[ Upstream commit 2fe664f1 ]

With TCP MTU probing enabled and offload TX checksumming disabled,
tcp_mtu_probe() calculated the wrong checksum when a fragment being copied
into the probe's SKB had an odd length. This was caused by the direct use
of skb_copy_and_csum_bits() to calculate the checksum, as it pads the
fragment being copied, if needed. When this fragment was not the last, a
subsequent call used the previous checksum without considering this
padding.

The effect was a stale connection in one way, as even retransmissions
wouldn't solve the problem, because the checksum was never recalculated for
the full SKB length.
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 20c64d5c ]

A malicious TCP receiver, sending SACK, can force the sender to split
skbs in write queue and increase its memory usage.

Then, when socket is closed and its write queue purged, we might
overflow sk_forward_alloc (It becomes negative)

sk_mem_reclaim() does nothing in this case, and more than 2GB
are leaked from TCP perspective (tcp_memory_allocated is not changed)

Then warnings trigger from inet_sock_destruct() and
sk_stream_kill_queues() seeing a not zero sk_forward_alloc

All TCP stack can be stuck because TCP is under memory pressure.

A simple fix is to preemptively reclaim from sk_mem_uncharge().

This makes sure a socket wont have more than 2 MB forward allocated,
after burst and idle period.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ffb4d6c8 ]

If a TCP socket gets a large write queue, an overflow can happen
in a test in __tcp_retransmit_skb() preventing all retransmits.

The flow then stalls and resets after timeouts.

Tested:

sysctl -w net.core.wmem_max=1000000000
netperf -H dest -- -s 1000000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cf0ea4da upstream.

Like many similar devices it needs a quirk to work.
Issuing the request gets the device into an irrecoverable state.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 40b6e61a upstream.

Commit e96a8a3b ("UBI: Fastmap: Do not add vol if it already
exists") introduced a bug by changing the possible error codes returned
by add_vol():
- this function no longer returns NULL in case of allocation failure
  but return ERR_PTR(-ENOMEM)
- when a duplicate entry in the volume RB tree is found it returns
  ERR_PTR(-EEXIST) instead of ERR_PTR(-EINVAL)

Fix the tests done on add_vol() return val to match this new behavior.

Fixes: e96a8a3b ("UBI: Fastmap: Do not add vol if it already exists")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d9092f52 upstream.

Commit 41061cdb ("KVM: emulate: do not initialize memopp") removes a
check for non-NULL under incorrect assumptions. An undefined instruction
with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt
to dereference a null pointer here.

Fixes: 41061cdb
Message-Id: <1477592752-126650-2-git-send-email-osh@google.com>
Signed-off-by: Owen Hofmann <osh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 42acfc66 upstream.

In csi_J(3), the third parameter of scr_memsetw (vc_screenbuf_size) is
divided by 2 inappropriatelly. But scr_memsetw expects size, not
count, because it divides the size by 2 on its own before doing actual
memset-by-words.

So remove the bogus division.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Petr Písař <ppisar@redhat.com>
Fixes: f8df13e0 (tty: Clean console safely)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 51fbc7c0 upstream.

In commit 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support"), the
size of the memory allocated with 'dma_alloc_coherent()' has been modified
but the corresponding calls to 'dma_free_coherent()' have not been updated
accordingly.

This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@

*   ret = dma_alloc_coherent(x0, y0, z0, t0);
    ...
*   dma_free_coherent(x1, y1, ret, t1);

@script:python@
y0 << r.y0;
y1 << r.y1;

@@
if y1.find(y0) == -1:
 print "WARNING: sizes look different:  '%s'   vs   '%s'" % (y0, y1)
////////////////////

Fixes: 2abd9d5f ("usb: dwc3: ep0: Add chained TRB support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0733424c upstream.

