1. 12 May, 2014 10 commits
  2. 22 Apr, 2014 6 commits
    • Micky Ching's avatar
      mmc: rtsx: add R1-no-CRC mmc command type handle · 5027251e
      Micky Ching authored
      a27fbf2f ("mmc: add ignorance case for CMD13 CRC error") produced
      a cmd.flags unhandled in realtek pci host driver.  This will make MMC
      card fail to initialize, this patch is used to handle the new cmd.flags
      condition and MMC card can be used.
      Signed-off-by: default avatarMicky Ching <micky_ching@realsil.com.cn>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      5027251e
    • Ulf Hansson's avatar
      mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus · 573185cc
      Ulf Hansson authored
      The sdio func device is added to the driver model after the card
      device.
      
      This means the sdio func device will be suspend before the card device
      and thus resumed after. The consequence are the mmc core don't
      explicity need to protect itself from receiving sdio requests in
      suspended state. Instead that can be handled from the sdio bus, which
      is thus invokes the PM callbacks instead of old dummy function.
      
      In the case were the sdio func driver don't implement the PM callbacks
      the mmc core will in the early phase of system suspend, remove the
      card from the driver model and thus power off it.
      
      Cc: Aaron Lu <aaron.lu@intel.com>
      Cc: NeilBrown <neilb@suse.de>
      Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Reviewed-by: default avatarAaron Lu <aaron.lu@intel.com>
      Tested-by: default avatarxiaoming wang <xiaoming.wang@intel.com>
      Tested-by: default avatarChuanxiao Dong <chuanxiao.dong@intel.com>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      573185cc
    • Stefan Wahren's avatar
      mmc: core: Use maximum timeout values in case TACC field is zero · f7bf11a3
      Stefan Wahren authored
      When plugging a specific micro SD card at MMC socket of a custom i.MX28 board,
      we get the following kernel warning:
      
      WARNING: CPU: 0 PID: 30 at drivers/mmc/host/mxs-mmc.c:342 mxs_mmc_start_cmd+0x34c/0x378()
      Modules linked in:
      CPU: 0 PID: 30 Comm: kworker/u2:1 Not tainted 3.14.0-rc5 #8
      Workqueue: kmmcd mmc_rescan
      [<c0015420>] (unwind_backtrace) from [<c0012cb0>] (show_stack+0x10/0x14)
      [<c0012cb0>] (show_stack) from [<c001daf8>] (warn_slowpath_common+0x6c/0x8c)
      [<c001daf8>] (warn_slowpath_common) from [<c001db34>] (warn_slowpath_null+0x1c/0x24)
      [<c001db34>] (warn_slowpath_null) from [<c0349478>] (mxs_mmc_start_cmd+0x34c/0x378)
      [<c0349478>] (mxs_mmc_start_cmd) from [<c0338fa0>] (mmc_start_request+0xc4/0xf4)
      [<c0338fa0>] (mmc_start_request) from [<c03390b4>] (mmc_wait_for_req+0x50/0x164)
      [<c03390b4>] (mmc_wait_for_req) from [<c03405b8>] (mmc_app_send_scr+0x158/0x1c8)
      [<c03405b8>] (mmc_app_send_scr) from [<c033ee1c>] (mmc_sd_setup_card+0x80/0x3c8)
      [<c033ee1c>] (mmc_sd_setup_card) from [<c033f788>] (mmc_sd_init_card+0x124/0x66c)
      [<c033f788>] (mmc_sd_init_card) from [<c033fd7c>] (mmc_attach_sd+0xac/0x174)
      [<c033fd7c>] (mmc_attach_sd) from [<c033a658>] (mmc_rescan+0x25c/0x2d8)
      [<c033a658>] (mmc_rescan) from [<c003597c>] (process_one_work+0x1b4/0x4ec)
      [<c003597c>] (process_one_work) from [<c0035de4>] (worker_thread+0x130/0x464)
      [<c0035de4>] (worker_thread) from [<c003c824>] (kthread+0xb4/0xd0)
      [<c003c824>] (kthread) from [<c000f420>] (ret_from_fork+0x14/0x34)
      
      The error is due to an invalid value in CSD register of a specific 2GB
      micro SD card. The CSD version of this card is 1.0 but the TACC field
      has the invalid value 0.
      
      cid:0000005553442020000000000000583f
      csd:00000032535a83bfedb7ffbf1680003f
      date:08/2005
      erase_size:512
      fwrev:0x0
      hwrev:0x0
      manfid:0x000000
      name:USD
      oemid:0x0000
      preferred_erase_size:4194304
      scr:0225000000000000
      serial:0x00000000
      type:SD
      
      Since the kernel is making use of this TACC field to calculate the SD
      card timeout, an invalid value 0 leads to a warning at
      mxs_ns_to_ssp_ticks() and later the following misleading error message
      appears in a loop:
      
      mxs-mmc 80010000.ssp: card claims to support voltages below defined range
      mxs-mmc 80010000.ssp: no support for card's volts
      mmc0: error -22 whilst initialising MMC card
      
      This error is only found on this 2GB SD card on mxs platform.
      On x86 this card works without any problems.
      
