock tests: Fix testing with 32-bit physical addresses memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid memblock tests: Add memblock_free tests memblock tests: Add memblock_add_node test memblock tests: Add memblock_remove tests memblock tests: Add memblock_reserve tests memblock tests: Add memblock_add tests memblock tests: Add memblock reset function memblock tests: Add skeleton of the memblock simulator tools/include: Add debugfs.h stub tools/include: Add pfn.h stub ...
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "Not much for OpenRISC this merge window, I do have some things on the back burner like sparse warning cleanups and new defconfigs. But I didn't get time to polish the patches off for this round. There are OpenRISC updates coming in via other queues like removal of set_fs() and possibly new generic ticket locks. This just has a small fixup to remove duplicate initializer in memcpy from Kuniyuki Iwashima" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc/boot: Remove unnecessary initialisation in memcpy().
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
-
- 26 Mar, 2022 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull trace event string verifier fix from Steven Rostedt: "The run-time string verifier checks all trace event formats as they are read from the tracing file to make sure that the %s pointers are not reading something that no longer exists. However, it failed to account for the valid case of '%*.s' where the length given is zero, and the string is NULL. It incorrectly flagged it as a null pointer dereference and gave a WARN_ON()" * tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have trace event string test handle zero length strings
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ... -
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: - tracepoints when Linux acts as an I2C client - added support for AMD PSP - whole subsystem now uses generic_handle_irq_safe() - piix4 driver gained MMIO access enabling so far missed controllers with AMD chipsets - a bulk of device driver updates, refactorization, and fixes. * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits) i2c: mux: demux-pinctrl: do not deactivate a master that is not active i2c: meson: Fix wrong speed use from probe i2c: add tracepoints for I2C slave events i2c: designware: Remove code duplication i2c: cros-ec-tunnel: Fix syntax errors in comments MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused i2c: mediatek: Add i2c compatible for Mediatek MT8168 dt-bindings: i2c: update bindings for MT8168 SoC i2c: mt65xx: Simplify with clk-bulk i2c: i801: Drop two outdated comments i2c: xiic: Make bus names unique i2c: i801: Add support for the Process Call command i2c: i801: Drop useless masking in i801_access i2c: tegra: Add SMBus block read function i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers i2c: designware: Lock the adapter while setting the suspended flag i2c: mediatek: remove redundant null check i2c: mediatek: modify bus speed calculation formula i2c: designware: Fix improper usage of readl ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull iomap fixlet from Andreas Gruenbacher: "Fix buffered write page prefaulting. I forgot to send it the previous merge window. I've only improved the patch description since" * tag 'write-page-prefaulting' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: fs/iomap: Fix buffered write page prefaulting
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull array-bounds updates from Kees Cook: "This enables -Warray-bounds and -Wzero-length-bounds, now that the many bug fixes have landed all over the place in the kernel, and in GCC itself[1]. A couple fixes[2] for known corner-case issues currently live in my "pending-fixes" tree which I'm expecting to send next week if other maintainers still haven't picked them up. I'm also expecting we can enable -Wstringop-overflow next cycle, as there are only a few stragglers[3], but it might even be possible for this release" [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578 [2] https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/commit/?h=for-next/pending-fixes&id=2d253138910eec553fc706379914243d71de9b85 [3] https://github.com/KSPP/linux/issues/181 * tag 'array-bounds-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Makefile: Enable -Wzero-length-bounds Makefile: Enable -Warray-bounds
