Video overlay plane should be registered only when suitable hardware
sub-block (Video Processor) is available.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch replaces usage of crtc->mode with crtc->state->adjusted_mode
like it is already done in common plane code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch introduces exynos_drm_plane_state structure, which subclasses
drm_plane_state and holds precalculated data suitable for configuring
Exynos hardware.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

DMA address is a framebuffer attribute and the right place for it is
exynos_drm_framebuffer not exynos_drm_plane. This patch also introduces
helper function for getting dma address of the given framebuffer.

Changelog v2:
- use state->fb instead of plane->base.fb.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Display area is already checked by exynos plane core, so there is no
need for such check in driver code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This driver was not used after introduction of common clock framework.
This patch adds missing prepare/unprepare calls and allows to use it
again with current kernel code.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds device tree support for exynos_drm_gsc. This patch
also fixed build issue on non-Exynos platforms, thus dependency on
!ARCH_MULTIPLATFORM can be now removed. The driver cannot be used
simultaneously with V4L2 Mem2Mem GScaller driver thought.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

At probe time, gsc clock is not enabled, so pm_runtime state should
be deactive. So this patch removes pm_runtime_set_active() from
gsc_probe().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Ths patch changes the clk_enable and clk_disable call in gsc driver
into clk_prepare_enable and clk_disable_unprepare.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The DT binding for the Exynos DRM Display Port (DP) driver isn't consistent
since it uses a phandle to describe the connection between the DP port and
the display panel but uses the OF graph ports and endpoints to describe the
connection betwen the DP port, a bridge chip and the panel.

The Exynos DP driver and the DT binding have been changed to allow also to
describe the DP port to panel connection using ports / endpoints (OF graph)
so this patch changes the Exynos5800 Peach Pi DT to make it consistent with
the Exynos5420 Peach Pit that has a eDP to LVDS chip and uses OF graph too.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch updates a ports node binding for panel.

With this, dp node can have a ports node which describes
a remote endpoint node that can be connected to panel or bridge
node.

Changelog v2:
- remove unnecessary properties and numbering.
- update description about eDP device.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Rob Herring <robh@kernel.org>

This patch adds of_graph dt binding support for panel device
and also keeps the backward compatibility.

i.e.,
The dts file for Exynos5800 based peach pi board
has a panel property so we need to keep the backward compatibility.

Changelog v3:
- bind only one of two nodes outbound - panel or bridge.

Changelog v2:
- return -EINVAL if getting a port node failed.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

This patch just removes unused variables, i and ret.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

This patch makes it to return -EINVAL instead of -ENXIO
when getting a port or remote node failed.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

PM ops in exynos_drm_drv were split into two separate function as they were
used also by drm device. Since PM ops have been removed from drm device, the
functions can be merged together.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch adds runtime pm interfaces to dsi driver.

Each sub driver should control not only its own clocks and
regulator but also its power domain.

For this, it removes existing exynos_dsi_poweron/poweroff interfaces
and uses runtime pm interfaces instead.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with
proper refcnt instead of rely on specific flags to track the enabled
state.

Changelog v3:
- revive suspended to keep current dpms mode

Changelog v2:
- Modify CONFIG_PM_SLEEP -> CONFIG_PM
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with
proper refcnt instead of rely on specific flags to track the enabled
state.

Changelog v3:
- Change CONFIG_PM_SLEEP -> CONFIG_PM

Changelog v2:
- no change
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.

Chnagelog v3:
- Revive suspended varable to check the suspend status.

Changelog v2:
- Remove unnecessary changes which removed commit callback from decon drivers
  and modify CONFIG_PM_SLEEP -> CONFIG_PM
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.

Changelog v2:
- revive MXR_BIT_POWERED flag to keep current dpms mode.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with proper
refcnt instead of rely on specific flags to track the enabled state.

Changelog v3:
- revive powered flag to keep current dpms mode

Changelog v2:
- Mofidy CONFIG_PM_SLEEP -> CONFIG_PM
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Let pm_runtime handle the enabling/disabling of the device with
proper refcnt instead of rely on specific flags to track the enabled
state.

Chnagelog v3:
- revive dpms_mode to keep current dpms mode.

Changelog v2:
- no change
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The DP device will be properly enabled at the enable() call just
after the bind call finishes.

Changelog v2:
- no change
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Fix all the problems with the header files and userspace builds
off them. I really care so little about this, but hey who am
I to stop progress.

* 'drm-header-fixes' of https://github.com/GabrielL/linux: (30 commits)
  drm: fix inclusion of drm.h in via_drm.h
  drm: fix inclusion of drm.h in vmwgfx_drm.h
  drm: fix inclusion of drm.h in virtgpu_drm.h
  drm: fix inclusion of drm.h in tegra_drm.h
  drm: fix inclusion of drm.h in savage_drm.h
  drm: fix inclusion of drm.h in r128_drm.h
  drm: fix inclusion of drm.h in qxl_drm.h
  drm: fix inclusion of drm.h in omap_drm.h
  drm: fix inclusion of drm.h in msm_drm.h
  drm: fix inclusion of drm.h in mga_drm.h
  drm: fix inclusion of drm.h in exynos_sarea.h
  drm: fix inclusion of drm.h in i810_drm.h
  drm: fix inclusion of drm.h in exynos_sarea.h
  drm: fix inclusion of drm.h in drm_sarea.h
  drm: drm_mode.h fix includes
  drm: drm_fourcc.h fix includes
  drm: include drm.h in armada_drm.h
  include/uapi/drm/amdgpu_drm.h: use __u32 and __u64 from <linux/types.h>
  drm: Kbuild: add admgpu_drm.h to the installed headers
  drm: use __u{32,64} instead of uint{32,64}_t in virtgpu_drm.h
  ...

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for
the libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Using `#include "drm.h"` instead of `#include <drm/drm.h>` allow drm
headers to be moved in another directory without changes, like for the
libdrm imports.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Instead of using linux/types.h, drm headers should use drm.h, in order
to handle the portability issues in only one place.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>

Instead of using linux/types.h, drm headers should use drm.h, in order
to handle the portability issues in only one place.
Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
CC: Mikko Rapeli <mikko.rapeli@iki.fi>