Exported pwm channels aren't removed before the pwmchip and are
leaked. This results in invalid sysfs files. This fix removes
all exported pwm channels before chip removal.
Signed-off-by: David Hsu <davidhsu@google.com>
Fixes: 76abbdde ("pwm: Add sysfs interface")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ecbfa8ea upstream.

scan_pool() does not mark the PEB for scrubing when bitflips are
detected in the EC header of a free PEB (VID header region left to
0xff).
Make sure we scrub the PEB in this case.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: dbb7d2a8 ("UBI: Add fastmap core")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 124a3d88 upstream.

Newer versions of gcc warn about the use of __builtin_return_address()
with a non-zero argument when "-Wall" is specified:

  kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’:
  kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address]
     stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
  [ .. repeats a few times for other similar cases .. ]

It is true that a non-zero argument is somewhat dangerous, and we do not
actually have very many uses of that in the kernel - but the ftrace code
does use it, and as Stephen Rostedt says:

 "We are well aware of the danger of using __builtin_return_address() of
  > 0.  In fact that's part of the reason for having the "thunk" code in
  x86 (See arch/x86/entry/thunk_{64,32}.S).  [..] it adds extra frames
  when tracking irqs off sections, to prevent __builtin_return_address()
  from accessing bad areas.  In fact the thunk_32.S states: 'Trampoline to
  trace irqs off.  (otherwise CALLER_ADDR1 might crash)'."

For now, __builtin_return_address() with a non-zero argument is the best
we can do, and the warning is not helpful and can end up making people
miss other warnings for real problems.

So disable the frame-address warning on compilers that need it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e3ebd894 upstream.

The smc91x driver defines a macro that compares its argument to
itself, apparently to get a true result while using its argument
to avoid a warning about unused local variables.

Unfortunately, this triggers a warning with gcc-6, as the comparison
is obviously useless:

drivers/net/ethernet/smsc/smc91x.c: In function 'smc_hardware_send_pkt':
drivers/net/ethernet/smsc/smc91x.c:563:14: error: self-comparison always evaluates to true [-Werror=tautological-compare]
  if (!smc_special_trylock(&lp->lock, flags)) {

This replaces the macro with another one that behaves similarly,
with a cast to (void) to ensure the argument is used, and using
a literal 'true' as its value.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cfe02a8a upstream.

When all subsystems are disabled, gcc notices that cgroup_subsys_enabled_key
is a zero-length array and that any access to it must be out of bounds:

In file included from ../include/linux/cgroup.h:19:0,
                 from ../kernel/cgroup.c:31:
../kernel/cgroup.c: In function 'cgroup_add_cftypes':
../kernel/cgroup.c:261:53: error: array subscript is above array bounds [-Werror=array-bounds]
  return static_key_enabled(cgroup_subsys_enabled_key[ssid]);
                            ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
../include/linux/jump_label.h:271:40: note: in definition of macro 'static_key_enabled'
  static_key_count((struct static_key *)x) > 0;    \
                                        ^

We should never call the function in this particular case, so this is
not a bug. In order to silence the warning, this adds an explicit check
for the CGROUP_SUBSYS_COUNT==0 case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 55c4b906 upstream.

gcc-6 warns about a pointless loop in exynos_drm_subdrv_open:

drivers/gpu/drm/exynos/exynos_drm_core.c: In function 'exynos_drm_subdrv_open':
drivers/gpu/drm/exynos/exynos_drm_core.c:104:199: error: self-comparison always evaluates to false [-Werror=tautological-compare]
  list_for_each_entry_reverse(subdrv, &subdrv->list, list) {

Here, the list_for_each_entry_reverse immediately terminates because
the subdrv pointer is compared to itself as the loop end condition.

If we were to take the current subdrv pointer as the start of the
list (as we would do if list_for_each_entry_reverse() was not a macro),
we would iterate backwards over the &exynos_drm_subdrv_list anchor,
which would be even worse.

