it is reported that code hit DMA-API errors on 3.8-rc6+,
(see https://bugzilla.redhat.com/show_bug.cgi?id=908436, and
     https://bugzilla.redhat.com/show_bug.cgi?id=908550)

this patch just adds error handler for
    pci_map_single and skb_frag_dma_map.
Signed-off-by: xiong <xiong@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in htb_change_class() cl->buffer and cl->buffer are stored in ns.
So in dump, convert them back to psched ticks.

Note this was introduced by:
commit 56b765b7
    htb: improved accuracy at high rates

Please consider this for -net/-stable.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John W. Linville says:

====================
Here is another handful of late-breaking fixes intended for the 3.8
stream...  Hopefully the will still make it! :-)

There are three mac80211 fixes pulled from Johannes:

"Here are three fixes still for the 3.8 stream, the fix from Cong Ding
for the bad sizeof (Stephen Hemminger had pointed it out before but I'd
promptly forgotten), a mac80211 managed-mode channel context usage fix
where a downgrade would never stop until reaching non-HT and a bug in
the channel determination that could cause invalid channels like HT40+
on channel 11 to be used."

Also included is a mwl8k fix that avoids an oops when using mwl8k
devices that only support the 5 GHz band.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The original fix that was applied for setting gso_type required more change
than necessary because it was assumed ixgbe does RSC on IPv6 frames and this
is not correct.  RSC is only supported with IPv4/TCP frames only.  As such we
can simplify the fix and avoid the unnecessary move of eth_type_trans.

The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix
to one line that sets gso_type to TCPV4 if the frame is RSC.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tommi was fuzzing with trinity and reported the following problem :

commit 3f518bf7 (datagram: Add offset argument to __skb_recv_datagram)
missed that a raw socket receive queue can contain skbs with no payload.

We can loop in __skb_recv_datagram() with MSG_PEEK mode, because
wait_for_packet() is not prepared to skip these skbs.

[   83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {}
(detected by 0, t=26002 jiffies, g=27673, c=27672, q=75)
[   83.541011] INFO: Stall ended before state dump start
[  108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847]
...
[  108.067010] Call Trace:
[  108.067010]  [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0
[  108.067010]  [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30
[  108.067010]  [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240
[  108.067010]  [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50
[  108.067010]  [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0
[  108.067010]  [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150
[  108.067010]  [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Interface layout:

 00 CD-ROM
 01 debug COM port
 02 AP control port
 03 modem
 04 usb-ethernet

Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0408 ProdID=ea42 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

The band field for the supported channels were left unpopulated, making
them default to 0 == IEEE80211_BAND_2GHZ, even for the 5GHz channels.

This resulted in null pointer accesses if anything tries to access
wiphy->bands[channel->band] of a 5GHz channel on 5GHz only cards, since
wiphy->bands[2GHZ] is NULL for them (e.g. cfg80211_chandef_usable does).

Example kernel OOPS:

[  665.669993] Unable to handle kernel NULL pointer dereference at virtual address 00000016
[  665.678194] pgd = c6d58000
[  665.680941] [00000016] *pgd=06f8a831, *pte=00000000, *ppte=00000000
[  665.687303] Internal error: Oops: 17 [#1]
(...)
[  666.116373] Backtrace:
[  666.118866] [<bf0368dc>] (cfg80211_chandef_usable+0x0/0x1bc [cfg80211]) from [<bf025e64>] (nl80211_leave_mesh+0x244/0x264 [cfg80211])
[  666.130919]  r7:c6d12100 r6:0000143c r5:c0611c48 r4:c0611b98
[  666.136668] [<bf025d84>] (nl80211_leave_mesh+0x164/0x264 [cfg80211]) from [<bf02634c>] (nl80211_remain_on_channel+0x2a0/0x358 [cfg80211])
[  666.149074]  r7:c6d12000 r6:c6d12000 r5:c6f4f368 r4:00000003
[  666.154814] [<bf0262ec>] (nl80211_remain_on_channel+0x240/0x358 [cfg80211]) from [<bf02ddb0>] (nl80211_set_wiphy+0x264/0x560 [cfg80211])
[  666.167150] [<bf02db4c>] (nl80211_set_wiphy+0x0/0x560 [cfg80211]) from [<c01f94e0>] (genl_rcv_msg+0x1b8/0x1f8)
[  666.177205] [<c01f9328>] (genl_rcv_msg+0x0/0x1f8) from [<c01f89a0>] (netlink_rcv_skb+0x58/0xb4)
[  666.185949] [<c01f8948>] (netlink_rcv_skb+0x0/0xb4) from [<c01f931c>] (genl_rcv+0x20/0x2c)
[  666.194251]  r6:c6f70780 r5:0000002c r4:c6f70780 r3:00000001
[  666.199973] [<c01f92fc>] (genl_rcv+0x0/0x2c) from [<c01f8418>] (netlink_unicast+0x154/0x1f4)
[  666.208449]  r4:c785ea00 r3:c01f92fc
[  666.212057] [<c01f82c4>] (netlink_unicast+0x0/0x1f4) from [<c01f8790>] (netlink_sendmsg+0x230/0x2b0)
[  666.221240] [<c01f8560>] (netlink_sendmsg+0x0/0x2b0) from [<c01cccf8>] (sock_sendmsg+0x90/0xa4)
[  666.229986] [<c01ccc68>] (sock_sendmsg+0x0/0xa4) from [<c01cdcb0>] (__sys_sendmsg+0x290/0x298)
[  666.238637]  r9:00000000 r8:c0611ec8 r6:0000002c r5:c0610000 r4:c0611f64
[  666.245411] [<c01cda20>] (__sys_sendmsg+0x0/0x298) from [<c01cf52c>] (sys_sendmsg+0x44/0x6c)
[  666.253897] [<c01cf4e8>] (sys_sendmsg+0x0/0x6c) from [<c00090a0>] (ret_fast_syscall+0x0/0x2c)
[  666.262460]  r6:00000000 r5:beeff96c r4:00000005
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Spanning Tree Protocol packets should have always been marked as
control packets, this causes them to get queued in the high prirority
FIFO. As Radia Perlman mentioned in her LCA talk, STP dies if bridge
gets overloaded and can't communicate. This is a long-standing bug back
to the first versions of Linux bridge.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When trying to connect to an AP that advertises HT but not
VHT, the mac80211 code erroneously uses the configuration
from the AP as is instead of checking it against regulatory
and local capabilities. This can lead to using an invalid
or even inexistent channel (like 11/HT40+).

Additionally, the return flags from downgrading must be
ORed together, to collect them from all of the downgrades.
Also clarify the message.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter/IPVS fixes for 3.8-rc7, they are:

* Fix oops in IPVS state-sync due to releasing a random memory area due
  to unitialized pointer, from Dan Carpenter.

* Fix SCTP flow establishment due to bad checksumming mangling in IPVS,
  from Daniel Borkmann.

* Three fixes for the recently added IPv6 NPT, all from YOSHIFUJI Hideaki,
  with an amendment collapsed into those patches from Ulrich Weber. They
  fiix adjustment calculation, fix prefix mangling and ensure LSB of
  prefixes are zeroes (as required by RFC).

Specifically, it took me a while to validate the 1's complement arithmetics/
checksumming approach in the IPv6 NPT code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We should call skb_share_check() before pskb_may_pull(), or we
can crash in pskb_expand_head()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael S. Tsirkin says:

====================
At the moment, macvtap crashes are observed if macvtap is attached
to an interface with LRO enabled.
The crash in question is BUG() in macvtap_skb_to_vnet_hdr.
This happens because several drivers set gso_size but not gso_type
in incoming skbs.
This didn't use to be the case: with intel cards on 3.2 and older
kernels, with qlogic - on 3.4 and older kernels, so it's a regression if
not a recent one.
The following patches fix this for qlogic, broadcom and intel drivers.

I tested that the patch fixes the crash for ixgbe but
don't have qlogic/broadcom hardware to test.
I also only tested TCPv4.

Please review, and consider for 3.8.

