Block layer used to merge requests and bios with different failfast
settings.  This caused regular IOs to fail prematurely when they were
merged into failfast requests for readahead.

Niel Lambrechts could trigger the problem semi-reliably on ext4 when
resuming from STR.  ext4 uses readahead when reading inodes and
combined with the deterministic extra SATA PHY exception cycle during
resume on the specific configuration, non-readahead inode read would
fail causing ext4 errors.  Please read the following thread for
details.

  http://lkml.org/lkml/2009/5/23/21

This patch makes block layer reject merging if the failfast settings
don't match.  This is correct but likely to lower IO performance by
preventing regular IOs from mingling into surrounding readahead
requests.  Changes to allow such mixed merges and handle errors
correctly will be added later.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Niel Lambrechts <niel.lambrechts@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: Jens Axboe <axboe@carl.(none)>

When doing an unexpected shutdown like kexec the cciss
firmware might still have some commands in flight, which
it is trying to complete.
The driver is doing it's best on resetting the HBA,
but sadly there's a firmware issue causing the firmware
_not_ to abort or drop old commands.
So the firmware will send us commands which we haven't
accounted for, causing the driver to panic.

With this patch we're just ignoring these commands as
there is nothing we could be doing with them anyway.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>

Somehow I managed to generate a diff that put these 2 lines
into the wrong function:  should have been in dump_struct()
instead of in dump_enum().
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6:
  mtd: nand: fix build failure and incorrect return from omap_wait()
  mtd: Use BLOCK_NIL consistently in NFTL/INFTL
  mtd: m25p80 timeout too short for worst-case m25p16 devices
  mtd: atmel_nand: Fix typo s/parititions/partitions/
  mtd: cmdlineparts: Use 64-bit format when printing a debug message.
  mtd: maps: Remove BUS_ID_SIZE from integrator_flash
  jffs2: fix another potential leak on error path in scan.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: invalidation reverse calls
  fuse: allow umask processing in userspace
  fuse: fix bad return value in fuse_file_poll()
  fuse: fix return value of fuse_dev_write()

This fixes kernel.org bug #13584. The IOVA code attempted to optimise
the insertion of new ranges into the rbtree, with the unfortunate result
that some ranges just didn't get inserted into the tree at all. Then
those ranges would be handed out more than once, and things kind of go
downhill from there.

Introduced after 2.6.25 by ddf02886
("PCI: iova RB tree setup tweak").
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: mark gross <mgross@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can run a 32-bit kernel on boxes with an IOMMU, so we need
pci_unmap_addr() etc. to work -- without it, drivers will leak mappings.

To be honest, this whole thing looks like it's more pain than it's
worth; I'm half inclined to remove the no-op #else case altogether.

But this is the minimal fix, which just does the right thing if
CONFIG_DMAR is set.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org  [ for 2.6.30 ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Check before use it.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: remove redundant check for NULL cfqq in cfq_set_request()
  blocK: Restore barrier support for md and probably other virtual devices.
  block: get rid of queue-private command filter
  block: Create bip slabs with embedded integrity vectors
  cfq-iosched: get rid of the need for __GFP_NOFAIL in cfq_find_alloc_queue()
  cfq-iosched: move cfqq initialization out of cfq_find_alloc_queue()
  Trivial typo fixes in Documentation/block/data-integrity.txt.

* 'for-linus' of git://neil.brown.name/md:
  md: use interruptible wait when duration is controlled by userspace.
  md/raid5: suspend shouldn't affect read requests.
  md: tidy up error paths in md_alloc
  md: fix error path when duplicate name is found on md device creation.
  md: avoid dereferencing NULL pointer when accessing suspend_* sysfs attributes.
  md: Use new topology calls to indicate alignment and I/O sizes

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  Revert "ipv4: arp announce, arp_proxy and windows ip conflict verification"
  igb: return PCI_ERS_RESULT_DISCONNECT on permanent error
  e1000e: io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT
  e1000: return PCI_ERS_RESULT_DISCONNECT on permanent error
  e1000: fix unmap bug
  igb: fix unmap length bug
  ixgbe: fix unmap length bug
  ixgbe: Fix link capabilities during adapter resets
  ixgbe: Fix device capabilities of 82599 single speed fiber NICs.
  ixgbe: Fix SFP log messages
  usbnet: Remove private stats structure
  usbnet: Use netdev stats structure
  smsc95xx: Use netdev stats structure
  rndis_host: Use netdev stats structure
  net1080: Use netdev stats structure
  dm9601: Use netdev stats structure
  cdc_eem: Use netdev stats structure
  ipv4: Fix fib_trie rebalancing, part 3
  bnx2x: Fix the behavior of ethtool when ONBOOT=no
  sctp: xmit sctp packet always return no route error
  ...

