New architectures currently have to provide implementations of 5 different
functions: xen_arch_pre_suspend(), xen_arch_post_suspend(),
xen_arch_hvm_post_suspend(), xen_mm_pin_all(), and xen_mm_unpin_all().

Refactor the suspend code to only require xen_arch_pre_suspend() and
xen_arch_post_suspend().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

"arm: xen: implement multicall hypercall support." forgot to do this.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>

virt_to_pfn has been defined in arch/arm/include/asm/memory.h by commit
e26a9e00 "ARM: Better virt_to_page() handling" and Xen has come to rely
on it.  Introduce virt_to_pfn on arm64 too.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

virt_to_pfn has been defined in asm/memory.h by the commit e26a9e00 "ARM: Better
virt_to_page() handling"

This will result of a compilation warning when CONFIG_XEN is enabled.

arch/arm/include/asm/xen/page.h:80:0: warning: "virt_to_pfn" redefined [enabled by default]
 #define virt_to_pfn(v)          (PFN_DOWN(__pa(v)))
 ^
In file included from arch/arm/include/asm/page.h:163:0,
                 from arch/arm/include/asm/xen/page.h:4,
                 from include/xen/page.h:4,
                 from arch/arm/xen/grant-table.c:33:

The definition in memory.h is nearly the same (it directly expand PFN_DOWN),
so we can safely drop virt_to_pfn in xen include.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

As part of this make the usual change to xen_ulong_t in place of unsigned long.
This change has no impact on x86.

The Linux definition of struct multicall_entry.result differs from the Xen
definition, I think for good reasons, and used a long rather than an unsigned
long. Therefore introduce a xen_long_t, which is a long on x86 architectures
and a signed 64-bit integer on ARM.

Use uint32_t nr_calls on x86 for consistency with the ARM definition.

Build tested on amd64 and i386 builds. Runtime tested on ARM.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Pull input updates from Dmitry Torokhov:
 "The main change is that we now publish "firmware ID" for the serio
  devices to help userspace figure out the kind of touchpads it is
  dealing with: i8042 will export PS/2 port's PNP IDs as firmware IDs.

  You will also get more quirks for Synaptics touchpads in various
  Lenovo laptops, a change to elantech driver to recognize even more
  models, and fixups to wacom and couple other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - add support for newer elantech touchpads
  Input: soc_button_array - fix a crash during rmmod
  Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1
  Input: synaptics - report INPUT_PROP_TOPBUTTONPAD property
  Input: Add INPUT_PROP_TOPBUTTONPAD device property
  Input: i8042 - add firmware_id support
  Input: serio - add firmware_id sysfs attribute
  Input: wacom - handle 1024 pressure levels in wacom_tpc_pen
  Input: wacom - references to 'wacom->data' should use 'unsigned char*'
  Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSURE
  Input: wacom - use full 32-bit HID Usage value in switch statement
  Input: wacom - missed the last bit of expresskey for DTU-1031
  Input: ads7846 - fix device usage within attribute show
  Input: da9055_onkey - remove use of regmap_irq_get_virq()

Pull radeon drm fixes from Dave Airlie:
 "This is just radeon fixes, primarily the two pll fix and the aux fix,
  it also disables dpm on rv770 gpus, fixes driver reloading, and fixes
  two issues with runtime PM on some GPUS"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: don't allow runpm=1 on systems with out ATPX
  drm/radeon: fix ATPX detection on non-VGA GPUs
  drm/radeon/pm: don't walk the crtc list before it has been initialized (v2)
  drm/radeon: properly unregister hwmon interface (v2)
  drm/radeon: fix count in cik_sdma_ring_test()
  drm/radeon/aux: fix hpd assignment for aux bus
  drm/radeon: improve PLL limit handling in post div calculation
  drm/radeon: use fixed PPL ref divider if needed
  drm/radeon: disable dpm on rv770 by default

Newer elantech touchpads are not recognized by the current driver, since it
fails to detect their firmware version number. This prevents more advanced
touchpad features from being usable such as two-finger scrolling. This
patch allows newer touchpads to be detected and be fully functional. Tested
on Sony Vaio SVF13N17PXB.
Signed-off-by: Jordan Rife <jrife0@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When the system has zero or one button available, trying to rmmod
soc_button_array will cause crash. Fix this by properly handling -ENODEV
in probe().
Signed-off-by: Lejun Zhu <lejun.zhu@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1. Further PLL parameter fixes.
2. Fixes for HPD on DP
3. Could of different PM fixes
4. Disabling DPM on RV770

