Pull tracing updates from Steven Rostedt:
 "New tracing features:

   - The ring buffer is no longer disabled when reading the trace file.

     The trace_pipe file was made to be used for live tracing and
     reading as it acted like the normal producer/consumer. As the trace
     file would not consume the data, the easy way of handling it was to
     just disable writes to the ring buffer.

     This came to a surprise to the BPF folks who complained about lost
     events due to reading. This is no longer an issue. If someone wants
     to keep the old disabling there's a new option "pause-on-trace"
     that can be set.

   - New set_ftrace_notrace_pid file. PIDs in this file will not be
     traced by the function tracer.

     Similar to set_ftrace_pid, which makes the function tracer only
     trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
     does the reverse.

   - New set_event_notrace_pid file. PIDs in this file will cause events
     not to be traced if triggered by a task with a matching PID.

     Similar to the set_event_pid file but will not be traced. Note,
     sched_waking and sched_switch events may still be traced if one of
     the tasks referenced by those events contains a PID that is allowed
     to be traced.

  Tracing related features:

   - New bootconfig option, that is attached to the initrd file.

     If bootconfig is on the command line, then the initrd file is
     searched looking for a bootconfig appended at the end.

   - New GPU tracepoint infrastructure to help the gfx drivers to get
     off debugfs (acked by Greg Kroah-Hartman)

  And other minor updates and fixes"

* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Do not allocate buffer in trace_find_next_entry() in atomic
  tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
  selftests/ftrace: Add test to test new set_event_notrace_pid file
  selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
  tracing: Create set_event_notrace_pid to not trace tasks
  ftrace: Create set_ftrace_notrace_pid to not trace tasks
  ftrace: Make function trace pid filtering a bit more exact
  ftrace/kprobe: Show the maxactive number on kprobe_events
  tracing: Have the document reflect that the trace file keeps tracing enabled
  ring-buffer/tracing: Have iterator acknowledge dropped events
  tracing: Do not disable tracing when reading the trace file
  ring-buffer: Do not disable recording when there is an iterator
  ring-buffer: Make resize disable per cpu buffer instead of total buffer
  ring-buffer: Optimize rb_iter_head_event()
  ring-buffer: Do not die if rb_iter_peek() fails more than thrice
  ring-buffer: Have rb_iter_head_event() handle concurrent writer
  ring-buffer: Add page_stamp to iterator for synchronization
  ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
  ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
  tracing: Save off entry when peeking at next entry
  ...

Pull keyrings fixes from David Howells:
 "Here's a couple of patches that fix a circular dependency between
  holding key->sem and mm->mmap_sem when reading data from a key.

  One potential issue is that a filesystem looking to use a key inside,
  say, ->readpages() could deadlock if the key being read is the key
  that's required and the buffer the key is being read into is on a page
  that needs to be fetched.

  The case actually detected is a bit more involved - with a filesystem
  calling request_key() and locking the target keyring for write - which
  could be being read"

* tag 'keys-fixes-20200329' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  KEYS: Avoid false positive ENOMEM error on key read
  KEYS: Don't write out to userspace while holding key semaphore

Pull drm hugepage support from Dave Airlie:
 "This adds support for hugepages to TTM and has been tested with the
  vmwgfx drivers, though I expect other drivers to start using it"

* tag 'drm-next-2020-04-03-1' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Hook up the helpers to align buffer objects
  drm/vmwgfx: Introduce a huge page aligning TTM range manager
  drm: Add a drm_get_unmapped_area() helper
  drm/vmwgfx: Support huge page faults
  drm/ttm, drm/vmwgfx: Support huge TTM pagefaults
  mm: Add vmf_insert_pfn_xxx_prot() for huge page-table entries
  mm: Split huge pages on write-notify or COW
  mm: Introduce vma_is_special_huge
  fs: Constify vma argument to vma_is_dax

Pull exfat filesystem from Al Viro:
 "Shiny new fs/exfat replacement for drivers/staging/exfat"

* 'work.exfat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  exfat: update file system parameter handling
  staging: exfat: make staging/exfat and fs/exfat mutually exclusive
  MAINTAINERS: add exfat filesystem
  exfat: add Kconfig and Makefile
  exfat: add nls operations
  exfat: add misc operations
  exfat: add exfat cache
  exfat: add bitmap operations
  exfat: add fat entry operations
  exfat: add file operations
  exfat: add directory operations
  exfat: add inode operations
  exfat: add super block operations
  exfat: add in-memory and on-disk structures and headers

Pull nfsd updates from Chuck Lever:

 - Fix EXCHANGE_ID response when NFSD runs in a container

 - A battery of new static trace points

 - Socket transports now use bio_vec to send Replies

 - NFS/RDMA now supports filesystems with no .splice_read method

 - Favor memcpy() over DMA mapping for small RPC/RDMA Replies

 - Add pre-requisites for supporting multiple Write chunks

 - Numerous minor fixes and clean-ups

[ Chuck is filling in for Bruce this time while he and his family settle
  into a new house ]

* tag 'nfsd-5.7' of git://git.linux-nfs.org/projects/cel/cel-2.6: (39 commits)
  svcrdma: Fix leak of transport addresses
  SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()'
  SUNRPC/cache: don't allow invalid entries to be flushed
  nfsd: fsnotify on rmdir under nfsd/clients/
  nfsd4: kill warnings on testing stateids with mismatched clientids
  nfsd: remove read permission bit for ctl sysctl
  NFSD: Fix NFS server build errors
  sunrpc: Add tracing for cache events
  SUNRPC/cache: Allow garbage collection of invalid cache entries
  nfsd: export upcalls must not return ESTALE when mountd is down
  nfsd: Add tracepoints for update of the expkey and export cache entries
  nfsd: Add tracepoints for exp_find_key() and exp_get_by_name()
  nfsd: Add tracing to nfsd_set_fh_dentry()
  nfsd: Don't add locks to closed or closing open stateids
  SUNRPC: Teach server to use xprt_sock_sendmsg for socket sends
  SUNRPC: Refactor xs_sendpages()
  svcrdma: Avoid DMA mapping small RPC Replies
  svcrdma: Fix double sync of transport header buffer
  svcrdma: Refactor chunk list encoders
  SUNRPC: Add encoders for list item discriminators
  ...

Pull RTC updates from Alexandre Belloni:
 "More cleanup this cycle, with the final goal of removing the
  rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have
  been modified for this now are ready for the end of times (whether it
  happens in 2033, 2038, 2106, 2127 or even 4052). There is also a
  single new driver and the usual fixes and features.

  Summary:

  Subsystem:

   - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been
     removed and only the 64bit version remain.

