- 18 Jul, 2022 20 commits
-
-
Sander Vanheule authored
Patch series "cpumask: Fix invalid uniprocessor assumptions", v4. On uniprocessor builds, it is currently assumed that any cpumask will contain the single CPU: cpu0. This assumption is used to provide optimised implementations. The current assumption also appears to be wrong, by ignoring the fact that users can provide empty cpumasks. This can result in bugs as explained in [1] - for_each_cpu() will run one iteration of the loop even when passed an empty cpumask. This series introduces some basic tests, and updates the optimisations for uniprocessor builds. The x86 patch was written after the kernel test robot [2] ran into a failed build. I have tried to list the files potentially affected by the changes to cpumask.h, in an attempt to find any other cases that fail on !SMP. I've gone through some of the files manually, and ran a few cross builds, but nothing else popped up. I (build) checked about half of the potientally affected files, but I do not have the resources to do them all. I hope we can fix other issues if/when they pop up later. [1] https://lore.kernel.org/all/20220530082552.46113-1-sander@svanheule.net/ [2] https://lore.kernel.org/all/202206060858.wA0FOzRy-lkp@intel.com/ This patch (of 5): The maps to keep track of shared caches between CPUs on SMP systems are declared in asm/smp.h, among them specifically cpu_llc_shared_map. These maps are externally defined in cpu/smpboot.c. The latter is only compiled on CONFIG_SMP=y, which means the declared extern symbols from asm/smp.h do not have a corresponding definition on uniprocessor builds. The inline cpu_llc_shared_mask() function from asm/smp.h refers to the map declaration mentioned above. This function is referenced in cacheinfo.c inside for_each_cpu() loop macros, to provide cpumask for the loop. On uniprocessor builds, the symbol for the cpu_llc_shared_map does not exist. However, the current implementation of for_each_cpu() also (wrongly) ignores the provided mask. By sheer luck, the compiler thus optimises out this unused reference to cpu_llc_shared_map, and the linker therefore does not require the cpu_llc_shared_mask to actually exist on uniprocessor builds. Only on SMP bulids does smpboot.o exist to provide the required symbols. To no longer rely on compiler optimisations for successful uniprocessor builds, move the definitions of cpu_llc_shared_map and cpu_l2c_shared_map from smpboot.c to cacheinfo.c. Link: https://lkml.kernel.org/r/cover.1656777646.git.sander@svanheule.net Link: https://lkml.kernel.org/r/e8167ddb570f56744a3dc12c2149a660a324d969.1656777646.git.sander@svanheule.netSigned-off-by:
Sander Vanheule <sander@svanheule.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Marco Elver <elver@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Yury Norov <yury.norov@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Nikolay Borisov authored
When doing cross platform development on a machine sometimes it might be useful to invoke bloat-o-meter for files which haven't been build with the native toolchain. In cases when the host nm doesn't support the target one then a toolchain-specific nm could be used. Add this ability by adding the -p allowing invocations as: ./scripts/bloat-o-meter -p riscv64-unknown-linux-gnu- file1.o file2.o Link: https://lkml.kernel.org/r/20220701113513.1938008-2-nborisov@suse.comSigned-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Nikolay Borisov authored
This will facilitate further extension to the arguments the script takes. As an added benefit it also produces saner usage output, where mutual exclusivity of the c|d|t parameters is clearly visible: ./scripts/bloat-o-meter -h usage: bloat-o-meter [-h] [-c | -d | -t] file1 file2 Simple script used to compare the symbol sizes of 2 object files positional arguments: file1 First file to compare file2 Second file to compare optional arguments: -h, --help show this help message and exit -c categorize output based on symbol type -d Show delta of Data Section -t Show delta of text Section Link: https://lkml.kernel.org/r/20220701113513.1938008-1-nborisov@suse.comSigned-off-by:
-
Benjamin Segall authored
If a process is killed or otherwise exits while having active network connections and many threads waiting on epoll_wait, the threads will all be woken immediately, but not removed from ep->wq. Then when network traffic scans ep->wq in wake_up, every wakeup attempt will fail, and will not remove the entries from the list. This means that the cost of the wakeup attempt is far higher than usual, does not decrease, and this also competes with the dying threads trying to actually make progress and remove themselves from the wq. Handle this by removing visited epoll wq entries unconditionally, rather than only when the wakeup succeeds - the structure of ep_poll means that the only potential loss is the timed_out->eavail heuristic, which now can race and result in a redundant ep_send_events attempt. (But only when incoming data and a timeout actually race, not on every timeout) Shakeel added: : We are seeing this issue in production with real workloads and it has : caused hard lockups. Particularly network heavy workloads with a lot : of threads in epoll_wait() can easily trigger this issue if they get : killed (oom-killed in our case). Link: https://lkml.kernel.org/r/xm26fsjotqda.fsf@google.comSigned-off-by:
Ben Segall <bsegall@google.com> Tested-by:
Shakeel Butt <shakeelb@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Roman Penyaev <rpenyaev@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Khazhismel Kumykov <khazhy@google.com> Cc: Heiher <r@hev.cc> Cc: <stable@kernel.org> Signed-off-by:
-
Yu Zhe authored
Remove unnecessary void* type casting. Link: https://lkml.kernel.org/r/20220628021251.17197-1-yuzhe@nfschina.comSigned-off-by:
Yu Zhe <yuzhe@nfschina.com> Signed-off-by:
-
Tao Liu authored
The total memory size we get in kernel is usually slightly less than the actual memory size because BIOS/firmware will reserve some memory region. So it won't export all memory as usable. E.g, on my x86_64 kvm guest with 1G memory, the total_mem value shows: UEFI boot with ovmf: 0x3faef000 Legacy boot kvm guest: 0x3ff7ec00 When specifying crashkernel=1G-2G:128M, if we have a 1G memory machine, we get total size 1023M from firmware. Then it will not fall into 1G-2G, thus no memory reserved. User will never know this, it is hard to let user know the exact total value in kernel. One way is to use dmi/smbios to get physical memory size, but it's not reliable as well. According to Prarit hardware vendors sometimes screw this up. Thus round up total size to 128M to work around this problem. This patch is a resend of [1] and rebased onto v5.19-rc2, and the original credit goes to Dave Young. [1]: http://lists.infradead.org/pipermail/kexec/2018-April/020568.html Link: https://lkml.kernel.org/r/20220627074440.187222-1-ltao@redhat.comSigned-off-by:
Tao Liu <ltao@redhat.com> Acked-by:
Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by:
-
Alexey Dobriyan authored
Those aren't necessary after seq files won. Link: https://lkml.kernel.org/r/YqnA3mS7KBt8Z4If@localhost.localdomainSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Stephen Brennan authored
The internal kallsyms tables contain information which could be quite useful to a debugging tool in the absence of other debuginfo. If kallsyms is enabled, then a debugging tool could parse it and use it as a fallback symbol table. Combined with BTF data, live & post-mortem debuggers can support basic operations without needing a large DWARF debuginfo file available. As many as five symbols are necessary to properly parse kallsyms names and addresses. Add these to the vmcoreinfo note. CONFIG_KALLSYMS_ABSOLUTE_PERCPU does impact the computation of symbol addresses. However, a debugger can infer this configuration value by comparing the address of _stext in the vmcoreinfo with the address computed via kallsyms. So there's no need to include information about this config value in the vmcoreinfo note. To verify that we're still well below the maximum of 4096 bytes, I created a script[1] to compute a rough upper bound on the possible size of vmcoreinfo. On v5.18-rc7, the script reports 3106 bytes, and with this patch, the maximum become 3370 bytes. [1]: https://github.com/brenns10/kernel_stuff/blob/master/vmcoreinfosize/ Link: https://lkml.kernel.org/r/20220517000508.777145-3-stephen.s.brennan@oracle.comSigned-off-by:
Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by:
-
Stephen Brennan authored
Patch series "Expose kallsyms data in vmcoreinfo note". The kernel can be configured to contain a lot of introspection or debugging information built-in, such as ORC for unwinding stack traces, BTF for type information, and of course kallsyms. Debuggers could use this information to navigate a core dump or live system, but they need to be able to find it. This patch series adds the necessary symbols into vmcoreinfo, which would allow a debugger to find and interpret the kallsyms table. Using the kallsyms data, the debugger can then lookup any symbol, allowing it to find ORC, BTF, or any other useful data. This would allow a live kernel, or core dump, to be debugged without any DWARF debuginfo. This is useful for many cases: the debuginfo may not have been generated, or you may not want to deploy the large files everywhere you need them. I've demonstrated a proof of concept for this at LSF/MM+BPF during a lighting talk. Using a work-in-progress branch of the drgn debugger, and an extended set of BTF generated by a patched version of dwarves, I've been able to open a core dump without any DWARF info and do basic tasks such as enumerating slab caches, block devices, tasks, and doing backtraces. I hope this series can be a first step toward a new possibility of "DWARFless debugging". Related discussion around the BTF side of this: https://lore.kernel.org/bpf/586a6288-704a-f7a7-b256-e18a675927df@oracle.com/T/#u Some work-in-progress branches using this feature: https://github.com/brenns10/dwarves/tree/remove_percpu_restriction_1 https://github.com/brenns10/drgn/tree/kallsyms_plus_btf This patch (of 2): To include kallsyms data in the vmcoreinfo note, we must make the symbol declarations visible outside of kallsyms.c. Move these to a new internal header file. Link: https://lkml.kernel.org/r/20220517000508.777145-1-stephen.s.brennan@oracle.com Link: https://lkml.kernel.org/r/20220517000508.777145-2-stephen.s.brennan@oracle.comSigned-off-by:
-
Colin Ian King authored
There is no need to store the result of the addition back to variable consumed after the addition. The store is redundant, replace += with just + Cleans up clang scan build warning: lib/ts_bm.c:83:11: warning: Although the value stored to 'consumed' is used in the enclosing expression, the value is never actually read from 'consumed' [deadcode.DeadStores] Link: https://lkml.kernel.org/r/20220704215325.600993-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
wuchi authored
commit 4635873c ("scsi: lib/sg_pool.c: improve APIs for allocating sg pool") changeed @(bool)skip_first_chunk of __sg_free_table() to @(unsigned int)nents_first_chunk, so use unsigend int type instead of bool type (false -> 0) when calling the function in sg_free_append_table() and sg_free_table(). Link: https://lkml.kernel.org/r/20220629030241.84559-1-wuchi.zero@gmail.comSigned-off-by:
wuchi <wuchi.zero@gmail.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Cc: Maor Gottlieb <maorg@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Tiezhu Yang authored
LZ4_decompress_safe_forceExtDict() is only used in lib/lz4/lz4_decompress.c, make it static to fix the build warning about "no previous prototype" [1]. [1] https://lore.kernel.org/lkml/202206260948.akgsho1q-lkp@intel.com/ Link: https://lkml.kernel.org/r/1656298965-8698-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
wuchi authored
insert_entries() doesn't use the 'bool replace' argument, and the function is only used locally, remove the argument. The historical context of the unused argument is as follow: 2: commit <3a08cd52> (radix tree: Remove multiorder support) Remove the code related to macro CONFIG_RADIX_TREE_MULTIORDER to convert to the xArray. Without the macro, there is no need to retain the argument. 1: commit <175542f5> (radix-tree: add radix_tree_join) Add insert_entries(..., bool replace) function, depending on the macro CONFIG_RADIX_TREE_MULTIORDER definition, the implementation is different. Notice that the implementation without the macro doesn't use the argument. [Matthew Wilcox: add historical context for argument] Link: https://lkml.kernel.org/r/20220625135324.72574-1-wuchi.zero@gmail.comSigned-off-by:
-
Dan Carpenter authored
The kfifo_to_user() macro is supposed to return zero for success or negative error codes. Unfortunately, there is a signedness bug so it returns unsigned int. This only affects callers which try to save the result in ssize_t and as far as I can see the only place which does that is line6_hwdep_read(). TL;DR: s/_uint/_int/. Link: https://lkml.kernel.org/r/YrVL3OJVLlNhIMFs@kili Fixes: 144ecf31 ("kfifo: fix kfifo_alloc() to return a signed int value") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Stefani Seibold <stefani@seibold.net> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Uros Bizjak authored
The workaround for 'asm goto' miscompilation introduces a compiler barrier quirk that inhibits many useful compiler optimizations. For example, __try_cmpxchg_user compiles to: 11375: 41 8b 4d 00 mov 0x0(%r13),%ecx 11379: 41 8b 02 mov (%r10),%eax 1137c: f0 0f b1 0a lock cmpxchg %ecx,(%rdx) 11380: 0f 94 c2 sete %dl 11383: 84 d2 test %dl,%dl 11385: 75 c4 jne 1134b <...> 11387: 41 89 02 mov %eax,(%r10) where the barrier inhibits flags propagation from asm when compiled with gcc-12. When the mentioned quirk is removed, the following code is generated: 11553: 41 8b 4d 00 mov 0x0(%r13),%ecx 11557: 41 8b 02 mov (%r10),%eax 1155a: f0 0f b1 0a lock cmpxchg %ecx,(%rdx) 1155e: 74 c9 je 11529 <...> 11560: 41 89 02 mov %eax,(%r10) The refered compiler bug: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 was fixed for gcc-4.8.2. Current minimum required version of GCC is version 5.1 which has the above 'asm goto' miscompilation fixed, so remove the workaround. Link: https://lkml.kernel.org/r/20220624141412.72274-1-ubizjak@gmail.comSigned-off-by:
Uros Bizjak <ubizjak@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
wuchi authored
Traversing list without mutex in get_injectable_error_type will race with the following code: list_del_init(&ent->list) kfree(ent) in module_unload_ei_list. So fix that. Link: https://lkml.kernel.org/r/20220620100244.82896-1-wuchi.zero@gmail.comSigned-off-by: -
Vlastimil Babka authored