* 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux:
  drm/radeon: don't allow runpm=1 on systems with out ATPX
  drm/radeon: fix ATPX detection on non-VGA GPUs
  drm/radeon/pm: don't walk the crtc list before it has been initialized (v2)
  drm/radeon: properly unregister hwmon interface (v2)
  drm/radeon: fix count in cik_sdma_ring_test()
  drm/radeon/aux: fix hpd assignment for aux bus
  drm/radeon: improve PLL limit handling in post div calculation
  drm/radeon: use fixed PPL ref divider if needed
  drm/radeon: disable dpm on rv770 by default

fixup_user_fault() is used by the futex code when the direct user access
fails, and the futex code wants it to either map in the page in a usable
form or return an error.  It relied on handle_mm_fault() to map the
page, and correctly checked the error return from that, but while that
does map the page, it doesn't actually guarantee that the page will be
mapped with sufficient permissions to be then accessed.

So do the appropriate tests of the vma access rights by hand.

[ Side note: arguably handle_mm_fault() could just do that itself, but
  we have traditionally done it in the caller, because some callers -
  notably get_user_pages() - have been able to access pages even when
  they are mapped with PROT_NONE.  Maybe we should re-visit that design
  decision, but in the meantime this is the minimal patch. ]

Found by Dave Jones running his trinity tool.
Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull gpio fixes from Linus Walleij:
 "A small batch of GPIO fixes for the v3.15 series.  I expect more to
  come in but I'm a bit behind on mail, might as well get these to you
  right now:

   - Change a crucial semantic ordering in the GPIO irqchip helpers

   - Fix two nasty regressions in the ACPI gpiolib extensions"

* tag 'gpio-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio / ACPI: Prevent potential wrap of GPIO value on OpRegion read
  gpio / ACPI: Don't crash on NULL chip->dev
  gpio: set data first, then chip and handler

Pull x86 vdso fix from Peter Anvin:
 "This is a single build fix for building with gold as opposed to GNU
  ld.  It got queued up separately and was expected to be pushed during
  the merge window, but it got left behind"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso: Make the vdso linker script compatible with Gold

vgaswitcheroo and the ATPX ACPI methods are required to
power down the dGPU.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73901Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Some newer PX laptops have the pci device class
set to DISPLAY_OTHER rather than DISPLAY_VGA.  This
properly detects ATPX on those laptops.

Based on a patch from: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Cc: airlied@gmail.com

Avoids a crash in certain cases when thermal irqs are generated
before the display structures have been initialized.

v2: fix the vblank and vrefresh helpers as well

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73931Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to properly unregister the hwmon device on driver
unload.

v2: minor clean up

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=73931Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Should be 5 rather than 4.
Noticed-by: Mathias Fröhlich <Mathias.Froehlich@gmx.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian König <christian.koenig@amd.com>

The hpd (hot plug detect) pin assignment got lost
in the conversion to to the common i2c over aux
code.  Without this information, aux transactions
do not work properly.  Fixes DP failures.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

Pull UML fixes from Richard Weinberger:
 "Assorted fixes for UML"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Memory corruption on startup
  um: Missing pipe handling
  uml: Simplify tempdir logic.

Pull ext4 fixes from Ted Ts'o:
 "These are regression and bug fixes for ext4.

  We had a number of new features in ext4 during this merge window
  (ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
  there were many more regression and bug fixes this time around.  It
  didn't help that xfstests hadn't been fully updated to fully stress
  test COLLAPSE_RANGE until after -rc1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
  ext4: disable COLLAPSE_RANGE for bigalloc
  ext4: fix COLLAPSE_RANGE failure with 1KB block size
  ext4: use EINVAL if not a regular file in ext4_collapse_range()
  ext4: enforce we are operating on a regular file in ext4_zero_range()
  ext4: fix extent merging in ext4_ext_shift_path_extents()
  ext4: discard preallocations after removing space
  ext4: no need to truncate pagecache twice in collapse range
  ext4: fix removing status extents in ext4_collapse_range()
  ext4: use filemap_write_and_wait_range() correctly in collapse range
  ext4: use truncate_pagecache() in collapse range
  ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE
  ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabled
  ext4: always check ext4_ext_find_extent result
  ext4: fix error handling in ext4_ext_shift_extents
  ext4: silence sparse check warning for function ext4_trim_extent
  ext4: COLLAPSE_RANGE only works on extent-based files
  ext4: fix byte order problems introduced by the COLLAPSE_RANGE patches
  ext4: use i_size_read in ext4_unaligned_aio()
  fs: disallow all fallocate operation on active swapfile
  fs: move falloc collapse range check into the filesystem methods
  ...

