Skip to content

L
linux
Switch branch/tag
  1. 18 Sep, 2015 20 commits
  3. 14 Sep, 2015 1 commit
    • Weilong Chen's avatar
      ipv6: add check for blackhole or prohibited entry in rt6_redire · 9a6fbaeb
      Weilong Chen authored 
      There's a check for ip6_null_entry, but it's not enough if the config
CONFIG_IPV6_MULTIPLE_TABLES is selected. Blackhole or prohibited entries
should also be ignored.

This path is for kernel before v3.6, as there's a commit b94f1c09
use icmpv6_notify() instead of rt6_redirect() and rt6_redirect has
been deleted.

The oops as follow:
    [exception RIP: do_raw_write_lock+12]
    RIP: ffffffff8122c42c  RSP: ffff880666e45820  RFLAGS: 00010282
    RAX: ffff8801207bffd8  RBX: 0000000000000018  RCX: 0000000000000000
    RDX: 0000000000000000  RSI: ffff880666e45898  RDI: 0000000000000018
    RBP: ffff880666e45830   R8: 000000000000001e   R9: 0000000006000000
    R10: ffff88011796b8a0  R11: 0000000000000004  R12: ffff88010391ed00
    R13: 0000000000000000  R14: ffff880666e45898  R15: ffff88011796b890
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    [ffff880666e45838] _raw_write_lock_bh at ffffffff81450b39
    [ffff880666e45858] __ip6_ins_rt at ffffffff813ed8c1
    [ffff880666e45888] ip6_ins_rt at ffffffff813eef58
    [ffff880666e458b8] rt6_redirect at ffffffff813f0b84
    [ffff880666e45958] ndisc_rcv at ffffffff813f95d8
    [ffff880666e45a08] icmpv6_rcv at ffffffff814000e8
    [ffff880666e45ae8] ip6_input_finish at ffffffff813e43bb
    [ffff880666e45b38] ip6_input at ffffffff813e4b08
    [ffff880666e45b68] ipv6_rcv at ffffffff813e4969
    [ffff880666e45bc8] __netif_receive_skb at ffffffff8135158a
    [ffff880666e45c38] dev_gro_receive at ffffffff81351cb0
    [ffff880666e45c78] napi_gro_receive at ffffffff81351fc5
    [ffff880666e45cb8] tg3_rx at ffffffffa0bfb354 [tg]
    [ffff880666e45d88] tg3_poll_work at ffffffffa0c07857 [tg]
    [ffff880666e45e18] tg3_poll_msix at ffffffffa0c07d1b [tg]
    [ffff880666e45e68] net_rx_action at ffffffff81352219
    [ffff880666e45ec8] __do_softirq at ffffffff8103e5a1
    [ffff880666e45f38] call_softirq at ffffffff81459c4c
    [ffff880666e45f50] do_softirq at ffffffff8100413d
    [ffff880666e45f80] do_IRQ at ffffffff81003cce
This happened when ip6_route_redirect found a rt which was set
blackhole, the rt had a NULL rt6i_table argument which is accessed by
__ip6_ins_rt() when trying to lock rt6i_table->tb6_lock caused a BUG:
"BUG: unable to handle kernel NULL pointer"
Signed-off-by: default avatarWeilong Chen <chenweilong@huawei.com>
      9a6fbaeb
  5. 19 Jun, 2015 19 commits
    • Zefan Li's avatar
      Linux 3.4.108 · cf1b3dad
      Zefan Li authored
      cf1b3dad
    • Ian Campbell's avatar
      xen: netback: read hotplug script once at start of day. · 366df578
      Ian Campbell authored 
      commit 31a41898 upstream.

When we come to tear things down in netback_remove() and generate the
uevent it is possible that the xenstore directory has already been
removed (details below).

In such cases netback_uevent() won't be able to read the hotplug
script and will write a xenstore error node.

A recent change to the hypervisor exposed this race such that we now
sometimes lose it (where apparently we didn't ever before).

Instead read the hotplug script configuration during setup and use it
for the lifetime of the backend device.