As Linus explained [1], setting the stackdepot hash table size as a config option is suboptimal, especially as stackdepot becomes a dependency of less "expert" subsystems than initially (e.g. DRM, networking, SLUB_DEBUG): : (a) it introduces a new compile-time question that isn't sane to ask : a regular user, but is now exposed to regular users. : (b) this by default uses 1MB of memory for a feature that didn't in : the past, so now if you have small machines you need to make sure you : make a special kernel config for them. Ideally we would employ rhashtable for fully automatic resizing, which should be feasible for many of the new users, but problematic for the original users with restricted context that call __stack_depot_save() with can_alloc == false, i.e. KASAN. However we can easily remove the config option and scale the hash table automatically with system memory. The STACK_HASH_MASK constant becomes stack_hash_mask variable and is used only in one mask operation, so the overhead should be negligible to none. For early allocation we can employ the existing alloc_large_system_hash() function and perform similar scaling for the late allocation. The existing limits of the config option (between 4k and 1M buckets) are preserved, and scaling factor is set to one bucket per 16kB memory so on 64bit the max 1M buckets (8MB memory) is achieved with 16GB system, while a 1GB system will use 512kB. Because KASAN is reported to need the maximum number of buckets even with smaller amounts of memory [2], set it as such when kasan_enabled(). If needed, the automatic scaling could be complemented with a boot-time kernel parameter, but it feels pointless to add it without a specific use case. [1] https://lore.kernel.org/all/CAHk-=wjC5nS+fnf6EzRD9yQRJApAhxx7gRB87ZV+pAWo9oVrTg@mail.gmail.com/ [2] https://lore.kernel.org/all/CACT4Y+Y4GZfXOru2z5tFPzFdaSUd+GFc6KVL=bsa0+1m197cQQ@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220620150249.16814-1-vbabka@suse.czSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by:
-
wuchi authored
DO_ONCE(func, ...) will call func with spinlock which acquired by spin_lock_irqsave in __do_once_start. But the get_random_once_wait will sleep in get_random_bytes_wait -> wait_for_random_bytes. Fortunately, there is no place to use {net_}get_random_once_wait, so we could remove them simply. Link: https://lkml.kernel.org/r/20220619074641.40916-1-wuchi.zero@gmail.comSigned-off-by:Jakub Kicinski <kuba@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
wuchi authored
When kmem_cache_alloc in function lc_create returns null, we will free the memory already allocated. The loop of kmem_cache_free is wrong, especially: i = 0 ==> do wrong loop i > 0 ==> do not free element[0] Link: https://lkml.kernel.org/r/20220618082521.7082-1-wuchi.zero@gmail.comSigned-off-by:
-
Dan Moulding authored
The gethostname system call returns the hostname for the current machine. However, the kernel has no mechanism to initially set the current machine's name in such a way as to guarantee that the first userspace process to call gethostname will receive a meaningful result. It relies on some unspecified userspace process to first call sethostname before gethostname can produce a meaningful name. Traditionally the machine's hostname is set from userspace by the init system. The init system, in turn, often relies on a configuration file (say, /etc/hostname) to provide the value that it will supply in the call to sethostname. Consequently, the file system containing /etc/hostname usually must be available before the hostname will be set. There may, however, be earlier userspace processes that could call gethostname before the file system containing /etc/hostname is mounted. Such a process will get some other, likely meaningless, name from gethostname (such as "(none)", "localhost", or "darkstar"). A real-world example where this can happen, and lead to undesirable results, is with mdadm. When assembling arrays, mdadm distinguishes between "local" arrays and "foreign" arrays. A local array is one that properly belongs to the current machine, and a foreign array is one that is (possibly temporarily) attached to the current machine, but properly belongs to some other machine. To determine if an array is local or foreign, mdadm may compare the "homehost" recorded on the array with the current hostname. If mdadm is run before the root file system is mounted, perhaps because the root file system itself resides on an md-raid array, then /etc/hostname isn't yet available and the init system will not yet have called sethostname, causing mdadm to incorrectly conclude that all of the local arrays are foreign. Solving this problem *could* be delegated to the init system. It could be left up to the init system (including any init system that starts within an initramfs, if one is in use) to ensure that sethostname is called before any other userspace process could possibly call gethostname. However, it may not always be obvious which processes could call gethostname (for example, udev itself might not call gethostname, but it could via udev rules invoke processes that do). Additionally, the init system has to ensure that the hostname configuration value is stored in some place where it will be readily accessible during early boot. Unfortunately, every init system will attempt to (or has already attempted to) solve this problem in a different, possibly incorrect, way. This makes getting consistently working configurations harder for users. I believe it is better for the kernel to provide the means by which the hostname may be set early, rather than making this a problem for the init system to solve. The option to set the hostname during early startup, via a kernel parameter, provides a simple, reliable way to solve this problem. It also could make system configuration easier for some embedded systems. [dmoulding@me.com: v2] Link: https://lkml.kernel.org/r/20220506060310.7495-2-dmoulding@me.com Link: https://lkml.kernel.org/r/20220505180651.22849-2-dmoulding@me.comSigned-off-by:
Dan Moulding <dmoulding@me.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
- 27 Jun, 2022 1 commit
-
-
akpm authored
-
- 26 Jun, 2022 19 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne" * tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom arm: mach-spear: Add missing of_node_put() in time.c ARM: cns3xxx: Fix refcount leak in cns3xxx_init MAINTAINERS: Update email address arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region ARM: dts: bcm2711-rpi-400: Fix GPIO line names bus: bt1-axi: Don't print error on -EPROBE_DEFER bus: bt1-apb: Don't print error on -EPROBE_DEFER ARM: Fix refcount leak in axxia_boot_secondary ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity ARM: dts: imx6qdl: correct PU regulator ramp delay firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe MAINTAINERS: Update BCM2711/BCM2835 maintainer ... -
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull hotfixes from Andrew Morton: "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc. Fixes for this merge window: - fix for a damon boot hang, from SeongJae - fix for a kfence warning splat, from Jason Donenfeld - fix for zero-pfn pinning, from Alex Williamson - fix for fallocate hole punch clearing, from Mike Kravetz Fixes for previous releases: - fix for a performance regression, from Marcelo - fix for a hwpoisining BUG from zhenwei pi" * tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add entry for Christian Marangi mm/memory-failure: disable unpoison once hw error happens hugetlbfs: zero partial pages during fallocate hole punch mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py mm: re-allow pinning of zero pfns mm/kfence: select random number before taking raw lock MAINTAINERS: add maillist information for LoongArch MAINTAINERS: update MM tree references MAINTAINERS: update Abel Vesa's email MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer MAINTAINERS: add Miaohe Lin as a memory-failure reviewer mailmap: add alias for jarkko@profian.com mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal mm: lru_cache_disable: use synchronize_rcu_expedited mm/page_isolation.c: fix one kernel-doc comment
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Enable ignore_missing_thread in 'perf stat', enabling counting with '--pid' when threads disappear during counting session setup - Adjust output data offset for backward compatibility in 'perf inject' - Fix missing free in copy_kcore_dir() in 'perf inject' - Fix caching files with a wrong build ID - Sync drm, cpufeatures, vhost and svn headers with the kernel * tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers UAPI: Synch KVM's svm.h header with the kernel tools include UAPI: Sync linux/vhost.h with the kernel sources perf stat: Enable ignore_missing_thread perf inject: Adjust output data offset for backward compatibility perf trace beauty: Fix generation of errno id->str table on ALT Linux perf build-id: Fix caching files with a wrong build ID tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources perf inject: Fix missing free in copy_kcore_dir()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - zoned relocation fixes: - fix critical section end for extent writeback, this could lead to out of order write - prevent writing to previous data relocation block group if space gets low - reflink fixes: - fix race between reflinking and ordered extent completion - proper error handling when block reserve migration fails - add missing inode iversion/mtime/ctime updates on each iteration when replacing extents - fix deadlock when running fsync/fiemap/commit at the same time - fix false-positive KCSAN report regarding pid tracking for read locks and data race - minor documentation update and link to new site * tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Documentation: update btrfs list of features and link to readthedocs.io btrfs: fix deadlock with fsync+fiemap+transaction commit btrfs: don't set lock_owner when locking extent buffer for reading btrfs: zoned: fix critical section of relocation inode writeback btrfs: zoned: prevent allocation from previous data relocation BG btrfs: do not BUG_ON() on failure to migrate space when replacing extents btrfs: add missing inode updates on each iteration when replacing extents btrfs: fix race between reflinking and ordered extent completion -
