- 28 Jul, 2019 28 commits
-
-
Nikolay Aleksandrov authored
[ Upstream commit e57f6185 ] We take a pointer to grec prior to calling pskb_may_pull and use it afterwards to get nsrcs so record nsrcs before the pull when handling igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling mld2 which again could lead to reading 2 bytes out-of-bounds. ================================================================== BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge] Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G OE 5.2.0-rc6+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: dump_stack+0x71/0xab print_address_description+0x6a/0x280 ? br_multicast_rcv+0x480c/0x4ad0 [bridge] __kasan_report+0x152/0x1aa ? br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_rcv+0x480c/0x4ad0 [bridge] kasan_report+0xe/0x20 br_multicast_rcv+0x480c/0x4ad0 [bridge] ? br_multicast_disable_port+0x150/0x150 [bridge] ? ktime_get_with_offset+0xb4/0x150 ? __kasan_kmalloc.constprop.6+0xa6/0xf0 ? __netif_receive_skb+0x1b0/0x1b0 ? br_fdb_update+0x10e/0x6e0 [bridge] ? br_handle_frame_finish+0x3c6/0x11d0 [bridge] br_handle_frame_finish+0x3c6/0x11d0 [bridge] ? br_pass_frame_up+0x3a0/0x3a0 [bridge] ? virtnet_probe+0x1c80/0x1c80 [virtio_net] br_handle_frame+0x731/0xd90 [bridge] ? select_idle_sibling+0x25/0x7d0 ? br_handle_frame_finish+0x11d0/0x11d0 [bridge] __netif_receive_skb_core+0xced/0x2d70 ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring] ? do_xdp_generic+0x20/0x20 ? virtqueue_napi_complete+0x39/0x70 [virtio_net] ? virtnet_poll+0x94d/0xc78 [virtio_net] ? receive_buf+0x5120/0x5120 [virtio_net] ? __netif_receive_skb_one_core+0x97/0x1d0 __netif_receive_skb_one_core+0x97/0x1d0 ? __netif_receive_skb_core+0x2d70/0x2d70 ? _raw_write_trylock+0x100/0x100 ? __queue_work+0x41e/0xbe0 process_backlog+0x19c/0x650 ? _raw_read_lock_irq+0x40/0x40 net_rx_action+0x71e/0xbc0 ? __switch_to_asm+0x40/0x70 ? napi_complete_done+0x360/0x360 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __schedule+0x85e/0x14d0 __do_softirq+0x1db/0x5f9 ? takeover_tasklets+0x5f0/0x5f0 run_ksoftirqd+0x26/0x40 smpboot_thread_fn+0x443/0x680 ? sort_range+0x20/0x20 ? schedule+0x94/0x210 ? __kthread_parkme+0x78/0xf0 ? sort_range+0x20/0x20 kthread+0x2ae/0x3a0 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0xffffc000000000() raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Reported-by:
Martin Weinelt <martin@linuxlounge.net> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aya Levin authored
[ Upstream commit ef1ce7d7 ] Check return value from mlx5e_attach_netdev, add error path on failure. Fixes: 48935bbb ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Peter Kosyh authored
[ Upstream commit 107e47cc ] vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing using ip/ipv6 addresses, but don't make sure the header is available in skb->data[] (skb_headlen() is less then header size). Case: 1) igb driver from intel. 2) Packet size is greater then 255. 3) MPLS forwards to VRF device. So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound() functions. Signed-off-by:
Peter Kosyh <p.kosyh@gmail.com> Reviewed-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Christoph Paasch authored
[ Upstream commit e858faf5 ] If an app is playing tricks to reuse a socket via tcp_disconnect(), bytes_acked/received needs to be reset to 0. Otherwise tcp_info will report the sum of the current and the old connection.. Cc: Eric Dumazet <edumazet@google.com> Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info") Fixes: bdd1f9ed ("tcp: add tcpi_bytes_received to tcp_info") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 8d650cde ] Neal reported incorrect use of ns_capable() from bpf hook. bpf_setsockopt(...TCP_CONGESTION...) -> tcp_set_congestion_control() -> ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN) -> ns_capable_common() -> current_cred() -> rcu_dereference_protected(current->cred, 1) Accessing 'current' in bpf context makes no sense, since packets are processed from softirq context. As Neal stated : The capability check in tcp_set_congestion_control() was written assuming a system call context, and then was reused from a BPF call site. The fix is to add a new parameter to tcp_set_congestion_control(), so that the ns_capable() call is only performed under the right context. Fixes: 91b5b21c ("bpf: Add support for changing congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b617158d ] Some applications set tiny SO_SNDBUF