   - hctosys now works with drivers compiled as modules

  New driver:

   - MediaTek MT2712 SoC based RTC

  Drivers:

   - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305,
     ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc,
     starfire, sun6i

   - ds1307: DS1388 oscillator failure detection and watchdog support

   - jz4740: JZ4760 support

   - pcf85063: clock out pin support

   - sun6i: external 32k oscillator is now optional, the range is now
     handled by the core, providing a solution for 2034"

* tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits)
  rtc: ds1307: check for failed memory allocation on wdt
  rtc: class: remove redundant assignment to variable err
  rtc: remove rtc_time_to_tm and rtc_tm_to_time
  rtc: sun6i: let the core handle rtc range
  rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: ds1307: add support for watchdog timer on ds1388
  rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: da9052: set range
  rtc: da9052: convert to devm_rtc_allocate_device
  rtc: imx-sc: Align imx sc msg structs to 4
  rtc: fsl-ftm-alarm: report alarm to core
  rtc: pcf85063: Add pcf85063 clkout control to common clock framework
  rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space
  rtc: class: avoid unnecessary lookup in hctosys
  dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML
  rtc: jz4740: Rename vendor-specific DT properties
  rtc: jz4740: Add support for JZ4760 SoC
  rtc: class: support hctosys from modular RTC drivers
  rtc: pm8xxx: clear alarm register when alarm is not enabled
  rtc: omap: drop unused dt-bindings header
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO development for the v5.7 kernel cycle.

  Core and userspace API:

   - The userspace API KFIFOs have been imoproved with locks that do not
     block interrupts. This makes us better at getting events to
     userspace without blocking or disturbing new events arriving in the
     same time. This was reviewed by the KFIFO maintainer Stefani. This
     is a generic improvement which paves the road for similar
     improvements in other subsystems.

   - We provide a new ioctl() for monitoring changes in the line
     information, such as when multiple clients are taking lines and
     giving them back, possibly reconfiguring them in the process: we
     can now monitor that and not get stuck with stale static
     information.

   - An example tool 'gpio-watch' is provided to showcase this
     functionality.

   - Timestamps for events are switched to ktime_get_ns() which is
     monotonic. We previously had a 'realtime' stamp which could move
     forward and *backward* in time, which probably would just cause
     silent bugs and weird behaviour. In the long run we see two
     relevant timestamps: ktime_get_ns() or the timestamp sometimes
     provided by the GPIO hardware itself, if that exists.

   - Device Tree overlay support for GPIO hogs. On systems that load
     overlays, these overlays can now contain hogs, and will then be
     respected.

   - Handle pin control interaction with nonexisting pin ranges in the
     GPIO library core instead of in the individual drivers.

  New drivers:

   - New driver for the Mellanox BlueField 2 GPIO controller.

  Driver improvements:

   - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
     library and use this flag in the MT7621 driver.

   - Texas Instruments OMAP CPU power management improvements, such as
     blocking of idle on pending GPIO interrupts"

* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
  Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
  pinctrl: Unconditionally assign .request()/.free()
  gpio: Unconditionally assign .request()/.free()
  gpio: export of_pinctrl_get to modules
  pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
  gpio: Rename variable in core APIs
  gpio: Avoid using pin ranges with !PINCTRL
  gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
  gpiolib: Pass gpio_desc to gpio_set_config()
  gpiolib: Introduce gpiod_set_config()
  tools: gpio: Fix out-of-tree build regression
  gpio: gpiolib: fix a doc warning
  gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
  gpio: tegra186: Add support for pin ranges
  gpio: Support GPIO controllers without pin-ranges
  ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
  gpio: brcmstb: support gpio-line-names property
  tools: gpio: Fix typo in gpio-utils
  tools: gpio-hammer: Apply scripts/Lindent and retain good changes
  gpiolib: gpio_name_to_desc: factor out !name check
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - fix an integer overflow in the coherent pool (Kevin Grandemange)

 - provide support for in-place uncached remapping and use that for
   openrisc

 - fix the arm coherent allocator to take the bus limit into account

* tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping:
  ARM/dma-mapping: merge __dma_supported into arm_dma_supported
  ARM/dma-mapping: take the bus limit into account in __dma_alloc
  ARM/dma-mapping: remove get_coherent_dma_mask
  openrisc: use the generic in-place uncached DMA allocator
  dma-direct: provide a arch_dma_clear_uncached hook
  dma-direct: make uncached_kernel_address more general
  dma-direct: consolidate the error handling in dma_direct_alloc_pages
  dma-direct: remove the cached_kernel_address hook
  dma-coherent: fix integer overflow in the reserved-memory dma allocation

Pull thread updates from Christian Brauner:
 "The main change for this cycle was the extension for clone3() to
  support spawning processes directly into cgroups via CLONE_INTO_CGROUP
  (commit ef2c41cf: "clone3: allow spawning processes
  into cgroups").

  But since I had to touch kernel/cgroup/ quite a bit I had Tejun route
  that through his tree this time around to make it easier for him to
  handle other changes.

  So here is just the unexciting leftovers: a regression test for the
  ENOMEM regression we fixed in commit b26ebfe1 ("pid: Fix error
  return value in some cases") verifying that we report ENOMEM when
  trying to create a new process in a pid namespace whose init
  process/subreaper has already exited"

* tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests: add pid namespace ENOMEM regression test

Pull VFIO updates from Alex Williamson:

 - vfio-pci SR-IOV support (Alex Williamson)

 - vfio DMA read/write interface (Yan Zhao)

 - Fix vfio-platform erroneous IRQ error log (Eric Auger)

 - Fix shared ATSD support for NVLink on POWER (Sam Bobroff)

 - Fix init error without CONFIG_IOMMU_DMA (Andre Przywara)

* tag 'vfio-v5.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Ignore -ENODEV when getting MSI cookie
  vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]
  vfio/pci: Cleanup .probe() exit paths
  vfio/pci: Remove dev_fmt definition
  vfio/pci: Add sriov_configure support
  vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first user
  vfio/pci: Introduce VF token
  vfio/pci: Implement match ops
  vfio: Include optional device match in vfio_device_ops callbacks
  vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pages
  vfio: introduce vfio_dma_rw to read/write a range of IOVAs
  vfio: allow external user to get vfio group from device
  vfio: platform: Switch to platform_get_irq_optional()

Pull s390 updates from Vasily Gorbik:

 - Update maintainers. Niklas Schnelle takes over zpci and Vineeth
   Vijayan common io code.

 - Extend cpuinfo to include topology information.

 - Add new extended counters for IBM z15 and sampling buffer allocation
   rework in perf code.

