- 03 Sep, 2018 40 commits
-
-
Laurent Pinchart authored
Creating all the planes in a single location instead of creating them per-CRTC with remaining planes then created in a second step simplifies the logic. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The crtc_idx and plane_idw variables in the main loop are always equal to the loop counter i, use it instead. Don't unnecessarily initialize dssdev to NULL. Signed-off-by:
-
Laurent Pinchart authored
Regulators for the DPI, DSI, HDMI, SDI and VENC outputs are all looked up when connecting the output omap_dss_device. There's no need to delay regulator handling to that time, get the regulators at probe time. Signed-off-by:
-
Laurent Pinchart authored
The dss_mgr_connect() and dss_mgr_disconnect() functions take two omap_dss_device pointers as parameters, which are always set to the same value by all callers. Remove the duplicated pointer. Signed-off-by:
-
Laurent Pinchart authored
Add a new omapdss_display_get() function to retrieve the omap_dss_device for a given DSS output. This will be used when reversing the direction of the DSS pipeline handling logic. Signed-off-by:
-
Laurent Pinchart authored
Similarly to for_each_dss_display(), the for_each_dss_output() macro iterates over all the DSS connected outputs. Signed-off-by:
-
Laurent Pinchart authored
Look up the next dssdev at probe time based on device tree links for all DSS outputs and encoders. This will be used to reverse the order of the dssdev connect and disconnect call chains. Signed-off-by:
-
Laurent Pinchart authored
There's no reason to delay initialization of most of the driver (such as mapping memory I/O or enabling runtime PM) to the component bind handler. Perform as much of the initialization as possible at probe time, initializing at bind time only the parts that depends on the DSS. The cleanup code is moved from unbind to remove in a similar way. Signed-off-by:
-
Laurent Pinchart authored
There's no reason to delay initialization of most of the driver (such as mapping memory I/O or enabling runtime PM) to the component bind handler. Perform as much of the initialization as possible at probe time, initializing at bind time only the parts that depends on the DSS. The cleanup code is moved from unbind to remove in a similar way. Signed-off-by:
-
Laurent Pinchart authored
There's no reason to delay initialization of most of the driver (such as mapping memory I/O or enabling runtime PM) to the component bind handler. Perform as much of the initialization as possible at probe time, initializing at bind time only the parts that depends on the DSS. The cleanup code is moved from unbind to remove in a similar way. Signed-off-by:
-
Laurent Pinchart authored
There's no reason to delay initialization of most of the driver (such as mapping memory I/O or enabling runtime PM) to the component bind handler. Perform as much of the initialization as possible at probe time, initializing at bind time only the parts that depends on the DSS. The cleanup code is moved from unbind to remove in a similar way. Signed-off-by:
-
Laurent Pinchart authored
Rename the jump labels according to the cleanup they perform, not the location they're accessed from, and move functions from error checks to cleanup paths, and move reference handling to simplify cleanup. Signed-off-by:
-
Laurent Pinchart authored
The connect handle of the analog TV and HDMI connectors casts the dssdev to panel data only to then access fields of the panel data that are also present in the dssdev. Remove the cast and use dssdev directly. Signed-off-by:
-
Laurent Pinchart authored
The omapdss_of_find_source_for_first_ep() function locates the source corresponding to the first endpoint of the first port of a device node. We can easily extend it to locate sinks as well by passing the port number as a parameter. This will be useful to find sinks in encoders drivers. Extend the function and rename it to omapdss_of_find_connected_device() to reflect its new extended purpose. Additionally, it is useful to differentiate between failures to return the connected device because no link exists in the device tree for the requested port, or because the connected device as described in the device tree is invalid or not probed yet. Return NULL in the first case and an error code in the second case, and update the callers accordingly. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device port_num field stores the DT port number associated with the device. The field is used in different ways depending on the device type: - For DPI outputs, the port number is used as an identifier of the DPI instance - For sources, the port number is used to look up the omap_dss_device by DT port node As omap_dss_device instances are only looked up as sources by sinks, setting the field to the number of the source port works for both use cases. However, to enable looking up sinks, we need to record all the ports associated with an omap_dss_device. Do so by turning the port_num field into an of_ports bitmask. For DPI outputs the port number is additionally stored in the dpi_data structure as the output ID. Signed-off-by:
-
Laurent Pinchart authored
The omapdss_find_output_from_display() function is only used to retrieve the dispc channel corresponding to the display. Return the dispc channel directly, and rename the function to omapdss_device_get_dispc_channel() to match its new purpose. The dssdev->id check is removed as the dssdev is guaranteed to be an output and have a non-zero id, as proved by the lack of crash despite the caller never checking the returned pointer before dereferencing it. As the function is not specific to outputs anymore, move it from output.c to base.c. Signed-off-by:
-
Laurent Pinchart authored
The DSS manager ops and private data pointer are specific to a DSS instance. Store them in the dss_device structure instead of global variable. Signed-off-by:
-
Laurent Pinchart authored
Storing the dss_device pointer in the omap_dss_device structure will allow accessing the dss_device from the dss_mgr API functions. Signed-off-by:
-
Laurent Pinchart authored