values and expect TCP to just work. Recent patches to address CVE-2019-11478 broke them in case of losses, since retransmits might be prevented. We should allow these flows to make progress. This patch allows the first and last skb in retransmit queue to be split even if memory limits are hit. It also adds the some room due to the fact that tcp_sendmsg() and tcp_sendpage() might overshoot sk_wmem_queued by about one full TSO skb (64KB size). Note this allowance was already present in stable backports for kernels < 4.15 Note for < 4.15 backports : tcp_rtx_queue_tail() will probably look like : static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk) { struct sk_buff *skb = tcp_send_head(sk); return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk); } Fixes: f070ef2a ("tcp: tcp_fragment() should apply sane memory limits") Signed-off-by:
Andrew Prout <aprout@ll.mit.edu> Tested-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
-
Takashi Iwai authored
[ Upstream commit a261e379 ] The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496Reported-and-tested-by:
Marcus Seyfarth <m.seyfarth@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Xin Long authored
[ Upstream commit 9b6c0887 ] Now when sctp_connect() is called with a wrong sa_family, it binds to a port but doesn't set bp->port, then sctp_get_af_specific will return NULL and sctp_connect() returns -EINVAL. Then if sctp_bind() is called to bind to another port, the last port it has bound will leak due to bp->port is NULL by then. sctp_connect() doesn't need to bind ports, as later __sctp_connect will do it if bp->port is NULL. So remove it from sctp_connect(). While at it, remove the unnecessary sockaddr.sa_family len check as it's already done in sctp_inet_connect. Fixes: 644fbdea ("sctp: fix the issue that flags are ignored when using kernel_connect") Reported-by: syzbot+079bf326b38072f849d9@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 4d141581 ] It allocates the extended area for outbound streams only on sendmsg calls, if they are not yet allocated. When using the priority stream scheduler, this initialization may imply into a subsequent allocation, which may fail. In this case, it was aborting the stream scheduler initialization but leaving the ->ext pointer (allocated) in there, thus in a partially initialized state. On a subsequent call to sendmsg, it would notice the ->ext pointer in there, and trip on uninitialized stuff when trying to schedule the data chunk. The fix is undo the ->ext initialization if the stream scheduler initialization fails and avoid the partially initialized state. Although syzkaller bisected this to commit 4ff40b86 ("sctp: set chunk transport correctly when it's a new asoc"), this bug was actually introduced on the commit I marked below. Reported-by: syzbot+c1a380d42b190ad1e559@syzkaller.appspotmail.com Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Tested-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
David Howells authored
[ Upstream commit e835ada0 ] If sendmsg() or sendmmsg() is called on a connected socket that hasn't had bind() called on it, then an oops will occur when the kernel tries to connect the call because no local endpoint has been allocated. Fix this by implicitly binding the socket if it is in the RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state. Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this to prevent further attempts to bind it. This can be tested with: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> static const unsigned char inet6_addr[16] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa }; int main(void) { struct sockaddr_rxrpc srx; struct cmsghdr *cm; struct msghdr msg; unsigned char control[16]; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = 0x21; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = 0x1c; srx.transport.sin6.sin6_family = AF_INET6; srx.transport.sin6.sin6_port = htons(0x4e22); srx.transport.sin6.sin6_flowinfo = htons(0x4e22); srx.transport.sin6.sin6_scope_id = htons(0xaa3b); memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16); cm = (struct cmsghdr *)control; cm->cmsg_len = CMSG_LEN(sizeof(unsigned long)); cm->cmsg_level = SOL_RXRPC; cm->cmsg_type = RXRPC_USER_CALL_ID; *(unsigned long *)CMSG_DATA(cm) = 0; msg.msg_name = NULL; msg.msg_namelen = 0; msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = control; msg.msg_controllen = cm->cmsg_len; msg.msg_flags = 0; fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET); connect(fd, (struct sockaddr *)&srx, sizeof(srx)); sendmsg(fd, &msg, 0); return 0; } Leading to the following oops: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_connect_call+0x42/0xa01 ... Call Trace: ? mark_held_locks+0x47/0x59 ? __local_bh_enable_ip+0xb6/0xba rxrpc_new_client_call+0x3b1/0x762 ? rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_sendmsg+0x16b/0x1b5 sock_sendmsg+0x2d/0x39 ___sys_sendmsg+0x1a4/0x22a ? release_sock+0x19/0x9e ? reacquire_held_locks+0x136/0x160 ? release_sock+0x19/0x9e ? find_held_lock+0x2b/0x6e ? __lock_acquire+0x268/0xf73 ? rxrpc_connect+0xdd/0xe4 ? __local_bh_enable_ip+0xb6/0xba __sys_sendmsg+0x5e/0x94 do_syscall_64+0x7d/0x1bf entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 2341e077 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op") Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit fe4e8db0 ] On RTL8411b the RX unit gets confused if the PHY is powered-down. This was reported in [0] and confirmed by Realtek. Realtek provided a sequence to fix the RX unit after PHY wakeup. The issue itself seems to have been there longer, the Fixes tag refers to where the fix applies properly. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075 Fixes: a99790bf ("r8169: Reinstate ASPM Support") Tested-by:
Ionut Radu <ionut.radu@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Yang Wei authored
[ Upstream commit dd006fc4 ] The frags_q is not properly initialized, it may result in illegal memory access when conn_info is NULL. The "goto free_exit" should be replaced by "goto exit". Signed-off-by:
Yang Wei <albin_yang@163.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit acd3e96d ] Commit 86029d10 ("tls: zero the crypto information from tls_context before freeing") added memzero_explicit() calls to clear the key material before freeing struct tls_context, but it missed tls_device.c has its own way of freeing this structure. Replace the missing free. Fixes: 86029d10 ("tls: zero the crypto information from tls_context before freeing") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 4993e5b3 ] Ben Hutchings says: "This is the wrong place to change the queue mapping. stmmac_xmit() is called with a specific TX queue locked, and accessing a different TX queue results in a data race for all of that queue's state. I think this commit should be reverted upstream and in all stable branches. Instead, the driver should implement the ndo_select_queue operation and override the queue mapping there." Fixes: c5acdbee ("net: stmmac: Send TSO packets always from Queue 0") Suggested-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 3f05e688 ] For qdisc's that support TC filters and set TCQ_F_CAN_BYPASS, notably fq_codel, it makes no sense to let packets bypass the TC filters we setup in any scenario, otherwise our packets steering policy could not be enforced. This can be reproduced easily with the following script: ip li add dev dummy0 type dummy ifconfig dummy0 up tc qd add dev dummy0 root fq_codel tc filter add dev dummy0 parent 8001: protocol arp basic action mirred egress redirect dev lo tc filter add dev dummy0 parent 8001: protocol ip basic action mirred egress redirect dev lo ping -I dummy0 192.168.112.1 Without this patch, packets are sent directly to dummy0 without hitting any of the filters. With this patch, packets are redirected to loopback as expected. This fix is not perfect, it only unsets the flag but does not set it back because we have to save the information somewhere in the qdisc if we really want that. Note, both fq_codel and sfq clear this flag in their ->bind_tcf() but this is clearly not sufficient when we don't use any class ID. Fixes: 23624935 ("net_sched: TCQ_F_CAN_BYPASS generalization") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Andrew Lunn authored
[ Upstream commit 0cea0e11 ] The RX power read from the SFP uses units of 0.1uW. This must be scaled to units of uW for HWMON. This requires a divide by 10, not the current 100. With this change in place, sensors(1) and ethtool -m agree: sff2-isa-0000 Adapter: ISA adapter in0: +3.23 V temp1: +33.1 C power1: 270.00 uW power2: 200.00 uW curr1: +0.01 A Laser output power : 0.2743 mW / -5.62 dBm Receiver signal average optical power : 0.2014 mW / -6.96 dBm Reported-by: chris.healy@zii.aero Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
-
John Hurley authored
