- 22 Feb, 2014 6 commits
-
-
Steve French authored
commit 666753c3 upstream. When mounting with smb2 (or smb2.1 or smb3) we need to check to make sure that attempts to query or set extended attributes do not attempt to send the request with the older cifs protocol instead (eventually we also need to add the support in SMB2 to query/set extended attributes but this patch prevents us from using the wrong protocol for extended attribute operations). Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naoya Horiguchi authored
commit 8d547ff4 upstream. mce-test detected a test failure when injecting error to a thp tail page. This is because we take page refcount of the tail page in madvise_hwpoison() while the fix in commit a3e0f9e4 ("mm/memory-failure.c: transfer page count from head page to tail page after split thp") assumes that we always take refcount on the head page. When a real memory error happens we take refcount on the head page where memory_failure() is called without MF_COUNT_INCREASED set, so it seems to me that testing memory error on thp tail page using madvise makes little sense. This patch cancels moving refcount in !MF_COUNT_INCREASED for valid testing. [akpm@linux-foundation.org: s/&&/&/] Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Chen Gong <gong.chen@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Rafael Aquini authored
commit a0b54add upstream. Changes in commit a0b8cab3 ("mm: remove lru parameter from __pagevec_lru_add and remove parts of pagevec API") have introduced a call to add_to_page_cache_lru() which causes a leak in nfs_symlink() as now the page gets an extra refcount that is not dropped. Jan Stancek observed and reported the leak effect while running test8 from Connectathon Testsuite. After several iterations over the test case, which creates several symlinks on a NFS mountpoint, the test system was quickly getting into an out-of-memory scenario. This patch fixes the page leak by dropping that extra refcount add_to_page_cache_lru() is grabbing. Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Eric W. Biederman authored
commit 96c7a2ff upstream. Recently due to a spike in connections per second memcached on 3 separate boxes triggered the OOM killer from accept. At the time the OOM killer was triggered there was 4GB out of 36GB free in zone 1. The problem was that alloc_fdtable was allocating an order 3 page (32KiB) to hold a bitmap, and there was sufficient fragmentation that the largest page available was 8KiB. I find the logic that PAGE_ALLOC_COSTLY_ORDER can't fail pretty dubious but I do agree that order 3 allocations are very likely to succeed. There are always pathologies where order > 0 allocations can fail when there are copious amounts of free memory available. Using the pigeon hole principle it is easy to show that it requires 1 page more than 50% of the pages being free to guarantee an order 1 (8KiB) allocation will succeed, 1 page more than 75% of the pages being free to guarantee an order 2 (16KiB) allocation will succeed and 1 page more than 87.5% of the pages being free to guarantee an order 3 allocate will succeed. A server churning memory with a lot of small requests and replies like memcached is a common case that if anything can will skew the odds against large pages being available. Therefore let's not give external applications a practical way to kill linux server applications, and specify __GFP_NORETRY to the kmalloc in alloc_fdmem. Unless I am misreading the code and by the time the code reaches should_alloc_retry in __alloc_pages_slowpath (where __GFP_NORETRY becomes signification). We have already tried everything reasonable to allocate a page and the only thing left to do is wait. So not waiting and falling back to vmalloc immediately seems like the reasonable thing to do even if there wasn't a chance of triggering the OOM killer. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Cong Wang <cwang@twopensource.com> Signed-off-by:
-
David Vrabel authored
commit 36613717 upstream. Backend drivers shouldn't transistion to CLOSED unless the frontend is CLOSED. If a backend does transition to CLOSED too soon then the frontend may not see the CLOSING state and will not properly shutdown. So, treat an unexpected backend CLOSED state the same as CLOSING. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Mel Gorman authored
