- 21 Aug, 2020 40 commits
-
-
Dan Carpenter authored
[ Upstream commit 4437c115 ] These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 1d2c0c56 ] The "entry" pointer is an offset from the list head and it doesn't point to a valid vmw_legacy_display_unit struct. Presumably the intent was to point to the last entry. Also the "i++" wasn't used so I have removed that as well. Fixes: d7e1958d ("drm/vmwgfx: Support older hardware.") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit ea38f06e ] Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count. Addresses-Coverity: ("Unused value") Fixes: fc69f4a6 ("Input: add new driver for Sentelic Finger Sensing Pad") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.comSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Krzysztof Sobota authored
[ Upstream commit cb36e29b ] When watchdog device is being registered, it calls misc_register that makes watchdog available for systemd to open. This is a data race scenario, because when device is open it may still have device struct not initialized - this in turn causes a crash. This patch moves device initialization before misc_register call and it solves the problem printed below. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54 kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54) [<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb105513974f ]--- ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54 refcount_t: increment on 0; use-after-free. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54) [<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb1055139750 ]--- Fixes: 72139dfa ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
Krzysztof Sobota <krzysztof.sobota@nokia.com> Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.comSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Ewan D. Milne authored
[ Upstream commit af6de8c6 ] We cannot wait on a completion object in the lpfc_nvme_targetport structure in the _destroy_targetport() code path because the NVMe/fc transport will free that structure immediately after the .targetport_delete() callback. This results in a use-after-free, and a crash if slub_debug=FZPU is enabled. An earlier fix put put the completion on the stack, but commit 2a0fb340 ("scsi: lpfc: Correct localport timeout duration error") subsequently changed the code to reference the completion through a pointer in the object rather than the local stack variable. Fix this by using the stack variable directly. Link: https://lore.kernel.org/r/20200729231011.13240-1-emilne@redhat.com Fixes: 2a0fb340 ("scsi: lpfc: Correct localport timeout duration error") Reviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stafford Horne authored
[ Upstream commit 57b8e277 ] When dumping a stack with 'cat /proc/#/stack' the kernel would oops. For example: # cat /proc/690/stack Unable to handle kernel access at virtual address 0x7fc60f58 Oops#: 0000 CPU #: 0 PC: c00097fc SR: 0000807f SP: d6f09b9c GPR00: 00000000 GPR01: d6f09b9c GPR02: d6f09bb8 GPR03: d6f09bc4 GPR04: 7fc60f5c GPR05: c00099b4 GPR06: 00000000 GPR07: d6f09ba3 GPR08: ffffff00 GPR09: c0009804 GPR10: d6f08000 GPR11: 00000000 GPR12: ffffe000 GPR13: dbb86000 GPR14: 00000001 GPR15: dbb86250 GPR16: 7fc60f63 GPR17: 00000f5c GPR18: d6f09bc4 GPR19: 00000000 GPR20: c00099b4 GPR21: ffffffc0 GPR22: 00000000 GPR23: 00000000 GPR24: 00000001 GPR25: 000002c6 GPR26: d78b6850 GPR27: 00000001 GPR28: 00000000 GPR29: dbb86000 GPR30: ffffffff GPR31: dbb862fc RES: 00000000 oGPR11: ffffffff Process cat (pid: 702, stackpage=d79d6000) Stack: Call trace: [<598977f2>] save_stack_trace_tsk+0x40/0x74 [<95063f0e>] stack_trace_save_tsk+0x44/0x58 [<b557bfdd>] proc_pid_stack+0xd0/0x13c [<a2df8eda>] proc_single_show+0x6c/0xf0 [<e5a737b7>] seq_read+0x1b4/0x688 [<2d6c7480>] do_iter_read+0x208/0x248 [<2182a2fb>] vfs_readv+0x64/0x90 This was caused by the stack trace code in save_stack_trace_tsk using the wrong stack pointer. It was using the user stack pointer instead of the kernel stack pointer. Fix this by using the right stack. Also for good measure we add try_get_task_stack/put_task_stack to ensure the task is not lost while we are walking it's stack. Fixes: eecac38b ("openrisc: support framepointers and STACKTRACE_SUPPORT") Signed-off-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit c7c9e914 ] Due to the lockless design of the driver, it is theoretically possible to access a NULL pointer, if a slave interrupt was running while we were unregistering the slave. To make this rock solid, disable the interrupt for a short time while we are clearing the interrupt_enable register. This patch is purely based on code inspection. The OOPS is super-hard to trigger because clearing SAR (the address) makes interrupts even more unlikely to happen as well. While here, reinit SCR to SDBS because this bit should always be set according to documentation. There is no effect, though, because the interface is disabled. Fixes: 7b814d85 ("i2c: rcar: avoid race when unregistering slave client") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Thomas Hebb authored