Instead, we need to use list_for_each_entry_continue_reverse()
to go back over each subdrv that was successfully opened until
the first entry.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit badbda53 upstream.

pageblock_order can be (at least) an unsigned int or an unsigned long
depending on the kernel config and architecture, so use max_t(unsigned
long, ...) when comparing it.

fixes these warnings:

In file included from include/asm-generic/bug.h:13:0,
                 from arch/powerpc/include/asm/bug.h:127,
                 from include/linux/bug.h:4,
                 from include/linux/mmdebug.h:4,
                 from include/linux/mm.h:8,
                 from include/linux/memblock.h:18,
                 from mm/cma.c:28:
mm/cma.c: In function 'cma_init_reserved_mem':
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);                   ^
mm/cma.c:186:27: note: in expansion of macro 'max'
  alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
                           ^
mm/cma.c: In function 'cma_declare_contiguous':
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);                   ^
include/linux/kernel.h:747:9: note: in definition of macro 'max'
  typeof(y) _max2 = (y);            ^
mm/cma.c:270:29: note: in expansion of macro 'max'
   (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order));
                             ^
include/linux/kernel.h:748:17: warning: comparison of distinct pointer types lacks a cast
  (void) (&_max1 == &_max2);                   ^
include/linux/kernel.h:747:21: note: in definition of macro 'max'
  typeof(y) _max2 = (y);                        ^
mm/cma.c:270:29: note: in expansion of macro 'max'
   (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order));
                             ^

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160526150748.5be38a4f@canb.auug.org.auSigned-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dd665be0 upstream.

gcc-6.0 warns about comparisons between two identical expressions,
which is what we get in the floppy driver when writing to the FD_DOR
register:

drivers/block/floppy.c: In function 'set_dor':
drivers/block/floppy.c:810:44: error: self-comparison always evaluates to true [-Werror=tautological-compare]
   fd_outb(newdor, FD_DOR);

It would be nice to use a static inline function instead of the
macro, to avoid the warning, but we cannot do that because the
FD_DOR definition is incomplete at this point.

Adding a cast to (u32) is a harmless way to shut up the warning,
just not very nice.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e407ee3 upstream.

gcc-6 correctly warns about a out of bounds access

arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
        offsetof(struct thread_fp_state, fpr[32][0]));
                        ^

check the end of array instead of beginning of next element to fix this
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1cf38741 upstream.

xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 67befc65 upstream.

Ingo reported following build failure:

  $ make clean install
  ...
    CC       plugin_kmem.o
  fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory
  /home/mingo/tip/tools/build/Makefile.build:77: recipe for target
  'plugin_hrtimer.o' failed
  make[3]: *** [plugin_hrtimer.o] Error 2
  Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed
  make[2]: *** [plugin_hrtimer-in.o] Error 2
  Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed
  make[1]: *** [libtraceevent_plugins] Error 2
  make[1]: *** Waiting for unfinished jobs....

Currently we have the install-traceevent-plugins target being dependent
on $(LIBTRACEEVENT), which will actualy not build any plugin. So the
install-traceevent-plugins target itself will try to build plugins,
but..

Plugins built is also triggered by perf build itself via
libtraceevent_plugins target.

This might cause a race having one make thread removing temp files from
another and result in above error. Fixing this by having proper plugins
build dependency before installing plugins.
Reported-and-Tested-by: : Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1448546044-28973-3-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4da5caa6 upstream.

Only certain types of pdts have the DDC bus registered, so check for
that before we attempt the EDID read. Othwewise we risk playing around
with an i2c adapter that doesn't actually exist.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 537b4b46 upstream.

The read is taking a considerable amount of time (about 50us on this
machine). The register does not ever hold anything other than the ring
ID that is updated in this exact function, so there is no need for
the read modify write cycle.

This chops off a big chunk of the time spent in hardirq disabled
context, as this function is called multiple times in the interrupt
handler. With this change applied radeon won't show up in the list
of the worst IRQ latency offenders anymore, where it was a regular
before.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7dc86ef5 upstream.

Consolidate existing quirks. Fixes stability issues
on some kickers.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fb9a5b0c upstream.

Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9dc79965 upstream.

This reverts commit 1a738347.

It caused at least some Kaveri laptops to incorrectly report DisplayPort
connectors as connected.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 45c7a490 upstream.

platform_get_resource can be returned the NULL pointer.
Then regs->start should be referred to NULL Pointer.
devm_ioremap_resource() checks whether res is NULL or not.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2bf7dc84 upstream.

