We don't have an nvme status to report if the driver's .queue_rq()
returns an error without dispatching the requested nvme command. Check
the return value from blk_execute_rq() for all passthrough commands so
the caller may know their command was not successful.

If the command is from the target passthrough interface and fails to
dispatch, synthesize the response back to the host as a internal target
error.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-5-kbusch@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

The synchronous blk_execute_rq() had not provided a way for its callers
to know if its request was successful or not. Return the blk_status_t
result of the request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-4-kbusch@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

The generic blk_execute_rq() knows how to handle polled completions. Use
that instead of implementing an nvme specific handler.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-3-kbusch@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Poll for completions if the request's hctx is a polling type.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210610214437.641245-2-kbusch@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

All driver uses are gone now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20210624081012.256464-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use idr_for_each_entry to simplify removing all devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-10-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

loop_lookup has two callers - one wants to do the a find by index and the
other wants any unbound loop device.  Open code the respective
functionality in each caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210623145908.92973-9-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Passing a negative index to loop_lookup while return any unbound device.
Doing that for a delete does not make much sense, so add check to
explicitly reject that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210623145908.92973-8-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Move acquiring and releasing loop_ctl_mutex from the callers into
loop_add.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-7-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Split loop_control_ioctl into a helper for each command.  This keeps the
code nicely separated for the upcoming locking changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

loop_add returns the right error if the slot wasn't available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210623145908.92973-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

None of the callers cares about the allocated struct loop_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

loop_ctl_mutex is only needed to iterate the IDR for removing the loop
devices, so reduce the coverage.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Unregister the misc and blockdevice first to prevent further access,
and only then iterate to remove the devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Link: https://lore.kernel.org/r/20210623145908.92973-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fix a let hunk from the blk_mq_alloc_disk conversion.

Fixes: 281ea6a5bfdc ("mmc: switch to blk_mq_alloc_disk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210621080144.3655131-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use the blk_mq_alloc_disk to allocate the request_queue and gendisk
together.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210616053934.880951-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The gendisk already acquires a reference to the queue when add_disk
is called, which dropped on put_disk.  So remove the superflous
extra refcounting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210616053934.880951-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Problem:
On reconfigure of device, there is no way to defend if the backend
storage is matching with the initial backend storage.

Say, if an initial connect request for backend "pool1/image1" got
mapped to /dev/nbd0 and the userspace process is terminated. A next
reconfigure request within NBD_ATTR_DEAD_CONN_TIMEOUT is allowed to
use /dev/nbd0 for a different backend "pool1/image2"

For example, an operation like below could be dangerous:

$ sudo rbd-nbd map --try-netlink rbd-pool/ext4-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="bfc444b4-64b1-418f-8b36-6e0d170cfc04" TYPE="ext4"
$ sudo pkill -9 rbd-nbd
$ sudo rbd-nbd attach --try-netlink --device /dev/nbd0 rbd-pool/xfs-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="d29bf343-6570-4069-a9ea-2fa156ced908" TYPE="xfs"

Solution:
Provide a way for userspace processes to keep some metadata to identify
between the device and the backend, so that when a reconfigure request is
made, we can compare and avoid such dangerous operations.

With this solution, as part of the initial connect request, backend
path can be stored in the sysfs per device config, so that on a reconfigure
request it's easy to check if the backend path matches with the initial
connect backend path.

Please note, ioctl interface to nbd will not have these changes, as there
won't be any reconfigure.
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210429102828.31248-1-prasanna.kalever@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210614060759.3965724-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

With the legacy IDE driver long deprecated, and modern userspace being
much more flexible about dev_t assignments there is no reason to fake
a registration as the legacy IDE driver in ubd.  This registeration
is a little problematic as it registers the same request_queue for
multiple gendisks, so just remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20210614060759.3965724-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Fix up the recent blk_alloc_disk conversion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210614060231.3965278-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210614060343.3965416-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the driver specific attributes directly to device_add_disk instead
of manually creating them after the disk registration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210614060343.3965416-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull block driver updates from Jens Axboe:
 "Pretty calm round, mostly just NVMe and a bit of MD:

   - NVMe updates (via Christoph)
        - improve the APST configuration algorithm (Alexey Bogoslavsky)
        - look for StorageD3Enable on companion ACPI device
          (Mario Limonciello)
        - allow selecting the network interface for TCP connections
          (Martin Belanger)
        - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
          Christoph)
        - move the ACPI StorageD3 code to drivers/acpi/ and add quirks
          for certain AMD CPUs (Mario Limonciello)
        - zoned device support for nvmet (Chaitanya Kulkarni)
        - fix the rules for changing the serial number in nvmet
          (Noam Gottlieb)
        - various small fixes and cleanups (Dan Carpenter, JK Kim,
          Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
          Uytterhoeven, Daniel Wagner)