The apparently more obvious fix of moving the transition to
state=Closed in netback_remove() to after the uevent does not work
because it is possible that we are already in state=Closed (in
reaction to the guest having disconnected as it shutdown). Being
already in Closed means the toolstack is at liberty to start tearing
down the xenstore directories. In principal it might be possible to
arrange to unregister the device sooner (e.g on transition to Closing)
such that xenstore would still be there but this state machine is
fragile and prone to anger...

A modern Xen system only relies on the hotplug uevent for driver
domains, when the backend is in the same domain as the toolstack it
will run the necessary setup/teardown directly in the correct sequence
wrt xenstore changes.
Signed-off-by: default avatarIan Campbell <ian.campbell@citrix.com>
Acked-by: default avatarWei Liu <wei.liu2@citrix.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      366df578
    • Joonsoo Kim's avatar
      slub: refactoring unfreeze_partials() · e0483eb8
      Joonsoo Kim authored 
      commit 43d77867 upstream.

Current implementation of unfreeze_partials() is so complicated,
but benefit from it is insignificant. In addition many code in
do {} while loop have a bad influence to a fail rate of cmpxchg_double_slab.
Under current implementation which test status of cpu partial slab
and acquire list_lock in do {} while loop,
we don't need to acquire a list_lock and gain a little benefit
when front of the cpu partial slab is to be discarded, but this is a rare case.
In case that add_partial is performed and cmpxchg_double_slab is failed,
remove_partial should be called case by case.

I think that these are disadvantages of current implementation,
so I do refactoring unfreeze_partials().

Minimizing code in do {} while loop introduce a reduced fail rate
of cmpxchg_double_slab. Below is output of 'slabinfo -r kmalloc-256'
when './perf stat -r 33 hackbench 50 process 4000 > /dev/null' is done.

** before **
Cmpxchg_double Looping
------------------------
Locked Cmpxchg Double redos   182685
Unlocked Cmpxchg Double redos 0

** after **
Cmpxchg_double Looping
------------------------
Locked Cmpxchg Double redos   177995
Unlocked Cmpxchg Double redos 1

We can see cmpxchg_double_slab fail rate is improved slightly.

Bolow is output of './perf stat -r 30 hackbench 50 process 4000 > /dev/null'.

** before **
 Performance counter stats for './hackbench 50 process 4000' (30 runs):

     108517.190463 task-clock                #    7.926 CPUs utilized            ( +-  0.24% )
         2,919,550 context-switches          #    0.027 M/sec                    ( +-  3.07% )
           100,774 CPU-migrations            #    0.929 K/sec                    ( +-  4.72% )
           124,201 page-faults               #    0.001 M/sec                    ( +-  0.15% )
   401,500,234,387 cycles                    #    3.700 GHz                      ( +-  0.24% )
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
   250,576,913,354 instructions              #    0.62  insns per cycle          ( +-  0.13% )
    45,934,956,860 branches                  #  423.297 M/sec                    ( +-  0.14% )
       188,219,787 branch-misses             #    0.41% of all branches          ( +-  0.56% )

      13.691837307 seconds time elapsed                                          ( +-  0.24% )

** after **
 Performance counter stats for './hackbench 50 process 4000' (30 runs):

     107784.479767 task-clock                #    7.928 CPUs utilized            ( +-  0.22% )
         2,834,781 context-switches          #    0.026 M/sec                    ( +-  2.33% )
            93,083 CPU-migrations            #    0.864 K/sec                    ( +-  3.45% )
           123,967 page-faults               #    0.001 M/sec                    ( +-  0.15% )
   398,781,421,836 cycles                    #    3.700 GHz                      ( +-  0.22% )
   <not supported> stalled-cycles-frontend
   <not supported> stalled-cycles-backend
   250,189,160,419 instructions              #    0.63  insns per cycle          ( +-  0.09% )
    45,855,370,128 branches                  #  425.436 M/sec                    ( +-  0.10% )
       169,881,248 branch-misses             #    0.37% of all branches          ( +-  0.43% )

      13.596272341 seconds time elapsed                                          ( +-  0.22% )

No regression is found, but rather we can see slightly better result.
Acked-by: default avatarChristoph Lameter <cl@linux.com>
Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
Signed-off-by: default avatarPekka Enberg <penberg@kernel.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      e0483eb8
    • Ben Hutchings's avatar
      xen-pciback: Add name prefix to global 'permissive' variable · cb990484
      Ben Hutchings authored 
      commit 8014bcc8 upstream.