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: - pass the correct size to dma_set_encrypted() when freeing memory (Dexuan Cui) * tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: use the correct size for dma_set_encrypted()
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "Two bug fixes for the pxa3xx and intelfb drivers: - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write - intelfb: Initialize value of stolen size The other changes are small cleanups, simplifications and documentation updates to the cirrusfb, skeletonfb, omapfb, intelfb, au1100fb and simplefb drivers" * tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Remove duplicate 'the' in comment video: fbdev: omapfb: Align '*' in comment video: fbdev: simplefb: Check before clk_put() not needed video: fbdev: au1100fb: Drop unnecessary NULL ptr check video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write video: fbdev: skeletonfb: Convert to generic power management video: fbdev: cirrusfb: Remove useless reference to PCI power management video: fbdev: intelfb: Initialize value of stolen size video: fbdev: intelfb: Use aperture size from pci_resource_len video: fbdev: skeletonfb: Fix syntax errors in comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc architecture fixes from Helge Deller: - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000 machines - flush all mappings of a shared anonymous page on PA8800/8900 machines via flushing the whole data cache. This may slow down such machines but makes sure that the cache is consistent - Fix duplicate definition build error regarding fb_is_primary_device() * tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable ARCH_HAS_STRICT_MODULE_RWX parisc: Fix flush_anon_page on PA8800/PA8900 parisc: align '*' in comment in math-emu code parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
-
https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtensa fixes from Max Filippov: - fix OF reference leaks in xtensa arch code - replace '.bss' with '.section .bss' to fix entry.S build with old assembler * tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: change '.bss' to '.section .bss' xtensa: xtfpga: Fix refcount leak bug in setup xtensa: Fix refcount leak bug in time.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - A fix for a CMA change that broke booting guests with > 2G RAM on Power8 hosts. - Fix the RTAS call filter to allow a special case that applications rely on. - A change to our execve path, to make the execve syscall exit tracepoint work. - Three fixes to wire up our various RNGs earlier in boot so they're available for use in the initial seeding in random_init(). - A build fix for when KASAN is enabled along with STRUCTLEAK_BYREF_ALL. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit Dubey2, Tyrel Datwyler, and Zi Yan. * tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: wire up rng during setup_arch powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address powerpc: Enable execve syscall exit tracepoint powerpc/pseries: wire up rng during setup_arch() powerpc/microwatt: wire up rng during setup_arch() powerpc/mm: Move CMA reservations after initmem_init()
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit - Update the supported arch list in the LLVM document - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS - Avoid false __KSYM___this_module define in include/generated/autoksyms.h * tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Ignore __this_module in gen_autoksyms.sh kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Documentation/llvm: Update Supported Arch table modpost: fix section mismatch check for exported init/exit sections
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat fix from Namjae Jeon: - Use updated exfat_chain directly instead of snapshot values in rename. * tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: use updated exfat_chain directly during renaming
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: "Fixes addressing important multichannel, and reconnect issues. Multichannel mounts when the server network interfaces changed, or ip addresses changed, uncovered problems, especially in reconnect, but the patches for this were held up until recently due to some lock conflicts that are now addressed. Included in this set of fixes: - three fixes relating to multichannel reconnect, dynamically adjusting the list of server interfaces to avoid problems during reconnect - a lock conflict fix related to the above - two important fixes for negotiate on secondary channels (null netname can unintentionally cause multichannel to be disabled to some servers) - a reconnect fix (reporting incorrect IP address in some cases)" * tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs_ses::ip_addr after failover cifs: avoid deadlocks while updating iface cifs: periodically query network interfaces from server cifs: during reconnect, update interface if necessary cifs: change iface_list from array to sorted linked list smb3: use netname when available on secondary channels smb3: fix empty netname context on secondary channels -