   - MD updates (Via Song)
        - iostats rewrite (Guoqing Jiang)
        - raid5 lock contention optimization (Gal Ofri)

   - Fall through warning fix (Gustavo)

   - Misc fixes (Gustavo, Jiapeng)"

* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
  nvmet: use NVMET_MAX_NAMESPACES to set nn value
  loop: Fix missing discard support when using LOOP_CONFIGURE
  nvme.h: add missing nvme_lba_range_type endianness annotations
  nvme: remove zeroout memset call for struct
  nvme-pci: remove zeroout memset call for struct
  nvmet: remove zeroout memset call for struct
  nvmet: add ZBD over ZNS backend support
  nvmet: add Command Set Identifier support
  nvmet: add nvmet_req_bio put helper for backends
  nvmet: add req cns error complete helper
  block: export blk_next_bio()
  nvmet: remove local variable
  nvmet: use nvme status value directly
  nvmet: use u32 type for the local variable nsid
  nvmet: use u32 for nvmet_subsys max_nsid
  nvmet: use req->cmd directly in file-ns fast path
  nvmet: use req->cmd directly in bdev-ns fast path
  nvmet: make ver stable once connection established
  nvmet: allow mn change if subsys not discovered
  nvmet: make sn stable once connection was established
  ...

Pull core block updates from Jens Axboe:

 - disk events cleanup (Christoph)

 - gendisk and request queue allocation simplifications (Christoph)

 - bdev_disk_changed cleanups (Christoph)

 - IO priority improvements (Bart)

 - Chained bio completion trace fix (Edward)

 - blk-wbt fixes (Jan)

 - blk-wbt enable/disable fix (Zhang)

 - Scheduler dispatch improvements (Jan, Ming)

 - Shared tagset scheduler improvements (John)

 - BFQ updates (Paolo, Luca, Pietro)

 - BFQ lock inversion fix (Jan)

 - Documentation improvements (Kir)

 - CLONE_IO block cgroup fix (Tejun)

 - Remove of ancient and deprecated block dump feature (zhangyi)

 - Discard merge fix (Ming)

 - Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
   Yang)

* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
  block: fix discard request merge
  block/mq-deadline: Remove a WARN_ON_ONCE() call
  blk-mq: update hctx->dispatch_busy in case of real scheduler
  blk: Fix lock inversion between ioc lock and bfqd lock
  bfq: Remove merged request already in bfq_requests_merged()
  block: pass a gendisk to bdev_disk_changed
  block: move bdev_disk_changed
  block: add the events* attributes to disk_attrs
  block: move the disk events code to a separate file
  block: fix trace completion for chained bio
  block/partitions/msdos: Fix typo inidicator -> indicator
  block, bfq: reset waker pointer with shared queues
  block, bfq: check waker only for queues with no in-flight I/O
  block, bfq: avoid delayed merge of async queues
  block, bfq: boost throughput by extending queue-merging times
  block, bfq: consider also creation time in delayed stable merge
  block, bfq: fix delayed stable merge check
  block, bfq: let also stably merged queues enjoy weight raising
  blk-wbt: make sure throttle is enabled properly
  blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
  ...

Pull HID updates from Jiri Kosina:

 - patch series that ensures that hid-multitouch driver disables touch
   and button-press reporting on hid-mt devices during suspend when the
   device is not configured as a wakeup-source, from Hans de Goede

 - support for ISH DMA on Intel EHL platform, from Even Xu

 - support for Renoir and Cezanne SoCs, Ambient Light Sensor and Human
   Presence Detection sensor for amd-sfh driver, from Basavaraj Natikar

 - other assorted code cleanups and device-specific fixes/quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (45 commits)
  HID: thrustmaster: Switch to kmemdup() when allocate change_request
  HID: multitouch: Disable event reporting on suspend when the device is not a wakeup-source
  HID: logitech-dj: Implement may_wakeup ll-driver callback
  HID: usbhid: Implement may_wakeup ll-driver callback
  HID: core: Add hid_hw_may_wakeup() function
  HID: input: Add support for Programmable Buttons
  HID: wacom: Correct base usage for capacitive ExpressKey status bits
  HID: amd_sfh: Add initial support for HPD sensor
  HID: amd_sfh: Extend ALS support for newer AMD platform
  HID: amd_sfh: Extend driver capabilities for multi-generation support
  HID: surface-hid: Fix get-report request
  HID: sony: fix freeze when inserting ghlive ps3/wii dongles
  HID: usbkbd: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  HID: amd_sfh: change in maintainer
  HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
  HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
  HID: intel-ish-hid: Set ISH driver depends on x86
  HID: hid-input: add Surface Go battery quirk
  HID: intel-ish-hid: Fix minor typos in comments
  HID: usbmouse: Avoid GFP_ATOMIC when GFP_KERNEL is possible
  ...