Changes from v1:
	- added missing htons as suggested by Eric
	- backported the relevant bits from
	  cbf1de72 for bnx2x
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In LRO mode, bnx2x set gso_size but not gso type.
This leads to crashes in macvtap.
Commit cbf1de72
queued for 3.9 includes a more complete fix.
This is a minimal patch to avoid the crash, for 3.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic set gso_size but not gso type. This leads to crashes
in macvtap.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe set gso_size but not gso_type. This leads to
crashes in macvtap.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With this patch the stmmac fails in case of the phy device
is not found; w/o this fix the mdio can be register twice when
do down/up the iface and this is not correct.
Reported-by: Stas <stsp@list.ru>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the name of the macro used for
debugging the transmit process. I used STMMAC_TX_DEBUG
instead of STMMAC_XMIT_DEBUG.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert two power saving r8169 changes to fix some regressions
reported.
Reported-by: Jörg Otte <jrg.otte@gmail.com>
Tested-by: Jörg Otte <jrg.otte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit d64ec841.

Jörg Otte reported his 8168evl to increase boot time link detection
from 1.6 to 10 s.

Hayes suggests reverting it for the time being.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Cc: Jörg Otte <jrg.otte@gmail.com>

This reverts commit e0c07557.

Jörg Otte reported his 8168evl to fail boot time link detection.

Hayes suggests reverting it for the time being.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Cc: Jörg Otte <jrg.otte@gmail.com>

Pull ARM fixes from Russell King:
 "I was going to hold these off until v3.8 was out, and send them with a
  stable tag, but as everyone else is pushing much bigger fixes which
  Linus is accepting, let's save people from the hastle of having to
  patch v3.8 back into working or use a stable kernel.

  Looking at the diffstat, this really is high value for its size; this
  is miniscule compared to how the -rc6 to tip diffstat currently looks.

  So, four patches in this set:
   - Punit Agrawal reports that the kernel no longer boots on MPCore due
     to a new assumption made in the GIC code which isn't true of
     earlier GIC designs.  This is the biggest change in this set.
   - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by
     the DT-ification of the GIC support without fixing up non-DT
     Realview - which now sees a greater number of interrupts than it
     did before.
   - A fix for the DMA coherent code from Marek which uses the wrong
     check for atomic allocations; this can result in spinlock lockups
     or other nasty effects.
   - A fix from Will, which will affect all Android based platforms if
     not applied (which use the 2G:2G VM split) - this causes
     particularly 'make' to misbehave unless this bug is fixed."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization

Pull networking fixes from David Miller:

 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
    bunch of folks.  From Emmanuel Grumbach.

 2) Work limiting code in brcmsmac wifi driver can clear tx status
    without processing the event.  From Arend van Spriel.

 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.

 4) l2tp tunnel delete can race with close, fix from Tom Parkin.

 5) pktgen_add_device() failures are not checked at all, fix from Cong
    Wang.

 6) Fix unintentional removal of carrier off from tun_detach(),
    otherwise we confuse userspace, from Michael S.  Tsirkin.

 7) Don't leak socket reference counts and ubufs in vhost-net driver,
    from Jason Wang.

 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
    Horman.

 9) Protect against USB networking devices which spam the host with 0
    length frames, from Bjørn Mork.

10) Prevent neighbour overflows in ipv6 for locally destined routes,
    from Marcelo Ricardo.  This is the best short-term fix for this, a
    longer term fix has been implemented in net-next.

11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops.  This
    mistake is largely because the ipv6 functions don't even have some
    kind of prefix in their names to suggest they are ipv6 specific.
    From Tom Parkin.

12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
    Yuchung Cheng.

13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
    Francois Romieu and your's truly.

14) Fix infinite loops and divides by zero in TCP congestion window
    handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.

15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
    from Phil Sutter.

16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.

17) Protect XEN netback driver against hostile frontend putting garbage
    into the rings, don't leak pages in TX GOP checking, and add proper
    resource releasing in error path of xen_netbk_get_requests().  From
    Ian Campbell.

18) SCTP authentication keys should be cleared out and released with
    kzfree(), from Daniel Borkmann.

19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
    up corrupting socket memory accounting to the point where packet
    sending is halted indefinitely.  Just remove the adjustments
    entirely, they aren't really needed.  From Eric Dumazet.