The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller
firmware. Depending on how drive caches are handled internally by
controller firmware this could potentially lead to data integrity
problems.

Ensure that cache flushes are passed to the controller.

[mkp: applied by hand and removed unused vars]
Signed-off-by: Ching Huang <ching2048@areca.com.tw>
Reported-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d2b496f upstream.

map_storep was not being vfree()'d in the module_exit call.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e793f6f upstream.

Commit 02b01e01 ("megaraid_sas: return sync cache call with
success") modified the driver to successfully complete SYNCHRONIZE_CACHE
commands without passing them to the controller. Disk drive caches are
only explicitly managed by controller firmware when operating in RAID
mode. So this commit effectively disabled writeback cache flushing for
any drives used in JBOD mode, leading to data integrity failures.

[mkp: clarified patch description]

Fixes: 02b01e01Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea720935 upstream.

In mac80211, multicast A-MSDUs are accepted in many cases that
they shouldn't be accepted in:
 * drop A-MSDUs with a multicast A1 (RA), as required by the
   spec in 9.11 (802.11-2012 version)
 * drop A-MSDUs with a 4-addr header, since the fourth address
   can't actually be useful for them; unless 4-address frame
   format is actually requested, even though the fourth address
   is still not useful in this case, but ignored

Accepting the first case, in particular, is very problematic
since it allows anyone else with possession of a GTK to send
unicast frames encapsulated in a multicast A-MSDU, even when
the AP has client isolation enabled.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9300a4b upstream.

RFC 2734 defines the datagram_size field in fragment encapsulation
headers thus:

    datagram_size:  The encoded size of the entire IP datagram.  The
    value of datagram_size [...] SHALL be one less than the value of
    Total Length in the datagram's IP header (see STD 5, RFC 791).

Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got
this field with a -/+1 offset:

    ether1394_tx() /* transmit */
        ether1394_encapsulate_prep()
            hdr->ff.dg_size = dg_size - 1;

    ether1394_data_handler() /* receive */
        if (hdr->common.lf == ETH1394_HDR_LF_FF)
            dg_size = hdr->ff.dg_size + 1;
        else
            dg_size = hdr->sf.dg_size + 1;

Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500
byte sized datagrams in fragments with datagram_size=1499 if link
fragmentation is required.

Only firewire-net sets and gets datagram_size without this offset.  The
result is lacking interoperability of firewire-net with OS X, Windows
XP, and presumably Linux' eth1394.  (I did not test with the latter.)
For example, FTP data transfers to a Linux firewire-net box with max_rec
smaller than the 1500 bytes MTU
  - from OS X fail entirely,
  - from Win XP start out with a bunch of fragmented datagrams which
    time out, then continue with unfragmented datagrams because Win XP
    temporarily reduces the MTU to 576 bytes.

So let's fix firewire-net's datagram_size accessors.

Note that firewire-net thereby loses interoperability with unpatched
firewire-net, but only if link fragmentation is employed.  (This happens
with large broadcast datagrams, and with large datagrams on several
FireWire CardBus cards with smaller max_rec than equivalent PCI cards,
and it can be worked around by setting a small enough MTU.)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 667121ac upstream.

The IP-over-1394 driver firewire-net lacked input validation when
handling incoming fragmented datagrams.  A maliciously formed fragment
with a respectively large datagram_offset would cause a memcpy past the
datagram buffer.

So, drop any packets carrying a fragment with offset + length larger
than datagram_size.

In addition, ensure that
  - GASP header, unfragmented encapsulation header, or fragment
    encapsulation header actually exists before we access it,
  - the encapsulated datagram or fragment is of nonzero size.
Reported-by: Eyal Itkin <eyal.itkin@gmail.com>
Reviewed-by: Eyal Itkin <eyal.itkin@gmail.com>
Fixes: CVE 2016-8633
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit da25311c upstream.

The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop.
Therefore it also needs a keyboard reset to detect the Elantech touchpad.
Otherwise the touchpad appears to be dead.

