- 22 Oct, 2015 40 commits
-
-
John Flatness authored
commit e8ff581f upstream. The MacBookPro 12,1 has the same setup as the 11 for controlling the status of the optical audio light. Simply apply the existing workaround to the subsystem ID for the 12,1. [sorted the fixup entry by tiwai] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105401Signed-off-by:
John Flatness <john@zerocrates.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laura Abbott authored
commit d05ea7da upstream. Much like all the other Lenovo laptops, add a quirk to make sound work with docking. Reported-and-tested-by: lacknerflo@gmail.com Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
-
Takashi Iwai authored
commit 225db576 upstream. When OSS emulation is loaded on ISA SB AWE32 chip, we get now kernel warnings like: WARNING: CPU: 0 PID: 2791 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x51/0x80() sysfs: cannot create duplicate filename '/devices/isa/sbawe.0/sound/card0/seq-oss-0-0' It's because both emux synth and opl3 drivers try to register their OSS device object with the same static index number 0. This hasn't been a big problem until the recent rewrite of device management code (that exposes sysfs at the same time), but it's been an obvious bug. This patch works around it just by using a different index number of emux synth object. There can be a more elegant way to fix, but it's enough for now, as this code won't be touched so often, in anyway. Reported-and-tested-by:
Michael Shell <list1@michaelshell.org> Signed-off-by:
-
Takashi Iwai authored
commit 7f57d803 upstream. Lenovo Thinkpads with recent Realtek codecs seem suffering from click noises at power transition since the introduction of widget power saving in 4.1 kernel. Although this might be solved by some delays in appropriate points, as a quick workaround, just disable the power_save_node feature for now. The gain it gives is relatively small, and this makes the situation back to pre 4.1 time. This patch ended up with a bit more code changes than usual because the existing fixup for Thinkpads is highly chained. Instead of adding yet another chain, combine a few of them into a single fixup entry, as a gratis cleanup. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=943982Signed-off-by:
-
Mel Gorman authored
commit 2f84a899 upstream. SunDong reported the following on https://bugzilla.kernel.org/show_bug.cgi?id=103841 I think I find a linux bug, I have the test cases is constructed. I can stable recurring problems in fedora22(4.0.4) kernel version, arch for x86_64. I construct transparent huge page, when the parent and child process with MAP_SHARE, MAP_PRIVATE way to access the same huge page area, it has the opportunity to lead to huge page copy on write failure, and then it will munmap the child corresponding mmap area, but then the child mmap area with VM_MAYSHARE attributes, child process munmap this area can trigger VM_BUG_ON in set_vma_resv_flags functions (vma - > vm_flags & VM_MAYSHARE). There were a number of problems with the report (e.g. it's hugetlbfs that triggers this, not transparent huge pages) but it was fundamentally correct in that a VM_BUG_ON in set_vma_resv_flags() can be triggered that looks like this vma ffff8804651fd0d0 start 00007fc474e00000 end 00007fc475e00000 next ffff8804651fd018 prev ffff8804651fd188 mm ffff88046b1b1800 prot 8000000000000027 anon_vma (null) vm_ops ffffffff8182a7a0 pgoff 0 file ffff88106bdb9800 private_data (null) flags: 0x84400fb(read|write|shared|mayread|maywrite|mayexec|mayshare|dontexpand|hugetlb) ------------ kernel BUG at mm/hugetlb.c:462! SMP Modules linked in: xt_pkttype xt_LOG xt_limit [..] CPU: 38 PID: 26839 Comm: map Not tainted 4.0.4-default #1 Hardware name: Dell Inc. PowerEdge R810/0TT6JF, BIOS 2.7.4 04/26/2012 set_vma_resv_flags+0x2d/0x30 The VM_BUG_ON is correct because private and shared mappings have different reservation accounting but the warning clearly shows that the VMA is shared. When a private COW fails to allocate a new page then only the process that created the VMA gets the page -- all the children unmap the page. If the children access that data in the future then they get killed. The problem is that the same file is mapped shared and private. During the COW, the allocation fails, the VMAs are traversed to unmap the other private pages but a shared VMA is found and the bug is triggered. This patch identifies such VMAs and skips them. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
