- 09 May, 2018 1 commit
-
-
Wei Yongjun authored
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 05 May, 2018 6 commits
-
-
Kuninori Morimoto authored
Now we can replace Codec to Component. Let's do it. Note: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 0 -> .idle_bias_on = 1 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
oder_chiou@realtek.com authored
The patch optimizes the power consumption. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 May, 2018 6 commits
-
-
Jean-Jacques Hiblot authored
The TAS6424 incorporates both DC-load and AC-load diagnostics which are used to determine the status of the load. The DC diagnostics runs when any channel is directed to leave the Hi-Z state and enter the MUTE or PLAY state. The DC diagnostics are turned on by default but, if a fast startup without diagnostics is required, the diagnostics can be disabled using a dedicated ALSA control. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
John Hsu authored
Organize the paths of the mixer, "Input Boost Stage", including the routes of the mixer. The control is not used correctly before. Besides, the driver changes the name of the mixer controls. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 01 May, 2018 8 commits
-
-
Mark Brown authored
conflict between a fix and new development in mtk
-
Jerome Brunet authored
At the moment playback_active and capture_active are using only 1 bit so the maximum active count is 1. However, snd_soc_runtime_activate() may be called several time on the same dai. This happens when a dai is part of several dai_links. It is often the case for "snd-soc-dummy-dai". This is a problem if snd_soc_runtime_activate() is called an even number of times on a dai. In this case the active count overflow back to 0. As consequence, ASoC functions, such as soc_dpcm_runtime_update(), won't run correctly. Storing these usage counts on plain 'unsigned int' solves the problem. Fixes: f0fba2ad ("ASoC: multi-component - ASoC Multi-Component Support") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Alexander Sverdlin authored
According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData registers actually have different format. The only currently used bit (Left_Right_Justify) has different position. Fix this and simplify the whole setup taking into account the fact that both registers have zero default value. The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J support (currently unused). Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
Alexander Sverdlin authored
The bit responsible for LRCLK polarity is i2s_tlrs (0), not i2s_trel (2) (refer to "EP93xx User's Guide"). Previously card drivers which specified SND_SOC_DAIFMT_NB_IF actually got SND_SOC_DAIFMT_NB_NF, an adaptation is necessary to retain the old behavior. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ryder Lee authored
For the sake of uniformity, this patch adds a callback mt2701_afe_pcm_probe() in mt2701_afe_pcm_dai_component to retrieve the regmap - the canonical way to obtain the pointer.. Doing so, we could switch to use devm_snd_soc_register_component() to register the component driver. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
Hard-coded setups conflict with topology defined ones. Move this code to codec_fixup so that SOF can override codec dai settings, e.g. to only use 2 channels. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kai Chieh Chuang authored
avoid using snd_soc_platform, which is removed after 4.18 Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 27 Apr, 2018 15 commits
-
-
Jean-Jacques Hiblot authored
mute can be connected to GPIO. In that case we have to drive it to the correct value Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jean-Jacques Hiblot authored
The standby pin can be connected to a GPIO. In that case we have to drive it to the correct values for the TAS6424 to operate properly. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
For devices implemented as a MFD it is common to only have a single node in devicetree representing the whole device. As such when looking up codec_conf mappings we should match against both the devices of_node and the devices parent's of_node, as is already done for DAIs and platform components. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kai Chieh Chuang authored
preallocate pages should use platform device, since we set dma mask for platform device. Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
Kai Chieh Chuang authored
preallocate pages should use platform device, since we set dma mask for platform device. Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jarkko Nikula authored
Commit e9f5f1e4 ("ARM: OMAP2+: Remove legacy mux code") removed CONFIG_OMAP_MUX making impossible to build Nokia N810 audio support. Remove this dependency so we can do at least build tests. Fixes: e9f5f1e4 ("ARM: OMAP2+: Remove legacy mux code") Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
The bias for the analog HS microphone is coming from Retu/Vilma chip and we do not have control over it, yet. For clarity, add a new DAPM_MIC widget for the HS mic and document the current state. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
-
Peter Ujfalusi authored
The non DT boot is no longer supported and when booting with DT the device names are different. Fix them up for now, but the n810.c should be updated to support probing via DT with proper bindings. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Peter Ujfalusi authored
Fix the capture DAPM route due to core changes regarding to mic bias. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kai Chieh Chuang authored
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kai Chieh Chuang authored
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kai Chieh Chuang authored
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kai Chieh Chuang authored
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Katsuhiro Suzuki authored
This patch removes boilerplate of GPLv2, use only SPDX identifier as same as other recently ASoC DAI drivers. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 26 Apr, 2018 4 commits
-
-
Fabio Estevam authored
Convert the sisr and sisr2 variable types to u32 to avoid the following sparse warnings: sound/soc/fsl/fsl_ssi.c:391:42: warning: incorrect type in argument 3 (different base types) sound/soc/fsl/fsl_ssi.c:391:42: expected unsigned int *val sound/soc/fsl/fsl_ssi.c:391:42: got restricted __be32 *<noident> sound/soc/fsl/fsl_ssi.c:393:17: warning: restricted __be32 degrades to integer sound/soc/fsl/fsl_ssi.c:393:15: warning: incorrect type in assignment (different base types) sound/soc/fsl/fsl_ssi.c:393:15: expected restricted __be32 [usertype] sisr2 sound/soc/fsl/fsl_ssi.c:393:15: got unsigned int sound/soc/fsl/fsl_ssi.c:396:50: warning: incorrect type in argument 3 (different base types) sound/soc/fsl/fsl_ssi.c:396:50: expected unsigned int [unsigned] val sound/soc/fsl/fsl_ssi.c:396:50: got restricted __be32 [usertype] sisr2 sound/soc/fsl/fsl_ssi.c:398:42: warning: incorrect type in argument 2 (different base types) sound/soc/fsl/fsl_ssi.c:398:42: expected unsigned int [unsigned] [usertype] sisr sound/soc/fsl/fsl_ssi.c:398:42: got restricted __be32 [addressable] [usertype] sisr In other places where regmap_read() is used a u32 variable is passed to store the register read value, so do the same here as well. regmap API already takes care of endianness, so the usage of u32 is safe. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mukunda, Vijendar authored
In order to make audio_substream_data structure variable consistent throughout the code, changed the name from audio_config to rtd wherever applicable. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ryder Lee authored
Add SPDX identifiers to all remaining files in sound/soc/mediatek/ Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ryder Lee authored
Add support for MT7622 AFE which shares the same binding with MT2701. Cc: devicetree@vger.kernel.org Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-