- 10 Oct, 2007 40 commits
-
-
Arnaldo Carvalho de Melo authored
The code was too complicated, if p > 0 in ccid3_hc_tx_no_feedback_timer the timestamp was being obtained to be passed to ccid3_hc_tx_update_x, where only if p > 0 the timestamp was needed, so just leave it to ccid3_hc_tx_update_x to obtain the timestamp if needed. This will help in the upcoming changesets where we'll convert t_ld to ktime_t. We'll eventually try to reuse ktime_get_real() calls again. Signed-off-by:
Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
This patch introduces autotuning to the sctp buffer management code similar to the TCP. The buffer space can be grown if the advertised receive window still has room. This might happen if small message sizes are used, which is common in telecom environmens. New tunables are introduced that provide limits to buffer growth and memory pressure is entered if to much buffer spaces is used. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Jeff Garzik authored
Several get/set functions can be handled by a passing the ethtool_op function pointer directly to a generic function. This permits deletion of a fair bit of redundant code. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Jeff Garzik authored
Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by:Satyam Sharma <satyam@infradead.org> Acked-by:
Keiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for multiple targets, independent of CONFIG_NETCONSOLE_DYNAMIC -- this is useful even in the default case and (including the infrastructure introduced in previous patches) doesn't really add too many bytes to module text. All the complexity (and size) comes with the dynamic reconfigurability / userspace interface patch, and so it's plausible users may want to keep this enabled but that disabled (say to avoid a dependency on CONFIG_CONFIGFS_FS too). Also update documentation to mention the use of ";" separator to specify multiple logging targets in the boot/module option string. Brief overview: We maintain a target_list (and corresponding lock). Get rid of the static "default_target" and introduce allocation and release functions for our netconsole_target objects (but keeping sure to preserve previous behaviour such as default values). During init_netconsole(), ";" is used as the separator to identify multiple target specifications in the boot/module option string. The target specifications are parsed and netpolls setup. During exit, the target_list is torn down and all items released. Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. To update fields of underlying netpoll structure at runtime on corresponding NETDEV_CHANGEADDR or NETDEV_CHANGENAME notifications. ioctl(SIOCSIFHWADDR or SIOCSIFNAME) could be used to change the hardware/MAC address or name of the local interface that our netpoll is attached to. Whenever this happens, netdev notifier chain is called out with the NETDEV_CHANGEADDR or NETDEV_CHANGENAME event message. We respond to that and update the local_mac or dev_name field of the struct netpoll. This makes sense anyway, but is especially required for dynamic netconsole because the netpoll structure's internal members become user visible files when either sysfs or configfs are used. So this helps us to keep up with the MAC address/name changes and keep values in struct netpoll uptodate. [ Note that ioctl(SIOCSIFADDR) to change IP address of interface at runtime is not handled (to update local_ip of netpoll) on purpose -- some setups may set the local_ip to a private address, not necessary the actual IP address of the sender host, as presently allowed. ] Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Introduce a wrapper structure over netpoll to represent logging targets configured in netconsole. This will get extended with other members in further patches. This is done independent of the (to-be-introduced) NETCONSOLE_DYNAMIC config option so that we're able to drastically cut down on the #ifdef complexity of final netconsole.c. Also, struct netconsole_target would be required for multiple targets support also, and not just dynamic reconfigurability. Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Add some useful general-purpose tips. Also suggest solution for the frequent problem of console loglevel set too low numerically (i.e. for high priority messages only) on the sender. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Avoid unnecessarily disabling interrupts and calling netpoll_send_udp() if the corresponding local interface is not up. Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Presently, boot/module parameters are set up quite differently for the case of built-in netconsole (__setup() -> obsolete_checksetup() -> netpoll_parse_options() -> strlen(config) == 0 in init_netconsole()) vs modular netconsole (module_param_string() -> string copied to the config variable -> strlen(config) != 0 init_netconsole() -> netpoll_parse_options()). This patch makes both of them similar by doing exactly the equivalent of a module_param_string() in option_setup() also -- just copying the param string passed from the kernel command line into "config" variable. So, strlen(config) != 0 in both cases, and netpoll_parse_options() is always called from init_netconsole(), thus making the setup logic for both cases similar. Now, option_setup() is only ever called / used for the built-in case, so we put it inside a #ifndef MODULE, otherwise gcc will complain about option_setup() being "defined but not used". Also, the "configured" variable is redundant with this patch and hence removed. Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. The (!np.dev) check in write_msg() is bogus (always false), because: np.dev is set by netpoll_setup(), which is called by init_netconsole() before register_console(), so write_msg() cannot be triggered unless netpoll_setup() successfully set np.dev. Also np.dev cannot go away from under us, because netpoll_setup() grabs us reference on it. So let's remove the bogus check. Signed-off-by:
-
Satyam Sharma authored
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. (1) Remove unwanted headers. (2) Mark __init and __exit as appropriate. (3) Various trivial codingstyle and prettification stuff. Signed-off-by:
-
Stephen Hemminger authored