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull FORTIFY_SOURCE updates from Kees Cook: "This series consists of two halves: - strict compile-time buffer size checking under FORTIFY_SOURCE for the memcpy()-family of functions (for extensive details and rationale, see the first commit) - enabling FORTIFY_SOURCE for Clang, which has had many overlapping bugs that we've finally worked past" * tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: fortify: Add Clang support fortify: Make sure strlen() may still be used as a constant expression fortify: Use __diagnose_as() for better diagnostic coverage fortify: Make pointer arguments const Compiler Attributes: Add __diagnose_as for Clang Compiler Attributes: Add __overloadable for Clang Compiler Attributes: Add __pass_object_size for Clang fortify: Replace open-coded __gnu_inline attribute fortify: Update compile-time tests for Clang 14 fortify: Detect struct member overflows in memset() at compile-time fortify: Detect struct member overflows in memmove() at compile-time fortify: Detect struct member overflows in memcpy() at compile-time -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer 64-bit data integrity support from Jens Axboe: "This adds support for 64-bit data integrity in the block layer and in NVMe" * tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block: crypto: fix crc64 testmgr digest byte order nvme: add support for enhanced metadata block: add pi for extended integrity crypto: add rocksoft 64b crc guard tag framework lib: add rocksoft model crc64 linux/kernel: introduce lower_48_bits function asm-generic: introduce be48 unaligned accessors nvme: allow integrity on extended metadata formats block: support pi with extended metadata
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull bio allocation fix from Jens Axboe: "We got some reports of users seeing: Unexpected gfp: 0x2 (__GFP_HIGHMEM). Fixing up to gfp: 0x1192888 which is a regression caused by the bio allocation cleanups" * tag 'for-5.18/alloc-cleanups-2022-03-25' of git://git.kernel.dk/linux-block: fs: do not pass __GFP_HIGHMEM to bio_alloc in do_mpage_readpage
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull NVMe write streams removal from Jens Axboe: "This removes the write streams support in NVMe. No vendor ever really shipped working support for this, and they are not interested in supporting it. With the NVMe support gone, we have nothing in the tree that supports this. Remove passing around of the hints. The only discussion point in this patchset imho is the fact that the file specific write hint setting/getting fcntl helpers will now return -1/EINVAL like they did before we supported write hints. No known applications use these functions, I only know of one prototype that I help do for RocksDB, and that's not used. That said, with a change like this, it's always a bit controversial. Alternatively, we could just make them return 0 and pretend it worked. It's placement based hints after all" * tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block: fs: remove fs.f_write_hint fs: remove kiocb.ki_hint block: remove the per-bio/request write hint nvme: remove support or stream based temperature hint
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: - Add Krzysztof Kozlowski as co-maintainer for DT bindings providing much needed help. - DT schema validation now takes DTB files as input rather than intermediate YAML files. This decouples the validation from the source level syntax information. There's a bunch of schema fixes as a result of switching to DTB based validation which exposed some errors and incomplete schemas and examples. - Kbuild improvements to explicitly warn users running 'make dt_binding_check' on missing yamllint - Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename or path instead of the full path to 1 file. - Convert various bindings to schema format: mscc,vsc7514-switch, multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma, msm/mdp4, rda,8810pl-uart - New schemas for u-boot environment variable partition, TI clksel - New compatible strings for Renesas RZ/V2L SoC - Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon - Add/fix schemas for QEMU Arm 'virt' machine - Drop unused of_alias_get_alias_list() function - Add a script to check DT unittest EXPECT message output. Pass messages also now print by default at PR_INFO level to help test automation. * tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits) dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable dt-bindings: nvmem: add U-Boot environment variables binding dt-bindings: ufs: qcom: Add SM6350 compatible string dt-bindings: dmaengine: sifive,fu540-c000: include generic schema dt-bindings: gpio: pca95xx: drop useless consumer example Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs" dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent' dt-bindings: gnss: Add two more chips dt-bindings: gnss: Rewrite sirfstar binding in YAML dt-bindings: gnss: Modify u-blox to use common bindings dt-bindings: gnss: Rewrite common bindings in YAML dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible dt-bindings: ata: ahci-platform: Add power-domains property dt-bindings: ata: ahci-platform: Convert DT bindings to yaml dt-bindings: kbuild: Use DTB files for validation dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate dt-bindings: Add QEMU virt machine compatible dt-bindings: arm: Convert QEMU fw-cfg to DT schema dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list dt-bindings: i2c: convert i2c-at91 to json-schema ...