Pull EDAC updates from Tony Luck:
 "Various fixes and support for new CPUs:

   - Clean up error messages from thunderx_edac

   - Add MODULE_DEVICE_TABLE to ti_edac so it will autoload

   - Use %pR to print resources in aspeed_edac

   - Add Yazen Ghannam as MAINTAINER for AMD edac drivers

   - Fix Ice Lake and Sapphire Rapids drivers to report correct "near"
     or "far" device for errors in 2LM configurations

   - Add support of on package high bandwidth memory in Sapphire Rapids

   - New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
     ICL-NNPI, Tiger Lake and Alder Lake)

   - Don't even try to load Intel EDAC drivers when running as a guest

   - Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6"

* tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: fix core dependency
  EDAC/Intel: Do not load EDAC driver when running as a guest
  EDAC/igen6: Add Intel Alder Lake SoC support
  EDAC/igen6: Add Intel Tiger Lake SoC support
  EDAC/igen6: Add Intel ICL-NNPI SoC support
  EDAC/i10nm: Add support for high bandwidth memory
  EDAC/i10nm: Add detection of memory levels for ICX/SPR servers
  EDAC/skx_common: Add new ADXL components for 2-level memory
  MAINTAINERS: Make Yazen Ghannam maintainer for EDAC-AMD64
  EDAC/aspeed: Use proper format string for printing resource
  EDAC/ti: Add missing MODULE_DEVICE_TABLE
  EDAC/thunderx: Remove irrelevant variable from error messages

Merge tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm driver updates from Jarkko Sakkinen:
 "Bug fixes for TPM"

[ This isn't actually the whole contents of the tag and thus doesn't
  contain Jarkko's signature - I dropped the two top commits that added
  support for signing modules using elliptic curve keys because there's
  a new series for that that fixes a few confising things   - Linus ]

* tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
  tpm_tis: Use DEFINE_RES_MEM() to simplify code
  tpm: fix some doc warnings in tpm1-cmd.c
  tpm_tis_spi: add missing SPI device ID entries
  tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATURE
  char: tpm: move to use request_irq by IRQF_NO_AUTOEN flag
  tpm_tis_spi: set default probe function if device id not match
  tpm_crb: Use IOMEM_ERR_PTR when function returns iomem

Merge tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - New think-lmi driver adding support for changing Lenovo Thinkpad
     BIOS settings from within Linux using the standard firmware-
     attributes class sysfs API

   - MS Surface aggregator-cdev now also supports forwarding events to
     user-space (for debugging / new driver development purposes only)

   - New intel_skl_int3472 driver this provides the necessary glue to
     translate ACPI table information to GPIOs, regulators, etc. for
     camera sensors on Intel devices with IPU3 attached MIPI cameras

   - A whole bunch of other fixes + device-specific quirk additions

   - New devm_work_autocancel() devm-helpers.h function"

* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
  platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
  platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
  platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
  platform/x86: think-lmi: Split current_value to reflect only the value
  platform/x86: think-lmi: Fix issues with duplicate attributes
  platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
  platform/x86: intel_cht_int33fe: Move to its own subfolder
  platform/x86: intel_skl_int3472: Move to intel/ subfolder
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
  platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
  platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
  platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
  platform/x86: intel_skl_int3472: Free ACPI device resources after use
  platform/x86: Remove "default n" entries
  platform/x86: ISST: Use numa node id for cpu pci dev mapping
  platform/x86: ISST: Optimize CPU to PCI device mapping
  tools/power/x86/intel-speed-select: v1.10 release
  tools/power/x86/intel-speed-select: Fix uncore memory frequency display
  extcon: extcon-max8997: Simplify driver using devm
  extcon: extcon-max8997: Fix IRQ freeing at error path
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for i.MX8ULP