 - Add control over zeroing out memory during system restart.

 - CCA protected key block version 2 support and other
   fixes/improvements in crypto code.

 - Convert to new fallthrough; annotations.

 - Replace zero-length arrays with flexible-arrays.

 - QDIO debugfs and other small improvements.

 - Drop 2-level paging support optimization for compat tasks. Varios mm
   cleanups.

 - Remove broken and unused hibernate / power management support.

 - Remove fake numa support which does not bring any benefits.

 - Exclude offline CPUs from CPU topology masks to be more consistent
   with other architectures.

 - Prevent last branching instruction address leaking to userspace.

 - Other small various fixes and improvements all over the code.

* tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits)
  s390/mm: cleanup init_new_context() callback
  s390/mm: cleanup virtual memory constants usage
  s390/mm: remove page table downgrade support
  s390/qdio: set qdio_irq->cdev at allocation time
  s390/qdio: remove unused function declarations
  s390/ccwgroup: remove pm support
  s390/ap: remove power management code from ap bus and drivers
  s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc
  s390/mm: cleanup arch_get_unmapped_area() and friends
  s390/ism: remove pm support
  s390/cio: use fallthrough;
  s390/vfio: use fallthrough;
  s390/zcrypt: use fallthrough;
  s390: use fallthrough;
  s390/cpum_sf: Fix wrong page count in error message
  s390/diag: fix display of diagnose call statistics
  s390/ap: Remove ap device suspend and resume callbacks
  s390/pci: Improve handling of unset UID
  s390/pci: Fix zpci_alloc_domain() over allocation
  s390/qdio: pass ISC as parameter to chsc_sadc()
  ...

Pull ARC updates from Vineet Gupta:

 - Support for DSP enabled userspace (save/restore regs)

 - Misc other platform fixes

* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: allow userspace DSP applications to use AGU extensions
  ARC: add support for DSP-enabled userspace applications
  ARC: handle DSP presence in HW
  ARC: add helpers to sanitize config options
  ARC: [plat-axs10x]: PGU: remove unused encoder-slave property

Pull ARM devicetree updates from Arnd Bergmann:
 "Most of the commits are for additional hardware support and minor
  fixes for existing machines for all the usual platforms: qcom,
  amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
  uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
  sunxi, broadcom, omap, and versatile.

  The conversion of binding files to machine-readable yaml format
  continues, along with fixes found during the validation. Andre
  Przywara takes over maintainership for the old Calxeda Highbank
  platform and provides a number of updates.

  The OMAP2+ platforms see a continued move from platform data into dts
  files, for many devices that relied on a mix of auxiliary data in
  addition to the DT description

  A moderate number of new SoCs and machines are added, here is a full
  list:

   - Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
     (SM8250) is the current high-end phone chip, and IPQ6018 is a new
     WiFi-6 router chip.

   - Mediatek MT8516 application processor SoC for voice assistants,
     along with the "pumpkin" development board

   - NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
     evaluation board.

   - Kontron "sl28" board family based on NXP LS1028A

   - Eleven variations of the new i.MX6 TechNexion Pico board, combining
     the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
     SoM carriers

   - Three additional variants of the Toradex Colibri board family, all
     based on versions of the NXP i.MX7.

   - The Pinebook Pro laptop based on Rockchip RK3399

   - Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
     on the ST-Ericsson u8500 platform

   - DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
     STMicroelectronics stm32mp157

   - Renesas M3ULCB starter kit for R-Car M3-W+

   - Hoperun HiHope development board with Renesas RZ/G2M

   - Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
     A64

   - Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
     A20

   - PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"

* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
  ARM: dts: ux500: Fix missing node renames
  arm64: dts: Revert "specify console via command line"
  MAINTAINERS: Update Calxeda Highbank maintainership
  arm: dts: calxeda: Group port-phys and sgpio-gpio items
  arm: dts: calxeda: Fix interrupt grouping
  arm: dts: calxeda: Provide UART clock
  arm: dts: calxeda: Basic DT file fixes
  arm64: dts: specify console via command line
  ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
  ARM: dts: gemini: Add thermal zone to DIR-685
  ARM: dts: gemini: Rename IDE nodes
  ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
  arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
  arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
  arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
  arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
  arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
  arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
  arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
  arm64: dts: khadas-vim3: add SPIFC controller node
  ...

Pull ARM defconfig updates from Arnd Bergmann:
 "As usual, tons of new drivers and other options got merged and are now
  enabled in the defconfig files, usually as loadable modules"

* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
  ARM: omap2plus_defconfig: Update for moved and dropped options
  ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
  ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable zram as loadable modules
  ARM: omap2plus_defconfig: Enable simple-pm-bus
  arm64: defconfig: Enable Qualcomm SDM845 audio configs
  arm64: defconfig: Enable e1000 device
  arm64: defconfig: Enable PHY devices used on QorIQ boards
  arm64: defconfig: Enable RTC devices for QorIQ boards
  arm64: defconfig: Enable flash device drivers for QorIQ boards
  arm64: defconfig: Enable ARM Mali display driver
  arm64: defconfig: Enable QorIQ GPIO driver
  arm64: defconfig: Enable QorIQ IFC NAND controller driver
  arm64: defconfig: Enable ARM SBSA watchdog driver
  arm64: defconfig: Enable QorIQ cpufreq driver
  arm64: defconfig: Enable NXP/FSL SPI controller drivers
  arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
  arm64: defconfig: Enable QorIQ DPAA2 drivers
  arm64: defconfig: Enable QorIQ DPAA1 drivers
  ...

Pull ARM driver updates from Arnd Bergmann:
 "These are the usual updates for SoC specific device drivers and
  related subsystems that don't have their own top-level maintainers:

   - ARM SCMI/SCPI updates to allow pluggable transport layers

   - TEE subsystem cleanups

   - A new driver for the Amlogic secure power domain controller

   - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU
     and TI OMAP2+ sysc drivers.