[ Upstream commit 0e3183cd ] Skbs may have their checksum value populated by HW. If this is a checksum calculated over the entire packet then the CHECKSUM_COMPLETE field is marked. Changes to the data pointer on the skb throughout the network stack still try to maintain this complete csum value if it is required through functions such as skb_postpush_rcsum. The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when changes are made to packet data without a push or a pull. This occurs when the ethertype of the MAC header is changed or when MPLS lse fields are modified. The modification is carried out using the csum_partial function to get the csum of a buffer and add it into the larger checksum. The buffer is an inversion of the data to be removed followed by the new data. Because the csum is calculated over 16 bits and these values align with 16 bits, the effect is the removal of the old value from the CHECKSUM_COMPLETE and addition of the new value. However, the csum fed into the function and the outcome of the calculation are also inverted. This would only make sense if it was the new value rather than the old that was inverted in the input buffer. Fix the issue by removing the bit inverts in the csum_partial calculation. The bug was verified and the fix tested by comparing the folded value of the updated CHECKSUM_COMPLETE value with the folded value of a full software checksum calculation (reset skb->csum to 0 and run skb_checksum_complete(skb)). Prior to the fix the outcomes differed but after they produce the same result. Fixes: 25cd9ba0 ("openvswitch: Add basic MPLS support to kernel") Fixes: bc7cc599 ("openvswitch: update checksum in {push,pop}_mpls") Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 071c3798 ] Neigh timer can be scheduled multiple times from userspace adding multiple neigh entries and forcing the neigh timer scheduling passing NTF_USE in the netlink requests. This will result in a refcount leak and in the following dump stack: [ 32.465295] NEIGH: BUG, double timer add, state is 8 [ 32.465308] CPU: 0 PID: 416 Comm: double_timer_ad Not tainted 5.2.0+ #65 [ 32.465311] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 32.465313] Call Trace: [ 32.465318] dump_stack+0x7c/0xc0 [ 32.465323] __neigh_event_send+0x20c/0x880 [ 32.465326] ? ___neigh_create+0x846/0xfb0 [ 32.465329] ? neigh_lookup+0x2a9/0x410 [ 32.465332] ? neightbl_fill_info.constprop.0+0x800/0x800 [ 32.465334] neigh_add+0x4f8/0x5e0 [ 32.465337] ? neigh_xmit+0x620/0x620 [ 32.465341] ? find_held_lock+0x85/0xa0 [ 32.465345] rtnetlink_rcv_msg+0x204/0x570 [ 32.465348] ? rtnl_dellink+0x450/0x450 [ 32.465351] ? mark_held_locks+0x90/0x90 [ 32.465354] ? match_held_lock+0x1b/0x230 [ 32.465357] netlink_rcv_skb+0xc4/0x1d0 [ 32.465360] ? rtnl_dellink+0x450/0x450 [ 32.465363] ? netlink_ack+0x420/0x420 [ 32.465366] ? netlink_deliver_tap+0x115/0x560 [ 32.465369] ? __alloc_skb+0xc9/0x2f0 [ 32.465372] netlink_unicast+0x270/0x330 [ 32.465375] ? netlink_attachskb+0x2f0/0x2f0 [ 32.465378] netlink_sendmsg+0x34f/0x5a0 [ 32.465381] ? netlink_unicast+0x330/0x330 [ 32.465385] ? move_addr_to_kernel.part.0+0x20/0x20 [ 32.465388] ? netlink_unicast+0x330/0x330 [ 32.465391] sock_sendmsg+0x91/0xa0 [ 32.465394] ___sys_sendmsg+0x407/0x480 [ 32.465397] ? copy_msghdr_from_user+0x200/0x200 [ 32.465401] ? _raw_spin_unlock_irqrestore+0x37/0x40 [ 32.465404] ? lockdep_hardirqs_on+0x17d/0x250 [ 32.465407] ? __wake_up_common_lock+0xcb/0x110 [ 32.465410] ? __wake_up_common+0x230/0x230 [ 32.465413] ? netlink_bind+0x3e1/0x490 [ 32.465416] ? netlink_setsockopt+0x540/0x540 [ 32.465420] ? __fget_light+0x9c/0xf0 [ 32.465423] ? sockfd_lookup_light+0x8c/0xb0 [ 32.465426] __sys_sendmsg+0xa5/0x110 [ 32.465429] ? __ia32_sys_shutdown+0x30/0x30 [ 32.465432] ? __fd_install+0xe1/0x2c0 [ 32.465435] ? lockdep_hardirqs_off+0xb5/0x100 [ 32.465438] ? mark_held_locks+0x24/0x90 [ 32.465441] ? do_syscall_64+0xf/0x270 [ 32.465444] do_syscall_64+0x63/0x270 [ 32.465448] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER' receiving a netlink request with NTF_USE flag set Reported-by:
Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d30 ("neigh: Allow for user space users of the neighbour table") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit b60a7738 ] netfilter did not expect that skb_dst_force() can cause skb to lose its dst entry. I got a bug report with a skb->dst NULL dereference in netfilter output path. The backtrace contains nf_reinject(), so the dst might have been cleared when skb got queued to userspace. Other users were fixed via if (skb_dst(skb)) { skb_dst_force(skb); if (!skb_dst(skb)) goto handle_err; } But I think its preferable to make the 'dst might be cleared' part of the function explicit. In netfilter case, skb with a null dst is expected when queueing in prerouting hook, so drop skb for the other hooks. v2: v1 of this patch returned true in case skb had no dst entry. Eric said: Say if we have two skb_dst_force() calls for some reason on the same skb, only the first one will return false. This now returns false even when skb had no dst, as per Erics suggestion, so callers might need to check skb_dst() first before skb_dst_force(). Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Baruch Siach authored
[ Upstream commit 7b75e49d ] Add a 1ms delay after reset deactivation. Otherwise the chip returns bogus ID value. This is observed with 88E6390 (Peridot) chip. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Reviewed-by:
-
Justin Chen authored
[ Upstream commit 35cbef98 ] Currently we silently ignore filters if we cannot meet the filter requirements. This will lead to the MAC dropping packets that are expected to pass. A better solution would be to set the NIC to promisc mode when the required filters cannot be met. Also correct the number of MDF filters supported. It should be 17, not 16. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 54851aa9 ] When a route needs to be appended to an existing multipath route, fib6_add_rt2node() first appends it to the siblings list and increments the number of sibling routes on each sibling. Later, the function notifies the route via call_fib6_entry_notifiers(). In case the notification is vetoed, the route is not unlinked from the siblings list, which can result in a use-after-free. Fix this by unlinking the route from the siblings list before returning an error. Audited the rest of the call sites from which the FIB notification chain is called and could not find more problems. Fixes: 2233000c ("net/ipv6: Move call_fib6_entry_notifiers up for route adds") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by:
-
David Ahern authored
[ Upstream commit 49d05fe2 ] Paul reported that l2tp sessions were broken after the commit referenced in the Fixes tag. Prior to this commit rt6_check returned NULL if the rt6_info 'from' was NULL - ie., the dst_entry was disconnected from a FIB entry. Restore that behavior. Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by:
Paul Donohue <linux-kernel@PaulSD.com> Tested-by:
-
Matteo Croce authored
[ Upstream commit 2e605463 ] Avoid the situation where an IPV6 only flag is applied to an IPv4 address: # ip addr add 192.0.2.1/24 dev dummy0 nodad home mngtmpaddr noprefixroute # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global noprefixroute dummy0 valid_lft forever preferred_lft forever Or worse, by sending a malicious netlink command: # ip -4 addr show dev dummy0 2: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 inet 192.0.2.1/24 scope global nodad optimistic dadfailed home tentative mngtmpaddr noprefixroute stable-privacy dummy0 valid_lft forever preferred_lft forever Signed-off-by:
Matteo Croce <mcroce@redhat.com> Reviewed-by:
-
Eric Dumazet authored
[ Upstream commit e5b1c6c6 ] im->tomb and/or im->sources might not be NULL, but we currently overwrite their values blindly. Using swap() will make sure the following call to kfree_pmc(pmc) will properly free the psf structures. Tested with the C repro provided by syzbot, which basically does : socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 3 setsockopt(3, SOL_IP, IP_ADD_MEMBERSHIP, "\340\0\0\2\177\0\0\1\0\0\0\0", 12) = 0 ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=0}) = 0 setsockopt(3, SOL_IP, IP_MSFILTER, "\340\0\0\2\177\0\0\1\1\0\0\0\1\0\0\0\377\377\377\377", 20) = 0 ioctl(3, SIOCSIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP}) = 0 exit_group(0) = ? BUG: memory leak unreferenced object 0xffff88811450f140 (size 64): comm "softirq", pid 0, jiffies 4294942448 (age 32.070s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<00000000c7bad083>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000c7bad083>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000c7bad083>] slab_alloc mm/slab.c:3326 [inline] [<00000000c7bad083>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<000000009acc4151>] kmalloc include/linux/slab.h:547 [inline] [<000000009acc4151>] kzalloc include/linux/slab.h:742 [inline] [<000000009acc4151>] ip_mc_add1_src