-
Linus Torvalds authored
This reverts commit aa6f8dcb. It turns out this breaks at least the ath9k wireless driver, and possibly others. What the ath9k driver does on packet receive is to set up the DMA transfer with: int ath_rx_init(..) .. bf->bf_buf_addr = dma_map_single(sc->dev, skb->data, common->rx_bufsize, DMA_FROM_DEVICE); and then the receive logic (through ath_rx_tasklet()) will fetch incoming packets static bool ath_edma_get_buffers(..) .. dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); ret = ath9k_hw_process_rxdesc_edma(ah, rs, skb->data); if (ret == -EINPROGRESS) { /*let device gain the buffer again*/ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr, common->rx_bufsize, DMA_FROM_DEVICE); return false; } and it's worth noting how that first DMA sync: dma_sync_single_for_cpu(..DMA_FROM_DEVICE); is there to make sure the CPU can read the DMA buffer (possibly by copying it from the bounce buffer area, or by doing some cache flush). The iommu correctly turns that into a "copy from bounce bufer" so that the driver can look at the state of the packets. In the meantime, the device may continue to write to the DMA buffer, but we at least have a snapshot of the state due to that first DMA sync. But that _second_ DMA sync: dma_sync_single_for_device(..DMA_FROM_DEVICE); is telling the DMA mapping that the CPU wasn't interested in the area because the packet wasn't there. In the case of a DMA bounce buffer, that is a no-op. Note how it's not a sync for the CPU (the "for_device()" part), and it's not a sync for data written by the CPU (the "DMA_FROM_DEVICE" part). Or rather, it _should_ be a no-op. That's what commit aa6f8dcb broke: it made the code bounce the buffer unconditionally, and changed the DMA_FROM_DEVICE to just unconditionally and illogically be DMA_TO_DEVICE. [ Side note: purely within the confines of the swiotlb driver it wasn't entirely illogical: The reason it did that odd DMA_FROM_DEVICE -> DMA_TO_DEVICE conversion thing is because inside the swiotlb driver, it uses just a swiotlb_bounce() helper that doesn't care about the whole distinction of who the sync is for - only which direction to bounce. So it took the "sync for device" to mean that the CPU must have been the one writing, and thought it meant DMA_TO_DEVICE. ] Also note how the commentary in that commit was wrong, probably due to that whole confusion, claiming that the commit makes the swiotlb code "bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer" which is nonsensical for two reasons: - that "also when dir == DMA_TO_DEVICE" is nonsensical, as that was exactly when it always did - and should do - the bounce. - since this is a sync for the device (not for the CPU), we're clearly fundamentally not coping back stale data from the bounce buffers at all, because we'd be copying *to* the bounce buffers. So that commit was just very confused. It confused the direction of the synchronization (to the device, not the cpu) with the direction of the DMA (from the device). Reported-and-bisected-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by:
Olha Cherevyk <olha.cherevyk@gmail.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Kalle Valo <kvalo@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Toke Høiland-Jørgensen <toke@toke.dk> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Kim Phillips authored
Improve the error message returned on failed perf_event_open() on AMD systems when using IBS (Instruction-Based Sampling). Output of executing 'perf record -e ibs_op// true' as a non root user BEFORE this patch (perf will add the 'u' modifier at the end to exclude kernel/hypervisor sampling): The sys_perf_event_open() syscall returned with 22 (Invalid argument)for event (ibs_op//u). /bin/dmesg | grep -i perf may provide additional information. Output after: AMD IBS can't exclude kernel events. Try running at a higher privilege level. Output of executing 'sudo perf record -e ibs_op// true' BEFORE this patch: Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (ibs_op//). /bin/dmesg | grep -i perf may provide additional information. Output after: Error: Invalid event (ibs_op//) in per-thread mode, enable system wide with '-a'. Folowing the suggestion: $ sudo perf record -a -e ibs_op// true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.664 MB perf.data (194 samples) ] $ Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: João Martins <joao.m.martins@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20220322221517.2510440-12-eranian@google.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The AMD IBS error message enhancements will use these, but we're not using evsel__open_strerror() in the python binding so far. Signed-off-by: -
Wei Li authored
We support short command 'rec*' for 'record' and 'rep*' for 'report' in lots of sub-commands, but the matching is not quite strict currnetly. It may be puzzling sometime, like we mis-type a 'recport' to report but it will perform 'record' in fact without any message. To fix this, add a check to ensure that the short cmd is valid prefix of the real command. Committer testing: [root@quaco ~]# perf c2c re sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # perf c2c rec sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ] # perf c2c recport sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # perf c2c record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ] # perf c2c records sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # Signed-off-by:Wei Li <liwei391@huawei.com> Tested-by:
-
Shunsuke Nakamura authored
This patch corrects typos in error messages. I should be "evlist", not "evsel" as the function that fails is perf_evlist__open(). Fixes: 3ce311af ("libperf: Move to tools/lib/perf") Fixes: a7f3713f ("libperf tests: Add test_stat_multiplexing test") Signed-off-by:
Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220325043829.224045-2-nakamura.shun@fujitsu.comSigned-off-by:
-
