- 07 Jun, 2017 40 commits
-
-
Li RongQing authored
commit abb6013c upstream. when read/write the 64bit data, the correct lock should be hold. Fixes: 87b6d218 ("tunnel: implement 64 bits statistics") Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Dan Carpenter authored
commit 63117f09 upstream. Casting is a high precedence operation but "off" and "i" are in terms of bytes so we need to have some parenthesis here. Fixes: fbfa743a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
commit fbfa743a upstream. This function suffers from multiple issues. First one is that pskb_may_pull() may reallocate skb->head, so the 'raw' pointer needs either to be reloaded or not used at all. Second issue is that NEXTHDR_DEST handling does not validate that the options are present in skb->data, so we might read garbage or access non existent memory. With help from Willem de Bruijn. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 22a1e778 upstream. The commit 8dfbcc43 ("[media] xc2028: avoid use after free") tried to address the reported use-after-free by clearing the reference. However, it's clearing the wrong pointer; it sets NULL to priv->ctrl.fname, but it's anyway overwritten by the next line memcpy(&priv->ctrl, p, sizeof(priv->ctrl)). OTOH, the actual code accessing the freed string is the strcmp() call with priv->fname: if (!firmware_name[0] && p->fname && priv->fname && strcmp(p->fname, priv->fname)) free_firmware(priv); where priv->fname points to the previous file name, and this was already freed by kfree(). For fixing the bug properly, this patch does the following: - Keep the copy of firmware file name in only priv->fname, priv->ctrl.fname isn't changed; - The allocation is done only when the firmware gets loaded; - The kfree() is called in free_firmware() commonly Fixes: commit 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Dan Carpenter authored
commit 210bd104 upstream. We have to unlock before returning -ENOMEM. Fixes: 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 8dfbcc43 upstream. If struct xc2028_config is passed without a firmware name, the following trouble may happen: [11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [11009.907491] ================================================================== [11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40 [11009.907992] Read of size 1 by task modprobe/28992 [11009.907994] ============================================================================= [11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected [11009.907999] ----------------------------------------------------------------------------- [11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992 [11009.908012] ___slab_alloc+0x581/0x5b0 [11009.908014] __slab_alloc+0x51/0x90 [11009.908017] __kmalloc+0x27b/0x350 [11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] [11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60 [11009.908029] usb_submit_urb+0xb0e/0x1200 [11009.908032] usb_serial_generic_write_start+0xb6/0x4c0 [11009.908035] usb_serial_generic_write+0x92/0xc0 [11009.908039] usb_console_write+0x38a/0x560 [11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0 [11009.908051] console_unlock+0x40d/0x900 [11009.908056] vprintk_emit+0x4b4/0x830 [11009.908061] vprintk_default+0x1f/0x30 [11009.908064] printk+0x99/0xb5 [11009.908067] kasan_report_error+0x10a/0x550 [11009.908070] __asan_report_load1_noabort+0x43/0x50 [11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992 [11009.908077] __slab_free+0x2ec/0x460 [11009.908080] kfree+0x266/0x280 [11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028] [11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908108] do_one_initcall+0x141/0x300 [11009.908111] do_init_module+0x1d0/0x5ad [11009.908114] load_module+0x6666/0x9ba0 [11009.908117] SyS_finit_module+0x108/0x130 [11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080 [11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001 [11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(...... [11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j.... [11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43 [11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80 [11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280 [11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4 [11009.908158] Call Trace: [11009.908162] [<ffffffff81932007>] dump_stack+0x4b/0x64 [11009.908165] [<ffffffff81556759>] print_trailer+0xf9/0x150 [11009.908168] [<ffffffff8155ccb4>] object_err+0x34/0x40 [11009.908171] [<ffffffff8155f260>] kasan_report_error+0x230/0x550 [11009.908175] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908179] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908182] [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50 [11009.908185] [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0 [11009.908189] [<ffffffff8194cea6>] ? strcmp+0x96/0xb0 [11009.908192] [<ffffffff8194cea6>] strcmp+0x96/0xb0 [11009.908196] [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028] [11009.908200] [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908203] [<ffffffff8155ea78>] ? memset+0x28/0x30 [11009.908206] [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028] [11009.908211] [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908215] [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb] [11009.908219] [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb] [11009.908222] [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x] [11009.908226] [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x] [11009.908230] [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10 [11009.908233] [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80 [11009.908238] [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908242] [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb] [11009.908245] [<ffffffff8195222d>] ? string+0x14d/0x1f0 [11009.908249] [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0 [11009.908253] [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0 [11009.908257] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908260] [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0 [11009.908264] [<ffffffff812e9846>] ? __module_address+0xb6/0x360 [11009.908268] [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0 [11009.908271] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908275] [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290 [11009.908278] [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300 [11009.908282] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908285] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908289] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908292] [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10 [11009.908296] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908299] [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400 [11009.908302] [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300 [11009.908306] [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20 [11009.908309] [<ffffffff8159e708>] ? put_object+0x48/0x70 [11009.908314] [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908317] [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908320] [<ffffffffa0150000>] ? 0xffffffffa0150000 [11009.908324] [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908327] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [11009.908330] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40 [11009.908333] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908337] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908340] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908343] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908346] [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0 [11009.908350] [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad [11009.908353] [<ffffffff812f2626>] load_module+0x6666/0x9ba0 [11009.908356] [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50 [11009.908361] [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb] [11009.908366] [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20 [11009.908369] [<ffffffff815bc940>] ? open_exec+0x50/0x50 [11009.908374] [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0 [11009.908377] [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130 [11009.908379] [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0 [11009.908383] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14 [11009.908394] [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908396] Memory state around the buggy address: [11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc [11009.908405] ^ [11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908411] ================================================================== In order to avoid it, let's set the cached value of the firmware name to NULL after freeing it. While here, return an error if the memory allocation fails. Signed-off-by:
-
Vitaly Kuznetsov authored
commit a9f61ca7 upstream. When we crash from NMI context (e.g. after NMI injection from host when 'sysctl -w kernel.unknown_nmi_panic=1' is set) we hit kernel BUG at mm/vmalloc.c:1530! as vfree() is denied. While the issue could be solved with in_nmi() check instead I opted for skipping vfree on all sorts of crashes to reduce the amount of work which can cause consequent crashes. We don't really need to free anything on crash. [js] no tsc and kexec in 3.12 yet Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Eric Dumazet authored
commit f1712c73 upstream. Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by:
Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Oliver O'Halloran authored
commit 90cae1fe upstream. As a part of memory initialisation the architecture passes an array to free_area_init_nodes() which specifies the max PFN of each memory zone. This array is not necessarily monotonic (due to unused zones) so this array is parsed to build monotonic lists of the min and max PFN for each zone. ZONE_MOVABLE is special cased here as its limits are managed by the mm subsystem rather than the architecture. Unfortunately, this special casing is broken when ZONE_MOVABLE is the not the last zone in the zone list. The core of the issue is: if (i == ZONE_MOVABLE) continue; arch_zone_lowest_possible_pfn[i] = arch_zone_highest_possible_pfn[i-1]; As ZONE_MOVABLE is skipped the lowest_possible_pfn of the next zone will be set to zero. This patch fixes this bug by adding explicitly tracking where the next zone should start rather than relying on the contents arch_zone_highest_possible_pfn[]. Thie is low priority. To get bitten by this you need to enable a zone that appears after ZONE_MOVABLE in the zone_type enum. As far as I can tell this means running a kernel with ZONE_DEVICE or ZONE_CMA enabled, so I can't see this affecting too many people. I only noticed this because I've been fiddling with ZONE_DEVICE on powerpc and 4.6 broke my test kernel. This bug, in conjunction with the changes in Taku Izumi's kernelcore=mirror patch (d91749c1) and powerpc being the odd architecture which initialises max_zone_pfn[] to ~0ul instead of 0 caused all of system memory to be placed into ZONE_DEVICE at boot, followed a panic since device memory cannot be used for kernel allocations. I've already submitted a patch to fix the powerpc specific bits, but I figured this should be fixed too. Link: http://lkml.kernel.org/r/1462435033-15601-1-git-send-email-oohall@gmail.comSigned-off-by:
Oliver O'Halloran <oohall@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alan Stern authored
commit bcdbeb84 upstream. The stop_activity() routine in dummy-hcd is supposed to unlink all active requests for every endpoint, among other things. But it doesn't handle ep0. As a result, fuzz testing can generate a WARNING like the following: WARNING: CPU: 0 PID: 4410 at drivers/usb/gadget/udc/dummy_hcd.c:672 dummy_free_request+0x153/0x170 Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor Not tainted 4.9.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006a64ed10 ffffffff81f96b8a ffffffff41b58ab3 1ffff1000d4c9d35 ffffed000d4c9d2d ffff880065f8ac00 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 0000000041b58ab3 ffffffff859410e0 ffffffff813f0590 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff812b808f>] __warn+0x19f/0x1e0 kernel/panic.c:550 [<ffffffff812b831c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [<ffffffff830fcb13>] dummy_free_request+0x153/0x170 drivers/usb/gadget/udc/dummy_hcd.c:672 [<ffffffff830ed1b0>] usb_ep_free_request+0xc0/0x420 drivers/usb/gadget/udc/core.c:195 [<ffffffff83225031>] gadgetfs_unbind+0x131/0x190 drivers/usb/gadget/legacy/inode.c:1612 [<ffffffff830ebd8f>] usb_gadget_remove_driver+0x10f/0x2b0 drivers/usb/gadget/udc/core.c:1228 [<ffffffff830ec084>] usb_gadget_unregister_driver+0x154/0x240 drivers/usb/gadget/udc/core.c:1357 This patch fixes the problem by iterating over all the endpoints in the driver's ep array instead of iterating over the gadget's ep_list, which explicitly leaves out ep0. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Alan Stern authored
commit 0a8fd134 upstream. When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by:
-
Eric Dumazet authored
commit 43a66845 upstream. We got a report of yet another bug in ping http://www.openwall.com/lists/oss-security/2017/03/24/6 ->disconnect() is not called with socket lock held. Fix this by acquiring ping rwlock earlier. Thanks to Daniel, Alexander and Andrey for letting us know this problem. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by:
Daniel Jiang <danieljiang0415@gmail.com> Reported-by:
Solar Designer <solar@openwall.com> Reported-by:
-
Johan Hovold authored
commit 687e0687 upstream. USBTMC devices are required to have a bulk-in and a bulk-out endpoint, but the driver failed to verify this, something which could lead to the endpoint addresses being taken from uninitialised memory. Make sure to zero all private data as part of allocation, and add the missing endpoint sanity check. Note that this also addresses a more recently introduced issue, where the interrupt-in-presence flag would also be uninitialised whenever the optional interrupt-in endpoint is not present. This in turn could lead to an interrupt urb being allocated, initialised and submitted based on uninitialised values. Fixes: dbf3e7f6 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Fixes: 5b775f67 ("USB: add USB test and measurement class driver") Signed-off-by:
Johan Hovold <johan@kernel.org> [ johan: backport to v4.4 ] Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit ecf1e225 upstream. Instead of the one when another syscall takes place while another is being processed (in another CPU, but we show it serialized, so need to "interrupt" the other), and also when finally showing the sys_enter + sys_exit + duration, where we were showing the sample->time for the sys_exit, duh. Before: # perf trace sleep 1 <SNIP> 0.373 ( 0.001 ms): close(fd: 3 ) = 0 1000.626 (1000.211 ms): nanosleep(rqtp: 0x7ffd6ddddfb0) = 0 1000.653 ( 0.003 ms): close(fd: 1 ) = 0 1000.657 ( 0.002 ms): close(fd: 2 ) = 0 1000.667 ( 0.000 ms): exit_group( ) # After: # perf trace sleep 1 <SNIP> 0.336 ( 0.001 ms): close(fd: 3 ) = 0 0.373 (1000.086 ms): nanosleep(rqtp: 0x7ffe303e9550) = 0 1000.481 ( 0.002 ms): close(fd: 1 ) = 0 1000.485 ( 0.001 ms): close(fd: 2 ) = 0 1000.494 ( 0.000 ms): exit_group( ) [root@jouet linux]# [js] no trace__printf_interrupted_entry in 3.12 yet Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ecbzgmu2ni6glc6zkw8p1zmx@git.kernel.org Fixes: 752fde44 ("perf trace: Support interrupted syscalls") Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
commit 4c47af4d upstream. Problem statement: 1) both paths (primary path1 and alternate path2) are up after the association has been established i.e., HB packets are normally exchanged, 2) path2 gets inactive after path_max_retrans * max_rto timed out (i.e. path2 is down completely), 3) now, if a transmission times out on the only surviving/active path1 (any ~1sec network service impact could cause this like a channel bonding failover), then the retransmitted packets are sent over the inactive path2; this happens with partial failover and without it. Besides not being optimal in the above scenario, a small failure or timeout in the only existing path has the potential to cause long delays in the retransmission (depending on RTO_MAX) until the still active path is reselected. Further, when the T3-timeout occurs, we have active_patch == retrans_path, and even though the timeout occurred on the initial transmission of data, not a retransmit, we end up updating retransmit path. RFC4960, section 6.4. "Multi-Homed SCTP Endpoints" states under 6.4.1. "Failover from an Inactive Destination Address" the following: Some of the transport addresses of a multi-homed SCTP