The variable for the 'permissive' module parameter used to be static
but was recently changed to be extern.  This puts it in the kernel
global namespace if the driver is built-in, so its name should begin
with a prefix identifying the driver.
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
Fixes: af6fc858 ("xen-pciback: limit guest control of command register")
Signed-off-by: default avatarDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      cb990484
    • Tejun Heo's avatar
      writeback: use |1 instead of +1 to protect against div by zero · c905f0af
      Tejun Heo authored 
      commit 464d1387 upstream.

mm/page-writeback.c has several places where 1 is added to the divisor
to prevent division by zero exceptions; however, if the original
divisor is equivalent to -1, adding 1 leads to division by zero.

There are three places where +1 is used for this purpose - one in
pos_ratio_polynom() and two in bdi_position_ratio().  The second one
in bdi_position_ratio() actually triggered div-by-zero oops on a
machine running a 3.10 kernel.  The divisor is

  x_intercept - bdi_setpoint + 1 == span + 1

span is confirmed to be (u32)-1.  It isn't clear how it ended up that
but it could be from write bandwidth calculation underflow fixed by
c72efb65 ("writeback: fix possible underflow in write bandwidth
calculation").

At any rate, +1 isn't a proper protection against div-by-zero.  This
patch converts all +1 protections to |1.  Note that
bdi_update_dirty_ratelimit() was already using |1 before this patch.
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
[lizf: Backported to 3.4: drop other two changes as there's only one
 such statment in 3.4]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      c905f0af
    • Yann Droneaud's avatar
      IB/core: don't disallow registering region starting at 0x0 · 397c6496
      Yann Droneaud authored 
      commit 66578b0b upstream.

In a call to ib_umem_get(), if address is 0x0 and size is
already page aligned, check added in commit 8494057a
("IB/uverbs: Prevent integer overflow in ib_umem_get address
arithmetic") will refuse to register a memory region that
could otherwise be valid (provided vm.mmap_min_addr sysctl
and mmap_low_allowed SELinux knobs allow userspace to map
something at address 0x0).

This patch allows back such registration: ib_umem_get()
should probably don't care of the base address provided it
can be pinned with get_user_pages().

There's two possible overflows, in (addr + size) and in
PAGE_ALIGN(addr + size), this patch keep ensuring none
of them happen while allowing to pin memory at address
0x0. Anyway, the case of size equal 0 is no more (partially)
handled as 0-length memory region are disallowed by an
earlier check.

Link: http://mid.gmane.org/cover.1428929103.git.ydroneaud@opteya.com
Cc: Shachar Raindel <raindel@mellanox.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: default avatarYann Droneaud <ydroneaud@opteya.com>
Reviewed-by: default avatarSagi Grimberg <sagig@mellanox.com>
Reviewed-by: default avatarHaggai Eran <haggaie@mellanox.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      397c6496
    • Quentin Casasnovas's avatar
      cdc-acm: prevent infinite loop when parsing CDC headers. · b383c48a
      Quentin Casasnovas authored 
      commit 0d3bba02 upstream.

Phil and I found out a problem with commit:

  7e860a6e ("cdc-acm: add sanity checks")

It added some sanity checks to ignore potential garbage in CDC headers but
also introduced a potential infinite loop.  This can happen at the first
loop iteration (elength = 0 in that case) if the description isn't a
DT_CS_INTERFACE or later if 'buffer[0]' is zero.

It should also be noted that the wrong length was being added to 'buffer'
in case 'buffer[1]' was not a DT_CS_INTERFACE descriptor, since elength was
assigned after that check in the loop.

A specially crafted USB device could be used to trigger this infinite loop.