SunDong <sund_sky@126.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Rientjes <rientjes@google.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Joseph Qi authored
commit 012572d4 upstream. The order of the following three spinlocks should be: dlm_domain_lock < dlm_ctxt->spinlock < dlm_lock_resource->spinlock But dlm_dispatch_assert_master() is called while holding dlm_ctxt->spinlock and dlm_lock_resource->spinlock, and then it calls dlm_grab() which will take dlm_domain_lock. Once another thread (for example, dlm_query_join_handler) has already taken dlm_domain_lock, and tries to take dlm_ctxt->spinlock deadlock happens. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: "Junxiao Bi" <junxiao.bi@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
commit d046b770 upstream. The check for invoking iommu->lazy_flush() from iommu_tbl_range_alloc() has to be refactored so that we only call ->lazy_flush() if it is non-null. I had a sparc kernel that was crashing when I was trying to process some very large perf.data files- the crash happens when the scsi driver calls into dma_4v_map_sg and thus the iommu_tbl_range_alloc(). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Naoya Horiguchi authored
commit 3aaa76e1 upstream. Since commit bcc54222 ("mm: hugetlb: introduce page_huge_active") each hugetlb page maintains its active flag to avoid a race condition betwe= en multiple calls of isolate_huge_page(), but current kernel doesn't set the f= lag on a hugepage allocated by migration because the proper putback routine isn= 't called. This means that users could still encounter the race referred to by bcc54222 in this special case, so this patch fixes it. Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active") Signed-off-by:
-
Sudip Mukherjee authored
commit dd85ebf6 upstream. During the last close we are freeing spidev if spidev->spi is NULL, but just before checking if spidev->spi is NULL we are dereferencing it. Lets add a check there to avoid the NULL dereference. Fixes: 91690516 ("spi: spidev: Don't mangle max_speed_hz in underlying spi device") Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Reviewed-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Tan, Jui Nee authored
commit 02bc933e upstream. On Intel Baytrail, there is case when interrupt handler get called, no SPI message is captured. The RX FIFO is indeed empty when RX timeout pending interrupt (SSSR_TINT) happens. Use the BIOS version where both HSUART and SPI are on the same IRQ. Both drivers are using IRQF_SHARED when calling the request_irq function. When running two separate and independent SPI and HSUART application that generate data traffic on both components, user will see messages like below on the console: pxa2xx-spi pxa2xx-spi.0: bad message state in interrupt handler This commit will fix this by first checking Receiver Time-out Interrupt, if it is disabled, ignore the request and return without servicing. Signed-off-by:
Tan, Jui Nee <jui.nee.tan@intel.com> Acked-by:
-
Max Filippov authored
commit b0b48550 upstream. XTFPGA SPI controller has native endian registers. Fix register acessors so that they work in big-endian configurations. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Guenter Roeck authored
commit a394d635 upstream. Actually, spi_master_put() after spi_alloc_master() must _not_ be followed by kfree(). The memory is already freed with the call to spi_master_put() through spi_master_class, which registers a release function. Calling both spi_master_put() and kfree() results in often nasty (and delayed) crashes elsewhere in the kernel, often in the networking stack. This reverts commit eb4af0f5. Link to patch and concerns: https://lkml.org/lkml/2012/9/3/269 or http://lkml.iu.edu/hypermail/linux/kernel/1209.0/00790.html Alexey Klimov: This revert becomes valid after 94c69f76 when spi-imx.c has been fixed and there is no need to call kfree() so comment for spi_alloc_master() should be fixed. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by:
-
Christian Borntraeger authored
commit adc0b7fb upstream. my gcc 5.1 used an ldgr instruction with a register != 0,2,4,6 for spilling/filling into a floating point register in our decompressor. This will cause an AFP-register data exception as the decompressor did not setup the additional floating point registers via cr0. That causes a program check loop that looked like a hang with one "Uncompressing Linux... " message (directly booted via kvm) or a loop of "Uncompressing Linux... " messages (when booted via zipl boot loader). The offending code in my build was 48e400: e3 c0 af ff ff 71 lay %r12,-1(%r10) -->48e406: b3 c1 00 1c ldgr %f1,%r12 48e40a: ec 6c 01 22 02 7f clij %r6,2,12,0x48e64e but gcc could do spilling into an fpr at any function. We can simply disable floating point support at that early stage. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 8d4bd0ed upstream. The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Reported-by:
Stefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
commit 95913d97 upstream. So the problem this patch is trying to address is as follows: CPU0 CPU1 context_switch(A, B) ttwu(A) LOCK A->pi_lock A->on_cpu == 0 finish_task_switch(A) prev_state = A->state <-. WMB | A->on_cpu = 0; | UNLOCK rq0->lock | | context_switch(C, A) `-- A->state = TASK_DEAD prev_state == TASK_DEAD put_task_struct(A) context_switch(A, C) finish_task_switch(A) A->state == TASK_DEAD put_task_struct(A) The argument being that the WMB will allow the load of A->state on CPU0 to cross over and observe CPU1's store of A->state, which will then result in a double-drop and use-after-free. Now the comment states (and this was true once upon a long time ago) that we need to observe A->state while holding rq->lock because that will order us against the wakeup; however the wakeup will not in fact acquire (that) rq->lock; it takes A->pi_lock these days. We can obviously fix this by upgrading the WMB to an MB, but that is expensive, so we'd rather avoid that. The alternative this patch takes is: smp_store_release(&A->on_cpu, 0), which avoids the MB on some archs, but not important ones like ARM. Reported-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit e5b5a61f upstream. Devices found by class_find_device must be freed with put_device(). Otherwise the reference count will not work properly. Fixes: a96aa64c ("leds/led-class: Handle LEDs with the same name") Reported-by:
Alan Tull <delicious.quinoa@gmail.com> Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 0b34a166 upstream. Currently there is a number of issues preventing PVHVM Xen guests from doing successful kexec/kdump: - Bound event channels. - Registered vcpu_info. - PIRQ/emuirq mappings. - shared_info frame after XENMAPSPACE_shared_info operation. - Active grant mappings. Basically, newly booted kernel stumbles upon already set up Xen interfaces and there is no way to reestablish them. In Xen-4.7 a new feature called 'soft reset' is coming. A guest performing kexec/kdump operation is supposed to call SCHEDOP_shutdown hypercall with SHUTDOWN_soft_reset reason before jumping to new kernel. Hypervisor (with some help from toolstack) will do full domain cleanup (but keeping its memory and vCPU contexts intact) returning the guest to the state it had when it was first booted and thus allowing it to start over. Doing SHUTDOWN_soft_reset on Xen hypervisors which don't support it is probably OK as by default all unknown shutdown reasons cause domain destroy with a message in toolstack log: 'Unknown shutdown reason code 5. Destroying domain.' which gives a clue to what the problem is and eliminates false expectations. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Stephen Smalley authored
commit ab76f7b4 upstream. Unused space between the end of __ex_table and the start of rodata can be left W+x in the kernel page tables. Extend the setting of the NX bit to cover this gap by starting from text_end rather than rodata_start. Before: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB x pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd After: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB NX pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443704662-3138-1-git-send-email-sds@tycho.nsa.govSigned-off-by:
-
Thomas Gleixner authored
commit eddd3826 upstream. Dmitry Vyukov reported the following using trinity and the memory error detector AddressSanitizer (https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel). [ 124.575597] ERROR: AddressSanitizer: heap-buffer-overflow on address ffff88002e280000 [ 124.576801] ffff88002e280000 is located 131938492886538 bytes to the left of 28857600-byte region [ffffffff81282e0a, ffffffff82e0830a) [ 124.578633] Accessed by thread T10915: [ 124.579295] inlined in describe_heap_address ./arch/x86/mm/asan/report.c:164 [ 124.579295] #0 ffffffff810dd277 in asan_report_error ./arch/x86/mm/asan/report.c:278 [ 124.580137] #1 ffffffff810dc6a0 in asan_check_region ./arch/x86/mm/asan/asan.c:37 [ 124.581050] #2 ffffffff810dd423 in __tsan_read8 ??:0 [ 124.581893] #3 ffffffff8107c093 in get_wchan ./arch/x86/kernel/process_64.c:444 The address checks in the 64bit implementation of get_wchan() are wrong in several ways: - The lower bound of the stack is not the start of the stack page. It's the start of the stack page plus sizeof (struct thread_info) - The upper bound must be: top_of_stack - TOP_OF_KERNEL_STACK_PADDING - 2 * sizeof(unsigned long). The 2 * sizeof(unsigned long) is required because the stack pointer points at the frame pointer. The layout on the stack is: ... IP FP ... IP FP. So we need to make sure that both IP and FP are in the bounds. Fix the bound checks and get rid of the mix of numeric constants, u64 and unsigned long. Making all unsigned long allows us to use the same function for 32bit as well. Use READ_ONCE() when accessing the stack. This does not prevent a concurrent wakeup of the task and the stack changing, but at least it avoids TOCTOU. Also check task state at the end of the loop. Again that does not prevent concurrent changes, but it avoids walking for nothing. Add proper comments while at it. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Based-on-patch-from: Wolfram Gloger <wmglo@dent.med.uni-muenchen.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Borislav Petkov <bp@alien8.de> Reviewed-by:
-
Lee, Chun-Yi authored
commit e3c41e37 upstream. The original bug is a page fault crash that sometimes happens on big machines when preparing ELF headers: BUG: unable to handle kernel paging request at ffffc90613fc9000 IP: [<ffffffff8103d645>] prepare_elf64_ram_headers_callback+0x165/0x260 The bug is caused by us under-counting the number of memory ranges and subsequently not allocating enough ELF header space for them. The bug is typically masked on smaller systems, because the ELF header allocation is rounded up to the next page. This patch modifies the code in fill_up_crash_elf_data() by using walk_system_ram_res() instead of walk_system_ram_range() to correctly count the max number of crash memory ranges. That's because the walk_system_ram_range() filters out small memory regions that reside in the same page, but walk_system_ram_res() does not. Here's how I found the bug: After tracing prepare_elf64_headers() and prepare_elf64_ram_headers_callback(), the code uses walk_system_ram_res() to fill-in crash memory regions information to the program header, so it counts those small memory regions that reside in a page area. But, when the kernel was using walk_system_ram_range() in fill_up_crash_elf_data() to count the number of crash memory regions, it filters out small regions. I printed those small memory regions, for example: kexec: Get nr_ram ranges. vaddr=0xffff880077592258 paddr=0x77592258, sz=0xdc0 Based on the code in walk_system_ram_range(), this memory region will be filtered out: pfn = (0x77592258 + 0x1000 - 1) >> 12 = 0x77593 end_pfn = (0x77592258 + 0xfc0 -1 + 1) >> 12 = 0x77593 end_pfn - pfn = 0x77593 - 0x77593 = 0 <=== if (end_pfn > pfn) is FALSE So, the max_nr_ranges that's counted by the kernel doesn't include small memory regions - causing us to under-allocate the required space. That causes the page fault crash that happens in a later code path when preparing ELF headers. This bug is not easy to reproduce on small machines that have few CPUs, because the allocated page aligned ELF buffer has more free space to cover those small memory regions' PT_LOAD headers. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443531537-29436-1-git-send-email-jlee@suse.comSigned-off-by:
-
Matt Fleming authored
commit a5caa209 upstream. Beginning with UEFI v2.5 EFI_PROPERTIES_TABLE was introduced that signals that the firmware PE/COFF loader supports splitting code and data sections of PE/COFF images into separate EFI memory map entries. This allows the kernel to map those regions with strict memory protections, e.g. EFI_MEMORY_RO for code, EFI_MEMORY_XP for data, etc. Unfortunately, an unwritten requirement of this new feature is that the regions need to be mapped with the same offsets relative to each other as observed in the EFI memory map. If this is not done crashes like this may occur, BUG: unable to handle kernel paging request at fffffffefe6086dd IP: [<fffffffefe6086dd>] 0xfffffffefe6086dd Call Trace: [<ffffffff8104c90e>] efi_call+0x7e/0x100 [<ffffffff81602091>] ? virt_efi_set_variable+0x61/0x90 [<ffffffff8104c583>] efi_delete_dummy_variable+0x63/0x70 [<ffffffff81f4e4aa>] efi_enter_virtual_mode+0x383/0x392 [<ffffffff81f37e1b>] start_kernel+0x38a/0x417 [<ffffffff81f37495>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81f37582>] x86_64_start_kernel+0xeb/0xef Here 0xfffffffefe6086dd refers to an address the firmware expects to be mapped but which the OS never claimed was