 - mtk: code change around callback struct

 - qcom: add sm6125, MSM8939 fix for channel exhaustion

 - microchip: add support for polarfire controller

 - misc: cosmetic changes to bcm-2835,flexrm,pdc, arm-mhu and hisilicon

* tag 'mailbox-v5.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (26 commits)
  MAINTAINERS: add entry for polarfire soc mailbox
  dt-bindings: add bindings for polarfire soc system controller
  mbox: add polarfire soc system controller mailbox
  dt-bindings: add bindings for polarfire soc mailbox
  mailbox: imx: Avoid using val uninitialized in imx_mu_isr()
  mailbox: qcom: Add MSM8939 APCS support
  mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
  dt-bindings: mailbox: qcom: Add MSM8939 APCS compatible
  mailbox: qcom-apcs: Add SM6125 compatible
  dt-bindings: mailbox: Add binding for sm6125
  mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()
  mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in flexrm_mbox_probe()
  mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()
  mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
  mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_data
  mailbox: mtk-cmdq: Use mailbox rx_callback
  mailbox: mtk-cmdq: Remove cmdq_cb_status
  mailbox: imx-mailbox: support i.MX8ULP MU
  mailbox: imx: add xSR/xCR register array
  mailbox: imx: replace the xTR/xRR array with single register
  ...

Pull IPMI driver updates from Corey Minyard:
 "Mostly a restructure of the kcs_bmc driver to make it easier to use
  with different types of devices, and just to clean things up and
  improve things.

  Also some bug fixes for the kcs_bmc driver.

  One fix to the IPMI watchdog to stop the timer when the action is
  none. Not a big deal, but it's the right thing to do"

* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
  ipmi: kcs_bmc_aspeed: Optionally apply status address
  ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
  ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
  dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
  dt-bindings: ipmi: Convert ASPEED KCS binding to schema
  ipmi: kcs_bmc: Add serio adaptor
  ipmi: kcs_bmc: Enable IBF on open
  ipmi: kcs_bmc: Allow clients to control KCS IRQ state
  ipmi: kcs_bmc: Decouple the IPMI chardev from the core
  ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
  ipmi: kcs_bmc: Split headers into device and client
  ipmi: kcs_bmc: Turn the driver data-structures inside-out
  ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
  ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
  ipmi: kcs_bmc: Make status update atomic
  ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
  ipmi/watchdog: Stop watchdog timer when the current action is 'none'

- patch series that ensures that hid-multitouch driver disables touch and
  button-press reporting on hid-mt devices during suspend when the device is
  not configured as a wakeup-source, from Hans de Goede

- support for LCD menu keys + LCD brightness control on the Logitech Z-10
  speakers (with LCD) which use the same protocol as the G15 keyboards
  from Hans de Goede

- support for ISH DMA on EHL platform from Even Xu
- various code style fixes and cleanups from Lee Jones and Uwe Kleine-König

- device tree match for Google Whiskers device from Ikjoon Jang

- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
  from Thomas Weißschuh
- various other small fixes and code style improvements

- support for Renoir and Cezanne SoCs
- support for Ambient Light Sensor
- support for Human Presence Detection sensor

all from Basavaraj Natikar

Pull dlm updates from David Teigland:
 "This is a major dlm networking enhancement that adds message
  retransmission so that the dlm can reliably continue operating when
  network connections fail and nodes reconnect.

  Previously, this would result in lost messages which could only be
  handled as a node failure"

* tag 'dlm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (26 commits)
  fs: dlm: invalid buffer access in lookup error
  fs: dlm: fix race in mhandle deletion
  fs: dlm: rename socket and app buffer defines
  fs: dlm: introduce proto values
  fs: dlm: move dlm allow conn
  fs: dlm: use alloc_ordered_workqueue
  fs: dlm: fix memory leak when fenced
  fs: dlm: fix lowcomms_start error case
  fs: dlm: Fix spelling mistake "stucked" -> "stuck"
  fs: dlm: Fix memory leak of object mh
  fs: dlm: don't allow half transmitted messages
  fs: dlm: add midcomms debugfs functionality
  fs: dlm: add reliable connection if reconnect
  fs: dlm: add union in dlm header for lockspace id
  fs: dlm: move out some hash functionality
  fs: dlm: add functionality to re-transmit a message
  fs: dlm: make buffer handling per msg
  fs: dlm: add more midcomms hooks
  fs: dlm: public header in out utility
  fs: dlm: fix connection tcp EOF handling
  ...

Pull gfs2 updates from Andreas Gruenbacher:
 "Various minor gfs2 cleanups and fixes"

* tag 'gfs2-v5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Clean up gfs2_unstuff_dinode
  gfs2: Unstuff before locking page in gfs2_page_mkwrite
  gfs2: Clean up the error handling in gfs2_page_mkwrite
  gfs2: Fix error handling in init_statfs
  gfs2: Fix underflow in gfs2_page_mkwrite
  gfs2: Use list_move_tail instead of list_del/list_add_tail
  gfs2: Fix do_gfs2_set_flags description