Fixes: 7e860a6e ("cdc-acm: add sanity checks")
Signed-off-by: default avatarPhil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: default avatarQuentin Casasnovas <quentin.casasnovas@oracle.com>
CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: Adam Lee <adam8157@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      b383c48a
    • Al Viro's avatar
      don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu() · 981889fb
      Al Viro authored 
      commit 7bd88377 upstream.

return the value instead, and have path_init() do the assignment.  Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination.  This one should go where
it went.

To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers.  And do the same to set_root(), to keep them
in sync.
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
[lizf: the previous backport of this upstream commit is buggy. fix it]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      981889fb
    • Yinghai Lu's avatar
      PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev · bded67cc
      Yinghai Lu authored 
      commit fc279850 upstream.

These interfaces:

  pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region)

took a pci_dev, but they really depend only on the pci_bus.  And we want to
use them in resource allocation paths where we have the bus but not a
device, so this patch converts them to take the pci_bus instead of the
pci_dev:

  pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region)

In fact, with standard PCI-PCI bridges, they only depend on the host
bridge, because that's the only place address translation occurs, but
we aren't going that far yet.

[bhelgaas: changelog]
Signed-off-by: default avatarYinghai Lu <yinghai@kernel.org>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Cc: Dirk Behme <dirk.behme@gmail.com>
[lizf: Backported to 3.4:
 - make changes to pci_host_bridge() instead of find_pci_root_bus()
 - adjust context]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      bded67cc
    • Konrad Rzeszutek Wilk's avatar
      config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected · edf76233
      Konrad Rzeszutek Wilk authored 
      commit a6dfa128 upstream.

A huge amount of NIC drivers use the DMA API, however if
compiled under 32-bit an very important part of the DMA API can
be ommitted leading to the drivers not working at all
(especially if used with 'swiotlb=force iommu=soft').

As Prashant Sreedharan explains it: "the driver [tg3] uses
DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of
the dma "mapping" and dma_unmap_addr() to get the "mapping"
value. On most of the platforms this is a no-op, but ... with
"iommu=soft and swiotlb=force" this house keeping is required,
... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_
instead of the DMA address."

As such enable this even when using 32-bit kernels.
Reported-by: default avatarIan Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
Acked-by: default avatarPrashant Sreedharan <prashant@broadcom.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: cascardo@linux.vnet.ibm.com
Cc: david.vrabel@citrix.com
Cc: sanjeevb@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: vyasevich@gmail.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      edf76233
    • Kirill A. Shutemov's avatar
      perf tools: Fix build with perl 5.18 · db5a0101
      Kirill A. Shutemov authored 
      commit 575bf1d0 upstream.

perl.h from new Perl release doesn't like -Wundef and -Wswitch-default:

/usr/lib/perl5/core_perl/CORE/perl.h:548:5: error: "SILENT_NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if SILENT_NO_TAINT_SUPPORT && !defined(NO_TAINT_SUPPORT)
     ^
/usr/lib/perl5/core_perl/CORE/perl.h:556:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3471:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/sv.h:1455:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/perl.h:3472:0,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/regexp.h:436:5: error: "NO_TAINT_SUPPORT" is not defined [-Werror=undef]
 #if NO_TAINT_SUPPORT
     ^
In file included from /usr/lib/perl5/core_perl/CORE/hv.h:592:0,
                 from /usr/lib/perl5/core_perl/CORE/perl.h:3480,
                 from util/scripting-engines/trace-event-perl.c:30:
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_siphash_2_4’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:222:3: error: switch missing default case [-Werror=switch-default]
   switch( left )
   ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_superfast’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:274:5: error: switch missing default case [-Werror=switch-default]
     switch (rem) { \
     ^
/usr/lib/perl5/core_perl/CORE/hv_func.h: In function ‘S_perl_hash_murmur3’:
/usr/lib/perl5/core_perl/CORE/hv_func.h:398:5: error: switch missing default case [-Werror=switch-default]
     switch(bytes_in_carry) { /* how many bytes in carry */
     ^

Let's disable the warnings for code which uses perl.h.
Signed-off-by: default avatarKirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372063394-20126-1-git-send-email-kirill@shutemov.nameSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Vinson Lee <vlee@twopensource.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      db5a0101
    • hujianyang's avatar
      UBI: fix soft lockup in ubi_check_volume() · 9f03e834
      hujianyang authored 
      commit 9aa272b4 upstream.