endpoint may become inactive due to either the occurrence of certain error conditions (see Section 8.2) or adjustments from the SCTP user. When there is outbound data to send and the primary path becomes inactive (e.g., due to failures), or where the SCTP user explicitly requests to send data to an inactive destination transport address, before reporting an error to its ULP, the SCTP endpoint should try to send the data to an alternate __active__ destination transport address if one exists. When retransmitting data that timed out, if the endpoint is multihomed, it should consider each source-destination address pair in its retransmission selection policy. When retransmitting timed-out data, the endpoint should attempt to pick the most divergent source-destination pair from the original source-destination pair to which the packet was transmitted. Note: Rules for picking the most divergent source-destination pair are an implementation decision and are not specified within this document. So, we should first reconsider to take the current active retransmission transport if we cannot find an alternative active one. If all of that fails, we can still round robin through unkown, partial failover, and inactive ones in the hope to find something still suitable. Commit 4141ddc0 ("sctp: retran_path update bug fix") broke that behaviour by selecting the next inactive transport when no other active transport was found besides the current assoc's peer.retran_path. Before commit 4141ddc0, we would have traversed through the list until we reach our peer.retran_path again, and in case that is still in state SCTP_ACTIVE, we would take it and return. Only if that is not the case either, we take the next inactive transport. Besides all that, another issue is that transports in state SCTP_UNKNOWN could be preferred over transports in state SCTP_ACTIVE in case a SCTP_ACTIVE transport appears after SCTP_UNKNOWN in the transport list yielding a weaker transport state to be used in retransmission. This patch mostly reverts 4141ddc0, but also rewrites this function to introduce more clarity and strictness into the code. A strict priority of transport states is enforced in this patch, hence selection is active > unkown > partial failover > inactive. Fixes: 4141ddc0 ("sctp: retran_path update bug fix") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Acked-by:
Vlad Yasevich <yasevich@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit cb4855b4 upstream. We fixed this to use free_netdev() instead of kfree() but unfortunately free_netdev() doesn't accept NULL pointers. Smatch complains about this, it's not something I discovered through testing. Fixes: 3030d40b ('staging: vt6655: use free_netdev instead of kfree') Fixes: 0a438d5b ('staging: vt6656: use free_netdev instead of kfree') Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [wt: only vt6656 was converted to free_netdev in 3.10] Signed-off-by:
-
Herbert Xu authored
commit 2eb783c4 upstream. We set the flag TUN_PKT_STRIP if the user buffer provided is too small to contain the entire packet plus meta-data. However, this has been broken ever since we added GSO meta-data. VLAN acceleration also has the same problem. This patch fixes this by taking both into account when setting the TUN_PKT_STRIP flag. The fact that this has been broken for six years without anyone realising means that nobody actually uses this flag. Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vladimir Zapolskiy authored
commit af92305e upstream. On i.MX31 AVIC interrupt controller base address is at 0x68000000. The problem was shadowed by the AVIC driver, which takes the correct base address from a SoC specific header file. Fixes: d2a37b3d ("ARM i.MX31: Add devicetree support") Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 1f87aee6 upstream. i.MX31 Clock Control Module controller is found on AIPS2 bus, move it there from SPBA bus to avoid a conflict of device IO space mismatch. Fixes: ef0e4a60 ("ARM: mx31: Replace clk_register_clkdev with clock DT lookup") Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
James Hogan authored
commit 162b270c upstream. KGDB is a kernel debug stub and it can't be used to debug userland as it can only safely access kernel memory. On MIPS however KGDB has always got the register state of sleeping processes from the userland register context at the beginning of the kernel stack. This is meaningless for kernel threads (which never enter userland), and for user threads it prevents the user seeing what it is doing while in the kernel: (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () 2 Thread 1 (init) 0x000000007705c4b4 in ?? () 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Get the register state instead from the (partial) kernel register context stored in the task's thread_struct for resume() to restore. All threads now correctly appear to be in context_switch(): (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 2 Thread 1 (init) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Call clobbered registers which aren't saved and exception registers (BadVAddr & Cause) which can't be easily determined without stack unwinding are reported as 0. The PC is taken from the return address, such that the state presented matches that found immediately after returning from resume(). Fixes: 88547001 ("[MIPS] kgdb: add arch support for the kernel's kgdb core") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15829/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Guillaume Nault authored