   - Qualcomm SoC driver updates, including a new library module for
     "protection domain" notifications

   - Lots of smaller bugfixes and cleanups in other drivers"

* tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits)
  soc: fsl: qe: fix sparse warnings for ucc_slow.c
  soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure
  soc: fsl: qe: fix sparse warnings for ucc_fast.c
  soc: fsl: qe: fix sparse warnings for qe_ic.c
  soc: fsl: qe: fix sparse warnings for ucc.c
  soc: fsl: qe: fix sparse warning for qe_common.c
  soc: fsl: qe: fix sparse warnings for qe.c
  soc: qcom: Fix QCOM_APR dependencies
  soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb
  soc: imx: drop COMPILE_TEST for IMX_SCU_SOC
  firmware: imx: add COMPILE_TEST for IMX_SCU driver
  soc: imx: gpc: fix power up sequencing
  soc: imx: increase build coverage for imx8m soc driver
  soc: qcom: apr: Add avs/audio tracking functionality
  dt-bindings: soc: qcom: apr: Add protection domain bindings
  soc: qcom: Introduce Protection Domain Restart helpers
  devicetree: bindings: firmware: add ipq806x to qcom_scm
  memory: tegra: Correct debugfs clk rate-range on Tegra124
  memory: tegra: Correct debugfs clk rate-range on Tegra30
  memory: tegra: Correct debugfs clk rate-range on Tegra20
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "The code changes are mostly for 32-bit platforms and include:

   - Lots of updates for the Nvidia Tegra platform, including cpuidle,
     pmc, and dt-binding changes

   - Microchip at91 power management updates for the recently added
     sam9x60 SoC

   - Treewide setup_irq deprecation by afzal mohammed

   - STMicroelectronics stm32 gains earlycon support

   - Renesas platforms with Cortex-A9 can now use the global timer

   - Some TI OMAP2+ platforms gain cpuidle support

   - Various cleanups for the i.MX6 and Orion platforms, as well as
     Kconfig files across all platforms"

* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
  ARM: qcom: Add support for IPQ40xx
  ARM: mmp: replace setup_irq() by request_irq()
  ARM: cns3xxx: replace setup_irq() by request_irq()
  ARM: spear: replace setup_irq() by request_irq()
  ARM: ep93xx: Replace setup_irq() by request_irq()
  ARM: iop32x: replace setup_irq() by request_irq()
  arm: mach-dove: Mark dove_io_desc as __maybe_unused
  ARM: orion: replace setup_irq() by request_irq()
  ARM: debug: stm32: add UART early console support for STM32MP1
  ARM: debug: stm32: add UART early console support for STM32H7
  ARM: debug: stm32: add UART early console configuration for STM32F7
  ARM: debug: stm32: add UART early console configuration for STM32F4
  cpuidle: tegra: Disable CC6 state if LP2 unavailable
  cpuidle: tegra: Squash Tegra114 driver into the common driver
  cpuidle: tegra: Squash Tegra30 driver into the common driver
  cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
  ARM: tegra: cpuidle: Remove unnecessary memory barrier
  ARM: tegra: cpuidle: Make abort_flag atomic
  ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
  ARM: tegra: Make outer_disable() open-coded
  ...

Merge tag 'for-5.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix excessive bio splitting that caused performance regressions

 - Fix logic bug in DM integrity discard support's integrity tag testing

 - Fix DM integrity warning on ppc64le due to missing cast

* tag 'for-5.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: fix logic bug in integrity tag testing
  Revert "dm: always call blk_queue_split() in dm_process_bio()"
  dm integrity: fix ppc64le warning

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)

   - Add more 32 GT/s link speed decoding and improve the implementation
     (Yicong Yang)

  Resource management:

   - Add support for sizing programmable host bridge apertures and fix a
     related alpha Nautilus regression (Ivan Kokshaysky)

  Interrupts:

   - Add boot interrupt quirk mechanism for Xeon chipsets and document
     boot interrupts (Sean V Kelley)

  PCIe native device hotplug:

   - When possible, disable in-band presence detect and use PDS
     (Alexandru Gagniuc)

   - Add DMI table for devices that don't use in-band presence detection
     but don't advertise that correctly (Stuart Hayes)

   - Fix hang when powering slots up/down via sysfs (Lukas Wunner)

   - Fix an MSI interrupt race (Stuart Hayes)

  Virtualization:

   - Add ACS quirks for Zhaoxin devices (Raymond Pang)

  Error handling:

   - Add Error Disconnect Recover (EDR) support so firmware can report
     devices disconnected via DPC and we can try to recover (Kuppuswamy
     Sathyanarayanan)

  Peer-to-peer DMA:

   - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
     Maier)

  ASPM:

   - Reduce severity of common clock config message (Chris Packham)

   - Clear the correct bits when enabling L1 substates, so we don't go
     to the wrong state (Yicong Yang)

  Endpoint framework:

   - Replace EPF linkup ops with notifier call chain and improve locking
     (Kishon Vijay Abraham I)

   - Fix concurrent memory allocation in OB address region (Kishon Vijay
     Abraham I)

   - Move PF function number assignment to EPC core to support multiple
     function creation methods (Kishon Vijay Abraham I)

   - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)

   - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
     Offset (Kishon Vijay Abraham I)

   - Add support for testing DMA transfers (Kishon Vijay Abraham I)

   - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)

   - Add support for tests to clear IRQ (Kishon Vijay Abraham I)

   - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)

  Amlogic Meson PCIe controller driver:

   - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
     Pommarel)

   - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
     Pommarel)

  Cadence PCIe controller driver:

   - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
     Abraham I)

  Intel VMD host bridge driver:

   - Add two VMD Device IDs that require bus restriction mode (Sushma
     Kalakota)

  Mobiveil PCIe controller driver:

   - Refactor and modularize mobiveil driver (Hou Zhiqiang)

   - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)

  Microsoft Hyper-V host bridge driver:

   - Add support for Hyper-V PCI protocol version 1.3 and
     PCI_BUS_RELATIONS2 (Long Li)

   - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
     Feng)

   - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:

   - Use pci_parse_request_of_pci_ranges() (Rob Herring)

   - Add support for endpoint mode and related DT updates (Vidya Sagar)

   - Reduce -EPROBE_DEFER error message log level (Thierry Reding)

  Qualcomm PCIe controller driver:

   - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)

  Synopsys DesignWare PCIe controller driver:

   - Refactor core initialization code for endpoint mode (Vidya Sagar)

   - Fix endpoint MSI-X to use correct table address (Kishon Vijay
     Abraham I)

  TI DRA7xx PCIe controller driver:

   - Fix MSI IRQ handling (Vignesh Raghavendra)

  TI Keystone PCIe controller driver:

   - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)

  Miscellaneous:

   - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
     Feng)

   - Use ioremap(), not phys_to_virt(), for platform ROM to fix video
     ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"

* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
  misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
  PCI: tegra: Print -EPROBE_DEFER error message at debug level
  misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
  misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
  tools: PCI: Add 'e' to clear IRQ
  misc: pci_endpoint_test: Add ioctl to clear IRQ
  misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
  PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
  PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
  PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
  misc: pci_endpoint_test: Add support to get DMA option from userspace
  tools: PCI: Add 'd' command line option to support DMA
  misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
  PCI: endpoint: functions/pci-epf-test: Print throughput information
  PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
  PCI: pciehp: Fix MSI interrupt race
  PCI: pciehp: Fix indefinite wait on sysfs requests
  PCI: endpoint: Fix clearing start entry in configfs
  PCI: tegra: Add support for PCIe endpoint mode in Tegra194
  PCI: sysfs: Revert "rescan" file renames
  ...