Running mtd-utils/tests/ubi-tests/io_basic.c could cause
soft lockup or watchdog reset. It is because *updatevol*
will perform ubi_check_volume() after updating finish
and this function will full scan the updated lebs if the
volume is initialized as STATIC_VOLUME.

This patch adds *cond_resched()* in the loop of lebs scan
to avoid soft lockup.

Helped by Richard Weinberger <richard@nod.at>

[ 2158.067096] INFO: rcu_sched self-detected stall on CPU { 1}  (t=2101 jiffies g=1606 c=1605 q=56)
[ 2158.172867] CPU: 1 PID: 2073 Comm: io_basic Tainted: G           O 3.10.53 #21
[ 2158.172898] [<c000f624>] (unwind_backtrace+0x0/0x120) from [<c000c294>] (show_stack+0x10/0x14)
[ 2158.172918] [<c000c294>] (show_stack+0x10/0x14) from [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660)
[ 2158.172936] [<c008ac3c>] (rcu_check_callbacks+0x1c0/0x660) from [<c002b480>] (update_process_times+0x38/0x64)
[ 2158.172953] [<c002b480>] (update_process_times+0x38/0x64) from [<c005ff38>] (tick_sched_handle+0x54/0x60)
[ 2158.172966] [<c005ff38>] (tick_sched_handle+0x54/0x60) from [<c00601ac>] (tick_sched_timer+0x44/0x74)
[ 2158.172978] [<c00601ac>] (tick_sched_timer+0x44/0x74) from [<c003f348>] (__run_hrtimer+0xc8/0x1b8)
[ 2158.172992] [<c003f348>] (__run_hrtimer+0xc8/0x1b8) from [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4)
[ 2158.173007] [<c003fd9c>] (hrtimer_interrupt+0x128/0x2a4) from [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30)
[ 2158.173022] [<c0246f1c>] (arch_timer_handler_virt+0x28/0x30) from [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124)
[ 2158.173036] [<c0086214>] (handle_percpu_devid_irq+0x9c/0x124) from [<c0082bd8>] (generic_handle_irq+0x20/0x30)
[ 2158.173049] [<c0082bd8>] (generic_handle_irq+0x20/0x30) from [<c000969c>] (handle_IRQ+0x64/0x8c)
[ 2158.173060] [<c000969c>] (handle_IRQ+0x64/0x8c) from [<c0008544>] (gic_handle_irq+0x3c/0x60)
[ 2158.173074] [<c0008544>] (gic_handle_irq+0x3c/0x60) from [<c02f0f80>] (__irq_svc+0x40/0x50)
[ 2158.173083] Exception stack(0xc4043c98 to 0xc4043ce0)
[ 2158.173092] 3c80:                                                       c4043ce4 00000019
[ 2158.173102] 3ca0: 1f8a865f c050ad10 1f8a864c 00000031 c04b5970 0003ebce 00000000 f3550000
[ 2158.173113] 3cc0: bf00bc68 00000800 0003ebce c4043ce0 c0186d14 c0186cb8 80000013 ffffffff
[ 2158.173130] [<c02f0f80>] (__irq_svc+0x40/0x50) from [<c0186cb8>] (read_current_timer+0x4/0x38)
[ 2158.173145] [<c0186cb8>] (read_current_timer+0x4/0x38) from [<1f8a865f>] (0x1f8a865f)
[ 2183.927097] BUG: soft lockup - CPU#1 stuck for 22s! [io_basic:2073]
[ 2184.002229] Modules linked in: nandflash(O) [last unloaded: nandflash]
Signed-off-by: default avatarWang Kai <morgan.wang@huawei.com>
Signed-off-by: default avatarhujianyang <hujianyang@huawei.com>
Signed-off-by: default avatarRichard Weinberger <richard@nod.at>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      9f03e834
    • Sasha Levin's avatar
      autofs4: check dev ioctl size before allocating · a5822a08
      Sasha Levin authored 
      commit e53d77eb upstream.

