- 08 Mar, 2021 3 commits
-
-
Christian König authored
This is necessary when changing priorities of an entity. v2: test the sched_list instead of num_sched. v3: set the sched_list to NULL when there is only one entry Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305125155.2312-1-christian.koenig@amd.com
-
Jagan Teki authored
STM ltdc driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Tested-by:
Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by:
Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210302175700.28640-1-jagan@amarulasolutions.com
-
Jianhui Zhao authored
Signed-off-by:
Jianhui Zhao <zhaojh329@gmail.com> Signed-off-by:
Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20210308064250.3681707-1-zhaojh329@gmail.com
-
- 07 Mar, 2021 1 commit
-
-
Paul Cercueil authored
Even though the JZ4740 did not have the OSD mode, it had (according to the documentation) two DMA channels, but there is absolutely no information about how to select the second DMA channel. Make the ingenic-drm driver work in non-OSD mode by using the foreground0 plane (which is bound to the DMA0 channel) as the primary plane, instead of the foreground1 plane, which is the primary plane when in OSD mode. Fixes: 3c9bea4e ("drm/ingenic: Add support for OSD mode") Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by:
H. Nikolaus Schaller <hns@goldelico.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net
-
- 04 Mar, 2021 1 commit
-
-
Linus Walleij authored
A recent patch renaming MIPI_DSI_MODE_EOT_PACKET to MIPI_DSI_MODE_NO_EOT_PACKET brought to light the misunderstanding in the current MCDE driver and all its associated panel drivers that MIPI_DSI_MODE_EOT_PACKET would mean "use EOT packet" when in fact it means the reverse. Fix it up by implementing the flag right in the MCDE DSI driver and remove the flag from panels that actually want the EOT packet. Suggested-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
- 02 Mar, 2021 2 commits
-
-
Lionel Landwerlin authored
Just a silly mistake Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Suggested-by:
Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
-
Daniel Vetter authored
Somehow this got forgotten when I applied the patch in commit e2c406ea Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jan 12 09:43:54 2021 +0100 drm/arc: Inline arcpgu_crtc.c Fixes: e2c406ea ("drm/arc: Inline arcpgu_crtc.c") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
- 01 Mar, 2021 1 commit
-
-
Jan Beulich authored
By having selected DRM_XEN, I was assuming I would build the frontend driver. As it turns out this is a dummy option, and I have really not been building this (because I had DRM disabled). Make it a promptless one, moving the "depends on" to the other, real option, and "select"ing the dummy one. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by:
-
- 26 Feb, 2021 3 commits
-
-
Zack Rusin authored
We should advertise the reworked fifo/cmd handling and huge pages support. Also while bumping the version number lets cleanup the logging, there's no point in logging whether we're atomic (we always are) or what repo we use (it's always in kernel now). Signed-off-by:
Zack Rusin <zackr@vmware.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224163034.918430-1-zackr@vmware.com
-
Daniel Vetter authored
drm_noop really doesn't do much, and who cares about the permission checks. So let's delete some code. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Daniel Vetter authored
Some of them have gaps, or fields we don't clear. Native ioctl code does full copies plus zero-extends on size mismatch, so nothing can leak. But compat is more hand-rolled so need to be careful. None of these matter for performance, so just memset. Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those are security holes anyway. Acked-by:
-
- 25 Feb, 2021 25 commits
-
-
Rikard Falkeborn authored
The only usage of nouveau_ttm_vm_ops is to assign its address to the vm_ops field in the vm_area_struct struct. Make it const to allow the compiler to put it in read-only memory Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by:
-
Rikard Falkeborn authored
The only usage of radeon_ttm_vm_ops is to assign its address to the vm_ops field in the vm_area_struct struct. Make it const to allow the compiler to put it in read-only memory Signed-off-by:
-
Rikard Falkeborn authored
The only usage of amdgpu_ttm_vm_ops is to assign its address to the vm_ops field in the vm_area_struct struct. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
-
John Stultz authored
By default dma_buf_export() sets the exporter name to be KBUILD_MODNAME. Unfortunately this may not be identical to the string used as the heap name (ie: "system" vs "system_heap"). This can cause some minor confusion with tooling, and there is the future potential where multiple heap types may be exported by the same module (but would all have the same name). So to avoid all this, set the exporter exp_name to the heap name. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210209194818.2459062-2-john.stultz@linaro.org
-
John Stultz authored
It can be useful to access the name for the heap, so provide an accessor to do so. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
xinhui pan authored
BO would be added into swap list if it is validated into system domain. If BO is validated again into non-system domain, say, VRAM domain. It actually should not be in the swap list. Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Acked-by:
Guchun Chen <guchun.chen@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Daniel Vetter authored
Because it is. v2: Delete now unused crtc funcs (0day) Acked-by:
-
Daniel Vetter authored
That way we can get rid of this final piece of init code, and use the simple pipe helpers as intended. v2: Fix indent (Sam) Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Daniel Vetter authored
At less than 500 lines total feels like the right thing to do. Also noticed that the simple wrapper around drm_connector_cleanup can be dropped. Acked-by:
-
Daniel Vetter authored
Really not worth the function, much less the separate file now that almost all the code is gone. Acked-by:
-
Daniel Vetter authored
Really not big anymore. Note that we no longer clamp all errors to ENODEV, highlighted by Sam. v2: Fixup update function, bug reported by Eugeniy v3: Delete now unused crtc funcs (0day) v4: Move encoder removal to right patch (Sam). Acked-by:
-
Daniel Vetter authored
It's redundant, drm core guarantees that state->fb is set iff state->crtc is set. v2: I had a misconception about simple helpers here and thought they filter this out. They don't. Issue reported by Eugeniy. Acked-by:
-
Daniel Vetter authored
Really straighforward, only slight issue is that the sim connector is created after the pipe is set up, so can't use the helpers perfectly yet. Subsequent patches will fix that. Aside from lots of deleting code no functional changes in here. v2: Delete now unused crtc funcs (0day) v3: Move endcoder setup removal to right patch (Sam) Acked-by:
-
Daniel Vetter authored
Simple pipe helpers only have an enable and disable hook, no more mode_set_nofb. Call it from our enable hook to align with that conversions. Atomic helpers always call mode_set_nofb and enable together, so there's no functional change here. Acked-by:
-
Daniel Vetter authored
With autocleanup through drm_device management we can delete all the code. Possible now that there's no confusion against devm_kzalloc'ed structures anymore. I inlined arcpgu_setup_mode_config because it's tiny and the newly needed return value handling would have been more ... Acked-by:
-
Daniel Vetter authored
drm_connector_register does nothing before drm_dev_register(), it is meant for hotpluggable connectors only. Same for the unregister side. Acked-by:
-
Daniel Vetter authored
Removes the last devm_kzalloc, which means we're now prepared to use drmm_mode_config_cleanup! Acked-by:
-
Daniel Vetter authored
This is a prep step to convert arc over to the simple kms helpers, for now we just use this as an embedding container to drop all the various allocations. Big change is the removal of the various devm_kzalloc, which have the wrong lifetimes anyway. Acked-by:
-
Daniel Vetter authored
Leftover from the conversion to the generic fbdev emulation. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by:
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Acked-by:
-
Daniel Vetter authored
- Need to embedded the drm_device, but for now we keep the usual pointer chasing. - No more devm_kzalloc, which fixes a lifetime issues on driver remove. - No more drm_dev_put, that's done by devm_ now. Acked-by:
-
Noralf Trønnes authored
dma-buf importing was reworked in commit 7d2cd72a ("drm/shmem-helpers: Simplify dma-buf importing"). Before that commit drm_gem_shmem_prime_import_sg_table() did set ->pages_use_count=1 and drm_gem_shmem_vunmap_locked() could call drm_gem_shmem_put_pages() unconditionally. Now without the use count set, put pages is called also on dma-bufs. Fix this by only putting pages if it's not imported. Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Fixes: 7d2cd72a ("drm/shmem-helpers: Simplify dma-buf importing") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Maxime Ripard authored
Only planes' prepare_fb and cleanup_fb, and encoders' atomic_check and atomic_mode_set hooks remain with an object state and not the global drm_atomic_state. prepare_fb and cleanup_fb operate by design on a given state and depending on the calling site can operate on either the old or new state, so it doesn't really make much sense to convert them. The encoders' atomic_check and atomic_mode_set operate on the CRTC and connector state connected to them since encoders don't have a state of their own. Without those state pointers, we would need to get the CRTC through the drm_connector_state crtc pointer. However, in order to get the drm_connector_state pointer, we would need to get the connector itself and while usually we have a single connector connected to the encoder, we can't really get it from the encoder at the moment since it could be behind any number of bridges. While this could be addressed by (for example) listing all the connectors and finding the one that has the encoder as its source, it feels like an unnecessary rework for something that is slowly getting replaced by bridges. Since all the users that matter have been converted, let's remove the TODO item. Acked-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
-
Maxime Ripard authored
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_update or atomic_disable hooks, which would be the new plane state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ adds_new_state @ identifier plane_atomic_func.func; identifier plane, state; identifier new_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *new_state = plane->state; + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Maxime Ripard authored
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 24 Feb, 2021 4 commits
-
-
Maxime Ripard authored
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: -
Maxime Ripard authored
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: -
Maxime Ripard authored
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_check hook, which would be the old plane state in the global atomic state since _swap_state hasn't happened when atomic_check is run. Use the drm_atomic_get_old_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ replaces_old_state @ identifier plane_atomic_func.func; identifier plane, state, plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = plane->state; + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @@ identifier plane_atomic_func.func; identifier plane, state, plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <... - plane->state + plane_state ...> } @ adds_old_state @ identifier plane_atomic_func.func; identifier plane, state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); <... - plane->state + old_plane_state ...> } @ include depends on adds_old_state || replaces_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_old_state || replaces_old_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: -
Maxime Ripard authored
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by:
-