      The following patch based on the work of Peter Chan and Otavio Salvador.
      It catches the case that the determined timeout is still 0 and sets it
      to a valid value.
      
      Successful tested on a i.MX28 board.
      Signed-off-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      f7bf11a3
    • Axel Lin's avatar
      mmc: Convert to use ATTRIBUTE_GROUPS · d1e58212
      Axel Lin authored
      Use new ATTRIBUTE_GROUPS macro to declare attribute groups.
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      d1e58212
    • Fabio Estevam's avatar
      mmc: card.h: Use NULL instead of 0 for END_FIXUP · 297d4056
      Fabio Estevam authored
      Fix the following sparse warnings:
      
      drivers/mmc/card/block.c:2421:9: warning: Using plain integer as NULL pointer
      
      drivers/mmc/core/quirks.c:69:9: warning: Using plain integer as NULL pointer
      Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      297d4056
    • Markus Mayer's avatar
      mmc: Delay the card_event callback into the mmc_rescan worker · fa372a51
      Markus Mayer authored
      This change removes the callback from atomic context which it doesn't
      need to be in, and puts it in line with the debounced rescan.
      
      This code is based on these e-mail threads with Christian Daudt:
      
        https://lkml.org/lkml/2013/8/19/539
        https://lkml.org/lkml/2014/3/19/79Signed-off-by: default avatarMarkus Mayer <markus.mayer@linaro.org>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarChris Ball <chris@printf.net>
      fa372a51
  3. 20 Apr, 2014 12 commits
  4. 19 Apr, 2014 12 commits
    • Adrien BAK's avatar
      perf tools: Improve error reporting · ffa91880
      Adrien BAK authored
      In the current version, when using perf record, if something goes
      wrong in tools/perf/builtin-record.c:375
        session = perf_session__new(file, false, NULL);
      
      The error message:
      "Not enough memory for reading per file header"
      
      is issued. This error message seems to be outdated and is not very
      helpful. This patch proposes to replace this error message by
      "Perf session creation failed"
      
      I believe this issue has been brought to lkml:
      https://lkml.org/lkml/2014/2/24/458
      although this patch only tackles a (small) part of the issue.
      
      Additionnaly, this patch improves error reporting in
      tools/perf/util/data.c open_file_write.
      
      Currently, if the call to open fails, the user is unaware of it.
      This patch logs the error, before returning the error code to
      the caller.
      Reported-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAdrien BAK <adrien.bak@metascale.org>
      Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast
      [ Reorganize the changelog into paragraphs ]
      [ Added empty line after fd declaration in open_file_write ]
      Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      ffa91880
    • Vladimir Nikulichev's avatar
      perf tools: Adjust symbols in VDSO · 922d0e4d
      Vladimir Nikulichev authored
      pert-report doesn't resolve function names in VDSO:
      
      $ perf report --stdio -g flat,0.0,15,callee --sort pid
      ...
                  8.76%
                     0x7fff6b1fe861
                     __gettimeofday
                     ACE_OS::gettimeofday()
      ...
      
      In this case symbol values should be adjusted the same way as for executables,
      relocatable objects and prelinked libraries.
      
      After fix:
      
      $ perf report --stdio -g flat,0.0,15,callee --sort pid
      ...
                  8.76%
                     __vdso_gettimeofday
                     __gettimeofday
                     ACE_OS::gettimeofday()
      Signed-off-by: default avatarVladimir Nikulichev <nvs@tbricks.com>
      Tested-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Reviewed-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      922d0e4d
    • Alexander Yarygin's avatar
      perf kvm: Fix 'Min time' counting in report command · acb61fc8
      Alexander Yarygin authored
      Every event in the perf-kvm has a 'stats' structure, which contains
      max/min/average/etc times of handling this event.
      The problem is that the 'perf-kvm stat report' command always shows
      that 'min time' is 0us for every event. Example:
      
       # perf kvm stat report
      
       Analyze events for all VCPUs:
      
          VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
        [..]
        0xB2 MSCH         12     0.07%     0.00%        0us        8us 7.31us ( +-   2.11% )
        0xB2 CHSC         12     0.07%     0.00%        0us       18us 9.39us ( +-   9.49% )
        0xB2 STPX          8     0.05%     0.00%        0us        2us 1.88us ( +-   7.18% )
        0xB2 STSI          7     0.04%     0.00%        0us       44us 16.49us ( +-  38.20% )
        [..]
      