mapped. The issue is that included in these regions are relative addresses to other regions which were emitted by the firmware toolchain before the "splitting" of sections occurred at runtime. Needless to say, we don't satisfy this unwritten requirement on x86_64 and instead map the EFI memory map entries in reverse order. The above crash is almost certainly triggerable with any kernel newer than v3.13 because that's when we rewrote the EFI runtime region mapping code, in commit d2f7cbe7 ("x86/efi: Runtime services virtual mapping"). For kernel versions before v3.13 things may work by pure luck depending on the fragmentation of the kernel virtual address space at the time we map the EFI regions. Instead of mapping the EFI memory map entries in reverse order, where entry N has a higher virtual address than entry N+1, map them in the same order as they appear in the EFI memory map to preserve this relative offset between regions. This patch has been kept as small as possible with the intention that it should be applied aggressively to stable and distribution kernels. It is very much a bugfix rather than support for a new feature, since when EFI_PROPERTIES_TABLE is enabled we must map things as outlined above to even boot - we have no way of asking the firmware not to split the code/data regions. In fact, this patch doesn't even make use of the more strict memory protections available in UEFI v2.5. That will come later. Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by:
Matt Fleming <matt.fleming@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chun-Yi <jlee@suse.com> Cc: Dave Young <dyoung@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: James Bottomley <JBottomley@Odin.com> Cc: Lee, Chun-Yi <jlee@suse.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443218539-7610-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
-
Dirk Müller authored
commit d2922422 upstream. The cpu feature flags are not ever going to change, so warning everytime can cause a lot of kernel log spam (in our case more than 10GB/hour). The warning seems to only occur when nested virtualization is enabled, so it's probably triggered by a KVM bug. This is a sensible and safe change anyway, and the KVM bug fix might not be suitable for stable releases anyway. Signed-off-by:
Dirk Mueller <dmueller@suse.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andy Lutomirski authored
commit 83c133cf upstream. The NMI entry code that switches to the normal kernel stack needs to be very careful not to clobber any extra stack slots on the NMI stack. The code is fine under the assumption that SWAPGS is just a normal instruction, but that assumption isn't really true. Use SWAPGS_UNSAFE_STACK instead. This is part of a fix for some random crashes that Sasha saw. Fixes: 9b6e6a83 ("x86/nmi/64: Switch stacks on userspace NMI entry") Reported-and-tested-by:
Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/974bc40edffdb5c2950a5c4977f821a446b76178.1442791737.git.luto@kernel.orgSigned-off-by:
-
Andy Lutomirski authored
commit fc57a7c6 upstream. PARAVIRT_ADJUST_EXCEPTION_FRAME generates this code (using nmi as an example, trimmed for readability): ff 15 00 00 00 00 callq *0x0(%rip) # 2796 <nmi+0x6> 2792: R_X86_64_PC32 pv_irq_ops+0x2c That's a call through a function pointer to regular C function that does nothing on native boots, but that function isn't protected against kprobes, isn't marked notrace, and is certainly not guaranteed to preserve any registers if the compiler is feeling perverse. This is bad news for a CLBR_NONE operation. Of course, if everything works correctly, once paravirt ops are patched, it gets nopped out, but what if we hit this code before paravirt ops are patched in? This can potentially cause breakage that is very difficult to debug. A more subtle failure is possible here, too: if _paravirt_nop uses the stack at all (even just to push RBP), it will overwrite the "NMI executing" variable if it's called in the NMI prologue. The Xen case, perhaps surprisingly, is fine, because it's already written in asm. Fix all of the cases that default to paravirt_nop (including adjust_exception_frame) with a big hammer: replace paravirt_nop with an asm function that is just a ret instruction. The Xen case may have other problems, so document them. This is part of a fix for some random crashes that Sasha saw. Reported-and-tested-by:
-
David Woodhouse authored