One of the kmemleak changes caused the following
scheduling-while-holding-the-tasklist-lock regression on x86:

BUG: sleeping function called from invalid context at mm/kmemleak.c:795
in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak
2 locks held by kmemleak/1737:
 #0:  (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86
 #1:  (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c
Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip #59266
Call Trace:
 [<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20
 [<c102e490>] __might_sleep+0x10a/0x111
 [<c10c38d5>] scan_yield+0x17/0x3b
 [<c10c3970>] scan_block+0x39/0xd4
 [<c10c3bc6>] kmemleak_scan+0x1bb/0x39c
 [<c10c4331>] ? kmemleak_scan_thread+0x0/0x86
 [<c10c437b>] kmemleak_scan_thread+0x4a/0x86
 [<c104d73e>] kthread+0x6e/0x73
 [<c104d6d0>] ? kthread+0x0/0x73
 [<c100959f>] kernel_thread_helper+0x7/0x10
kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The bit causing it is highly dubious:

static void scan_yield(void)
{
        might_sleep();

        if (time_is_before_eq_jiffies(next_scan_yield)) {
                schedule();
                next_scan_yield = jiffies + jiffies_scan_yield;
        }
}

It called deep inside the codepath and in a conditional way,
and that is what crapped up when one of the new scan_block()
uses grew a tasklist_lock dependency.

This minimal patch removes that yielding stuff and adds the
proper cond_resched().

The background scanning thread could probably also be reniced
to +10.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With the changes for falling back to an oom_cfqq, we never fail
to find/allocate a queue in cfq_get_queue(). So remove the check.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

The next_ordered flag is only meaningful for devices that use __make_request.
So move the test against next_ordered out of generic code and in to
__make_request

Since this test was added, barriers have not worked on md or any
devices that don't use __make_request and so don't bother to set
next_ordered.  (dm explicitly sets something other than
QUEUE_ORDERED_NONE since
  commit 99360b4c
but notes in the comments that it is otherwise meaningless).

Cc: Ken Milmore <ken.milmore@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@carl.(none)>

Setup an emergency fallback cfqq that we allocate at IO scheduler init
time. If the slab allocation fails in cfq_find_alloc_queue(), we'll just
punt IO to that cfqq instead. This ensures that cfq_find_alloc_queue()
never fails without having to ensure free memory.

On cfqq lookup, always try to allocate a new cfqq if the given cfq io
context has the oom_cfqq assigned. This ensures that we only temporarily
punt to this shared queue.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

We're going to be needing that init code outside of that function
to get rid of the __GFP_NOFAIL in cfqq allocation.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Signed-off-by: Andre Noll <maan@systemlinux.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

User space can set various limits on an md array so that resync waits
when it gets to a certain point, or so that I/O is blocked for a short
while.
When md is waiting against one of these limit, it should use an
interruptible wait so as not to add to the load average, and so are
not to trigger a warning if the wait goes on for too long.
Signed-off-by: NeilBrown <neilb@suse.de>

md allows write to regions on an array to be suspended temporarily.
This allows user-space to participate is aspects of reshape.
In particular, data can be copied with not risk of a race.
We should not be blocking read requests though, so don't.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

This reverts commit 73ce7b01.

After discovering that we don't listen to gratuitious arps in 2.6.30
I tracked the failure down to this commit.

The patch makes absolutely no sense.  RFC2131 RFC3927 and RFC5227.
are all in agreement that an arp request with sip == 0 should be used
for the probe (to prevent learning) and an arp request with sip == tip
should be used for the gratitous announcement that people can learn
from.

It appears the author of the broken patch got those two cases confused
and modified the code to drop all gratuitous arp traffic.  Ouch!

Cc: stable@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI drivers that implement the io_error_detected callback should return
PCI_ERS_RESULT_DISCONNECT if the state passed in is
pci_channel_io_perm_failure.  This patch fixes the issue for igb.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

on permanent failure

PCI drivers that implement the io_error_detected callback
should return PCI_ERS_RESULT_DISCONNECT if the state
passed in is pci_channel_io_perm_failure.  This state is not
checked in many of the network drivers.

This patch fixes the omission in the e1000e driver.
Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI drivers that implement the io_error_detected callback
should return PCI_ERS_RESULT_DISCONNECT if the state
passed in is pci_channel_io_perm_failure.  This state is
not checked in many of the network drivers.

The patch fixes the omission in the e1000 driver.

