- 05 Mar, 2018 31 commits
-
-
kbuild test robot authored
Fixes: 3ecbfd65 ("netfilter: nf_tables: allocate handle and delete objects via handle") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
David S. Miller authored
Antoine Tenart says: ==================== net: mvpp2: jumbo frames support This series enable jumbo frames support in the Marvell PPv2 driver. The first 2 patches rework the buffer management, then two patches prepare for the final patch which adds the jumbo frames support into the driver. This is based on top of net-next, and was tested on a mcbin. Thanks! Antoine Since v1: - Improved the Tx FIFO initialization comment. - Improved the pool sanity check in mvpp2_bm_pool_use(). - Fixed pool related comments. - Cosmetic fixes (used BIT() whenever possible). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
This patch adds the support for jumbo frames in the Marvell PPv2 driver. A third buffer pool is added with 10KB buffers, which is used if the MTU is higher than 1518B for packets larger than 1518B. Please note only the port 0 supports hardware checksum offload due to the Tx FIFO size limitation. Signed-off-by: Stefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
This patch adds the NETIF_F_IPV6_CSUM to the driver's features to enable UDP/TCP checksum over IPv6. No extra configuration of the engine is needed on top of the IPv4 counterpart, which already is in the features list (NETIF_F_IP_CSUM). Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan Markman authored
This patch sets the Tx FIFO data size on port 0 to 10kB. This prepares the PPv2 driver for the Jumbo frame support addition as the hardware will need big enough Tx FIFO buffers when dealing with frames going through an interface with an MTU of 9000. Signed-off-by: Yan Markman <ymarkman@marvell.com> [Antoine: commit message, small reworks.] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
The buffer free routine is updated to release only given a number of buffers, and the destroy routine now checks the actual number of buffers in the (BPPI and BPPE) HW counters before draining the pools. This change helps getting jumbo frames support. Signed-off-by: Stefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Chulski authored
This patch configures the buffer manager long pool for all ports part of the same CP. Long pool separation between ports is redundant since there are no performance improvement when different pools are used. Signed-off-by: Stefan Chulski <stefanc@marvell.com> [Antoine: cosmetic cleanup, commit message] Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
This fixes the following kernel-doc warning: ./include/net/dst.h:366: warning: Function parameter or member 'net' not described in 'skb_tunnel_rx' Fixes: ea23192e ("tunnels: harmonize cleanup done on skb on rx path") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
The other dst_cache_{get,set}_ip{4,6} functions, and the doc comment for dst_cache_set_ip6 use 'saddr' for their source address parameter. Rename the parameter to increase consistency. This fixes the following kernel-doc warnings: ./include/net/dst_cache.h:58: warning: Function parameter or member 'addr' not described in 'dst_cache_set_ip6' ./include/net/dst_cache.h:58: warning: Excess function parameter 'saddr' description in 'dst_cache_set_ip6' Fixes: 911362c7 ("net: add dst_cache support") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Kirill Tkhai says: ==================== Converting pernet_operations (part #4) this series continues to review and to convert pernet_operations to make them possible to be executed in parallel for several net namespaces in the same time. The patches touch mostly netfilter, also there are small number of changes in other places. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations register and unregister sysctl. nf_conntrack_l4proto_gre4->init_net is simple memory initializer. Also, exit method removes gre keymap_list, which is per-net. This looks safe to be executed in parallel with other pernet_operations. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations register and unregister two conntrack notifiers, and they seem to be safe to be executed in parallel. General/not related to async pernet_operations JFI: ctnetlink_net_exit_batch() actions are grouped in batch, and this could look like there is synchronize_rcu() is forgotten. But there is synchronize_rcu() on module exit patch (in ctnetlink_exit()), so this batch may be reworked as simple .exit method. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations register and unregister sysctl and /proc entries. Exit batch method also waits till all per-net conntracks are dead. Thus, they are safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations initialize and destroy net_generic(net, ip_set_net_id)-related data. Since ip_set is under CONFIG_IP_SET, it's easy to watch drivers, which depend on this config. All of them are in net/netfilter/ipset directory, except of net/netfilter/xt_set.c. There are no more drivers, which use ip_set, and all of the above don't register another pernet_operations. Also, there are is no indirect users, as header file include/linux/netfilter/ipset/ip_set.h does not define indirect users by something like this: #ifdef CONFIG_IP_SET extern func(void); #else static inline func(void); #endif So, there are no more pernet operations, dereferencing net_generic(net, ip_set_net_id). ip_set_net_ops are OK to be executed in parallel for several net, so we mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations initialize and destroy pernet net_generic(net, fou_net_id) list. The rest of net_generic(net, fou_net_id) accesses may happen after netlink message, and in-tree pernet_operations do not send FOU_GENL_NAME messages. So, these pernet_operations are safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations looks similar to dccp_v4_ops, and they are also safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations create and destroy net::dccp::v4_ctl_sk. It looks like another pernet_operations don't want to send dccp packets to dying or creating net. Batch method similar to ipv4/ipv6 sockets and it has to be safe to be executed in parallel with anything else. So, we mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations have a deal with cgw_list, and the rest of accesses are made under rtnl_lock(). The only exception is cgw_dump_jobs(), which is accessed under rcu_read_lock(). cgw_dump_jobs() is called on netlink request, and it does not seem, foreign pernet_operations want to send a net such the messages. So, we mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