Arnaldo Carvalho de Melo authored
To pick up the changes from: d5af44dd ("x86/sev: Provide support for SNP guest request NAEs") 0afb6b66 ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs") dc3f3d24 ("x86/mm: Validate memory when changing the C-bit") cbd3d4f7 ("x86/sev: Check SEV-SNP features support") That gets these new SVM exit reasons: + { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \ + { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \ + { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \ + { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \ + { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \ Addressing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h This causes these changes: CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o LD /tmp/build/perf-urgent/arch/x86/perf-in.o LD /tmp/build/perf-urgent/arch/perf-in.o LD /tmp/build/perf-urgent/perf-in.o LINK /tmp/build/perf-urgent/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
To get the changes in: 84d7c8fd ("vhost-vdpa: introduce uAPI to set group ASID") 2d1fcb77 ("vhost-vdpa: uAPI to get virtqueue group id") a0c95f20 ("vhost-vdpa: introduce uAPI to get the number of address spaces") 3ace88bd ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups") 175d493c ("vhost: move the backend feature bits to vhost_types.h") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h To pick up these changes and support them: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2022-06-26 12:04:35.982003781 -0300 +++ after 2022-06-26 12:04:43.819972476 -0300 @@ -28,6 +28,7 @@ [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", [0x77] = "VDPA_SET_CONFIG_CALL", + [0x7C] = "VDPA_SET_GROUP_ASID", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", @@ -39,5 +40,8 @@ [0x76] = "VDPA_GET_VRING_NUM", [0x78] = "VDPA_GET_IOVA_RANGE", [0x79] = "VDPA_GET_CONFIG_SIZE", + [0x7A] = "VDPA_GET_AS_NUM", + [0x7B] = "VDPA_GET_VRING_GROUP", [0x80] = "VDPA_GET_VQS_COUNT", + [0x81] = "VDPA_GET_GROUP_NUM", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gautam Dawar <gautam.dawar@xilinx.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.orgSigned-off-by:
-
Gang Li authored
perf already support ignore_missing_thread for -p, but not yet applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread for `perf stat -p <pid>`. Committer notes: And here is a refresher about the 'ignore_missing_thread' knob, from a previous patch using it: ca800068 ("perf evsel: Enable ignore_missing_thread for pid option") --- While monitoring a multithread process with pid option, perf sometimes may return sys_perf_event_open failure with 3(No such process) if any of the process's threads die before we open the event. However, we want perf continue monitoring the remaining threads and do not exit with error. --- Signed-off-by:
Gang Li <ligang.bdlg@bytedance.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.comSigned-off-by:
-
Raul Silvera authored
When 'perf inject' creates a new file, it reuses the data offset from the input file. If there has been a change on the size of the header, as happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in a corrupted output file. This change adds the function perf_session__data_offset to compute the data offset based on the current header size, and uses that instead of the offset from the original input file. Signed-off-by:
Raul Silvera <rsilvera@google.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@intel.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
For some reason using: cat <<EoFuncBegin static const char *errno_to_name__$arch(int err) { switch (err) { EoFuncBegin In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT Linux sisyphus (development version), which could be some distro specific glitch, so just get this done in an alternative way that works everywhere while giving notice to the people working on that distro to try and figure our what really took place. Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: -
Adrian Hunter authored
Build ID events associate a file name with a build ID. However, when using perf inject, there is no guarantee that the file on the current machine at the current time has that build ID. Fix by comparing the build IDs and skip adding to the cache if they are different. Example: $ echo "int main() {return 0;}" > prog.c $ gcc -o prog prog.c $ perf record --buildid-all ./prog [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data ] $ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; } $ file-buildid prog 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ echo "int main() {return 1;}" > prog.c $ gcc -o prog prog.c $ file-buildid prog 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 Before: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 $ After: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf $ Fixes: 454c407e ("perf: add perf-inject builtin") Signed-off-by:
-