Based on Mike Mason's similar patch for e1000e.
Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
CC: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

as reported by kerneloops.org

[  121.781161] ------------[ cut here ]------------
[  121.781171] WARNING: at lib/dma-debug.c:793 check_unmap+0x14e/0x577()
[  121.781173] Hardware name: S5520HC
[  121.781177] e1000 0000:0a:00.0: DMA-API: device driver tries to free DMA
memory it has not allocated [device address=0x00000001d688b0fa] [size=1522
bytes]
[  121.781180] Modules linked in: e1000 mdio  dca [last unloaded: ixgbe]
[  121.781187] Pid: 4793, comm: bash Tainted: P 2.6.30-master-06161113 #3
[  121.781190] Call Trace:
[  121.781195]  [<ffffffff8123056f>] ? check_unmap+0x14e/0x577
[  121.781201]  [<ffffffff81057a19>] warn_slowpath_common+0x77/0x8f
[  121.781205]  [<ffffffff81057ae1>] warn_slowpath_fmt+0x9f/0xa1
[  121.781212]  [<ffffffff81477ce2>] ? _spin_lock_irqsave+0x3f/0x49
[  121.781216]  [<ffffffff8122fa97>] ? get_hash_bucket+0x28/0x33
[  121.781220]  [<ffffffff8123056f>] check_unmap+0x14e/0x577
[  121.781225]  [<ffffffff810e4f48>] ? check_bytes_and_report+0x38/0xcb
[  121.781230]  [<ffffffff81230bbf>] debug_dma_unmap_page+0x80/0x92
[  121.781234]  [<ffffffff8122e549>] ? unmap_single+0x1a/0x4e
[  121.781239]  [<ffffffff813901e1>] ? __kfree_skb+0x74/0x78
[  121.781250]  [<ffffffffa00662ef>] pci_unmap_single+0x64/0x6d [e1000]
[  121.781259]  [<ffffffffa0066344>] e1000_clean_rx_ring+0x4c/0xbf [e1000]
[  121.781268]  [<ffffffffa00663df>] e1000_clean_all_rx_rings+0x28/0x36 [e1000]
[  121.781277]  [<ffffffffa0067464>] e1000_down+0x138/0x141 [e1000]
[  121.781286]  [<ffffffffa00681c2>] __e1000_shutdown+0x6b/0x198 [e1000]
[  121.781296]  [<ffffffffa0068405>] e1000_suspend+0x17/0x50 [e1000]
[  121.781301]  [<ffffffff81237665>] pci_legacy_suspend+0x3b/0xbe
[  121.781305]  [<ffffffff81237bc6>] pci_pm_suspend+0x3e/0xf1
[  121.781310]  [<ffffffff812eaf1c>] pm_op+0x57/0xde
[  121.781314]  [<ffffffff812eb444>] dpm_suspend_start+0x31e/0x470
[  121.781319]  [<ffffffff810877da>] suspend_devices_and_enter+0x3e/0x1a2
[  121.781323]  [<ffffffff81087a0f>] enter_state+0xd1/0x127
[  121.781327]  [<ffffffff8108717a>] state_store+0xa7/0xc9
[  121.781332]  [<ffffffff81221843>] kobj_attr_store+0x17/0x19
[  121.781336]  [<ffffffff8113c01e>] sysfs_write_file+0xe5/0x121
[  121.781341]  [<ffffffff810ed165>] vfs_write+0xab/0x105
[  121.781344]  [<ffffffff810ed279>] sys_write+0x47/0x6d
[  121.781349]  [<ffffffff81027aab>] system_call_fastpath+0x16/0x1b
[  121.781352] ---[ end trace 97bacaaac2ed7786 ]---

Fix is to correctly zero out internal ->dma value when unmapping
and make sure never to unmap unless there specifically was a mapping done.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

driver was mixing NET_IP_ALIGN count bytes in map/unmap calls
unevenly. Only map the bytes that the hardware might dma into

also fix unmap related bug where ->dma was not being cleared
after unmap
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch addresses three WARN_ON statements from DMA-API debug code

ixgbe is mapping more than it unmaps, reduce the length of the map call and
remove the "used once" local variable.

found by Joerg Roedel <joerg.roedel@amd.com> in 2.6.30, so is a candidate
for -stable.

in addition, fix missing ->dma = 0 after unmap to prevent double free with
pci_unmap_single

and lastly, don't unmap (half) pages that aren't mapped.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adapter link advertisement capabilities were not persistent during
adapter resets. While configuring multispeed fiber link check for
phy autoneg_advertised settings before overwriting with default
link capabilities
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

82599 single speed fiber modules only support 10G/Full. Return
proper device capabilities while querrying the adapter and error
while changing device advertisement/speed/duplex capabilities.
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We had a wide range of log messages for the same sort of SFP
failure.  This patch makes them all more similar and less
confusing along with converting them to dev_err.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that nothing uses the private stats structure we can remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that netdev has its own stats structure we should use that
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that netdev has its own stats structure we should use that
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that netdev has its own stats structure we should use that
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that netdev has its own stats structure we should use that
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that netdev has its own stats structure we should use that
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that netdev has its own stats structure we should use that
instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the recent bug in md_alloc showed, having a single exit path for
unlocking and putting is a good idea.  So restructure md_alloc to have
a single mutex_unlock and mddev_put, and use gotos where necessary.
Found-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

When an md device is created by name (rather than number) we need to
check that the name is not already in use.  If this check finds a
duplicate, we return an error without dropping the lock or freeing
the newly create mddev.
This patch fixes that.

Cc: stable@kernel.org
Found-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>