Add __vm_enable_cap() and use it for negative tests that expect
KVM_ENABLE_CAP to fail.  Opportunistically clean up the MAX_VCPU_ID test
error messages.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a backpointer to 'struct vcpu' so that tests can get at the owning
VM when passing around a vCPU object.  Long term, this will be little
more than a nice-to-have feature, but in the short term it is a critical
step toward purging the VM+vcpu_id ioctl mess without introducing even
more churn.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move the asserts for the many REDIST_REGS accesses into common helpers
instead of copy+pasting the same, unhelpful asserts over and over.  Not
providing the actual (or expected) value makes it unnecessarily painful
to debug failures, especially since test_assert() prints the errno
unconditionally, e.g. on success, it may print a stale, misleading errno.

Use kvm_device_attr_get() to handle the "success" check so that the
"success" and "expected == actual" asserts are separated, which will make
it far less likely that a user incorrectly assumes the ioctl() failed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Split the get/set device_attr helpers instead of using a boolean param to
select between get and set.  Duplicating upper level wrappers is a very,
very small price to pay for improved readability, and having constant (at
compile time) inputs will allow the selftests framework to sanity check
ioctl() invocations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop 'int' returns from *_device_has_attr() helpers that assert the
return is '0', there's no point in returning '0' and "requiring" the
caller to perform a redundant assertion.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rename kvm_device_check_attr() and its variants to kvm_has_device_attr()
to be consistent with the ioctl names and with other helpers in the KVM
selftests framework.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Multiplex the return value and fd (on success) in __kvm_create_device()
to mimic common library helpers that return file descriptors, e.g. open().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move KVM_CREATE_DEVICE_TEST to its own helper, identifying "real" versus
"test" device creation based on a hardcoded boolean buried in the middle
of a param list is painful for readers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Remove the two calls that pass @test=true to kvm_create_device() and drop
the @test param entirely.  The two removed calls don't check the return
value of kvm_create_device(), so other than verifying KVM doesn't explode,
which is extremely unlikely given that the non-test variant was _just_
called, they are pointless and provide no validation coverage.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use the KVM_IOCTL_ERROR() macro to generate error messages for a handful
of one-off arm64 ioctls.  The calls in question are made without an
associated struct kvm_vm/kvm_vcpu as they are used to configure those
structs, i.e. can't be easily converted to e.g. vcpu_ioctl().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fold kvm_util_internal.h into kvm_util_base.h, i.e. make all KVM utility
stuff "public".  Hiding struct implementations from tests has been a
massive failure, as it has led to pointless and poorly named wrappers,
unnecessarily opaque code, etc...

Not to mention that the approach was a complete failure as evidenced by
the non-zero number of tests that were including kvm_util_internal.h.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make regs_dump() and sregs_dump() static, they're only implemented by
x86 and only used internally.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use __KVM_SYSCALL_ERROR() to report and pretty print non-KVM syscall and
ioctl errors, e.g. for mmap(), munmap(), uffd ioctls, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use the recently introduced KVM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make kvm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.

Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use the recently introduced VM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name.  Keep a few
open coded assertions that provide additional info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make vm_ioctl() a macro wrapper and print the _name_ of the ioctl on
failure instead of the number.

Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence.  Again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add vcpu_get() to wrap vcpu_find() and deduplicate a pile of code that
asserts the requested vCPU exists.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop vcpu_get_fd(), it no longer has any users, and really should not
exist as the framework has failed if tests need to manually operate on
a vCPU fd.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use vcpu_access_device_attr() in arm's arch_timer test instead of
manually retrieving the vCPU's fd.  This will allow dropping vcpu_get_fd()
in a future patch.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add __vcpu_run() so that tests that want to avoid asserts on KVM_RUN
failures don't need to open code the ioctl() call.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use the recently introduced vCPU-specific ioctl() helpers instead of
open coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Split vcpu_nested_state_set() into a wrapper that asserts, and an inner
helper that does not.  Passing a bool is all kinds of awful as it's
unintuitive for readers and requires returning an 'int' from a function
that for most users can never return anything other than "success".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop @mode from vm_create() and have it use VM_MODE_DEFAULT.  Add and use
an inner helper, __vm_create(), to service the handful of tests that want
something other than VM_MODE_DEFAULT.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make vcpu_ioctl() a macro wrapper and pretty the _name_ of the ioctl on
failure instead of the number.  Add inner macros to allow handling cases
where the name of the ioctl needs to be resolved higher up the stack, and
to allow using the formatting for non-ioctl syscalls without being
technically wrong.