20) ATM Iphase driver uses a data type with the same name as the S390
    headers, rename to fix the build.  From Heiko Carstens.

21) Fix a typo in copying the inner network header offset from one SKB
    to another, from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  tcp: fix for zero packets_in_flight was too broad
  brcmsmac: rework of mac80211 .flush() callback operation
  ssb: unregister gpios before unloading ssb
  bcma: unregister gpios before unloading bcma
  rtlwifi: Fix scheduling while atomic bug
  net: usbnet: fix tx_dropped statistics
  tcp: ipv6: Update MIB counters for drops
  ...

Daniel Borkmann says:

====================
Cryptographically used keys should be zeroed out when our session
ends resp. memory is freed, thus do not leave them somewhere in the
memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On sctp_endpoint_destroy, previously used sensitive keying material
should be zeroed out before the memory is returned, as we already do
with e.g. auth keys when released.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In sctp_setsockopt_auth_key, we create a temporary copy of the user
passed shared auth key for the endpoint or association and after
internal setup, we free it right away. Since it's sensitive data, we
should zero out the key before returning the memory back to the
allocator. Thus, use kzfree instead of kfree, just as we do in
sctp_auth_key_put().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).

Further investigation reveals that this regression was triggered by
394ef640 ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.

This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.
Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Steve Capper <steve.capper@arm.com>
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)

This happens because the DMA allocation code is not respecting atomic
allocations correctly.

GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested.  GFP_ATOMIC is not a flag but
a value.  The GFP bitmask flags are all prefixed with __GFP_.

The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation.  We need to do the same.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs.  Fix this by increasing
the number of available IRQs.

WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1e ]---
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting 384a2902 - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.

Some early GIC implementations return zero for the first distributor
CPU routing register.  This means we can't rely on that telling us
which CPU interface we're connected to.  We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.

So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.
Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull drm regression fix from Dave Airlie:
 "This one fixes a sleep while locked regression that was introduced
  earlier in 3.8."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try

In commit 6509141f ("usbnet: add new
flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was
using an already defined value, which broke drivers using flag
MULTI_PACKET.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Savchenko reported a DNS failure and we diagnosed that
some UDP sockets were unable to send more packets because their
sk_wmem_alloc was corrupted after a while (tx_queue column in
following trace)

$ cat /proc/net/udp
  sl  local_address rem_address   st tx_queue rx_queue tr tm->when retrnsmt   uid  timeout inode ref pointer drops
...
  459: 00000000:0270 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4507 2 ffff88003d612380 0
  466: 00000000:0277 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4802 2 ffff88003d613180 0
  470: 076A070A:007B 00000000:0000 07 FFFF4600:00000000 00:00000000 00000000   123        0 5552 2 ffff880039974380 0
  470: 010213AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4986 2 ffff88003dbd3180 0
  470: 010013AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4985 2 ffff88003dbd2e00 0
  470: 00FCA8C0:007B 00000000:0000 07 FFFFFB00:00000000 00:00000000 00000000     0        0 4984 2 ffff88003dbd2a80 0
...

Playing with skb->truesize is tricky, especially when
skb is attached to a socket, as we can fool memory charging.

Just remove this code, its not worth trying to be ultra
precise in xmit path.
Reported-by: Andrew Savchenko <bircoph@gmail.com>
Tested-by: Andrew Savchenko <bircoph@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For sensitive data like keying material, it is common practice to zero
out keys before returning the memory back to the allocator. Thus, use
kzfree instead of kfree.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch into openvswitch

Jesse Gross says:

====================
One bug fix for net/3.8 for a long standing problem that was reported a few
times recently.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ian Campbell says:

====================
The Xen netback implementation contains a couple of flaws which can
allow a guest to cause a DoS in the backend domain, potentially
affecting other domains in the system.

CVE-2013-0216 is a failure to sanity check the ring producer/consumer
pointers which can allow a guest to cause netback to loop for an
extended period preventing other work from occurring.

CVE-2013-0217 is a memory leak on an error path which is guest
triggerable.

The following series contains the fixes for these issues, as previously
included in Xen Security Advisory 39:
http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html

Changes in v2:
 - Typo and block comment format fixes
 - Added stable Cc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>