Include originally "late" updates for OMAP and Qualcomm,
now that it's not late any more.

* arm/late: (122 commits)
  ARM: OMAP2+: Drop legacy platform data for ti81xx edma
  ARM: dts: Configure interconnect target module for ti816x edma
  ARM: dts: Configure interconnect target module for dm814x tptc3
  ARM: dts: Configure interconnect target module for dm814x tptc2
  ARM: dts: Configure interconnect target module for dm814x tptc1
  ARM: dts: Configure interconnect target module for dm814x tptc0
  ARM: dts: Configure interconnect target module for dm814x tpcc
  ARM: OMAP2+: Drop legacy platform data for dm814x cpsw
  ARM: dts: Configure interconnect target module for dm814x cpsw
  clk: ti: Fix dm814x clkctrl for ethernet
  arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
  arm64: dts: sdm845: add IPA information
  arm64: dts: qcom: db845c: add analog audio support
  arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
  arm64: dts: qcom: c630: Enable audio support
  arm64: dts: qcom: sdm845: add apr nodes
  arm64: dts: qcom: sdm845: add slimbus nodes
  arm64: dts: qcom: sc7180: Update reg names for SDHC
  arm64: dts: qcom: qcs404: Enable CQE support for eMMC
  arm64: dts: msm8916: Add fastrpc node
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...

Pull SPDX updates from Greg KH:
 "Here are three SPDX patches for 5.7-rc1.

  One fixes up the SPDX tag for a single driver, while the other two go
  through the tree and add SPDX tags for all of the .gitignore files as
  needed.

  Nothing too complex, but you will get a merge conflict with your
  current tree, that should be trivial to handle (one file modified by
  two things, one file deleted.)

  All three of these have been in linux-next for a while, with no
  reported issues other than the merge conflict"

* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  ASoC: MT6660: make spdxcheck.py happy
  .gitignore: add SPDX License Identifier
  .gitignore: remove too obvious comments

Pull xen updates from Juergen Gross:

 - a cleanup patch removing an unused function

 - a small fix for the xen pciback driver

 - a series for making the unwinder hyppay with the Xen PV guest idle
   task stacks

* tag 'for-linus-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: Make the secondary CPU idle tasks reliable
  x86/xen: Make the boot CPU idle task reliable
  xen-pciback: fix INTERRUPT_TYPE_* defines
  xen/xenbus: remove unused xenbus_map_ring()

Pull workqueue updates from Tejun Heo:
 "Nothing too interesting. Just two trivial patches"

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Mark up unlocked access to wq->first_flusher
  workqueue: Make workqueue_init*() return void

Pull cgroup updates from Tejun Heo:

 - Christian extended clone3 so that processes can be spawned into
   cgroups directly.

   This is not only neat in terms of semantics but also avoids grabbing
   the global cgroup_threadgroup_rwsem for migration.

 - Daniel added !root xattr support to cgroupfs.

   Userland already uses xattrs on cgroupfs for bookkeeping. This will
   allow delegated cgroups to support such usages.

 - Prateek tried to make cpuset hotplug handling synchronous but that
   led to possible deadlock scenarios. Reverted.

 - Other minor changes including release_agent_path handling cleanup.

* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: Document the cpuset_v2_mode mount option
  Revert "cpuset: Make cpuset hotplug synchronous"
  cgroupfs: Support user xattrs
  kernfs: Add option to enable user xattrs
  kernfs: Add removed_size out param for simple_xattr_set
  kernfs: kvmalloc xattr value instead of kmalloc
  cgroup: Restructure release_agent_path handling
  selftests/cgroup: add tests for cloning into cgroups
  clone3: allow spawning processes into cgroups
  cgroup: add cgroup_may_write() helper
  cgroup: refactor fork helpers
  cgroup: add cgroup_get_from_file() helper
  cgroup: unify attach permission checking
  cpuset: Make cpuset hotplug synchronous
  cgroup.c: Use built-in RCU list checking
  kselftest/cgroup: add cgroup destruction test
  cgroup: Clean up css_set task traversal

Pull kgdb updates from Daniel Thompson:
 "Pretty quiet this cycle. Just a couple of small fixes from myself both
  of which were reviewed by Doug Anderson to keep me honest (thanks)"

* tag 'kgdb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Censor attempts to set PROMPT without ENABLE_MEM_READ
  kdb: Eliminate strncpy() warnings by replacing with strscpy()

Pull ARM updates from Russell King:

 - replace setup_irq() with request_irq() for ebsa110, footbridge, rpc

 - fix clang assembly error in kexec code

 - remove .fixup section in boot stub

 - decompressor / EFI cache flushing updates

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8966/1: rpc: replace setup_irq() by request_irq()
  ARM: 8965/2: footbridge: replace setup_irq() by request_irq()
  ARM: 8964/1: ebsa110: replace setup_irq() by request_irq()
  ARM: 8962/1: kexec: drop invalid assembly argument
  ARM: decompressor: switch to by-VA cache maintenance for v7 cores
  ARM: decompressor: prepare cache_clean_flush for doing by-VA maintenance
  ARM: decompressor: factor out routine to obtain the inflated image size
  ARM: 8959/1: Remove unused .fixup section in boot stub
  ARM: allow unwinder to unwind recursive functions

When building arm allyesconfig:

drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments
to function call, expected 2, have 3
        timer->timer_ops->set_load(timer->odt, 0, 0);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~                ^
1 error generated.

This is due to commit 02e6d546 ("clocksource/drivers/timer-ti-dm:
Enable autoreload in set_pwm") in the clockevents tree interacting with
commit e28edc57 ("remoteproc/omap: Request a timer(s) for remoteproc
usage") from the rpmsg tree.

This should have been fixed during the merge of the remoteproc tree
since it happened after the clockevents tree merge; however, it does not
look like my email was noticed by either maintainer and I did not pay
attention when the pull was sent since I was on CC.

Fixes: c6570114 ("Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc")
Link: https://lore.kernel.org/lkml/20200327185055.GA22438@ubuntu-m2-xlarge-x86/Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If all the bytes are equal to DISCARD_FILLER, we want to accept the
buffer. If any of the bytes are different, we must do thorough
tag-by-tag checking.