With this patch the touchpad is detected:

$ dmesg | grep -E "(i8042|Elantech|elantech)"

[    2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.680372] i8042: Attempting to reset device connected to KBD port
[    2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e)
[    3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[    3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74
[    3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
Signed-off-by: Patrick Scheuring <patrick.scheuring.dev@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcb2ff56 upstream.

If a default leg has failed, any read will cause a new operational
default leg to be selected and the read is resubmitted.  But until now
the read will return failure even though it was successful due to
resubmission.  The reason for this is bio->bi_error was not being
cleared before resubmitting the bio.

Fix by clearing bio->bi_error before resubmission.

Fixes: 4246a0b6 ("block: add a bi_error field to struct bio")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 34563769 upstream.

Commit c6017e79 ("virtio: console: add locks around buffer removal
in port unplug path") added locking around the freeing of buffers in the
vq. However, when free_buf() is called with can_sleep = true and rproc
is enabled, it calls dma_free_coherent() directly, requiring interrupts
to be enabled. Currently a WARNING is triggered due to the spin locking
around free_buf, with a call stack like this:

WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433
free_buf+0x1a8/0x288
Call Trace:
[<8040c538>] show_stack+0x74/0xc0
[<80757240>] dump_stack+0xd0/0x110
[<80430d98>] __warn+0xfc/0x130
[<80430ee0>] warn_slowpath_null+0x2c/0x3c
[<807e7c6c>] free_buf+0x1a8/0x288
[<807ea590>] remove_port_data+0x50/0xac
[<807ea6a0>] unplug_port+0xb4/0x1bc
[<807ea858>] virtcons_remove+0xb0/0xfc
[<807b6734>] virtio_dev_remove+0x58/0xc0
[<807f918c>] __device_release_driver+0xac/0x134
[<807f924c>] device_release_driver+0x38/0x50
[<807f7edc>] bus_remove_device+0xfc/0x130
[<807f4b74>] device_del+0x17c/0x21c
[<807f4c38>] device_unregister+0x24/0x38
[<807b6b50>] unregister_virtio_device+0x28/0x44

Fix this by restructuring the loops to allow the locks to only be taken
where it is necessary to protect the vqs, and release it while the
buffer is being freed.

Fixes: c6017e79 ("virtio: console: add locks around buffer removal in port unplug path")
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ea1e4a6 upstream.

According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is
negotiated the driver MUST set flags to 0. Not dirtying the available
ring in virtqueue_disable_cb also has a minor positive performance
impact, improving L1 dcache load missed by ~0.5% in vring_bench.

Writes to the used event field (vring_used_event) are still unconditional.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6ed51832 upstream.

We have one critical section in the syscall entry path in which we switch from
the userspace stack to kernel stack. In the event of an external interrupt, the
interrupt code distinguishes between those two states by analyzing the value of
sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that
the value of sr7 is in sync with the currently enabled stack.

This patch now disables interrupts while executing the critical section.  This
prevents the interrupt handler to possibly see an inconsistent state which in
the worst case can lead to crashes.

Interestingly, in the syscall exit path interrupts were already disabled in the
critical section which switches back to the userspace stack.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 641089c1 upstream.

Make sure the copied up file hits the disk before renaming to the final
destination.  If this is not done then the copy-up may corrupt the data in
the file in case of a crash.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ede5f3e7 upstream.

The ERET instruction to return from exception is used for returning from
exception level (Status.EXL) and error level (Status.ERL). If both bits
are set however we should be returning from ERL first, as ERL can
interrupt EXL, for example when an NMI is taken. KVM however checks EXL
first.

Fix the order of the checks to match the pseudocode in the instruction
set manual.

Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bd768e14 upstream.

vcpu->arch.wbinvd_dirty_mask may still be used after freeing it,
corrupting memory. For example, the following call trace may set a bit
in an already freed cpu mask:
    kvm_arch_vcpu_load
    vcpu_load
    vmx_free_vcpu_nested
    vmx_free_vcpu
    kvm_arch_vcpu_free

Fix this by deferring freeing of wbinvd_dirty_mask.
Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>