There wasn't any check of the size passed from userspace before trying
to allocate the memory required.

This meant that userspace might request more space than allowed,
triggering an OOM.
Signed-off-by: default avatarSasha Levin <sasha.levin@oracle.com>
Signed-off-by: default avatarIan Kent <raven@themaw.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      a5822a08
    • Dan Carpenter's avatar
      ipvs: uninitialized data with IP_VS_IPV6 · 4dd86a6a
      Dan Carpenter authored 
      commit 3b05ac38 upstream.

The app_tcp_pkt_out() function expects "*diff" to be set and ends up
using uninitialized data if CONFIG_IP_VS_IPV6 is turned on.

The same issue is there in app_tcp_pkt_in().  Thanks to Julian Anastasov
for noticing that.
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Acked-by: default avatarJulian Anastasov <ja@ssi.bg>
Signed-off-by: default avatarSimon Horman <horms@verge.net.au>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      4dd86a6a
    • Florian Westphal's avatar
      net: make skb_gso_segment error handling more robust · 812fbfa1
      Florian Westphal authored 
      commit 330966e5 upstream.

skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL.  This can happen when GSO is used for header verification.

However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.

Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.

However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.

It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
[lizf: Backported to 3.4: drop some hunks as there are fewer skb_gso_segment()
 users in 3.4]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      812fbfa1
    • Pravin B Shelar's avatar
      openvswitch: Check currect return value from skb_gso_segment() · 4e237a3e
      Pravin B Shelar authored 
      commit 92e5dfc3 upstream.

Fix return check typo.
Signed-off-by: default avatarPravin B Shelar <pshelar@nicira.com>
Signed-off-by: default avatarJesse Gross <jesse@nicira.com>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      4e237a3e
    • Jann Horn's avatar
      fs: take i_mutex during prepare_binprm for set[ug]id executables · e661bb1c
      Jann Horn authored 
      commit 8b01fc86 upstream.

This prevents a race between chown() and execve(), where chowning a
setuid-user binary to root would momentarily make the binary setuid
root.

This patch was mostly written by Linus Torvalds.
Signed-off-by: default avatarJann Horn <jann@thejh.net>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
[lizf: Backported to 3.4:
 - adjust context
 - remove task_no_new_priv and user namespace stuff
 - open-code file_inode()
 - s/READ_ONCE/ACCESS_ONCE]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      e661bb1c
    • Tomas Henzl's avatar
      hpsa: fix memory leak in kdump hard reset · fcafa22d
      Tomas Henzl authored 
      commit 03741d95 upstream.

There is a potential memory leak in hpsa_kdump_hard_reset_controller.
Reviewed-by: default avatarDon Brace <don.brace@pmcs.com>
Reviewed-by: default avatarScott Teel <scott.teel@pmcs.com>
Signed-off-by: default avatarTomas Henzl <thenzl@redhat.com>
Signed-off-by: default avatarDon Brace <don.brace@pmcs.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      fcafa22d
    • Tomas Henzl's avatar
      hpsa: turn off interrupts when kdump starts · 52f70606
      Tomas Henzl authored 
      commit 3b747298 upstream.

Sometimes when the card is restarted it may cause -
"irq 16: nobody cared (try booting with the "irqpoll" option)"
that is likely caused so, that the card, after the hard reset
finishes, pulls on the irq. Disabling the ints before or after
the hpsa_kdump_hard_reset_controller fixes it.

At this point we can't know in which state the card is,
so using SA5_INTR_OFF + SA5_REPLY_INTR_MASK_OFFSET defines directly,
instead of the function the drivers provides, seems to be apropriate.
Reviewed-by: default avatarScott Teel <scott.teel@pmcs.com>
Signed-off-by: default avatarDon Brace <don.brace@pmcs.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Cc: Vinson Lee <vlee@twopensource.com>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: default avatarZefan Li <lizefan@huawei.com>
      52f70606
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7