Fill in core2_hw_cache_event_id[] with the Atom model specific events.

The events can be used in all the tools via the -e (--event) parameter,
for example "-e l1-misses" or -"-e l2-accesses" or "-e l2-write-misses".

( Note: these are straight from the Intel manuals - not tested yet.)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fill in core2_hw_cache_event_id[] with the Core2 model specific events.

The events can be used in all the tools via the -e (--event) parameter,
for example "-e l1-misses" or -"-e l2-accesses" or "-e l2-write-misses".
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Before:

     7549326754  cycles               #    3201.811 M/sec
    10007594937  instructions         #    4244.408 M/sec

After:

     7542051194  cycles               #    3201.996 M/sec
    10007743852  instructions         #    4248.811 M/sec # 1.327 per cycle

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Before:

 $ perf report
 failed to open file: No such file or directory

After:

 $ perf report
  failed to open file: perf.data  (try 'perf record' first)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If perf is run on a !CONFIG_PERF_COUNTER kernel right now it
bails out with no messages or with confusing messages.

Standardize this case some more and explain the situation.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

On architectures/CPUs without PMU support but with perfcounters
enabled 'perf record' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
are enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

On architectures/CPUs without PMU support but with perfcounters
enabled 'perf top' currently fails because it cannot create a
cycle based hw-perfcounter.

Fall back to the cpu-clock-tick sw-perfcounter in this case, which
is hrtimer based and will always work (as long as perfcounters
is enabled).

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Before:

 $ perf stat ~/hackbench 5

 error: syscall returned with -1 (No such device)

After:

 $ perf stat ~/hackbench 5
 Time: 1.640

 Performance counter stats for '/home/mingo/hackbench 5':

    6524.570382  task-clock-ticks     #       3.838 CPU utilization factor
          35704  context-switches     #       0.005 M/sec
            191  CPU-migrations       #       0.000 M/sec
           8958  page-faults          #       0.001 M/sec
  <not counted>  cycles
  <not counted>  instructions
  <not counted>  cache-references
  <not counted>  cache-misses

 Wall-clock time elapsed:  1699.999995 msecs

Also add -v (--verbose) option to allow the printing of failed
counter opens.

Plus dont print 'inf' if wall-time is zero (due to jiffies granularity),
instead skip the printing of the CPU utilization factor.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The first snapshot reading often occur before any events have
been read in the mapped perfcounter files.

Just wait until we have at least one event before starting the
snapshot, or the delay before the first set of entries to be
displayed may be long in case of low refresh rate.

Note: we could also use a semaphore to wait before
"print_entries" number of eveents is reached, but again this
value is tunable and we can't ensure we will even reach it.
Also we could base on a default mimimum set of entries for the
first refresh, say 15, but again, the minimal sample is
tunable, and we could end up displaying nothing until we have a
minimal default set of events, which can take some time in case
of high samples filters.

Hence this simple solution which partially covers the default
case.

[ Impact: fix display artifacts in perf top ]
Signed-off-by: Frederic Weisbecker <fweisbeec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244322643-6447-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Arjan noticed this bug in the perf annotate help output:

    -s, --symbol <file>   symbol to annotate

that should be <symbol> instead.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

the "perf report" utility crashed in some circumstances
because the "sym" stack variable was not initialized before used
(as also proven by valgrind).

With this fix both the crash goes away and valgrind no longer complains.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Right now kernel debug info does not get resolved by default, because
we dont know where to look for the vmlinux.

The -k option can be used for that - but if no option is given, pick
up vmlinux files in the current directory - in case a kernel hacker
runs profiling from the source directory that the kernel was built in.

The real solution would be to embedd the location (and perhaps the
date/timestamp) of the vmlinux file in /proc/kallsyms, so that
tools can pick it up automatically.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

gcc warned about this bug:

util/parse-events.c: In function ‘parse_generic_hw_symbols’:
util/parse-events.c:175: warning: comparison is always false due to limited range of data type
util/parse-events.c:182: warning: comparison is always false due to limited range of data type
util/parse-events.c:190: warning: comparison is always false due to limited range of data type

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Several people have suggested that 'perf' has become a full-fledged
tool that should be moved out of Documentation/. Move it to the
(new) tools/ directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Pick up the latest fixes before the -v8 perfcounters
	      release.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add new perf sub-command to display annotated source code:

 $ perf annotate decode_tree_entry

------------------------------------------------
 Percent |	Source code & Disassembly of /home/mingo/git/git
------------------------------------------------
         :
         :	/home/mingo/git/git:     file format elf64-x86-64
         :
         :
         :	Disassembly of section .text:
         :
         :	00000000004a0da0 <decode_tree_entry>:
         :		*modep = mode;
         :		return str;
         :	}
         :
         :	static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size)
         :	{
    3.82 :	  4a0da0:	41 54                	push   %r12
         :		const char *path;
         :		unsigned int mode, len;
         :
         :		if (size < 24 || buf[size - 21])
    0.17 :	  4a0da2:	48 83 fa 17          	cmp    $0x17,%rdx
         :		*modep = mode;
         :		return str;
         :	}
         :
         :	static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size)
         :	{
    0.00 :	  4a0da6:	49 89 fc             	mov    %rdi,%r12
    0.00 :	  4a0da9:	55                   	push   %rbp
    3.37 :	  4a0daa:	53                   	push   %rbx
         :		const char *path;
         :		unsigned int mode, len;
         :
         :		if (size < 24 || buf[size - 21])
    0.08 :	  4a0dab:	76 73                	jbe    4a0e20 <decode_tree_entry+0x80>
    0.00 :	  4a0dad:	80 7c 16 eb 00       	cmpb   $0x0,-0x15(%rsi,%rdx,1)
    3.48 :	  4a0db2:	75 6c                	jne    4a0e20 <decode_tree_entry+0x80>
         :	static const char *get_mode(const char *str, unsigned int *modep)
         :	{
         :		unsigned char c;
         :		unsigned int mode = 0;
         :
         :		if (*str == ' ')
    1.94 :	  4a0db4:	0f b6 06             	movzbl (%rsi),%eax
    0.39 :	  4a0db7:	3c 20                	cmp    $0x20,%al
    0.00 :	  4a0db9:	74 65                	je     4a0e20 <decode_tree_entry+0x80>
         :			return NULL;
         :
         :		while ((c = *str++) != ' ') {
    0.06 :	  4a0dbb:	89 c2                	mov    %eax,%edx
         :			if (c < '0' || c > '7')
    1.99 :	  4a0dbd:	31 ed                	xor    %ebp,%ebp
         :		unsigned int mode = 0;
         :
         :		if (*str == ' ')
         :			return NULL;
         :
         :		while ((c = *str++) != ' ') {
    1.74 :	  4a0dbf:	48 8d 5e 01          	lea    0x1(%rsi),%rbx
         :			if (c < '0' || c > '7')
    0.00 :	  4a0dc3:	8d 42 d0             	lea    -0x30(%rdx),%eax
    0.17 :	  4a0dc6:	3c 07                	cmp    $0x7,%al
    0.00 :	  4a0dc8:	76 0d                	jbe    4a0dd7 <decode_tree_entry+0x37>
    0.00 :	  4a0dca:	eb 54                	jmp    4a0e20 <decode_tree_entry+0x80>
    0.00 :	  4a0dcc:	0f 1f 40 00          	nopl   0x0(%rax)
   16.57 :	  4a0dd0:	8d 42 d0             	lea    -0x30(%rdx),%eax
    0.14 :	  4a0dd3:	3c 07                	cmp    $0x7,%al
    0.00 :	  4a0dd5:	77 49                	ja     4a0e20 <decode_tree_entry+0x80>
         :				return NULL;
         :			mode = (mode << 3) + (c - '0');
    3.12 :	  4a0dd7:	0f b6 c2             	movzbl %dl,%eax
         :		unsigned int mode = 0;
         :
         :		if (*str == ' ')
         :			return NULL;
         :
         :		while ((c = *str++) != ' ') {
    0.00 :	  4a0dda:	0f b6 13             	movzbl (%rbx),%edx
   16.74 :	  4a0ddd:	48 83 c3 01          	add    $0x1,%rbx
         :			if (c < '0' || c > '7')
         :				return NULL;
         :			mode = (mode << 3) + (c - '0');

The first column is the percentage of samples that arrived on that
particular line - relative to the total cost of the function.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Prepare for the 'perf annotate' implementation by splitting off
builtin-annotate.c from builtin-report.c.

( We keep this commit separate to ease the later librarization
  of the facilities that perf-report and perf-annotate shares. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Also fix a misalignment in usage string printing.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Also add perf list to command-list.txt.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Also update other areas of the help texts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Also standardize the cache printout (so that it can be pasted back
into the command) and sort out the aliases.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf list: List all the available event types which can be used in
-e (--event) options.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.

This is a 3-dimensional space:

       { L1-D, L1-I, L2, ITLB, DTLB, BPU } x
       { load, store, prefetch } x
       { accesses, misses }

User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)

Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.

Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.

( x86 is supported for now, with the Nehalem event table filled in,
  and with Core2 and Atom having placeholder tables. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.

Clean this up by creating a separate attr->type field.

Also clean up the various similarly complex user-space bits
all around counter attribute management.

The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).

(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If perf top is executed with a zero value for the refresh rate,
we get a division by zero exception while computing samples_per_sec.

Also a zero refresh rate is not possible, neither do we want to
accept negative values.

[ Impact: fix division by zero in perf top ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244223061-5399-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

To allow the debugging of frequency-adjusting counters, sample
those adjustments and display them in perf report -D.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In order to allow easy tracking of the period, also provide means of
adding it to the sample data.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The purpose of PERF_SAMPLE_CONFIG was to identify the counters,
since then we've added counter ids, use those instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Turns out that neither PowerPC nor older x86 compilers know this switch
...

and since it does not make a measurable difference, just omit it.
Reported-by: Paul Mackerras <paulus@samba.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

A number of places said 'events' while they should say 'samples'.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Before:

    25.96%  copy_user_generic_string
    15.23%  two_op
    15.19%  one_op
     6.92%  enough_duration
     1.23%  alloc_pages_current
     1.14%  acpi_os_read_port
     1.08%  _spin_lock

After:

    25.96%  [k] copy_user_generic_string
    15.23%  [.] two_op
    15.19%  [.] one_op
     6.92%  [.] enough_duration
     1.23%  [k] alloc_pages_current
     1.14%  [k] acpi_os_read_port
     1.08%  [k] _spin_lock

The '[k]' differentiator is a quick clue that it's a kernel symbol,
without having to bring in the full dso column.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In order to deal with [vdso] maps generalize the ip->symbol path
a bit and allow to override some bits with custom functions.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In order to track the vdso also generate mmap events for
install_special_mapping().
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In order to make arch_vma_name() work from inside
install_special_mapping() we need to set the context.vdso
before calling it.

( This is needed for performance counters to be able to track
  this special executable area. )
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Support frequency-based profiling and make it the default.

(Also add a Hz printout in perf top.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Otherwise the code does not compile on 32-bit boxes.

builtin-report.c: In function 'map__fprintf':
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 3 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 4 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 5 has type 'uint64_t'
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090605033735.GA20451@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>