      This happens because the 'stats' structure is not initialized and
      stats->min equals to 0. Lets initialize the structure for every
      event after its allocation using init_stats() function. This initializes
      stats->min to -1 and makes 'Min time' statistics counting work:
      
       # perf kvm stat report
      
       Analyze events for all VCPUs:
      
          VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time Avg time
        [..]
        0xB2 MSCH         12     0.07%     0.00%        6us        8us 7.31us ( +-   2.11% )
        0xB2 CHSC         12     0.07%     0.00%        7us       18us 9.39us ( +-   9.49% )
        0xB2 STPX          8     0.05%     0.00%        1us        2us 1.88us ( +-   7.18% )
        0xB2 STSI          7     0.04%     0.00%        1us       44us 16.49us ( +-  38.20% )
        [..]
      Signed-off-by: default avatarAlexander Yarygin <yarygin@linux.vnet.ibm.com>
      Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
      Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com
      [ Fixing the perf examples changelog output ]
      Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
      acb61fc8
    • Eric Dumazet's avatar
      coredump: fix va_list corruption · 404ca80e
      Eric Dumazet authored
      A va_list needs to be copied in case it needs to be used twice.
      
      Thanks to Hugh for debugging this issue, leading to various panics.
      
      Tested:
      
        lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
      
      'produce_core' is simply : main() { *(int *)0 = 1;}
      
        lpq84:~# ./produce_core
        Segmentation fault (core dumped)
        lpq84:~# dmesg | tail -1
        [  614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed
      
      Notice the last argument was replaced by a NULL (we were lucky enough to
      not crash, but do not try this on your production machine !)
      
      After fix :
      
        lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
        lpq83:~# ./produce_core
        Segmentation fault
        lpq83:~# dmesg | tail -1
        [  740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed
      
      Fixes: 5fe9d8ca ("coredump: cn_vprintf() has no reason to call vsnprintf() twice")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Diagnosed-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: stable@vger.kernel.org # 3.11+
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      404ca80e
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 6d459690
      Linus Torvalds authored
      Pull x86 fix from Ingo Molnar:
       "This fixes the preemption-count imbalance crash reported by Owen
        Kibel"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/mce: Fix CMCI preemption bugs
      6d459690
    • Linus Torvalds's avatar
      Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 8f98f6f5
      Linus Torvalds authored
      Pull scheduler fixes from Ingo Molnar:
       "Two fixes:
      
         - a SCHED_DEADLINE task selection fix
         - a sched/numa related lockdep splat fix"
      
      * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        sched: Check for stop task appearance when balancing happens
        sched/numa: Fix task_numa_free() lockdep splat
      8f98f6f5
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 8de3f7a7
      Linus Torvalds authored
      Pull perf fixes from Ingo Molnar:
       "Two kernel side fixes:
      
         - an Intel uncore PMU driver potential crash fix
         - a kprobes/perf-call-graph interaction fix"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU
        kprobes/x86: Fix page-fault handling logic
      8de3f7a7
    • Linus Torvalds's avatar
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · b9312420
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "Unfortunately this contains no easter eggs, its a bit larger than I'd
        like, but I included a patch that just moves code from one file to
        another and I'd like to avoid merge conflicts with that later, so it
        makes it seem worse than it is,
      
        Otherwise:
         - radeon: fixes to use new microcode to stabilise some cards, use
           some common displayport code, some runtime pm fixes, pll regression
           fixes
         - i915: fix for some context oopses, a warn in a used path, backlight
           fixes
         - nouveau: regression fix
         - omap: a bunch of fixes"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (51 commits)
        drm: bochs: drop unused struct fields
        drm: bochs: add power management support
        drm: cirrus: add power management support
        drm: Split out drm_probe_helper.c from drm_crtc_helper.c
        drm/plane-helper: Don't fake-implement primary plane disabling
        drm/ast: fix value check in cbr_scan2
        drm/nouveau/bios: fix a bit shift error introduced by 457e77b2
        drm/radeon/ci: make sure mc ucode is loaded before checking the size
        drm/radeon/si: make sure mc ucode is loaded before checking the size
        drm/radeon: improve PLL params if we don't match exactly v2
        drm/radeon: memory leak on bo reservation failure. v2
        drm/radeon: fix VCE fence command
        drm/radeon: re-enable mclk dpm on R7 260X asics
        drm/radeon: add support for newer mc ucode on CI (v2)
        drm/radeon: add support for newer mc ucode on SI (v2)
        drm/radeon: apply more strict limits for PLL params v2
        drm/radeon: update CI DPM powertune settings
        drm/radeon: fix runpm handling on APUs (v4)
        drm/radeon: disable mclk dpm on R7 260X
        drm/tegra: Remove gratuitous pad field
        ...
      b9312420
    • Dave Airlie's avatar
      Merge branch 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux into drm-next · a42892ed
      Dave Airlie authored
      Some i2c fixes over DisplayPort.
      
      * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux:
        drm/radeon: Improve vramlimit module param documentation
        drm/radeon: fix audio pin counts for DCE6+ (v2)
        drm/radeon/dp: switch to the common i2c over aux code
        drm/dp/i2c: Update comments about common i2c over dp assumptions (v3)
        drm/dp/i2c: send bare addresses to properly reset i2c connections (v4)
        drm/radeon/dp: handle zero sized i2c over aux transactions (v2)
        drm/i915: support address only i2c-over-aux transactions
        drm/tegra: dp: Support address-only I2C-over-AUX transactions
      a42892ed
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · ebfc45ee
      Linus Torvalds authored
      Pull more networking fixes from David Miller:
      
       1) Fix mlx4_en_netpoll implementation, it needs to schedule a NAPI
          context, not synchronize it.  From Chris Mason.
      
       2) Ipv4 flow input interface should never be zero, it should be
          LOOPBACK_IFINDEX instead.  From Cong Wang and Julian Anastasov.
      
       3) Properly configure MAC to PHY connection in mvneta devices, from
          Thomas Petazzoni.
      
       4) sys_recv should use SYSCALL_DEFINE.  From Jan Glauber.
      
       5) Tunnel driver ioctls do not use the correct namespace, fix from
          Nicolas Dichtel.
      
       6) Fix memory leak on seccomp filter attach, from Kees Cook.
      
       7) Fix lockdep warning for nested vlans, from Ding Tianhong.
      
       8) Crashes can happen in SCTP due to how the auth_enable value is
          managed, fix from Vlad Yasevich.
      
       9) Wireless fixes from John W Linville and co.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
        net: sctp: cache auth_enable per endpoint
        tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled
        vlan: Fix lockdep warning when vlan dev handle notification
        seccomp: fix memory leak on filter attach
        isdn: icn: buffer overflow in icn_command()
        ip6_tunnel: use the right netns in ioctl handler
        sit: use the right netns in ioctl handler
        ip_tunnel: use the right netns in ioctl handler
        net: use SYSCALL_DEFINEx for sys_recv
        net: mdio-gpio: Add support for separate MDI and MDO gpio pins
        net: mdio-gpio: Add support for active low gpio pins
        net: mdio-gpio: Use devm_ functions where possible
        ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source()
        ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif
        mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll
        net: mvneta: properly configure the MAC <-> PHY connection in all situations
        net: phy: add minimal support for QSGMII PHY
        sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)
        mwifiex: fix hung task on command timeout
        mwifiex: process event before command response
        ...
      ebfc45ee
    • Linus Torvalds's avatar
      Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 · 6e66d5da
      Linus Torvalds authored
      Pull cifs fixes from Steve French:
       "A set of 5 small cifs fixes"
      
      * 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
        cif: fix dead code
        cifs: fix error handling cifs_user_readv
        fs: cifs: remove unused variable.
        Return correct error on query of xattr on file with empty xattrs
        cifs: Wait for writebacks to complete before attempting write.
      6e66d5da
    • Linus Torvalds's avatar
      Merge tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc · 25bfe4f5
      Linus Torvalds authored
      Pull char/misc driver fixes from Greg KH:
       "Here are a few driver fixes for char/misc drivers that resolve
        reported issues.
      
        All have been in linux-next successfully for a few days"
      
      * tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
        Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts
        Tools: hv: Handle the case when the target file exists correctly
        vme_tsi148: Utilize to_pci_dev() macro
        vme_tsi148: Fix PCI address mapping assumption
        vme_tsi148: Fix typo in tsi148_slave_get()
        w1: avoid recursive device_add
        w1: fix netlink refcnt leak on error path
        misc: Grammar s/addition/additional/
        drivers: mcb: fix memory leak in chameleon_parse_cells() error path
        mei: ignore client writing state during cb completion
        mei: me: do not load the driver if the FW doesn't support MEI interface
        GenWQE: Increase driver version number
        GenWQE: Fix multithreading problems
        GenWQE: Ensure rc is not returning an uninitialized value
        GenWQE: Add wmb before DDCB is started
        GenWQE: Enable access to VPD flash area
      25bfe4f5