commit 03da3ff1 upstream. In 2007, commit 07190a08 ("Mark TSC on GeodeLX reliable") bypassed verification of the TSC on Geode LX. However, this code (now in the check_system_tsc_reliable() function in arch/x86/kernel/tsc.c) was only present if CONFIG_MGEODE_LX was set. OpenWRT has recently started building its generic Geode target for Geode GX, not LX, to include support for additional platforms. This broke the timekeeping on LX-based devices, because the TSC wasn't marked as reliable: https://dev.openwrt.org/ticket/20531 By adding a runtime check on is_geode_lx(), we can also include the fix if CONFIG_MGEODEGX1 or CONFIG_X86_GENERIC are set, thus fixing the problem. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Cc: Andres Salomon <dilinger@queued.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1442409003.131189.87.camel@infradead.orgSigned-off-by:
-
Thomas Gleixner authored
commit 66c117d7 upstream. Richard reported the following crash: [ 0.036000] BUG: unable to handle kernel paging request at 55501e06 [ 0.036000] IP: [<c0aae48b>] common_interrupt+0xb/0x38 [ 0.036000] Call Trace: [ 0.036000] [<c0409c80>] ? add_nops+0x90/0xa0 [ 0.036000] [<c040a054>] apply_alternatives+0x274/0x630 Chuck decoded: " 0: 8d 90 90 83 04 24 lea 0x24048390(%eax),%edx 6: 80 fc 0f cmp $0xf,%ah 9: a8 0f test $0xf,%al >> b: a0 06 1e 50 55 mov 0x55501e06,%al 10: 57 push %edi 11: 56 push %esi Interrupt 0x30 occurred while the alternatives code was replacing the initial 0x90,0x90,0x90 NOPs (from the ASM_CLAC macro) with the optimized version, 0x8d,0x76,0x00. Only the first byte has been replaced so far, and it makes a mess out of the insn decoding." optimize_nops() is buggy in two aspects: - It's not disabling interrupts across the modification - It's lacking a sync_core() call Add both. Fixes: 4fd4b6e5 'x86/alternatives: Use optimized NOPs for padding' Reported-and-tested-by:
"Richard W.M. Jones" <rjones@redhat.com> Signed-off-by:
-
Shaohua Li authored
commit 5d7c631d upstream. The APIC LVTT register is MMIO mapped but the TSC_DEADLINE register is an MSR. The write to the TSC_DEADLINE MSR is not serializing, so it's not guaranteed that the write to LVTT has reached the APIC before the TSC_DEADLINE MSR is written. In such a case the write to the MSR is ignored and as a consequence the local timer interrupt never fires. The SDM decribes this issue for xAPIC and x2APIC modes. The serialization methods recommended by the SDM differ. xAPIC: "1. Memory-mapped write to LVT Timer Register, setting bits 18:17 to 10b. 2. WRMSR to the IA32_TSC_DEADLINE MSR a value much larger than current time-stamp counter. 3. If RDMSR of the IA32_TSC_DEADLINE MSR returns zero, go to step 2. 4. WRMSR to the IA32_TSC_DEADLINE MSR the desired deadline." x2APIC: "To allow for efficient access to the APIC registers in x2APIC mode, the serializing semantics of WRMSR are relaxed when writing to the APIC registers. Thus, system software should not use 'WRMSR to APIC registers in x2APIC mode' as a serializing instruction. Read and write accesses to the APIC registers will occur in program order. A WRMSR to an APIC register may complete before all preceding stores are globally visible; software can prevent this by inserting a serializing instruction, an SFENCE, or an MFENCE before the WRMSR." The xAPIC method is to just wait for the memory mapped write to hit the LVTT by checking whether the MSR write has reached the hardware. There is no reason why a proper MFENCE after the memory mapped write would not do the same. Andi Kleen confirmed that MFENCE is sufficient for the xAPIC case as well. Issue MFENCE before writing to the TSC_DEADLINE MSR. This can be done unconditionally as all CPUs which have TSC_DEADLINE also have MFENCE support. [ tglx: Massaged the changelog ] Signed-off-by:
Shaohua Li <shli@fb.com> Reviewed-by:
-
Andy Shevchenko authored
commit 6bea0f6d upstream. In case we have less than maximum allowed channels (8) and autoconfiguration is enabled the DWC_PARAMS read is wrong because it uses different arithmetic to what is needed for channel priority setup. Re-do the caclulations properly. This now works on AVR32 board well. Fixes: fed2574b (dw_dmac: introduce software emulation of LLP transfers) Cc: yitian.bu@tangramtek.com Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Jeff Moyer authored
commit f0b2e563 upstream. The dax code doesn't currently support misaligned partitions, so disable O_DIRECT via dax until such time as that support materializes. Suggested-by:
Boaz Harrosh <boaz@plexistor.com> Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Felipe F. Tonello authored