commit a9c8e4be upstream. Steven Noonan forwarded a users report where they had a problem starting vsftpd on a Xen paravirtualized guest, with this in dmesg: BUG: Bad page map in process vsftpd pte:8000000493b88165 pmd:e9cc01067 page:ffffea00124ee200 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x2ffc0000000014(referenced|dirty) addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping: (null) index:7f97eea74 CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1 Call Trace: dump_stack+0x45/0x56 print_bad_pte+0x22e/0x250 unmap_single_vma+0x583/0x890 unmap_vmas+0x65/0x90 exit_mmap+0xc5/0x170 mmput+0x65/0x100 do_exit+0x393/0x9e0 do_group_exit+0xcc/0x140 SyS_exit_group+0x14/0x20 system_call_fastpath+0x1a/0x1f Disabling lock debugging due to kernel taint BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1 BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1 The issue could not be reproduced under an HVM instance with the same kernel, so it appears to be exclusive to paravirtual Xen guests. He bisected the problem to commit 1667918b ("mm: numa: clear numa hinting information on mprotect") that was also included in 3.12-stable. The problem was related to how xen translates ptes because it was not accounting for the _PAGE_NUMA bit. This patch splits pte_present to add a pteval_present helper for use by xen so both bare metal and xen use the same code when checking if a PTE is present. [mgorman@suse.de: wrote changelog, proposed minor modifications] [akpm@linux-foundation.org: fix typo in comment] Reported-by:
Steven Noonan <steven@uplinklabs.net> Tested-by:
Elena Ufimtseva <ufimtseva@gmail.com> Signed-off-by:
-
- 20 Feb, 2014 32 commits
-
-
Greg Kroah-Hartman authored
-
Stanislaw Gruszka authored
commit 7b320cb1 upstream. We have few fedora bug reports about list corruption on pinctrl, for example: https://bugzilla.redhat.com/show_bug.cgi?id=1051918 Most likely corruption happen due lack of protection of pinctrl_list when adding new nodes to it. Patch corrects that. Fixes: 42fed7ba ("pinctrl: move subsystem mutex to pinctrl_dev struct") Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Tony Prisk authored
commit f17248ed upstream. Due to an assumption in the VT8500 pinctrl driver, the value passed from devicetree for 'wm,pull' was not explicitly translated before being passed to pinconf. Since v3.10, changes to 'enum pin_config_param', PIN_CONFIG_BIAS_PULL_(UP/DOWN) no longer map 1-to-1 with the expected values in devicetree. This patch adds a small translation between the devicetree values (0..2) and the enum pin_config_param equivalent values. Signed-off-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Nicolas Ferre authored
commit b0dcfd87 upstream. When setting the gpio irq type, use the __irq_set_handler_locked() variant instead of the irq_set_handler() to prevent false spinlock recursion warning. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Nitin A Kamble authored
commit 923fa4ea upstream. The generic_chip.c uses interfaces from irq_domain.c which is controlled by the IRQ_DOMAIN config option, but there is no Kconfig dependency so the build can fail: linux/kernel/irq/generic-chip.c:400:11: error: 'irq_domain_xlate_onetwocell' undeclared here (not in a function) Select IRQ_DOMAIN when GENERIC_IRQ_CHIP is selected. Signed-off-by:
Nitin A Kamble <nitin.a.kamble@intel.com> Link: http://lkml.kernel.org/r/1391129410-54548-2-git-send-email-nitin.a.kamble@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Peter Oberparleiter authored
commit 6583327c upstream. Commit d61931d8, "x86: Add optimized popcnt variants" introduced compile flag -fcall-saved-rdi for lib/hweight.c. When combined with options -fprofile-arcs and -O2, this flag causes gcc to generate broken constructor code. As a result, a 64 bit x86 kernel compiled with CONFIG_GCOV_PROFILE_ALL=y prints message "gcov: could not create file" and runs into sproadic BUGs during boot. The gcc people indicate that these kinds of problems are endemic when using ad hoc calling conventions. It is therefore best to treat any file compiled with ad hoc calling conventions as an isolated environment and avoid things like profiling or coverage analysis, since those subsystems assume a "normal" calling conventions. This patch avoids the bug by excluding lib/hweight.o from coverage profiling. Reported-by:
Meelis Roos <mroos@linux.ee> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/52F3A30C.7050205@linux.vnet.ibm.comSigned-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Hans Verkuil authored
commit cca36e2e upstream. This reverts commit a242f426. That commit actually caused deadlocks, rather then fixing them. If ext_lock is set to NULL (otherwise videobuf_queue_lock doesn't do anything), then you get this deadlock: The driver's mmap function calls videobuf_mmap_mapper which calls videobuf_queue_lock on q. videobuf_mmap_mapper calls __videobuf_mmap_mapper, __videobuf_mmap_mapper calls videobuf_vm_open and videobuf_vm_open calls videobuf_queue_lock on q (introduced by above patch): deadlocked. This affects drivers using dma-contig and dma-vmalloc. Only dma-sg is not affected since it doesn't call videobuf_vm_open from __videobuf_mmap_mapper. Most drivers these days have a non-NULL ext_lock. Those that still use NULL there are all fairly obscure drivers, which is why this hasn't been seen earlier. Since everything worked perfectly fine for many years I prefer to just revert this patch rather than trying to fix it. videobuf is quite fragile and I rather not touch it too much. Work is (slowly) progressing to move everything over to vb2 or at the very least use non-NULL ext_lock in videobuf. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Reported-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Dave Jones authored
commit 13e1b87c upstream. Fix the following build error: drivers/media/usb/dvb-usb-v2/ mxl111sf-tuner.h:72:9: error: expected ‘;’, ‘,’ or ‘)’ before ‘struct’ struct mxl111sf_tuner_config *cfg) Signed-off-by:
Dave Jones <davej@fedoraproject.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Dave Jones authored
commit 866e8d8a upstream. mxl111sf_read_reg takes an address of a variable to write to as an argument. drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.c:mxl111sf_config_pin_mux_modes passes several uninitialized stack variables to this routine, expecting them to be filled in. In the event that something unexpected happens when reading from the chip, we end up doing a pr_debug of the value passed in, revealing whatever garbage happened to be on the stack. Change the pr_debug to match what happens in the 'success' case, where we assign buf[1] to *data. Spotted with Coverity (Bugs 731910 through 731917) Signed-off-by:
-
Antti Palosaari authored
commit f2e4c5e0 upstream. Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2. Device is build upon IT9135 chipset. Tested-by:
Stefan Becker <schtefan@gmx.net> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Mel Gorman authored
commit f98b7a77 upstream. There was a large performance regression that was bisected to commit 611ae8e3 ("x86/tlb: enable tlb flush range support for x86"). This patch simply changes the default balance point between a local and global flush for IvyBridge. In the interest of allowing the tests to be reproduced, this patch was tested using mmtests 0.15 with the following configurations configs/config-global-dhp__tlbflush-performance configs/config-global-dhp__scheduler-performance configs/config-global-dhp__network-performance Results are from two machines Ivybridge 4 threads: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz Ivybridge 8 threads: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz Page fault microbenchmark showed nothing interesting. Ebizzy was configured to run multiple iterations and threads. Thread counts ranged from 1 to NR_CPUS*2. For each thread count, it ran 100 iterations and each iteration lasted 10 seconds. Ivybridge 4 threads 3.13.0-rc7 3.13.0-rc7 vanilla altshift-v3 Mean 1 6395.44 ( 0.00%) 6789.09 ( 6.16%) Mean 2 7012.85 ( 0.00%) 8052.16 ( 14.82%) Mean 3 6403.04 ( 0.00%) 6973.74 ( 8.91%) Mean 4 6135.32 ( 0.00%) 6582.33 ( 7.29%) Mean 5 6095.69 ( 0.00%) 6526.68 ( 7.07%) Mean 6 6114.33 ( 0.00%) 6416.64 ( 4.94%) Mean 7 6085.10 ( 0.00%) 6448.51 ( 5.97%) Mean 8 6120.62 ( 0.00%) 6462.97 ( 5.59%) Ivybridge 8 threads 3.13.0-rc7 3.13.0-rc7 vanilla altshift-v3 Mean 1 7336.65 ( 0.00%) 7787.02 ( 6.14%) Mean 2 8218.41 ( 0.00%) 9484.13 ( 15.40%) Mean 3 7973.62 ( 0.00%) 8922.01 ( 11.89%) Mean 4 7798.33 ( 0.00%) 8567.03 ( 9.86%) Mean 5 7158.72 ( 0.00%) 8214.23 ( 14.74%) Mean 6 6852.27 ( 