commit e08293a4 upstream. Take a reference on the sessions returned by l2tp_session_find_nth() (and rename it l2tp_session_get_nth() to reflect this change), so that caller is assured that the session isn't going to disappear while processing it. For procfs and debugfs handlers, the session is held in the .start() callback and dropped in .show(). Given that pppol2tp_seq_session_show() dereferences the associated PPPoL2TP socket and that l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to call the session's .ref() callback to prevent the socket from going away from under us. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Nathan Sullivan authored
commit 49d52e81 upstream. If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Acked-by:
Xander Huff <xander.huff@ni.com> Acked-by:
Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Hongxu Jia authored
commit 17a49cd5 upstream. Since 09d96860 ("netfilter: x_tables: do compat validation via translate_table"), it used compatr structure to assign newinfo structure. In translate_compat_table of ip_tables.c and ip6_tables.c, it used compatr->hook_entry to replace info->hook_entry and compatr->underflow to replace info->underflow, but not do the same replacement in arp_tables.c. It caused invoking 32-bit "arptbale -P INPUT ACCEPT" failed in 64bit kernel. -------------------------------------- root@qemux86-64:~# arptables -P INPUT ACCEPT root@qemux86-64:~# arptables -P INPUT ACCEPT ERROR: Policy for `INPUT' offset 448 != underflow 0 arptables: Incompatible with this kernel -------------------------------------- Fixes: 09d96860 ("netfilter: x_tables: do compat validation via translate_table") Signed-off-by:
Hongxu Jia <hongxu.jia@windriver.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 78f7a45d upstream. I noticed that reading the snapshot file when it is empty no longer gives a status. It suppose to show the status of the snapshot buffer as well as how to allocate and use it. For example: ># cat snapshot # tracer: nop # # # * Snapshot is allocated * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') But instead it just showed an empty buffer: ># cat snapshot # tracer: nop # # entries-in-buffer/entries-written: 0/0 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | What happened was that it was using the ring_buffer_iter_empty() function to see if it was empty, and if it was, it showed the status. But that function was returning false when it was empty. The reason was that the iter header page was on the reader page, and the reader page was empty, but so was the buffer itself. The check only tested to see if the iter was on the commit page, but the commit page was no longer pointing to the reader page, but as all pages were empty, the buffer is also. Fixes: 651e22f2 ("ring-buffer: Always reset iterator to reader page") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit df62db5b upstream. Currently the snapshot trigger enables the probe and then allocates the snapshot. If the probe triggers before the allocation, it could cause the snapshot to fail and turn tracing off. It's best to allocate the snapshot buffer first, and then enable the trigger. If something goes wrong in the enabling of the trigger, the snapshot buffer is still allocated, but it can also be freed by the user by writting zero into the snapshot buffer file. Also add a check of the return status of alloc_snapshot(). Fixes: 77fd5c15 ("tracing: Add snapshot trigger to function probes") Signed-off-by:
-
Ben Hutchings authored
commit 7926aff5 upstream. Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit 5593523f upstream. Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556Reported-by:
Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Tested-by:
-
Benjamin Herrenschmidt authored
commit 7ed23e1b upstream. On Power8 & Power9 the early CPU inititialisation in __init_HFSCR() turns on HFSCR[TM] (Hypervisor Facility Status and Control Register [Transactional Memory]), but that doesn't take into account that TM might be disabled by CPU features, or disabled by the kernel being built with CONFIG_PPC_TRANSACTIONAL_MEM=n. So later in boot, when we have setup the CPU features, clear HSCR[TM] if the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account for the CONFIG_PPC_TRANSACTIONAL_MEM=n case. Without this a KVM guest might try use TM, even if told not to, and cause an oops in the host kernel. Typically the oops is seen in __kvmppc_vcore_entry() and may or may not be fatal to the host, but is always bad news. In practice all shipping CPU revisions do support TM, and all host kernels we are aware of build with TM support enabled, so no one should actually be able to hit this in the wild. Fixes: 2a3563b0 ("powerpc: Setup in HFSCR for POWER8") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Rewrite change log with input from Sam, add Fixes/stable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [sb: Backported to linux-4.4.y: adjusted context] Signed-off-by:
-
Geert Uytterhoeven authored
commit 309124e2 upstream. According to full-history-linux commit d3794f4fa7c3edc3 ("[PATCH] M68k update (part 25)"), port operations are allowed on m68k if CONFIG_ISA is defined. However, commit 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") accidentally changed an "||" into an "&&", disabling it completely on m68k. This logic was retained when introducing the DEVPORT symbol in commit 4f911d64 ("Make /dev/port conditional on config symbol"). Drop the bogus dependency on !M68K to fix this. Fixes: 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Al Stone <ahs3@redhat.com> Signed-off-by:
-
Jack Morgenstein authored
commit 291c566a upstream. In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Eugenia Emantayev authored