net/ipv4/igmp.c:1976 [inline] [<000000009acc4151>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2100 [<000000004ac14566>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2484 [<0000000052d8f995>] do_ip_setsockopt.isra.0+0x1795/0x1930 net/ipv4/ip_sockglue.c:959 [<000000004ee1e21f>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1248 [<0000000066cdfe74>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2618 [<000000009383a786>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3126 [<00000000d8ac0c94>] __sys_setsockopt+0x98/0x120 net/socket.c:2072 [<000000001b1e9666>] __do_sys_setsockopt net/socket.c:2083 [inline] [<000000001b1e9666>] __se_sys_setsockopt net/socket.c:2080 [inline] [<000000001b1e9666>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2080 [<00000000420d395e>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301 [<000000007fd83a4b>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 24803f38 ("igmp: do not remove igmp souce list info when set link down") Signed-off-by:
-
Haiyang Zhang authored
[ Upstream commit be4363bd ] There is an extra rcu_read_unlock left in netvsc_recv_callback(), after a previous patch that removes RCU from this function. This patch removes the extra RCU unlock. Fixes: 345ac089 ("hv_netvsc: pass netvsc_device to receive callback") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit fdd258d4 ] cfhsi_exit_module() calls unregister_netdev() under rtnl_lock(). but unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: c4125400 ("caif-hsi: Add rtnl support") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Brian King authored
[ Upstream commit ea811b79 ] This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
- 26 Jul, 2019 12 commits
-
-
Greg Kroah-Hartman authored
-
Junxiao Bi authored
commit bd293d07 upstream. When thin-volume is built on loop device, if available memory is low, the following deadlock can be triggered: One process P1 allocates memory with GFP_FS flag, direct alloc fails, memory reclaim invokes memory shrinker in dm_bufio, dm_bufio_shrink_scan() runs, mutex dm_bufio_client->lock is acquired, then P1 waits for dm_buffer IO to complete in __try_evict_buffer(). But this IO may never complete if issued to an underlying loop device that forwards it using direct-IO, which allocates memory using GFP_KERNEL (see: do_blockdev_direct_IO()). If allocation fails, memory reclaim will invoke memory shrinker in dm_bufio, dm_bufio_shrink_scan() will be invoked, and since the mutex is already held by P1 the loop thread will hang, and IO will never complete. Resulting in ABBA deadlock. Cc: stable@vger.kernel.org Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Norbert Manthey authored
commit 4c6d80e1 upstream. The pstore_mkfile() function is passed a pointer to a struct pstore_record. On success it consumes this 'record' pointer and references it from the created inode. On failure, however, it may or may not free the record. There are even two different code paths which return -ENOMEM -- one of which does and the other doesn't free the record. Make the behaviour deterministic by never consuming and freeing the record when returning failure, allowing the caller to do the cleanup consistently. Signed-off-by:
Norbert Manthey <nmanthey@amazon.de> Link: https://lore.kernel.org/r/1562331960-26198-1-git-send-email-nmanthey@amazon.de Fixes: 83f70f07 ("pstore: Do not duplicate record metadata") Fixes: 1dfff7dd ("pstore: Pass record contents instead of copying") Cc: stable@vger.kernel.org [kees: also move "private" allocation location, rename inode cleanup label] Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Josua Mayer authored
commit 80785f5a upstream. Armada 8040 needs four clocks to be enabled for MDIO accesses to work. Update the binding to allow the extra clock to be specified. Cc: stable@vger.kernel.org Fixes: 6d6a331f ("dt-bindings: allow up to three clocks for orion-mdio") Reviewed-by:
Josua Mayer <josua@solid-run.com> Signed-off-by:
-
Josua Mayer authored
commit 4aabed69 upstream. Allow up to four clocks to be specified and enabled for the orion-mdio interface, which are required by the Armada 8k and defined in armada-cp110.dtsi. Fixes a hang in probing the mvmdio driver that was encountered on the Clearfog GT 8K with all drivers built as modules, but also affects other boards such as the MacchiatoBIN. Cc: stable@vger.kernel.org Fixes: 96cb4342 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Reviewed-by:
-
Tejun Heo authored
commit f539da82 upstream. Depending on the number of devices, blkcg stats can go over the default seqfile buf size. seqfile normally retries with a larger buffer but since the ->pd_stat() addition, blkcg_print_stat() doesn't tell seqfile that overflow has happened and the output gets printed truncated. Fix it by calling seq_commit() w/ -1 on possible overflows. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: 903d23f0 ("blk-cgroup: allow controllers to output their own stats") Cc: stable@vger.kernel.org # v4.19+ Cc: Josef Bacik <jbacik@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tejun Heo authored
commit 5de0073f upstream. If use_delay was non-zero when the latency target of a cgroup was set to zero, it will stay stuck until io.latency is enabled on the cgroup again. This keeps readahead disabled for the cgroup impacting performance negatively. Signed-off-by:
-
Peng Fan authored
commit 5b933e28 upstream. There is no audio_pll2_clk registered, it should be audio_pll2_out. Cc: <stable@vger.kernel.org> Fixes: ba5625c3 ("clk: imx: Add clock driver support for imx8mm") Signed-off-by:
Peng Fan <peng.fan@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 3a10f999 upstream. After commit 991f61fe ("Blk-throttle: reduce tail io latency when iops limit is enforced") wait time could be zero even if group is throttled and cannot issue requests right now. As a result throtl_select_dispatch() turns into busy-loop under irq-safe queue spinlock. Fix is simple: always round up target time to the next throttle slice. Fixes: 991f61fe ("Blk-throttle: reduce tail io latency when iops limit is enforced") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Lee, Chiasheng authored
commit e244c469 upstream. With Link Power Management (LPM) enabled USB3 links transition to low power U1/U2 link states from U0 state automatically. Current hub code detects USB3 remote wakeups by checking if the software state still shows suspended, but the link has transitioned from suspended U3 to enabled U0 state. As it takes some time before the hub thread reads the port link state after a USB3 wake notification, the link may have transitioned from U0 to U1/U2, and wake is not detected by hub code. Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup handling This patch should be added to stable kernels since 4.13 where LPM was kept enabled during suspend/resume Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by:
Lee, Chiasheng <chiasheng.lee@intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
commit 23c84eb7 upstream. RocksDB can hang indefinitely when using a DAX file. This is due to a bug in the XArray conversion when handling a PMD fault and finding a PTE entry. We use the wrong index in the hash and end up waiting on the wrong waitqueue. There's actually no need to wait; if we find a PTE entry while looking for a PMD entry, we can return immediately as we know we should fall back to a PTE fault (which may not conflict with the lock held). We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found. This value can never be found in an XArray while holding its lock, so it does not create an ambiguity. Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com Fixes: b15cd800 ("dax: Convert page fault handlers to XArray") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Robert Barror <robert.barror@intel.com> Reported-by:
Seema Pandit <seema.pandit@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Szymon Janc authored
commit 1d87b88b upstream. Microsoft Surface Precision Mouse provides bogus identity address when pairing. It connects with Static Random address but provides Public Address in SMP Identity Address Information PDU. Address has same value but type is different. Workaround this by dropping IRK if ID address discrepancy is detected. > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete (0x01) Status: Success (0x00) Handle: 75 Role: Master (0x00) Peer address type: Random (0x01) Peer address: E0:52:33:93:3B:21 (Static) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 .... > ACL Data RX: Handle 75 flags 0x02 dlen 12 SMP: Identity Address Information (0x09) len 7 Address type: Public (0x00) Address: E0:52:33:93:3B:21 Signed-off-by:
Szymon Janc <szymon.janc@codecoup.pl> Tested-by:
Maarten Fonville <maarten.fonville@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199461 Cc: stable@vger.kernel.org Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