0.00%) 7952.45 ( 16.06%) Mean 7 6774.65 ( 0.00%) 7536.35 ( 11.24%) Mean 8 6510.50 ( 0.00%) 6894.05 ( 5.89%) Mean 12 6182.90 ( 0.00%) 6661.29 ( 7.74%) Mean 16 6100.09 ( 0.00%) 6608.69 ( 8.34%) Ebizzy hits the worst case scenario for TLB range flushing every time and it shows for these Ivybridge CPUs at least that the default choice is a poor on. The patch addresses the problem. Next was a tlbflush microbenchmark written by Alex Shi at http://marc.info/?l=linux-kernel&m=133727348217113 . It measures access costs while the TLB is being flushed. The expectation is that if there are always full TLB flushes that the benchmark would suffer and it benefits from range flushing There are 320 iterations of the test per thread count. The number of entries is randomly selected with a min of 1 and max of 512. To ensure a reasonably even spread of entries, the full range is broken up into 8 sections and a random number selected within that section. iteration 1, random number between 0-64 iteration 2, random number between 64-128 etc This is still a very weak methodology. When you do not know what are typical ranges, random is a reasonable choice but it can be easily argued that the opimisation was for smaller ranges and an even spread is not representative of any workload that matters. To improve this, we'd need to know the probability distribution of TLB flush range sizes for a set of workloads that are considered "common", build a synthetic trace and feed that into this benchmark. Even that is not perfect because it would not account for the time between flushes but there are limits of what can be reasonably done and still be doing something useful. If a representative synthetic trace is provided then this benchmark could be revisited and the shift values retuned. Ivybridge 4 threads 3.13.0-rc7 3.13.0-rc7 vanilla altshift-v3 Mean 1 10.50 ( 0.00%) 10.50 ( 0.03%) Mean 2 17.59 ( 0.00%) 17.18 ( 2.34%) Mean 3 22.98 ( 0.00%) 21.74 ( 5.41%) Mean 5 47.13 ( 0.00%) 46.23 ( 1.92%) Mean 8 43.30 ( 0.00%) 42.56 ( 1.72%) Ivybridge 8 threads 3.13.0-rc7 3.13.0-rc7 vanilla altshift-v3 Mean 1 9.45 ( 0.00%) 9.36 ( 0.93%) Mean 2 9.37 ( 0.00%) 9.70 ( -3.54%) Mean 3 9.36 ( 0.00%) 9.29 ( 0.70%) Mean 5 14.49 ( 0.00%) 15.04 ( -3.75%) Mean 8 41.08 ( 0.00%) 38.73 ( 5.71%) Mean 13 32.04 ( 0.00%) 31.24 ( 2.49%) Mean 16 40.05 ( 0.00%) 39.04 ( 2.51%) For both CPUs, average access time is reduced which is good as this is the benchmark that was used to tune the shift values in the first place albeit it is now known *how* the benchmark was used. The scheduler benchmarks were somewhat inconclusive. They showed gains and losses and makes me reconsider how stable those benchmarks really are or if something else might be interfering with the test results recently. Network benchmarks were inconclusive. Almost all results were flat except for netperf-udp tests on the 4 thread machine. These results were unstable and showed large variations between reboots. It is unknown if this is a recent problems but I've noticed before that netperf-udp results tend to vary. Based on these results, changing the default for Ivybridge seems like a logical choice. Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Reviewed-by:
Alex Shi <alex.shi@linaro.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
KOSAKI Motohiro authored
commit 227d53b3 upstream. To use spin_{un}lock_irq is dangerous if caller disabled interrupt. During aio buffer migration, we have a possibility to see the following call stack. aio_migratepage [disable interrupt] migrate_page_copy clear_page_dirty_for_io set_page_dirty __set_page_dirty_buffers __set_page_dirty spin_lock_irq This mean, current aio migration is a deadlockable. spin_lock_irqsave is a safer alternative and we should use it. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: David Rientjes rientjes@google.com> Signed-off-by:
-
KOSAKI Motohiro authored