The condition was inverted.

Fixes: 84597a44 ("dm integrity: add optional discard support")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The cpuset in cgroup v1 accepts a special "cpuset_v2_mode" mount
option that make cpuset.cpus and cpuset.mems behave more like those in
cgroup v2.  Document it to make other people more aware of this feature
that can be useful in some circumstances.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This reverts commit effd58c9.

blk_queue_split() is causing excessive IO splitting -- because
blk_max_size_offset() depends on 'chunk_sectors' limit being set and
if it isn't (as is the case for DM targets!) it falls back to
splitting on a 'max_sectors' boundary regardless of offset.

"Fix" this by reverting back to _not_ using blk_queue_split() in
dm_process_bio() for normal IO (reads and writes).  Long-term fix is
still TBD but it should focus on training blk_max_size_offset() to
call into a DM provided hook (to call DM's max_io_len()).

Test results from simple misaligned IO test on 4-way dm-striped device
with chunksize of 128K and stripesize of 512K:

xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev

before this revert:

253,0   21        1     0.000000000  2206  Q   R 224 + 4072 [xfs_io]
253,0   21        2     0.000008267  2206  X   R 224 / 480 [xfs_io]
253,0   21        3     0.000010530  2206  X   R 224 / 256 [xfs_io]
253,0   21        4     0.000027022  2206  X   R 480 / 736 [xfs_io]
253,0   21        5     0.000028751  2206  X   R 480 / 512 [xfs_io]
253,0   21        6     0.000033323  2206  X   R 736 / 992 [xfs_io]
253,0   21        7     0.000035130  2206  X   R 736 / 768 [xfs_io]
253,0   21        8     0.000039146  2206  X   R 992 / 1248 [xfs_io]
253,0   21        9     0.000040734  2206  X   R 992 / 1024 [xfs_io]
253,0   21       10     0.000044694  2206  X   R 1248 / 1504 [xfs_io]
253,0   21       11     0.000046422  2206  X   R 1248 / 1280 [xfs_io]
253,0   21       12     0.000050376  2206  X   R 1504 / 1760 [xfs_io]
253,0   21       13     0.000051974  2206  X   R 1504 / 1536 [xfs_io]
253,0   21       14     0.000055881  2206  X   R 1760 / 2016 [xfs_io]
253,0   21       15     0.000057462  2206  X   R 1760 / 1792 [xfs_io]
253,0   21       16     0.000060999  2206  X   R 2016 / 2272 [xfs_io]
253,0   21       17     0.000062489  2206  X   R 2016 / 2048 [xfs_io]
253,0   21       18     0.000066133  2206  X   R 2272 / 2528 [xfs_io]
253,0   21       19     0.000067507  2206  X   R 2272 / 2304 [xfs_io]
253,0   21       20     0.000071136  2206  X   R 2528 / 2784 [xfs_io]
253,0   21       21     0.000072764  2206  X   R 2528 / 2560 [xfs_io]
253,0   21       22     0.000076185  2206  X   R 2784 / 3040 [xfs_io]
253,0   21       23     0.000077486  2206  X   R 2784 / 2816 [xfs_io]
253,0   21       24     0.000080885  2206  X   R 3040 / 3296 [xfs_io]
253,0   21       25     0.000082316  2206  X   R 3040 / 3072 [xfs_io]
253,0   21       26     0.000085788  2206  X   R 3296 / 3552 [xfs_io]
253,0   21       27     0.000087096  2206  X   R 3296 / 3328 [xfs_io]
253,0   21       28     0.000093469  2206  X   R 3552 / 3808 [xfs_io]
253,0   21       29     0.000095186  2206  X   R 3552 / 3584 [xfs_io]
253,0   21       30     0.000099228  2206  X   R 3808 / 4064 [xfs_io]
253,0   21       31     0.000101062  2206  X   R 3808 / 3840 [xfs_io]
253,0   21       32     0.000104956  2206  X   R 4064 / 4096 [xfs_io]
253,0   21       33     0.001138823     0  C   R 4096 + 200 [0]

after this revert:

253,0   18        1     0.000000000  4430  Q   R 224 + 3896 [xfs_io]
253,0   18        2     0.000018359  4430  X   R 224 / 256 [xfs_io]
253,0   18        3     0.000028898  4430  X   R 256 / 512 [xfs_io]
253,0   18        4     0.000033535  4430  X   R 512 / 768 [xfs_io]
253,0   18        5     0.000065684  4430  X   R 768 / 1024 [xfs_io]
253,0   18        6     0.000091695  4430  X   R 1024 / 1280 [xfs_io]
253,0   18        7     0.000098494  4430  X   R 1280 / 1536 [xfs_io]
253,0   18        8     0.000114069  4430  X   R 1536 / 1792 [xfs_io]
253,0   18        9     0.000129483  4430  X   R 1792 / 2048 [xfs_io]
253,0   18       10     0.000136759  4430  X   R 2048 / 2304 [xfs_io]
253,0   18       11     0.000152412  4430  X   R 2304 / 2560 [xfs_io]
253,0   18       12     0.000160758  4430  X   R 2560 / 2816 [xfs_io]
253,0   18       13     0.000183385  4430  X   R 2816 / 3072 [xfs_io]
253,0   18       14     0.000190797  4430  X   R 3072 / 3328 [xfs_io]
253,0   18       15     0.000197667  4430  X   R 3328 / 3584 [xfs_io]
253,0   18       16     0.000218751  4430  X   R 3584 / 3840 [xfs_io]
253,0   18       17     0.000226005  4430  X   R 3840 / 4096 [xfs_io]
253,0   18       18     0.000250404  4430  Q   R 4120 + 176 [xfs_io]
253,0   18       19     0.000847708     0  C   R 4096 + 24 [0]
253,0   18       20     0.000855783     0  C   R 4120 + 176 [0]

Fixes: effd58c9 ("dm: always call blk_queue_split() in dm_process_bio()")
Cc: stable@vger.kernel.org
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This reverts commit a49e4629 ("cpuset: Make cpuset hotplug synchronous") as
it may deadlock with cpu hotplug path.

Link: http://lkml.kernel.org/r/F0388D99-84D7-453B-9B6B-EEFF0E7BE4CC@lca.pwSigned-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Prateek Sood <prsood@codeaurora.org>

When dumping out the trace data in latency format, a check is made to peek
at the next event to compare its timestamp to the current one, and if the
delta is of a greater size, it will add a marker showing so. But to do this,
it needs to save the current event otherwise peeking at the next event will
remove the current event. To save the event, a temp buffer is used, and if
the event is bigger than the temp buffer, the temp buffer is freed and a
bigger buffer is allocated.