Deliberately do not use __stringify(), as that will expand the ioctl all
the way down to its numerical sequence, again the intent is to print the
name of the macro.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a second underscore to inner ioctl() helpers to better align with
commonly accepted kernel coding style, and to allow using a single
underscore variant in the future for macro shenanigans.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop the @perm param from vm_create() and always open VM file descriptors
with O_RDWR.  There's no legitimate use case for other permissions, and
if a selftest wants to do oddball negative testing it can open code the
necessary bits instead of forcing a bunch of tests to provide useless
information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop declarations for allocate_kvm_dirty_log() and vm_create_device(),
which no longer have implementations.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When iterating over vCPUs, invoke access_v3_redist_reg() on the "current"
vCPU instead of vCPU0, which is presumably what was intended by iterating
over all vCPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Update 'ret' with the return value of _kvm_device_access() prior to
asserting that ret is non-zero.  In the current code base, the flaw is
benign as 'ret' is guaranteed to be -EBUSY from the previous run_vcpu(),
which also means that errno==EBUSY prior to _kvm_device_access(), thus
the "errno == EFAULT" part of the assert means that a false negative is
impossible (unless the kernel is being truly mean and spuriously setting
errno=EFAULT while returning success).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The x86-only KVM_CAP_TRIPLE_FAULT_EVENT was (appropriately) renamed to
KVM_CAP_X86_TRIPLE_FAULT_EVENT when the patches were applied, but the
docs and selftests got left behind.  Fix them.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Bug the VM and terminate emulation if an out-of-bounds read into the
emulator's data cache occurs.  Knowingly contuining on all but guarantees
that KVM will overwrite random kernel data, which is far, far worse than
killing the VM.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220526210817.3428868-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Bug the VM if KVM's emulator attempts to inject a bogus exception vector.
The guest is likely doomed even if KVM continues on, and propagating a
bad vector to the rest of KVM runs the risk of breaking other assumptions
in KVM and thus triggering a more egregious bug.

All existing users of emulate_exception() have hardcoded vector numbers
(__load_segment_descriptor() uses a few different vectors, but they're
all hardcoded), and future users are likely to follow suit, i.e. the
change to emulate_exception() is a glorified nop.

As for the ctxt->exception.vector check in x86_emulate_insn(), the few
known times the WARN has been triggered in the past is when the field was
not set when synthesizing a fault, i.e. for all intents and purposes the
check protects against consumption of uninitialized data.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220526210817.3428868-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Bug the VM, i.e. kill it, if the emulator accesses a non-existent GPR,
i.e. generates an out-of-bounds GPR index.  Continuing on all but
gaurantees some form of data corruption in the guest, e.g. even if KVM
were to redirect to a dummy register, KVM would be incorrectly read zeros
and drop writes.

Note, bugging the VM doesn't completely prevent data corruption, e.g. the
current round of emulation will complete before the vCPU bails out to
userspace.  But, the very act of killing the guest can also cause data
corruption, e.g. due to lack of file writeback before termination, so
taking on additional complexity to cleanly bail out of the emulator isn't
justified, the goal is purely to stem the bleeding and alert userspace
that something has gone horribly wrong, i.e. to avoid _silent_ data
corruption.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220526210817.3428868-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reduce the number of GPRs emulated by 32-bit KVM from 16 to 8.  KVM does
not support emulating 64-bit mode on 32-bit host kernels, and so should
never generate accesses to R8-15.

Opportunistically use NR_EMULATOR_GPRS in rsm_load_state_{32,64}() now
that it is precise and accurate for both flavors.