commit a85d9df1 upstream. During aio stress test, we observed the following lockdep warning. This mean AIO+numa_balancing is currently deadlockable. The problem is, aio_migratepage disable interrupt, but __set_page_dirty_nobuffers unintentionally enable it again. Generally, all helper function should use spin_lock_irqsave() instead of spin_lock_irq() because they don't know caller at all. other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&ctx->completion_lock)->rlock); <Interrupt> lock(&(&ctx->completion_lock)->rlock); *** DEADLOCK *** dump_stack+0x19/0x1b print_usage_bug+0x1f7/0x208 mark_lock+0x21d/0x2a0 mark_held_locks+0xb9/0x140 trace_hardirqs_on_caller+0x105/0x1d0 trace_hardirqs_on+0xd/0x10 _raw_spin_unlock_irq+0x2c/0x50 __set_page_dirty_nobuffers+0x8c/0xf0 migrate_page_copy+0x434/0x540 aio_migratepage+0xb1/0x140 move_to_new_page+0x7d/0x230 migrate_pages+0x5e5/0x700 migrate_misplaced_page+0xbc/0xf0 do_numa_page+0x102/0x190 handle_pte_fault+0x241/0x970 handle_mm_fault+0x265/0x370 __do_page_fault+0x172/0x5a0 do_page_fault+0x1a/0x70 page_fault+0x28/0x30 Signed-off-by:
-
Weijie Yang authored
commit f893ab41 upstream. swapoff clear swap_info's SWP_USED flag prematurely and free its resources after that. A concurrent swapon will reuse this swap_info while its previous resources are not cleared completely. These late freed resources are: - p->percpu_cluster - swap_cgroup_ctrl[type] - block_device setting - inode->i_flags &= ~S_SWAPFILE This patch clears the SWP_USED flag after all its resources are freed, so that swapon can reuse this swap_info by alloc_swap_info() safely. [akpm@linux-foundation.org: tidy up code comment] Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Takashi Iwai authored
commit 276ab336 upstream. AD1983 has flexible loopback routes and the generic parser would take wrong path confusingly instead of taking individual paths via NID 0x0c and 0x0d. For avoiding it, limit the connections at these widgets so that the parser can think more straightforwardly. This fixes the regression of the missing line-in loopback on Dell machine. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit c7579fed upstream. The mixer widget on AD1983 at NID 0x0e was missing in the commit [f2f8be43: ALSA: hda - Add aamix NID to AD codecs]. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011Signed-off-by:
-
Takashi Iwai authored
commit 4528eb19 upstream. Toshiba Satellite L40 with AD1986A codec requires the EAPD of NID 0x1b to be constantly on, otherwise the output doesn't work. Unlike most of other AD1986A machines, EAPD is correctly implemented in HD-audio manner (that is, bit set = amp on), so we need to clear the inv_eapd flag in the fixup, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=67481Signed-off-by:
-
Takashi Iwai authored
commit c20f31ec upstream. Mac Pro 1,1 with ALC889A codec needs the VREF setup on NID 0x18 to VREF50, in order to make the speaker working. The same fixup was already needed for MacBook Air 1,1, so we can reuse it. Reported-by:
Nicolai Beuermann <mail@nico-beuermann.de> Signed-off-by:
-
Takashi Iwai authored
commit 4fa71c15 upstream. The commit 44dcbbb1 introduced the usage of bitreverse helpers but forgot to add the dependency. This patch adds the selection for CONFIG_BITREVERSE. Fixes: 44dcbbb1 ('ALSA: snd-usb: add support for bit-reversed byte formats') Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Vinayak Kale authored
commit 5044bad4 upstream. Add DSB after icache flush to complete the cache maintenance operation. The function __flush_icache_all() is used only for user space mappings and an ISB is not required because of an exception return before executing user instructions. An exception return would behave like an ISB. Signed-off-by:
Vinayak Kale <vkale@apm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Nathan Lynch authored
commit 069b9186 upstream. When __kernel_clock_gettime is called with a CLOCK_MONOTONIC_COARSE or CLOCK_REALTIME_COARSE clock id, it returns incorrectly to whatever the caller has placed in x2 ("ret x2" to return from the fast path). Fix this by saving x30/LR to x2 only in code that will call __do_get_tspec, restoring x30 afterward, and using a plain "ret" to return from the routine. Also: while the resulting tv_nsec value for CLOCK_REALTIME and CLOCK_MONOTONIC must be computed using intermediate values that are left-shifted by cs_shift (x12, set by __do_get_tspec), the results for coarse clocks should be calculated using unshifted values (xtime_coarse_nsec is in units of actual nanoseconds). The current code shifts intermediate values by x12 unconditionally, but x12 is uninitialized when servicing a coarse clock. Fix this by setting x12 to 0 once we know we are dealing with a coarse clock id. Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Acked-by:
-
Catalin Marinas authored
commit a55f9929 upstream. With the 64K page size configuration, __create_page_tables in head.S maps enough memory to get started but using 64K pages rather than 512M sections with a single pgd/pud/pmd entry pointing to a pte table. create_mapping() may override the pgd/pud/pmd table entry with a block (section) one if the RAM size is more than 512MB and aligned correctly. For the end of this block to be accessible, the old TLB entry must be invalidated. Reported-by:
Mark Salter <msalter@redhat.com> Tested-by:
-
Will Deacon authored
commit 40507403 upstream. Whilst the text segment for our VDSO is marked as PT_LOAD in the ELF headers, it is mapped by the kernel and not actually subject to demand-paging. ld doesn't realise this, and emits a p_align field of 64k (the maximum supported page size), which conflicts with the load address picked by the kernel on 4k systems, which will be 4k aligned. This causes GDB to fail with "Failed to read a valid object file image from memory" when attempting to load the VDSO. This patch passes the -n option to ld, which prevents it from aligning PT_LOAD segments to the maximum page size. Reported-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
-
Nathan Lynch authored
commit d4022a33 upstream. Update wall-to-monotonic fields in the VDSO data page unconditionally. These are used to service CLOCK_MONOTONIC_COARSE, which is not guarded by use_syscall. Signed-off-by:
-
Lior Amsalem authored
commit a6f089e9 upstream. In the Armada 370/XP driver, when we receive an IRQ 0, we read the list of doorbells that caused the interrupt from register ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS. This gives the list of IPIs that were generated. However, instead of acknowledging only the IPIs that were generated, we acknowledge *all* the IPIs, by writing ~IPI_DOORBELL_MASK in the ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register. This creates a race condition: if a new IPI that isn't part of the ones read into the temporary "ipimask" variable is fired before we acknowledge all IPIs, then we will simply loose it. This is causing scheduling hangs on SMP intensive workloads. It is important to mention that this ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register has the following behavior: "A CPU write of 0 clears the bits in this field. A CPU write of 1 has no effect". This is what allows us to simply write ~ipimask to acknoledge the handled IPIs. Notice that the same problem is present in the MSI implementation, but it will be fixed as a separate patch, so that this IPI fix can be pushed to older stable versions as appropriate (all the way to 3.8), while the MSI code only appeared in 3.13. Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 344e873e 'arm: mvebu: Add IPI support via doorbells' Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Trond Myklebust authored
commit 17ead6c8 upstream. nfs41_wake_and_assign_slot() relies on the task->tk_msg.rpc_argp and task->tk_msg.rpc_resp always pointing to the session sequence arguments. nfs4_proc_open_confirm tries to pull a fast one by reusing the open sequence structure, thus causing corruption of the NFSv4 slot table. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 20b9a902 upstream. There may still be timers active on the session waitqueues. Make sure that we kill them before freeing the memory. Signed-off-by:
-
Harald Freudenberger authored
commit ee97dc7d upstream. In s390 des and 3des ctr mode there is one preallocated page used to speed up the en/decryption. This page is not protected against concurrent usage and thus there is a potential of data corruption with multiple threads. The fix introduces locking/unlocking the ctr page and a slower fallback solution at concurrency situations. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Harald Freudenberger authored
commit adc3fcf1 upstream. In s390 des and des3_ede cbc mode the iv value is not protected against concurrency access and modifications from another running en/decrypt operation which is using the very same tfm struct instance. This fix copies the iv to the local stack before the crypto operation and stores the value back when done. Signed-off-by:
-
Harald Freudenberger authored