The reverse case of this race (you must msync before read) is
well known. This is the not so common one.

It can be triggered only on systems which do a lot of task
switching and only at UML startup. If you are starting 200+ UMLs
~ 0.5% will always die without this fix.
Signed-off-by: Anton Ivanov <antivano@cisco.com>
[rw: minor whitespace fixes]
Signed-off-by: Richard Weinberger <richard@nod.at>

UML does not handle sigpipe. As a result when running it under
expect or redirecting the IO from the console to an external program
it will crash if the program stops or exits.
Signed-off-by: Anton Ivanov <antivano@cisco.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Inferring the mount hierarchy correctly from /proc/mounts is hard when MS_MOVE
may have been used, and the previous code did it wrongly. This change simplifies
the logic to only require that /dev/shm be _on_ tmpfs (which can be checked
trivially with statfs) rather than that it be a _mountpoint_ of tmpfs, since
there isn't a compelling reason to be that strict. We also now check for tmpfs
on whatever directory we ultimately use so that the user is better informed.

This change also moves the more standard TMPDIR environment variable check ahead
of the others.

Applies to 3.12.
Signed-off-by: Tristan Schmelcher <tschmelcher@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>

Pull slave-dmaengine fixes from Vinod Koul:
 "Back from long weekend here in India and now the time to send fixes
  for slave dmaengine.
   - Dan's fix of sirf xlate code
   - Jean's fix for timberland
   - edma fixes by Sekhar for SG handling and Yuan for changing init
     call"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: fix eDMA driver as a subsys_initcall
  dmaengine: sirf: off by one in of_dma_sirfsoc_xlate()
  platform: Fix timberdale dependencies
  dma: edma: fix incorrect SG list handling

Pull iommu fixes from Joerg Roedel:
 "Fixes for regressions:

   - fix wrong IOMMU enumeration causing some SCSI device drivers
     initialization failures
   - ARM-SMMU fixes for a panic condition and a wrong return value"

* tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte
  iommu/arm-smmu: Return 0 on unmap failure
  iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors
  iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges
  iommu/vt-d: fix memory leakage caused by commit ea8ea460

Pull perf tooling fixes from Ingo Molnar:
 "Three small tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Improve error reporting
  perf tools: Adjust symbols in VDSO
  perf kvm: Fix 'Min time' counting in report command

This improves the PLL parameters when we work at
the limits of the allowed ranges.
Signed-off-by: Christian König <christian.koenig@amd.com>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent

Pull perf/urgent fixes from Jiri Olsa:

User visible changes:

  * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev)

  * Improve error reporting for record session failure (Adrien BAK)

  * Fix 'Min time' counting in report command (Alexander Yarygin)
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

We expect that all the Haswell series will need such quirks, sigh.

The T431s seems to be T430 hardware in a T440s case, using the T440s touchpad,
with the same min/max issue.

The X1 Carbon 3rd generation name says 2nd while it is a 3rd generation.

The X1 and T431s share a PnPID with the T540p, but the reported ranges are
closer to those of the T440s.

HdG: Squashed 5 quirk patches into one. T431s + L440 + L540 are written by me,
S1 Yoga and X1 are written by Benjamin Tissoires.

Hdg: Standardized S1 Yoga and X1 values, Yoga uses the same touchpad as the
X240, X1 uses the same touchpad as the T440.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Check PNP ID of the PS/2 AUX port and report INPUT_PROP_TOPBUTTONPAD
property for for touchpads with top button areas.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On some newer laptops with a trackpoint the physical buttons for the
trackpoint have been removed to allow for a larger touchpad. On these
laptops the buttonpad has clearly marked areas on the top which are to be
used as trackpad buttons.

