- 17 Mar, 2008 13 commits
-
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Divy Le Ray authored
The last change in the Tx queue stop mechanism opens a window where the Tx queue might be stopped after pending credits returned. Tx credits are returned via a control message generated by the HW. It returns tx credits on demand, triggered by a completion bit set in selective transmit packet headers. The current code can lead to the Tx queue stopped with all pending credits returned, and the current frame not triggering a credit return. The Tx queue will then never be awaken. The driver could alternatively request a completion for packets that stop the queue. It's however safer at this point to go back to the pre-existing behaviour. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stefan Roese authored
Add "ibm,tah" to the compatible matching table of the ibm_newemac tah driver. The type "tah" is still preserved for compatibility reasons. New dts files should use the compatible property though. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jean-Christophe Dubois authored
This patch should resolve a problem that's troubled support for some RNDIS peripherals. It seems to have boiled down to using a variable to establish transfer size limits before it was assigned, which caused those devices to fallback to a default "jumbogram" mode we don't support. Fix by assigning it earlier for RNDIS. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> [ cleanups ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Pravin M. Bathija authored
Problem Description and Fix --------------------------- When a pause packet(with destination as reserved Multicast address) is received by the EMAC hardware to control the flow of frames being transmitted by it, it is dropped by the hardware unless the reserved Multicast address is hashed in to the GAHT[1-4] registers. This code fix adds the default reserved multicast address to the GAHT[1-4] registers in the EMAC(s) present on the chip. The flow control with Pause packets will only work if the following register bits are programmed in EMAC: EMACx_MR1[APP] = 1 EMACx_RMR[BAE] = 1 EMACx_RMR[MAE] = 1 Behavior that may be observed in a running system ------------------------------------------------- A host transferring data from a PPC based system may send a Pause packet to the PPC EMAC requesting it to slow down the flow of packets. If the default reserved multicast MAC address is not programmed into the GAHT[1-4] registers this Pause packet will be dropped by PPC EMAC and no Flow Control will be done. Signed-off-by: Pravin M. Bathija <pbathija@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Julia Lawall authored
The variable update_rx is initialized but never used otherwise. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; identifier i; constant C; @@ ( extern T i; | - T i; <+... when != i - i = C; ...+> ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Julia Lawall authored
The variable gig is initialized but never used otherwise. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; identifier i; constant C; @@ ( extern T i; | - T i; <+... when != i - i = C; ...+> ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
* "powerpc or sparc" is not the same as "big-endian", fix the ifdef * since we tell the card to byteswap the descriptors on big-endian, we ought to leave them host-endian... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
spurious cpu_to_le64() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
kmalloc intermediate buffer(), do copy_from_user() + memcpy_toio() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
pci_unmap_single() on little-endian address Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
- 13 Mar, 2008 1 commit
-
-
Zhang Yanmin authored
Comparing with kernel 2.6.24, tbench result has regression with 2.6.25-rc1. 1) On 2 quad-core processor stoakley: 4%. 2) On 4 quad-core processor tigerton: more than 30%. bisect located below patch. b4ce9277 is first bad commit commit b4ce9277 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Nov 13 21:33:32 2007 -0800 [IPV6]: Move nfheader_len into rt6_info The dst member nfheader_len is only used by IPv6. It's also currently creating a rather ugly alignment hole in struct dst. Therefore this patch moves it from there into struct rt6_info. Above patch changes the cache line alignment, especially member __refcnt. I did a testing by adding 2 unsigned long pading before lastuse, so the 3 members, lastuse/__refcnt/__use, are moved to next cache line. The performance is recovered. I created a patch to rearrange the members in struct dst_entry. With Eric and Valdis Kletnieks's suggestion, I made finer arrangement. 1) Move tclassid under ops in case CONFIG_NET_CLS_ROUTE=y. So sizeof(dst_entry)=200 no matter if CONFIG_NET_CLS_ROUTE=y/n. I tested many patches on my 16-core tigerton by moving tclassid to different place. It looks like tclassid could also have impact on performance. If moving tclassid before metrics, or just don't move tclassid, the performance isn't good. So I move it behind metrics. 2) Add comments before __refcnt. On 16-core tigerton: If CONFIG_NET_CLS_ROUTE=y, the result with below patch is about 18% better than the one without the patch; If CONFIG_NET_CLS_ROUTE=n, the result with below patch is about 30% better than the one without the patch. With 32bit 2.6.25-rc1 on 8-core stoakley, the new patch doesn't introduce regression. Thank Eric, Valdis, and David! Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Acked-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Mar, 2008 3 commits
-
-
Chidambar 'ilLogict' Zinnoury authored
Since the lists are circular, we need to explicitely tag the address to be deleted since we might end up freeing the list head instead. This fixes some interesting SCTP crashes. Signed-off-by: Chidambar 'ilLogict' Zinnoury <illogict@online.fr> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
fs/built-in.o:(.rodata+0x1134): undefined reference to `proc_net_inode_operations' fs/built-in.o:(.rodata+0x1138): undefined reference to `proc_net_operations' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilpo Järvinen authored
With TSO it was possible to send past the receiver window when the skb to be sent was the last in the write queue while the receiver window is the limiting factor. One can notice that there's a loophole in the tcp_mss_split_point that lacked a receiver window check for the tcp_write_queue_tail() if also cwnd was smaller than the full skb. Noticed by Thomas Gleixner <tglx@linutronix.de> in form of "Treason uncloaked! Peer ... shrinks window .... Repaired." messages (the peer didn't actually shrink its window as the message suggests, we had just sent something past it without a permission to do so). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Mar, 2008 4 commits