commit 0519e9ad upstream. The aes-ctr mode uses one preallocated page without any concurrency protection. When multiple threads run aes-ctr encryption or decryption this can lead to data corruption. The patch introduces locking for the page and a fallback solution with slower en/decryption performance in concurrency situations. Signed-off-by:
-
Josef Bacik authored
commit 8101c8db upstream. It's just broken and it's taking a lot of effort to fix it, so for now just disable it so people can defrag in peace. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Stephen Smalley authored
commit 2172fa70 upstream. Setting an empty security context (length=0) on a file will lead to incorrectly dereferencing the type and other fields of the security context structure, yielding a kernel BUG. As a zero-length security context is never valid, just reject all such security contexts whether coming from userspace via setxattr or coming from the filesystem upon a getxattr request by SELinux. Setting a security context value (empty or otherwise) unknown to SELinux in the first place is only possible for a root process (CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only if the corresponding SELinux mac_admin permission is also granted to the domain by policy. In Fedora policies, this is only allowed for specific domains such as livecd for setting down security contexts that are not defined in the build host policy. Reproducer: su setenforce 0 touch foo setfattr -n security.selinux foo Caveat: Relabeling or removing foo after doing the above may not be possible without booting with SELinux disabled. Any subsequent access to foo after doing the above will also trigger the BUG. BUG output from Matthew Thode: [ 473.893141] ------------[ cut here ]------------ [ 473.962110] kernel BUG at security/selinux/ss/services.c:654! [ 473.995314] invalid opcode: 0000 [#6] SMP [ 474.027196] Modules linked in: [ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I 3.13.0-grsec #1 [ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti: ffff8805f50cd488 [ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246 [ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX: 0000000000000100 [ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI: ffff8805e8aaa000 [ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09: 0000000000000006 [ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12: 0000000000000006 [ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15: 0000000000000000 [ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000) knlGS:0000000000000000 [ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4: 00000000000207f0 [ 474.556058] Stack: [ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98 ffff8805f1190a40 [ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990 ffff8805e8aac860 [ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060 ffff8805c0ac3d94 [ 474.690461] Call Trace: [ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a [ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b [ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179 [ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4 [ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31 [ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e [ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22 [ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d [ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91 [ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b [ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30 [ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3 [ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b [ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48 8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7 75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8 [ 475.255884] RIP [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 475.296120] RSP <ffff8805c0ac3c38> [ 475.328734] ---[ end trace f076482e9d754adc ]--- Reported-by:
Matthew Thode <mthode@mthode.org> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
- 13 Feb, 2014 2 commits
-
-
Greg Kroah-Hartman authored
-
Adrian Hunter authored
commit 945be38c upstream. It is possible for chip->fixes to be null. Check before dereferencing it. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Chris Ball <chris@printf.net> Signed-off-by:
-
