- 16 Oct, 2008 40 commits
-
-
Yinghai Lu authored
when SPARSE_IRQ is not used, should still use irq_desc->lock Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Jack Steiner authored
Fix problem caused by reordering of the calls to uv_cpu_init() & uv_system_init. Originally, uv_cpu_init() was called AFTER uv_system_init. This order was recently broken as a side-effect of other patches. With this patch, initialization of cpu 0 is now done by the system_init call. Signed-off-by:
Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Cyrill Gorcunov authored
Interrupt remapping could lead to NULL dereference in case of kzalloc failed and memory leak in other way. So fix the both cases. Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Andrew Morton authored
caused by commit a532e19680ada3b8579b81e67e76d3ebd19c340f Author: Yinghai Lu <yhlu.kernel@gmail.com> Date: Wed Aug 20 20:46:25 2008 -0700 x86: sparse_irq needs spin_lock in allocations Signed-off-by:Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Yinghai Lu authored
Signed-off-by:
-
Yinghai Lu authored
Steven Noonan reported a boot hang when using irqpoll and CONFIG_HAVE_SPARSE_IRQ=y. The irqpoll loop needs to be updated to not iterate from 1 to nr_irqs but to iterate via for_each_irq_desc(). (in the former case desc can be NULL which crashes the box) Reported-by:
Steven Noonan <steven@uplinklabs.net> Tested-by:
-
Cyrill Gorcunov authored
Yinghai Lu reported: | > 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 | > IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) | > 8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected | > 9-0 9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15 | > 9-16 9-17 9-18 9-19 9-20 9-21 9-22 9-23 (apicid-pin) not connected | > | | only first one not connected at first, and ... here is a quick fix for this. Signed-off-by:
-
Cyrill Gorcunov authored
If we don't have CONFIG_X86_PM_TIMER=y compiler warns about unused variables. Move PM timer based calibration into a separate function and make the code cleaner and the compiler happy as well. Signed-off-by:
-
Cyrill Gorcunov authored
On 82489DX we don't have ESR register so we should not write it. Signed-off-by:
-
Cyrill Gorcunov authored
lapic_setup_esr doesn't handle esr_disable inquire. The error brought in during unification process. Fix it. Signed-off-by:
-
Yinghai Lu authored
... and tidy up the printouts. Suggested by Andrew Morton. Signed-off-by:
-
Yinghai Lu authored
Signed-off-by:
-
Cyrill Gorcunov authored
Replace __DO_ACTION macro with io_apic_modify_irq function. This allow us to 'grep' definitions being hided by __DO_ACTION macro: __unmask_IO_APIC_irq __mask_IO_APIC_irq __mask_and_edge_IO_APIC_irq __unmask_and_level_IO_APIC_irq Signed-off-by:
-
Steven Noonan authored
Added dummy function for hpet_setup_msi_irq(). Signed-off-by:
-
Venki Pallipadi authored
On Sat, Sep 06, 2008 at 06:03:53AM -0700, Ingo Molnar wrote: > > it crashes two testsystems, the fault on a NULL pointer in hpet init, > with: > > initcall print_all_ICs+0x0/0x520 returned 0 after 26 msecs > calling hpet_late_init+0x0/0x1c0 > BUG: unable to handle kernel NULL pointer dereference at 000000000000008c > IP: [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0 > PGD 0 > Oops: 0000 [1] SMP > CPU 0 > Modules linked in: > Pid: 1, comm: swapper Not tainted 2.6.27-rc5 #29725 > RIP: 0010:[<ffffffff80d228be>] [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0 > RSP: 0018:ffff88003fa07dd0 EFLAGS: 00010246 > RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 > RDX: ffffc20000000160 RSI: 0000000000000000 RDI: 0000000000000003 > RBP: ffff88003fa07e90 R08: 0000000000000000 R09: ffff88003fa07dd0 > R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003fa07dd0 > R13: 0000000000000002 R14: ffffc20000000000 R15: 000000006f57e511 > FS: 0000000000000000(0000) GS:ffffffff80cf6a80(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 000000000000008c CR3: 0000000000201000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 1, threadinfo ffff88003fa06000, task ffff88003fa08000) > Stack: 00000000fed00000 ffffc20000000000 0000000100000003 0000000800000002 > 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > 0000000000000000 0000000000000000 0000000000000000 0000000000000000 > Call Trace: > [<ffffffff80d227c0>] ? hpet_late_init+0x0/0x1c0 > [<ffffffff80209045>] do_one_initcall+0x45/0x190 > [<ffffffff80296f39>] ? register_irq_proc+0x19/0xe0 > [<ffffffff80d0d140>] ? early_idt_handler+0x0/0x73 > [<ffffffff80d0dabc>] kernel_init+0x14c/0x1b0 > [<ffffffff80942ac1>] ? trace_hardirqs_on_thunk+0x3a/0x3f > [<ffffffff8020dbd9>] child_rip+0xa/0x11 > [<ffffffff8020ceee>] ? restore_args+0x0/0x30 > [<ffffffff80d0d970>] ? kernel_init+0x0/0x1b0 > [<ffffffff8020dbcf>] ? child_rip+0x0/0x11 > Code: 20 48 83 c1 01 48 39 f1 75 e3 44 89 e8 4c 8b 05 29 29 22 00 31 f6 48 8d 78 01 66 66 90 89 f0 48 8d 04 80 48 c1 e0 05 4a 8d 0c 00 <f6> 81 8c 00 00 00 08 74 26 8b 81 80 00 00 00 8b 91 88 00 00 00 > RIP [<ffffffff80d228be>] hpet_late_init+0xfe/0x1c0 > RSP <ffff88003fa07dd0> > CR2: 000000000000008c > Kernel panic - not syncing: Fatal exception There was one code path, with CONFIG_PCI_MSI disabled, where we were accessing hpet_devs without initialization. That resulted in the above crash. The change below adds a check for hpet_devs. Signed-off-by:
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Cyrill Gorcunov authored
Do not use KERN_DEBUG several times on the same line being printed. Introduced by mine previous patch, sorry. Reported-by:
-
Yinghai Lu authored
Signed-off-by:
-
Yinghai Lu authored
Andrew said, we don't need duplicated panic. because __alloc_bootmem already have that. Signed-off-by:
-
Cyrill Gorcunov authored
By changing printout form we are able to shrink (and clean up) code a bit. Former printout example: init IO_APIC IRQs IO-APIC (apicid-pin) 1-1, 1-2, 1-3 not connected. IO-APIC (apicid-pin) 2-1, 2-2, 2-3 not connected. New printout example: init IO_APIC IRQs 1-1 1-2 1-3 (apicid-pin) not connected 2-1 2-2 2-3 (apicid-pin) not connected Signed-off-by:
-
venkatesh.pallipadi@intel.com authored
Initialize a per CPU HPET MSI timer when possible. We retain the HPET timer 0 (IRQ 0) and timer 1 (IRQ 8) as is when legacy mode is being used. We setup the remaining HPET timers as per CPU MSI based timers. This per CPU timer will eliminate the need for timer broadcasting with IRQ 0 when there is non-functional LAPIC timer across CPU deep C-states. If there are more CPUs than number of available timers, CPUs that do not find any timer to use will continue using LAPIC and IRQ 0 broadcast. Signed-off-by:
-
Ingo Molnar authored
small style cleanups. Signed-off-by: -
venkatesh.pallipadi@intel.com authored
Basic HPET MSI setup code. Routines to perform basic MSI read write in HPET memory map and setting up irq_chip for HPET MSI. Signed-off-by:
-
venkatesh.pallipadi@intel.com authored
Preparatory patch before the actual HPET MSI changes. Sets up hpet_set_mode and hpet_next_event for the MSI related changes. Just the code refactoring and should be zero functional change. Signed-off-by:
-
venkatesh.pallipadi@intel.com authored
Change the IRQ affinity in the process context when the IRQ is disabled. Signed-off-by:
-
Yinghai Lu authored
need to change irq to int too Signed-off-by: -
Dean Nelson authored
Extraneous call to irq_to_desc(). Signed-off-by:
Dean Nelson <dcn@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Dean Nelson authored
An error return from create_irq_nr() is 0, but an error return from create_irq() is -1. Signed-off-by:
-
Cyrill Gorcunov authored
We use irq_cfg_lock lock in SPARSE_IRQ only context so move it under #ifdef and compiler will be happy. Signed-off-by:
-
Cyrill Gorcunov authored
Make the code width a bit shorter with ARRAY_SIZE macro. Signed-off-by:
-
Yinghai Lu authored
Andrew found the typo could break some platforms. also fix a checkpatch warning. Signed-off-by:
-
Yinghai Lu authored
Signed-off-by:
-
H. Peter Anvin authored
Impact: build failure on uniprocessor When compiling for !CONFIG_SMP, per_cpu_alloc_dyn_array() would fail to compile, since it uses per_cpu_offset, which is not defined for uniprocessor builds. Hence, do not compile per_cpu_alloc_dyn_array() for !CONFIG_SMP. Attempting to call this function in a uniprocessor configuration would be simply wrong in the first place. Signed-off-by:H. Peter Anvin <hpa@zytor.com>
-
Suresh Siddha authored
It is possible that, instead of PCI endpoint/sub-hierarchy structures, only IO-APIC/HPET devices may be reported under device scope structures. Fix the devices_cnt error check, which cares about only PCI structures and removes the dma-remapping unit structure (dmaru) when the devices_cnt is zero and include_all flag is not set. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Acked-by:
-
Suresh Siddha authored
In dmar_dev_scope_init(), functions called under for_each_drhd_unit()/ for_each_rmrr_units() can delete the list entry under some error conditions. So we should use list_for_each_entry_safe() for safe traversal. Signed-off-by:
-
Yinghai Lu authored
initialize the return value in dmar_parse_dev() Signed-off-by:
-
Yinghai Lu authored
Very early detection of the DMAR tables will setup fixmap mapping. For parsing these tables later (while enabling dma and/or interrupt remapping), early fixmap mapping shouldn't be used. Fix it by calling table detection routines again, which will call generic apci_get_table() for setting up the correct mapping. Signed-off-by:
-
Yinghai Lu authored
APIC_ARBPRI is a reserved register for XAPIC and beyond. APIC_RRR is a reserved register except for 82489DX, APIC for Pentium processors. APIC_EOI is a write only register. APIC_DFR is reserved in x2apic mode. Access to these registers in x2apic will result in #GP fault. Fix these apic register accesses. Signed-off-by:
-
Ingo Molnar authored
Stephen Rothwell reported such build failures on m68k/sparc/s390: > ERROR: "nr_irqs" [drivers/net/hamradio/baycom_ser_fdx.ko] undefined! > ERROR: "nr_irqs" [drivers/net/3c59x.ko] undefined! export nr_irqs on these architectures too. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Cyrill Gorcunov authored
According to entry_64.S we do pass pt_regs pointer into interrupt handlers but don't use them. So we safely may merge the declarations. Signed-off-by:
-
Yinghai Lu authored
fix non-sparseirq architectures. Signed-off-by:
-