This allocation is a problem when called in atomic context. The only way
this gets called via atomic context is via ftrace_dump(). Thus, use a static
buffer of 128 bytes (which covers most events), and if the event is bigger
than that, simply return NULL. The callers of trace_find_next_entry() need
to handle a NULL case, as that's what would happen if the allocation failed.

Link: https://lore.kernel.org/r/20200326091256.GR11705@shao2-debian

Fixes: ff895103 ("tracing: Save off entry when peeking at next entry")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Otherwise:

In file included from drivers/md/dm-integrity.c:13:
drivers/md/dm-integrity.c: In function 'dm_integrity_status':
drivers/md/dm-integrity.c:3061:10: error: format '%llu' expects
argument of type 'long long unsigned int', but argument 4 has type
'long int' [-Werror=format=]
   DMEMIT("%llu %llu",
          ^~~~~~~~~~~
    atomic64_read(&ic->number_of_mismatches),
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/device-mapper.h:550:46: note: in definition of macro 'DMEMIT'
      0 : scnprintf(result + sz, maxlen - sz, x))
                                              ^
cc1: all warnings being treated as errors

Fixes: 7649194a ("dm integrity: remove sector type casts")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Currently a failed memory allocation will lead to a null pointer
dereference on point wdt.  Fix this by checking for a failed
allocation and just returning.

Addresses-Coverity: ("Dereference null return")
Fixes: fd90d48d ("rtc: ds1307: add support for watchdog timer on ds1388")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200403110437.57420-1-colin.king@canonical.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Pull devicetree updates from Rob Herring:

 - Unit test for overlays with GPIO hogs

 - Improve dma-ranges parsing to handle dma-ranges with multiple entries

 - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9

 - Improve overlay error reporting

 - Device link support for power-domains and hwlocks bindings

 - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida,
   PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and
   ITE Tech

 - Add deprecated Marvell vendor prefix 'mrvl'

 - A bunch of binding conversions to DT schema continues. Of note, the
   common serial and USB connector bindings are converted.

 - Add more Arm CPU compatibles

 - Drop Mark Rutland as DT maintainer :(

* tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits)
  MAINTAINERS: drop an old reference to stm32 pwm timers doc
  MAINTAINERS: dt: update etnaviv file reference
  dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb
  dt-bindings: uniphier-system-bus: fix warning in the example
  dt-bindings: display: meson-vpu: fix indentation of reg-names' "items"
  dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints
  dt-bindings: power: Fix example for power-domain
  dt-bindings: arm: Add some constraints for PSCI nodes
  of: some unittest overlays not untracked
  of: gpio unittest kfree() wrong object
  dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml
  dt-bindings: serial: sh-sci: Convert to json-schema
  dt-bindings: serial: Document serialN aliases
  dt-bindings: thermal: tsens: Set 'additionalProperties: false'
  dt-bindings: thermal: tsens: Fix nvmem-cell-names schema
  dt-bindings: vendor-prefixes: Add Beacon vendor prefix
  dt-bindings: vendor-prefixes: Add Topwise
  of: of_private.h: Replace zero-length array with flexible-array member
  docs: dt: fix a broken reference to input.yaml
  docs: dt: fix references to ap806-system-controller.txt
  ...

Pull SCSI updates from James Bottomley:
 "This series has a huge amount of churn because it pulls in Mauro's doc
  update changing all our txt files to rst ones.

  Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
  zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
  some other minor updates.

  The major core change is Hannes moving functions out of the aacraid
  driver and into the core"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
  scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
  scsi: ufs: Do not rely on prefetched data
  scsi: dc395x: remove dc395x_bios_param
  scsi: libiscsi: Fix error count for active session
  scsi: hpsa: correct race condition in offload enabled
  scsi: message: fusion: Replace zero-length array with flexible-array member
  scsi: qedi: Add PCI shutdown handler support
  scsi: qedi: Add MFW error recovery process
  scsi: ufs: Enable block layer runtime PM for well-known logical units
  scsi: ufs-qcom: Override devfreq parameters
  scsi: ufshcd: Let vendor override devfreq parameters
  scsi: ufshcd: Update the set frequency to devfreq
  scsi: ufs: Resume ufs host before accessing ufs device
  scsi: ufs-mediatek: customize the delay for enabling host
  scsi: ufs: make HCE polling more compact to improve initialization latency
  scsi: ufs: allow custom delay prior to host enabling
  scsi: ufs-mediatek: use common delay function
  scsi: ufs: introduce common and flexible delay function
  scsi: ufs: use an enum for host capabilities
  scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  ...

Pull MTD updates from Miquel Raynal:
 "MTD core changes:
   - Fix issue where write_cached_data() fails but write() still returns
     success

   - maps: sa1100-flash: Replace zero-length array with flexible-array
     member

   - phram: Fix a double free issue in error path

   - Convert fallthrough comments into statements

   - MAINTAINERS: Add the IRC channel to the MTD related subsystems

  Raw NAND core changes:
   - Add support for manufacturer specific suspend/resume operation

   - Add support for manufacturer specific lock/unlock operation

   - Replace zero-length array with flexible-array member

   - Fix a typo ("manufecturer")

   - Ensure nand_soft_waitrdy wait period is enough

  Raw NAND controller driver changes:
   - Brcmnand:
       * Add support for flash-edu for dma transfers (+ bindings)

   - Cadence:
       * Reinit completion before executing a new command
       * Change bad block marker size
       * Fix the calculation of the avaialble OOB size
       * Get meta data size from registers

   - Qualcom:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release resources on failure within qcom_nandc_alloc()

   - Allwinner:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Marvell:
       * Use dma_request_chan() instead dma_request_slave_channel()
       * Release DMA channel on error

   - Freescale:
       * Use dma_request_chan() instead dma_request_slave_channel()

   - Macronix:
       * Add support for Macronix NAND randomizer (+ bindings)

   - Ams-delta:
       * Rename structures and functions to gpio_nand*
       * Make the driver custom I/O ready
       * Drop useless local variable
       * Support custom driver initialisation
       * Add module device tables
       * Handle more GPIO pins as optional
       * Make read pulses optional
       * Don't hardcode read/write pulse widths
       * Push inversion handling to gpiolib
       * Enable OF partition info support
       * Drop board specific partition info
       * Use struct gpio_nand_platdata
       * Write protect device during probe

   - Ingenic:
       * Use devm_platform_ioremap_resource()
       * Add dependency on MIPS || COMPILE_TEST