[ Upstream commit e3232c2f ] commit c8c18867 ("tools build: Use the same CC for feature detection and actual build") changed these assignments from unconditional (:=) to conditional (?=) so that they wouldn't clobber values from the environment. However, conditional assignment does not work properly for variables that Make implicitly sets, among which are CC and CXX. To quote tools/scripts/Makefile.include, which handles this properly: # Makefiles suck: This macro sets a default value of $(2) for the # variable named by $(1), unless the variable has been set by # environment or command line. This is necessary for CC and AR # because make sets default values, so the simpler ?= approach # won't work as expected. In other words, the conditional assignments will not run even if the variables are not overridden in the environment; Make will set CC to "cc" and CXX to "g++" when it starts[1], meaning the variables are not empty by the time the conditional assignments are evaluated. This breaks cross-compilation when CROSS_COMPILE is set but CC isn't, since "cc" gets used for feature detection instead of the cross compiler (and likewise for CXX). To fix the issue, just pass down the values of CC and CXX computed by the parent Makefile, which gets included by the Makefile that actually builds whatever we're detecting features for and so is guaranteed to have good values. This is a better solution anyway, since it means we aren't trying to replicate the logic of the parent build system and so don't risk it getting out of sync. Leave PKG_CONFIG alone, since 1) there's no common logic to compute it in Makefile.include, and 2) it's not an implicit variable, so conditional assignment works properly. [1] https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html Fixes: c8c18867 ("tools build: Use the same CC for feature detection and actual build") Signed-off-by:
Thomas Hebb <tommyhebb@gmail.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: thomas hebb <tommyhebb@gmail.com> Link: http://lore.kernel.org/lkml/0a6e69d1736b0fa231a648f50b0cce5d8a6734ef.1595822871.git.tommyhebb@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Rayagonda Kokatanur authored
[ Upstream commit 6ced5ff0 ] Handle clk_get_rate() returning 0 to avoid possible division by zero. Fixes: daa5abc4 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by:
Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Xu Wang authored
[ Upstream commit 12b90b40 ] In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200713032143.21362-1-vulab@iscas.ac.cnAcked-by:
Barry Song <baohua@kernel.org> Fixes: 7bf21bc8 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 314139f9 ] When the SSR interrupt is activated, it will detect every STOP condition on the bus, not only the ones after we have been addressed. So, enable this interrupt only after we have been addressed, and disable it otherwise. Fixes: de20d185 ("i2c: rcar: add slave support") Signed-off-by:
-
Liu Yi L authored
[ Upstream commit 5f77d6ca ] Set proper masks to avoid invalid input spillover to reserved bits. Signed-off-by:
Liu Yi L <yi.l.liu@intel.com> Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200724014925.15523-2-baolu.lu@linux.intel.comSigned-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit dee9d154 ] It is possible for the call to omap_iommu_dump_ctx to return a negative error number, so check for the failure and return the error number rather than pass the negative value to simple_read_from_buffer. Fixes: 14e0e679 ("OMAP: iommu: add initial debugfs support") Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 3563b9be ] With commit 4a4a5e5d ("powerpc/pkeys: key allocation/deallocation must not change pkey registers") we are not updating UAMOR on key allocation. So don't update the expected uamor value in the test. Fixes: 4a4a5e5d ("powerpc/pkeys: key allocation/deallocation must not change pkey registers") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200709032946.881753-23-aneesh.kumar@linux.ibm.comSigned-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 0eaa3b5c ] Signed-off-by:
-
Aneesh Kumar K.V authored
[ Upstream commit 9a11f12e ] Rename variable to indicate that they are invalid values which we will use to test ptrace update of pkeys. Signed-off-by:
-
Ming Lei authored
[ Upstream commit e766668c ] dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't formally stop the blk-mq queue; therefore there is no point making the blk_mq_queue_stopped() check -- it will never be stopped. In addition, even though dm_stop_queue() actually tries to quiesce hw queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced() to avoid unnecessary queue quiesce isn't reliable because: the QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and dm_stop_queue() may be called when synchronize_rcu() from another blk_mq_quiesce_queue() is in-progress. Fixes: 7b17c2f7 ("dm: Fix a race condition related to stopping and starting queues") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Steve Longerbeam authored
[ Upstream commit 0f6245f4 ] Combine the rotate_irq() and norotate_irq() handlers into a single eof_irq() handler. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 2b26e34e ] To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.comTested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ce054039 ] Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ab4cc4ef ] Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by:
-
Paul Kocialkowski authored
[ Upstream commit 0f879bab ] Setting the output CSC mode is required for a YUV output, but must not be set when the input is also YUV. Doing this (as tested with a YUV420P to YUV420P conversion) results in wrong colors. Adapt the logic to only set the output CSC mode when the output is YUV and the input is RGB. Also add a comment to clarify the rationale. Fixes: f7e7b48e ("[media] rockchip/rga: v4l2 m2m support") Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit ded874ec ] This introduces two macros: RGA_COLOR_FMT_IS_YUV and RGA_COLOR_FMT_IS_RGB which allow quick checking of the colorspace familily of a RGA color format. These macros are then used to refactor the logic for CSC mode selection. The two nested tests for input colorspace are simplified into a single one, with a logical and, making the whole more readable. Signed-off-by:
-
Jason Gunthorpe authored