The functions operate on any omap_dss_device, move them from display.c to base.c. While at it rename them to match the naming of the other functions operating on struct omap_dss_device. Signed-off-by:
-
Laurent Pinchart authored
The panel devices list isn't used anymore, all panel devices are accessed through the global devices list. Remove it. Signed-off-by:
-
Laurent Pinchart authored
Split the function into omapdss_display_init() to perform display-specific initialization of the omap_dss_device, and omapdss_register_display() to register the device. The latter will then be replaced by more generic registration. Signed-off-by:
-
Laurent Pinchart authored
Despite its name, the omap_dss_get_next_device() function operates on display devices only. Make it more generic by allowing operation on all devices, with a parameter to specify the device type. While at it rename the function to omapdss_device_get_next() to match the naming of the other functions operating on struct omap_dss_device. Signed-off-by:
-
Laurent Pinchart authored
The macro iterates over displays only, rename it accordingly. Signed-off-by:
-
Laurent Pinchart authored
The output devices list isn't used anymore, all output devices are accessed through the global devices list. Remove it. Signed-off-by:
-
Laurent Pinchart authored
The DSI clocks are dumped in the DSS-level debugfs clocks file. This complicates the implementation as the DSI private data has to be looked up through the outputs list. Simplify it by creating two debugfs files, dsi1_clks and dsi2_clks, to dump the DSI clocks. Signed-off-by:
-
Laurent Pinchart authored
The DSI debugfs regs and irqs show handlers received a pointer to the DSI private data. There's no need to look it up from the list of DSS outputs. Use the pointer directly, this allows simplifying the implementation of the handlers. Signed-off-by:
-
Laurent Pinchart authored
All connectors, encoders and panels store a pointer to their input omap_dss_device in the panel driver data structure. This duplicates the src field in the omap_dss_device structure. Remove the private copy and use the src field. Signed-off-by:
-
Laurent Pinchart authored
The encoders duplicate the same omap_dss_device src and dst fields set and checks in their connect and disconnect handlers. Move the code to the connect and disconnect wrappers. Signed-off-by:
-
Laurent Pinchart authored
In preparation for the move of checks from the disconnect handlers to the omapdss_device_disconnect() function, replace direct calls to the disconnect handlers at remove time with calls to omapdss_device_disconnect(). Signed-off-by:
-
Laurent Pinchart authored
The connectors, encoders and display duplicate the same debug messages and connection checks in their omap_dss_device connect and disconnect handlers. Move the code to the connect and disconnect wrappers. To simplify the code the connect function returns -EBUSY unconditionally if the device is already connected. This doesn't cause any change in practice: the connect handler of displays is never called on a connected device as it is only invoked during omapdrm initialization. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device objects model display components and are connected at runtime to create display pipelines. The connect and disconnect operations implemented by each component contain lots of duplicate code. As a first step towards fixing this, create new functions to wrap the direct calls to those operations and use them. Signed-off-by:
-
Laurent Pinchart authored
The various types of omapdss_*_ops structures define multiple operations that are not specific to a bus type. To simplify the code and remove dependencies on specific bus types move those operations to a common structure. Operations that are specific to a bus type are kept in the specialized ops structures. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_find_output_by_port() function looks up an omap_dss_device by port from the list of devices registered as outputs. In preparation for looking up sinks in addition to sources, allow the function to look up any registered device. Rename it to omap_dss_find_device_by_port() to match its new purpose. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_find_output_by_port_node() function defined in output.c looks up an output from its port node. To do so it needs to call helper functions from dss-of.c to lookup the port parent and the port number. As omap_dss_find_output_by_port_node() is only called by omapdss_of_find_source_for_first_ep() from dss-of.c this goes back and forth between the to source files and isn't very clear. Simplify the code by passing both the parent and the port number to omap_dss_find_output_by_port_node() instead of the port node, and rename the function to omap_dss_find_output_by_port(). Signed-off-by:
-
Laurent Pinchart authored
The omapdss_component_is_loaded() function test whether a component is loaded by checking whether it is present in the displays list or the outputs list. Simplify the implementation by checking for the component in the global omap_dss_device list. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device instances are stored in two separate lists, depending on whether they are panels or outputs. Create a third list that stores all omap_dss_device instances to allow generic code to operate on all instances. Signed-off-by:
-
Laurent Pinchart authored
For coherency with the panel_list field, rename list to output_list. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device panel.dsi_pix_fmt and panel.dsi_mode fields are unused. Remove them. Signed-off-by:
-
Laurent Pinchart authored
The omap_dss_device structure stores a videomode. All the connector and panel drivers that use omap_dss_device also store the videomode in their own panel_drv_data structures. There's no need to duplicate, remove the videomode field from omap_dss_device. Signed-off-by:
-
Laurent Pinchart authored
The structure contains function pointers that don't need to be modified. Make all its instances const to improve security. Signed-off-by:
-