commit 6496bbf0 upstream. Single send WQE in RX buffer should be stamped with software ownership in order to prevent the flow of QP in error in FW once UPDATE_QP is called. Fixes: 9f519f68 ('mlx4_en: Not using Shared Receive Queues') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Marcelo Henrique Cerri authored
commit d82c0d12 upstream. Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72 ([S390] fix boot failures with compressed kernels) Reviewed-by:
Joy Latten <joy.latten@canonical.com> Reviewed-by:
Vineetha HariPai <vineetha.hari.pai@canonical.com> Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
James Hogan authored
commit b884a190 upstream. The rapf copy loops in the Meta usercopy code is missing some extable entries for HTP cores with unaligned access checking enabled, where faults occur on the instruction immediately after the faulting access. Add the fixup labels and extable entries for these cases so that corner case user copy failures don't cause kernel crashes. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit 2c0b1df8 upstream. The fixup code to rewind the source pointer in __asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by a single unit (4 or 8 bytes), however this is insufficient if the fault didn't occur on the first load in the loop, as the source pointer will have been incremented but nothing will have been stored until all 4 register [pairs] are loaded. Read the LSM_STEP field of TXSTATUS (which is already loaded into a register), a bit like the copy_to_user versions, to determine how many iterations of MGET[DL] have taken place, all of which need rewinding. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit fd40eee1 upstream. The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP to decide how far to rewind the source pointer. There is a special case for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0 even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ which is conditional upon the Z condition flag, but the AND instruction which masked the TXStatus.LSM_STEP field didn't set the condition flags based on the result. Fix that now by using ANDS which does set the flags, and also marking the condition codes as clobbered by the inline assembly. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
James Hogan authored
commit fb8ea062 upstream. When copying to userland on Meta, if any faults are encountered immediately abort the copy instead of continuing on and repeatedly faulting, and worse potentially copying further bytes successfully to subsequent valid pages. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Hogan authored
commit 22572119 upstream. Fix the error checking of the alignment adjustment code in raw_copy_from_user(), which mistakenly considers it safe to skip the error check when aligning the source buffer on a 2 or 4 byte boundary. If the destination buffer was unaligned it may have started to copy using byte or word accesses, which could well be at the start of a new (valid) source page. This would result in it appearing to have copied 1 or 2 bytes at the end of the first (invalid) page rather than none at all. Fixes: 373cd784 ("metag: Memory handling") Signed-off-by:
-
Wei Yongjun authored
commit 62277de7 upstream. In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com Fixes: 6c43e554 ("ring-buffer: Add ring buffer startup selftest") Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
bsegall@google.com authored
commit 5402e97a upstream. In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against __TASK_TRACED. If this races with the ptrace_unfreeze_traced at the end of a PTRACE_LISTEN, this can wake the task /after/ the check against __TASK_TRACED, but before the reset of state to TASK_TRACED. This causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup against TRACED while the task is still on the rq wake_list, corrupting it. Oleg said: "The kernel can crash or this can lead to other hard-to-debug problems. In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced() assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the contract. Obviusly it is very wrong to manipulate task->state if this task is already running, or WAKING, or it sleeps again" [akpm@linux-foundation.org: coding-style fixes] Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL") Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.comSigned-off-by:
Ben Segall <bsegall@google.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Andrew Lunn authored
commit 4eba7bb1 upstream. When a multicast group is joined on a socket, a struct ip_mc_socklist is appended to the sockets mc_list containing information about the joined group. If the interface is hot unplugged, this entry becomes stale. Prior to commit 52ad353a ("igmp: fix the problem when mc leave group") it was possible to remove the stale entry by performing a IP_DROP_MEMBERSHIP, passing either the old ifindex or ip address on the interface. However, this fix enforces that the interface must still exist. Thus with time, the number of stale entries grows, until sysctl_igmp_max_memberships is reached and then it is not possible to join and more groups. The previous patch fixes an issue where a IP_DROP_MEMBERSHIP is performed without specifying the interface, either by ifindex or ip address. However here we do supply one of these. So loosen the restriction on device existence to only apply when the interface has not been specified. This then restores the ability to clean up the stale entries. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 52ad353a "(igmp: fix the problem when mc leave group") Signed-off-by:
-