-
-
Ivo van Doorn authored
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adam Baker authored
On rt73 and rt61 disabling reception of multicast packets also disables broadcast traffic which we never want to do. Therefore we should never disable multicast. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sebastian Siewior authored
|libertas: Invalid CMD_RESP 8012 to command 50! The special case got mixed up in 8a96df80. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 10 Mar, 2008 9 commits
-
-
Patrick McHardy authored
Commit ce7663d8: [NETFILTER]: nfnetlink_queue: don't unregister handler of other subsystem changed nf_unregister_queue_handler to return an error when attempting to unregister a queue handler that is not identical to the one passed in. This is correct in case we really do have a different queue handler already registered, but some existing userspace code always does an unbind before bind and aborts if that fails, so try to be nice and return success in that case. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Similar to the nfnetlink_log problem, nfnetlink_queue incorrectly returns -EPERM when binding or unbinding to an address family and queueing instance 0 exists and is owned by a different process. Unlike nfnetlink_log it previously completes the operation, but it is still incorrect. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
When binding or unbinding to an address family, the res_id is usually set to zero. When logging instance 0 already exists and is owned by a different process, this makes nfunl_recv_config return -EPERM without performing the bind operation. Since no operation on the foreign logging instance itself was requested, this is incorrect. Move bind/unbind commands before the queue instance permissions checks. Also remove an incorrect comment. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pekka Enberg authored
There's a horrible slab abuse in net/netfilter/nf_conntrack_extend.c that can be replaced with a call to ksize(). Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
From: Andrew Schulman <andrex@alumni.utexas.net> xt_time_match() in net/netfilter/xt_time.c in kernel 2.6.24 never matches on Sundays. On my host I have a rule like iptables -A OUTPUT -m time --weekdays Sun -j REJECT and it never matches. The problem is in localtime_2(), which uses r->weekday = (4 + r->dse) % 7; to map the epoch day onto a weekday in {0,...,6}. In particular this gives 0 for Sundays. But 0 has to be wrong; a weekday of 0 can never match. xt_time_match() has if (!(info->weekdays_match & (1 << current_time.weekday))) return false; and when current_time.weekday = 0, the result of the & is always zero, even when info->weekdays_match = XT_TIME_ALL_WEEKDAYS = 0xFE. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Leblond authored
This patch is similar to nfnetlink_queue fixes. It fixes the computation of skb size by using NLMSG_SPACE instead of NLMSG_ALIGN. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Leblond authored
Size of the netlink skb was wrongly computed because the formula was using NLMSG_ALIGN instead of NLMSG_SPACE. NLMSG_ALIGN does not add the room for netlink header as NLMSG_SPACE does. This was causing a failure of message building in some cases. On my test system, all messages for packets in range [8*k+41, 8*k+48] where k is an integer were invalid and the corresponding packets were dropped. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Use __KERNEL__ instead of __KERNEL to make sure the headers are not usable by the kernel. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Mar, 2008 2 commits
-
-
Kirill A. Shutemov authored
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Current /proc/net is done with so called "shadows", but current implementation is broken and has little chances to get fixed. The problem is that dentries subtree of /proc/net directory has fancy revalidation rules to make processes living in different net namespaces see different entries in /proc/net subtree, but currently, tasks see in the /proc/net subdir the contents of any other namespace, depending on who opened the file first. The proposed fix is to turn /proc/net into a symlink, which points to /proc/self/net, which in turn shows what previously was in /proc/net - the network-related info, from the net namespace the appropriate task lives in. # ls -l /proc/net lrwxrwxrwx 1 root root 8 Mar 5 15:17 /proc/net -> self/net In other words - this behaves like /proc/mounts, but unlike "mounts", "net" is not a file, but a directory. Changes from v2: * Fixed discrepancy of /proc/net nlink count and selinux labeling screwup pointed out by Stephen. To get the correct nlink count the ->getattr callback for /proc/net is overridden to read one from the net->proc_net entry. To make selinux still work the net->proc_net entry is initialized properly, i.e. with the "net" name and the proc_net parent. Selinux fixes are Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Changes from v1: * Fixed a task_struct leak in get_proc_task_net, pointed out by Paul. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Mar, 2008 8 commits
-
-
David Howells authored
Fix rxrpc_recvmsg() to return msg_name correctly. We shouldn't overwrite the *msg struct, but should rather write into msg->msg_name (there's a '&' unary operator that shouldn't be there). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Brownell authored
Prevent oops on enc28j60 packet RX: make sure buffers are aligned. Not all architectures support unaligned accesses in kernel space. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Schindler authored
Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Schindler authored
Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Schindler authored
Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Schindler authored
Replaced init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
bnep_sock_cleanup() always returns 0 and its return value isn't used anywhere in the code. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
hci_sock_cleanup() always returns 0 and its return value isn't used anywhere in the code. Compile-tested with 'make allyesconfig && make net/bluetooth/bluetooth.ko' Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-