Wrap the definition with full #ifdef ugliness; sadly, IS_ENABLED()
doesn't guarantee a compile-time constant as far as BUILD_BUG_ON() is
concerned.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20220526210817.3428868-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use a u16 instead of a u32 to track the dirty/valid status of GPRs in the
emulator.  Unlike struct kvm_vcpu_arch, x86_emulate_ctxt tracks only the
"true" GPRs, i.e. doesn't include RIP in its array, and so only needs to
track 16 registers.

Note, maxing out at 16 GPRs is a fundamental property of x86-64 and will
not change barring a massive architecture update.  Legacy x86 ModRM and
SIB encodings use 3 bits for GPRs, i.e. support 8 registers.  x86-64 uses
a single bit in the REX prefix for each possible reference type to double
the number of supported GPRs to 16 registers (4 bits).
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220526210817.3428868-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Omit RIP from the emulator's _regs array, which is used only for GPRs,
i.e. registers that can be referenced via ModRM and/or SIB bytes.  The
emulator uses the dedicated _eip field for RIP, and manually reads from
_eip to handle RIP-relative addressing.

To avoid an even bigger, slightly more dangerous change, hardcode the
number of GPRs to 16 for the time being even though 32-bit KVM's emulator
technically should only have 8 GPRs.  Add a TODO to address that in a
future commit.

See also the comments above the read_gpr() and write_gpr() declarations,
and obviously the handling in writeback_registers().

No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20220526210817.3428868-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

WARN and truncate the incoming GPR number/index when reading/writing GPRs
in the emulator to guard against KVM bugs, e.g. to avoid out-of-bounds
accesses to ctxt->_regs[] if KVM generates a bogus index.  Truncate the
index instead of returning e.g. zero, as reg_write() returns a pointer
to the register, i.e. returning zero would result in a NULL pointer
dereference.  KVM could also force the index to any arbitrary GPR, but
that's no better or worse, just different.

Open code the restriction to 16 registers; RIP is handled via _eip and
should never be accessed through reg_read() or reg_write().  See the
comments above the declarations of reg_read() and reg_write(), and the
behavior of writeback_registers().  The horrific open coded mess will be
cleaned up in a future commit.

There are no such bugs known to exist in the emulator, but determining
that KVM is bug-free is not at all simple and requires a deep dive into
the emulator.  The code is so convoluted that GCC-12 with the recently
enable -Warray-bounds spits out a false-positive due to a GCC bug:

  arch/x86/kvm/emulate.c:254:27: warning: array subscript 32 is above array
                                 bounds of 'long unsigned int[17]' [-Warray-bounds]
    254 |         return ctxt->_regs[nr];
        |                ~~~~~~~~~~~^~~~
  In file included from arch/x86/kvm/emulate.c:23:
  arch/x86/kvm/kvm_emulate.h: In function 'reg_rmw':
  arch/x86/kvm/kvm_emulate.h:366:23: note: while referencing '_regs'
    366 |         unsigned long _regs[NR_VCPU_REGS];
        |                       ^~~~~

Link: https://lore.kernel.org/all/YofQlBrlx18J7h9Y@google.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216026
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679Reported-and-tested-by: Robert Dinse <nanook@eskimo.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220526210817.3428868-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Capture ctxt->regs_dirty in a local 'unsigned long' instead of casting it
to an 'unsigned long *' for use in for_each_set_bit().  The bitops helpers
really do read the entire 'unsigned long', even though the walking of the
read value is capped at the specified size.  I.e. 64-bit KVM is reading
memory beyond ctxt->regs_dirty, which is a u32 and thus 4 bytes, whereas
an unsigned long is 8 bytes.  Functionally it's not an issue because
regs_dirty is in the middle of x86_emulate_ctxt, i.e. KVM is just reading
its own memory, but relying on that coincidence is gross and unsafe.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220526210817.3428868-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

s390:

* add an interface to provide a hypervisor dump for secure guests

* improve selftests to show tests

x86:

* Intel IPI virtualization

* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS

* PEBS virtualization

* Simplify PMU emulation by just using PERF_TYPE_RAW events

* More accurate event reinjection on SVM (avoid retrying instructions)

* Allow getting/setting the state of the speaker port data bit

* Rewrite gfn-pfn cache refresh

* Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent

* "Notify" VM exit