Users of the event device-node need to know about this, so that they can
properly interpret BTN_LEFT events as being a left / right / middle click
depending on where on the button pad the clicking finger is.

This commits adds a INPUT_PROP_TOPBUTTONPAD device property which drivers
for such buttonpads will use to signal to the user that this buttonpad not
only has the normal bottom button area, but also a top button area.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fill in the new serio firmware_id sysfs attribute for pnp instantiated
8042 serio ports.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

serio devices exposed via platform firmware interfaces such as ACPI may
provide additional identifying information of use to userspace.

We don't associate the serio devices with the firmware device (we don't
set it as parent), so there's no way for userspace to make use of this
information.

We cannot change the parent for serio devices instantiated though a
firmware interface as that would break suspend / resume ordering.

Therefore this patch adds a new firmware_id sysfs attribute so that
userspace can get a string from there with any additional identifying
information the firmware interface may provide.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In the current version, when using perf record, if something goes
wrong in tools/perf/builtin-record.c:375
  session = perf_session__new(file, false, NULL);

The error message:
"Not enough memory for reading per file header"

is issued. This error message seems to be outdated and is not very
helpful. This patch proposes to replace this error message by
"Perf session creation failed"

I believe this issue has been brought to lkml:
https://lkml.org/lkml/2014/2/24/458
although this patch only tackles a (small) part of the issue.

Additionnaly, this patch improves error reporting in
tools/perf/util/data.c open_file_write.

Currently, if the call to open fails, the user is unaware of it.
This patch logs the error, before returning the error code to
the caller.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Adrien BAK <adrien.bak@metascale.org>
Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast
[ Reorganize the changelog into paragraphs ]
[ Added empty line after fd declaration in open_file_write ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>

pert-report doesn't resolve function names in VDSO:

$ perf report --stdio -g flat,0.0,15,callee --sort pid
...
            8.76%
               0x7fff6b1fe861
               __gettimeofday
               ACE_OS::gettimeofday()
...

In this case symbol values should be adjusted the same way as for executables,
relocatable objects and prelinked libraries.

After fix:

$ perf report --stdio -g flat,0.0,15,callee --sort pid
...
            8.76%
               __vdso_gettimeofday
               __gettimeofday
               ACE_OS::gettimeofday()
Signed-off-by: Vladimir Nikulichev <nvs@tbricks.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by: Jiri Olsa <jolsa@redhat.com>

Every event in the perf-kvm has a 'stats' structure, which contains
max/min/average/etc times of handling this event.
The problem is that the 'perf-kvm stat report' command always shows
that 'min time' is 0us for every event. Example:

 # perf kvm stat report

 Analyze events for all VCPUs:

    VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
  [..]
  0xB2 MSCH         12     0.07%     0.00%        0us        8us 7.31us ( +-   2.11% )
  0xB2 CHSC         12     0.07%     0.00%        0us       18us 9.39us ( +-   9.49% )
  0xB2 STPX          8     0.05%     0.00%        0us        2us 1.88us ( +-   7.18% )
  0xB2 STSI          7     0.04%     0.00%        0us       44us 16.49us ( +-  38.20% )
  [..]

This happens because the 'stats' structure is not initialized and
stats->min equals to 0. Lets initialize the structure for every
event after its allocation using init_stats() function. This initializes
stats->min to -1 and makes 'Min time' statistics counting work:

 # perf kvm stat report

 Analyze events for all VCPUs:

    VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
  [..]
  0xB2 MSCH         12     0.07%     0.00%        6us        8us 7.31us ( +-   2.11% )
  0xB2 CHSC         12     0.07%     0.00%        7us       18us 9.39us ( +-   9.49% )
  0xB2 STPX          8     0.05%     0.00%        1us        2us 1.88us ( +-   7.18% )
  0xB2 STSI          7     0.04%     0.00%        1us       44us 16.49us ( +-  38.20% )
  [..]
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com
[ Fixing the perf examples changelog output ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>

Some tablet PC sensors (e.g. the 0xEC found in the Thinkpad Yoga) report
more than 256 pressure levels and will experience wraparound unless the
full range is read.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

'wacom->data' contains raw binary data and can lead to unexpected behavior
if a byte under examination happens to have its MSB set.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com>
Reviewed-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>