   - Denali:
       * Deassert write protect pin

   - ST:
       * Use dma_request_chan() instead dma_request_slave_channel()

  Raw NAND chip driver changes:
   - Toshiba:
       * Support reading the number of bitflips for BENAND (Built-in ECC NAND)

   - Macronix:
       * Add support for deep power down mode
       * Add support for block protection

  SPI-NAND core changes:
   - Do not erase the block before writing a bad block marker

   - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB

   - Stop using spinand->oobbuf for buffering bad block markers

   - Rework detect procedure for different READ_ID operation

  SPI-NAND driver changes:
   - Toshiba:
       * Support for new Kioxia Serial NAND
       * Rename function name to change suffix and prefix (8Gbit)
       * Add comment about Kioxia ID

   - Micron:
       * Add new Micron SPI NAND devices with multiple dies
       * Add M70A series Micron SPI NAND devices
       * identify SPI NAND device with Continuous Read mode
       * Add new Micron SPI NAND devices
       * Describe the SPI NAND device MT29F2G01ABAGD
       * Generalize the OOB layout structure and function names

  SPI NOR core changes:
   - Move all the manufacturer specific quirks/code out of the core, to
     make the core logic more readable and thus ease maintenance.

   - Move the SFDP logic out of the core, it provides a better
     separation between the SFDP parsing and core logic.

   - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers
     must not be able to use structures that are meant just for the SPI
     NOR core.

   - Use the spi-mem direct mapping API to let advanced controllers
     optimize the read/write operations when they support direct
     mapping.

   - Add generic formula for the Status Register block protection
     handling. It fixes some long standing locking limitations and eases
     the addition of the 4bit block protection support.

   - Add block protection support for flashes with 4 block protection
     bits in the Status Register.

  SPI NOR controller drivers changes:
   - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor
     driver.

   - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts.

  HyperBus changes:
   - Print error msg when compatible is wrong or missing

   - Move mapping of direct access window from core to individual
     drivers"

* tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits)
  mtd: Convert fallthrough comments into statements
  mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND)
  MAINTAINERS: Add the IRC channel to the MTD related subsystems
  mtd: Fix issue where write_cached_data() fails but write() still returns success
  mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member
  mtd: phram: fix a double free issue in error path
  mtd: spinand: toshiba: Support for new Kioxia Serial NAND
  mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)
  mtd: rawnand: macronix: Add support for deep power down mode
  mtd: rawnand: Add support for manufacturer specific suspend/resume operation
  mtd: spi-nor: Enable locking for n25q512ax3/n25q512a
  mtd: spi-nor: Add SR 4bit block protection support
  mtd: spi-nor: Add generic formula for SR block protection handling
  mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size
  mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member
  mtd: spi-nor: Clear WEL bit when erase or program errors occur
  MAINTAINERS: update entry after SPI NOR controller move
  mtd: spi-nor: Trim what is exposed in spi-nor.h
  mtd: spi-nor: Drop the MFR definitions
  mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table
  ...

Huge page-table entries for TTM

In order to reduce CPU usage [1] and in theory TLB misses this patchset enables
huge- and giant page-table entries for TTM and TTM-enabled graphics drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom (VMware) <thomas_os@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325073102.6129-1-thomas_os@shipmail.org

Pull dmaengine updates from Vinod Koul:
 "Core:
   - Some code cleanup and optimization in core by Andy

   - Debugfs support for displaying dmaengine channels by Peter

  Drivers:
   - New driver for uniphier-xdmac controller

   - Updates to stm32 dma, mdma and dmamux drivers and PM support

   - More updates to idxd drivers

   - Bunch of changes in tegra-apb driver and cleaning up of pm
     functions

   - Bunch of spelling fixes and Replace zero-length array patches

   - Shutdown hook for fsl-dpaa2-qdma driver

   - Support for interleaved transfers for ti-edma and virtualization
     support for k3-dma driver

   - Support for reset and updates in xilinx_dma driver

   - Improvements and locking updates in at_hdma driver"

* tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
  dt-bindings: dma: renesas,usb-dmac: add r8a77961 support
  dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq
  dmaengine: tegra-apb: Improve DMA synchronization
  dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler
  dmaengine: tegra-apb: mark PM functions as __maybe_unused
  dmaengine: fix spelling mistake "exceds" -> "exceeds"
  dmaengine: sprd: Set request pending flag when DMA controller is active
  dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow
  dmaengine: idxd: remove global token limit check
  dmaengine: idxd: reflect shadow copy of traffic class programming
  dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc
  dmaengine: Create debug directories for DMA devices
  dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs
  dmaengine: Add basic debugfs support
  dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma'
  dmaengine: ti: edma: fix null dereference because of a typo in pointer name
  dmaengine: fsl-dpaa2-qdma: Adding shutdown hook
  dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver
  dt-bindings: dmaengine: Add UniPhier external DMA controller bindings
  dmaengine: ti: k3-udma: Implement support for atype (for virtualization)
  ...

Pull i2c updates from Wolfram Sang:
 "I2C has:

   - using defines for bus speeds to avoid mistakes in hardcoded values;
     lots of small driver updates because of that. Thanks, Andy!

   - API change: i2c_setup_smbus_alert() was renamed to
     i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree
     users have been converted

   - in the core, a rare race condition when deleting the cdev has been
     fixed. Thanks, Kevin!

   - lots of driver updates. Thanks, everyone!

  I also want to mention: The amount of review and testing tags given
  was quite high this time. Thank you to these people, too. I hope we
  can keep it like this!"

* 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c: rcar: clean up after refactoring i2c_timings
  macintosh: convert to i2c_new_scanned_device
  i2c: drivers: Use generic definitions for bus frequencies
  i2c: algo: Use generic definitions for bus frequencies
  i2c: stm32f7: switch to I²C generic property parsing
  i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
  i2c: core: Allow override timing properties with 0
  i2c: core: Provide generic definitions for bus frequencies
  i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()
  i2c: imx: remove duplicate print after platform_get_irq()
  i2c: designware: Fix spelling typos in the comments
  i2c: designware: Discard i2c_dw_read_comp_param() function
  i2c: designware: Detect the FIFO size in the common code
  i2c: dev: Fix the race between the release of i2c_dev and cdev
  i2c: qcom-geni: Drop of_platform.h include
  i2c: qcom-geni: Grow a dev pointer to simplify code
  i2c: qcom-geni: Let firmware specify irq trigger flags
  i2c: stm32f7: do not backup read-only PECR register
  i2c: smbus: remove outdated references to irq level triggers
  i2c: convert SMBus alert setup function to return an ERRPTR
  ...