commit 0af82211 upstream. This fixes a duplicated pin control causing this error: imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already requested by regulators:regulator@2; cannot claim for 2184000.usb imx6q-pinctrl 20e0000.iomuxc: pin-137 (2184000.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 137 (MX6Q_PAD_GPIO_1) from group usbotggrp on device 20e0000.iomuxc imx_usb 2184000.usb: Error applying setting, reverse things back imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_EIM_D31 already requested by regulators:regulator@1; cannot claim for 2184200.usb imx6q-pinctrl 20e0000.iomuxc: pin-52 (2184200.usb) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 52 (MX6Q_PAD_EIM_D31) from group usbh1grp on device 20e0000.iomuxc imx_usb 2184200.usb: Error applying setting, reverse things back Signed-off-by:
Felipe F. Tonello <eu@felipetonello.com> Fixes: e2047e33 ("ARM: dts: add initial Rex Pro board support") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Chanho Park authored
commit 833b5794 upstream. The cpu booting of exynos5422 has been still broken since we discussed it in last year[1]. This patch is inspired from Odroid XU3 code (Actually, it was from samsung exynos vendor kernel)[2]. This weird reset code was founded exynos5420 octa cores series SoCs and only required for the first boot core is the Little core (Cortex A7). Some of the exynos5420 boards and all of the exynos5422 boards will require this code. There is two ways to check the little core is the first cpu. One is checking GPG2CON[1] GPIO value and the other is checking the cluster number of the first cpu. I selected the latter because it's more easier than the former. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/350632.html [2] https://patchwork.kernel.org/patch/6782891/ Cc: Kevin Hilman <khilman@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Chanho Park <parkch98@gmail.com> [k.kozlowski: Adding stable for v4.1+, reformat comment] Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Carl Frederik Werner authored
commit 3a2fa775 upstream. Let's fix pinmux address of gpio 170 used by tfp410 powerdown-gpio. According to the OMAP35x Technical Reference Manual CONTROL_PADCONF_I2C3_SDA[15:0] 0x480021C4 mode0: i2c3_sda CONTROL_PADCONF_I2C3_SDA[31:16] 0x480021C4 mode4: gpio_170 the pinmux address of gpio 170 must be 0x480021C6. The former wrong address broke i2c3 (used by hdmi ddc), resulting in kernel message: omap_i2c 48060000.i2c: controller timed out Fixes: 8cecf52b ("ARM: omap3-beagle.dts: add display information") Signed-off-by:
Carl Frederik Werner <frederik@cfbw.eu> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Grazvydas Ignotas authored
commit 1dbdad75 upstream. The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the pins up, communication with tca6424a doesn't work (controller timeouts) and it is not possible to enable HDMI. Fixes: 9be495c4 ("ARM: dts: omap5-evm: Add I2c pinctrl data") Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
-
Doug Anderson authored
commit 7ae85dc7 upstream. In (23a4e405 arm: kgdb: Handle read-only text / modules) we moved to using patch_text() to set breakpoints so that we could handle the case when we had CONFIG_DEBUG_RODATA. That patch used patch_text(). Unfortunately, patch_text() assumes that we're not in atomic context when it runs since it needs to grab a mutex and also wait for other CPUs to stop (which it does with a completion). This would result in a stack crawl if you had CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb. The crawl looked something like: BUG: scheduling while atomic: swapper/0/0/0x00010007 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34b #1073 Hardware name: Rockchip (Device Tree) (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24) (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8) (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c) (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668) (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4) (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234) (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188) (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24) (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70) (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54) (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8) (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44) (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34) (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c) (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60) (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc) (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4) (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c) (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0) (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c) (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c) (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34) It turns out that when we're in kgdb all the CPUs are stopped anyway so there's no reason we should be calling patch_text(). We can instead directly call __patch_text() which assumes that CPUs have already been stopped. Fixes: 23a4e405 ("arm: kgdb: Handle read-only text / modules") Reported-by:
Aapo Vienamo <avienamo@nvidia.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Paul Bolle authored
commit fe2b5921 upstream. wf_unregister_client() increments the client count when a client unregisters. That is obviously incorrect. Decrement that client count instead. Fixes: 75722d39 ("[PATCH] ppc64: Thermal control for SMU based machines") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ard Biesheuvel authored
commit a077224f upstream. While working on the 32-bit ARM port of UEFI, I noticed a strange corruption in the kernel log. The following snprintf() statement (in drivers/firmware/efi/efi.c:efi_md_typeattr_format()) snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]", was producing the following output in the log: | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | |WB|WT|WC|UC]* | | | | | |WB|WT|WC|UC] |RUN| | | | | | | |UC] |RUN| | | | | | | |UC] As it turns out, this is caused by incorrect code being emitted for the string() function in lib/vsprintf.c. The following code if (!(spec.flags & LEFT)) { while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } } for (i = 0; i < len; ++i) { if (buf < end) *buf = *s; ++buf; ++s; } while (len < spec.field_width--) { if (buf < end) *buf = ' '; ++buf; } when called with len == 0, triggers an issue in the GCC SRA optimization pass (Scalar Replacement of Aggregates), which handles promotion of signed struct members incorrectly. This is a known but as yet unresolved issue. (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932). In this particular case, it is causing the second while loop to be executed erroneously a single time, causing the additional space characters to be printed. So disable the optimization by passing -fno-ipa-sra. Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
Russell King authored
commit 9b55613f upstream. When a kernel is built covering ARMv6 to ARMv7, we omit to clear the IT state when entering a signal handler. This can cause the first few instructions to be conditionally executed depending on the parent context. In any case, the original test for >= ARMv7 is broken - ARMv6 can have Thumb-2 support as well, and an ARMv6T2 specific build would omit this code too. Relax the test back to ARMv6 or greater. This results in us always clearing the IT state bits in the PSR, even on CPUs where these bits are reserved. However, they're reserved for the IT state, so this should cause no harm. Fixes: d71e1352 ("Clear the IT state when invoking a Thumb-2 signal handler") Acked-by:
H. Nikolaus Schaller <hns@goldelico.com> Tested-by:
-
Guenter Roeck authored
commit 728d2940 upstream. The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
Dominik Dingel authored
commit 00cc1633 upstream. Commit 2ee507c4 ("sched: Add function single_task_running to let a task check if it is the only task running on a cpu") referenced the current runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled, that is only allowed if preemption is disabled or the currrent task is bound to the local cpu (e.g. kernel worker). With commit f7819512 ("kvm: add halt_poll_ns module parameter") KVM calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that generates a lot of kernel messages. To avoid adding preemption in that cases, as it would limit the usefulness, we change single_task_running to access directly the cpu local runqueue. Cc: Tim Chen <tim.c.chen@linux.intel.com> Suggested-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
-
Francesco Lavra authored
commit 0919e444 upstream. Commit f2147de3 ("watchdog: sunxi: support parameterized compatible strings") introduced a regression in sunxi_wdt_start(), by which the system reset function of the watchdog is not enabled upon starting the watchdog. As a result, the system is not reset when the watchdog expires. Fix it. Fixes: f2147de3 ("watchdog: sunxi: support parameterized compatible strings") Signed-off-by:
Francesco Lavra <francescolavra.fl@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