This patch converts the messy macro for MASK_PFX to inline function and expands TKEY_GET_MASK in the one place it is used. Signed-off-by:
-
Stephen Hemminger authored
Try this out: * replace macro's with inlines * get rid of places doing multiple evaluations of NODE_PARENT [akpm@linux-foundation.org: rcu_dereference wants an lval] Signed-off-by: -
Ilpo Järvinen authored
This stale info came from the original idea, which proved to be unnecessarily complex, sacked_out > 0 is easy to do and that when it's going to be needed anyway (it _can_ be valid also when sacked_out == 0 but there's not going to be a guarantee about it for now). Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Ilpo Järvinen authored
Previously code had IsReno/IsFack defined as macros that were local to tcp_input.c though sack_ok field has user elsewhere too for the same purpose. This changes them to static inlines as preferred according the current coding style and unifies the access to sack_ok across multiple files. Magic bitops of sack_ok for FACK and DSACK are also abstracted to functions with appropriate names. Note: - One sack_ok = 1 remains but that's self explanary, i.e., it enables sack - Couple of !IsReno cases are changed to tcp_is_sack - There were no users for IsDSack => I dropped it Signed-off-by:
-
Ilpo Järvinen authored
BUG_ON is an overkill. In fact, I was mislead by BUG_TRAP severity (equals to WARN_ON) which is much lower than BUG_ON's (that panics). Signed-off-by:
-
Ilpo Järvinen authored
Previously TCP had a transitional state during which reno counted segments that are already below the current window into sacked_out, which is now prevented. In addition, re-try now the unconditional S+L skb catching. This approach conservatively calls just remove_sack and leaves reset_sack() calls alone. The best solution to the whole problem would be to first calculate the new sacked_out fully (this patch does not move reno_sack_reset calls from original sites and thus does not implement this). However, that would require very invasive change to fastretrans_alert (perhaps even slicing it to two halves). Alternatively, all callers of tcp_packets_in_flight (i.e., users that depend on sacked_out) should be postponed until the new sacked_out has been calculated but it isn't any simpler alternative. Signed-off-by:
-
Ilpo Järvinen authored
This happens rather infrequently and is only possible during FRTO. We must not allow TCP to slip to Open state because tcp_fastretrans_alert might then not be called on it's time when FRTO has exited. This become a problem when left_out got removed and was replaced by just sacked_out. Signed-off-by:
-
Ilpo Järvinen authored
tcp_verify_left_out is useful for verifying S+L condition, so add it back to couple of places in where the code was not calling to tcp_sync_left_out but used own ad-hoc solution (before the tcp_sync_left_out got removed). Signed-off-by:
-
Ilpo Järvinen authored
Left_out was dropped a while ago, thus leaving verifying consistency of the "left out" as only task for the function in question. Thus make it's name more appropriate. In addition, it is intentionally converted to #define instead of static inline because the location of the invariant failure is the most important thing to have if this ever triggers. I think it would have been helpful e.g. in this case where the location of the failure point had to be based on some quesswork: http://lkml.org/lkml/2007/5/2/464 ...Luckily the guesswork seems to have proved to be correct. Signed-off-by: -
Ilpo Järvinen authored
tp->left_out got removed but nothing came to replace it back then (users just did addition by themselves), so add function for users now. Signed-off-by:
-
Ilpo Järvinen authored
It is easily calculable when needed and user are not that many after all. Signed-off-by:
-
Ilpo Järvinen authored
There is no need for such check in pkts_acked because the callback is not invoked unless at least one segment got fully ACKed (i.e., the snd_una moved past skb's end_seq) by the cumulative ACK's snd_una advancement. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
No other users exist for tcp_ecn.h. Very few things remain in tcp.h, for most TCP ECN functions callers reside within a single .c file and can be placed there. Signed-off-by:
-
Ilpo Järvinen authored
In addition, added a reference about the purpose of the loop. Signed-off-by:
-
Ilpo Järvinen authored
F-RTO does not touch SACKED_ACKED bits at all, so there is no need to recount them in tcp_enter_frto_loss. After removal of the else branch, nested ifs can be combined. This must also reset sacked_out when SACK is not in use as TCP could have received some duplicate ACKs prior RTO. To achieve that in a sane manner, tcp_reset_reno_sack was re-placed by the previous patch. Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Ilpo Järvinen authored
Stupid error from my side. Even though now that I noticed this, I hoped it would have been an optimization but no, the counter hint is then incorrect. Thus clearing is necessary for now (I still suspect though that this path is never executed). Signed-off-by:
-
Ilpo Järvinen authored
Signed-off-by:
-
Ilpo Järvinen authored
It is guaranteed to be valid only when !tp->sacked_out. In most cases this seqno is available in the last ACK but there is no guarantee for that. The new fast recovery loss marking algorithm needs this as entry point. Signed-off-by:
-
Thomas Graf authored
Currently neighbour event notifications are limited to update notifications and only sent if the ARP daemon is enabled. This patch extends the existing notification code by also reporting neighbours being removed due to gc or administratively and removes the dependency on the ARP daemon. This allows to keep track of neighbour states without periodically fetching the complete neighbour table. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Thomas Graf authored
Introduces neigh_cleanup_and_release() to be used after a neighbour has been removed from its neighbour table. Serves as preparation to add event notifications. Signed-off-by:
-
Andrew Gallatin authored
Singed off by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: -
Jan-Bernd Themann authored
Signed-off-by:
Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by:
-