Init method just allocates memory for new cfg, and assigns net_generic(net, caif_net_id). Despite there is synchronize_rcu() on error path in cfcnfg_create(), in real this function does not use global lists, so it looks like this synchronize_rcu() is some legacy inheritance. Exit method removes caif devices under rtnl_lock(). There could be a problem, if someone from foreign net pernet_operations dereference caif_net_id of this net. It's dereferenced in get_cfcnfg() and caif_device_list(). get_cfcnfg() is used from netdevice notifiers, where they are called under rtnl_lock(). The notifiers can't be called from foreign nets pernet_operations. Also, it's used from caif_disconnect_client() and from caif_connect_client(). The both of the functions work with caif socket, and there is the only possibility to have a socket, when the net is dead. This may happen only of the socket was created as kern using sk_alloc(). Grep by PF_CAIF shows we do not create kern caif sockets, so get_cfcnfg() is safe. caif_device_list() is used in netdevice notifiers and exit method under rtnl lock. Also, from caif_get() used in the netdev notifiers and in caif_flow_cb(). The last item is skb destructor. Since there are no kernel caif sockets nobody can send net a packet in parallel with init/exit, so this is also safe. So, these pernet_operations are safe to be async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations call xt_proto_init() and xt_proto_fini(), which just register and unregister /proc entries. They are safe to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations use nf_log_set() and nf_log_unset() in their methods: nf_log_bridge_net_ops nf_log_arp_net_ops nf_log_ipv4_net_ops nf_log_ipv6_net_ops nf_log_netdev_net_ops Nobody can send such a packet to a net before it's became registered, nobody can send a packet after all netdevices are unregistered. So, these pernet_operations are able to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
These pernet_operations use ebt_register_table() and ebt_unregister_table() to act on the tables, which are used as argument in ebt_do_table(), called from ebtables hooks. Since there are no net-related bridge packets in-flight, when the init and exit methods are called, these pernet_operations are safe to be executed in parallel with any other. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
For tests using veth interfaces, the test infrastructure can create the netdevs if they do not exist. Arguably this is a preferred approach since the tests require p$N and p$(N+1) to be pairs. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Samuel Mendoza-Jonas authored
Add a generic netlink family for NCSI. This supports three commands; NCSI_CMD_PKG_INFO which returns information on packages and their associated channels, NCSI_CMD_SET_INTERFACE which allows a specific package or package/channel combination to be set as the preferred choice, and NCSI_CMD_CLEAR_INTERFACE which clears any preferred setting. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Priyaranjan Jha authored
This patch adds TCP_NLA_CA_STATE stat into SCM_TIMESTAMPING_OPT_STATS. It reports ca_state of socket, when timestamp is generated. Signed-off-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Priyaranjan Jha authored
This patch adds TCP_NLA_SENDQ_SIZE stat into SCM_TIMESTAMPING_OPT_STATS. It reports no. of bytes present in send queue, when timestamp is generated. Signed-off-by: Priyaranjan Jha <priyarjha@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Currently the tc action test is used only to test mirred redirect action. This patch extends it for mirred mirror. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
LRO and RX-FCS offloads cannot be enabled at the same time since it is not clear what should happen to the FCS of each coalesced packet. The FCS is not really part of the TCP payload, hence cannot be merged into one big packet. On the other hand, providing one big LRO packet with one FCS contradicts the RX-FCS feature goal. Use the fix features mechanism in order to prevent intersection of the features and drop LRO in case RX-FCS is requested. Enabling RX-FCS while LRO is enabled will result in: $ ethtool -K ens6 rx-fcs on Actual changes: large-receive-offload: off [requested on] rx-fcs: on Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
Corrected stats mismatch between Host Tx and its peer Rx stats Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roman Mashak authored
Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Mar, 2018 9 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - bump copyright years, by Sven Eckelmann - fix macro indendation for checkpatch, by Sven Eckelmann - fix comparison operator for bool returning functions, by Sven Eckelmann - assume 2-byte packet alignments for all packet types, by Matthias Schiffer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently we allow the creation of 8021q devices on top of ipvlan, but such devices are nonfunctional, as the underlying ipvlan rx_hanlder hook can't match the relevant traffic. Be explicit and forbid the creation of such nonfunctional devices. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Wang authored
XDP_REDIRECT support for mergeable buffer was removed since commit 7324f539 ("virtio_net: disable XDP_REDIRECT in receive_mergeable() case"). This is because we don't reserve enough tailroom for struct skb_shared_info which breaks XDP assumption. So this patch fixes this by reserving enough tailroom and using fixed size of rx buffer. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prashant Bhole authored
This patch removes testns after test failure so that next test can continue with clean ns Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
William Tu says: ==================== gre: add sequence number for collect md mode. Currently GRE sequence number can only be used in native tunnel mode. The first patch adds sequence number support for gre collect metadata mode, and the second patch tests it using BPF. RFC2890 defines GRE sequence number to be specific to the traffic flow identified by the key. However, this patch does not implement per-key seqno. The sequence number is shared in the same tunnel device. That is, different tunnel keys using the same collect_md tunnel share single sequence number. A new BFP uapi tunnel flag 'BPF_F_SEQ_NUMBER' is added. -- v1->v2: rename BPF_F_GRE_SEQ to BPF_F_SEQ_NUMBER suggested by Daniel ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Tu authored
The patch adds tests for GRE sequence number support for metadata mode tunnel. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Tu authored
Currently GRE sequence number can only be used in native tunnel mode. This patch adds sequence number support for gre collect metadata mode. RFC2890 defines GRE sequence number to be specific to the traffic flow identified by the key. However, this patch does not implement per-key seqno. The sequence number is shared in the same tunnel device. That is, different tunnel keys using the same collect_md tunnel share single sequence number. Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Govindarajulu Varadarajan says: ==================== enic update This series adds support for IPv6 vxlan offload and UDP rss along with a bug fix in filling the rq ring. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Govindarajulu Varadarajan authored
New adapter needs CMD_OPENF_IG_DESCCACHE flag to be set. If this flag is not set, fw flushes the global IG desc cache. This flag is nop in older adapter. Also increment driver version Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-