[ Upstream commit 65936bf2 ] ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that the only time flush_workqueue() can be called is if it also clears IPOIB_FLAG_OPER_UP. Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky enough, and lockdep doesn't help us to find it early: CPU0 CPU1 CPU2 __ipoib_ib_dev_flush() down_read(vlan_rwsem) ipoib_vlan_add() rtnl_trylock() down_write(vlan_rwsem) ipoib_mcast_carrier_on_task() while (!rtnl_trylock()) msleep(20); ipoib_flush_ah() flush_workqueue(priv->wq) Clean up the ah_reaper related functions and lifecycle to make sense: - Start/Stop of the reaper should only be done in open/stop NDOs, not in any other places - cancel and flush of the reaper should only happen in the stop NDO. cancel is only functional when combined with IPOIB_STOP_REAPER. - Non-stop places were flushing the AH's just need to flush out dead AH's synchronously and ignore the background task completely. It is fully locked and harmless to leave running. Which ultimately fixes the ABBA deadlock by removing the unnecessary flush_workqueue() from the problematic place under the vlan_rwsem. Fixes: efc82eee ("IB/ipoib: No longer use flush as a parameter") Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.comReported-by:
Kamal Heib <kheib@redhat.com> Tested-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Kamal Heib authored
[ Upstream commit 95a5631f ] The return value from ipoib_ib_dev_stop() is always 0 - change it to be void. Link: https://lore.kernel.org/r/20200623105236.18683-1-kamalheib1@gmail.comSigned-off-by:
Kamal Heib <kamalheib1@gmail.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit ddff6c45 ] Whilst it doesn't matter if the internal 32k clock register settings are cleaned up on exit, as the part will be turned off losing any settings, hence the driver hasn't historially bothered. The external clock should however be cleaned up, as it could cause clocks to be left on, and will at best generate a warning on unbind. Add clean up on both the probe error path and unbind for the 32k clock. Fixes: cdd8da8c ("mfd: arizona: Add gating of external MCLKn clocks") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Liu Ying authored
commit 3b2a9995 upstream. Both of the two LVDS channels should be disabled for split mode in the encoder's ->disable() callback, because they are enabled in the encoder's ->enable() callback. Fixes: 6556f7f8 ("drm: imx: Move imx-drm driver out of staging") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
Sibi Sankar authored
commit 5b7be880 upstream. Sometimes the stop triggers a watchdog rather than a stop-ack. Update the running state to false on requesting stop to skip the watchdog instead. Error Logs: $ echo stop > /sys/class/remoteproc/remoteproc0/state ipa 1e40000.ipa: received modem stopping event remoteproc-modem: watchdog received: sys_m_smsm_mpss.c:291:APPS force stop qcom-q6v5-mss 4080000.remoteproc-modem: port failed halt ipa 1e40000.ipa: received modem offline event remoteproc0: stopped remote processor 4080000.remoteproc-modem Reviewed-by:
Evan Green <evgreen@chromium.org> Fixes: 3b415c8f ("remoteproc: q6v5: Extract common resource handling") Cc: stable@vger.kernel.org Signed-off-by:
Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200602163257.26978-1-sibis@codeaurora.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
commit 401136bb upstream. While walking code towards a FUP ip, the packet state is INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely. The result was an occasional lost EXSTOP event. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200710151104.15137-2-adrian.hunter@intel.comSigned-off-by:
-
Kees Cook authored
commit 11990a5b upstream. The only-root-readable /sys/module/$module/sections/$section files did not truncate their output to the available buffer size. While most paths into the kernfs read handlers end up using PAGE_SIZE buffers, it's possible to get there through other paths (e.g. splice, sendfile). Actually limit the output to the "count" passed into the read function, and report it back correctly. *sigh* Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/20200805002015.GE23458@shao2-debian Fixes: ed66f991 ("module: Refactor section attr into bin attribute") Cc: stable@vger.kernel.org Reviewed-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Anton Blanchard authored
commit 89c140bb upstream. Booting with a 4GB LMB size causes us to panic: qemu-system-ppc64: OS terminated: OS panic: Memory block size not suitable: 0x0 Fix pseries_memory_block_size() to handle 64 bit LMBs. Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@ozlabs.org> Signed-off-by:
-
Ahmad Fatoum authored
commit 4f39d575 upstream. The flag indicating a watchdog timeout having occurred normally persists till Power-On Reset of the Fintek Super I/O chip. The user can clear it by writing a `1' to the bit. The driver doesn't offer a restart method, so regular system reboot might not reset the Super I/O and if the watchdog isn't enabled, we won't touch the register containing the bit on the next boot. In this case all subsequent regular reboots will be wrongly flagged by the driver as being caused by the watchdog. Fix this by having the flag cleared after read. This is also done by other drivers like those for the i6300esb and mpc8xxx_wdt. Fixes: b97cb21a ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read") Cc: stable@vger.kernel.org Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by:
-
Ahmad Fatoum authored
commit 80214146 upstream. The flags that should be or-ed into the watchdog_info.options by drivers all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the driver's watchdog_ops has a usable set_timeout. WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which equals: WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY | WDIOF_MAGICCLOSE | 0xc0045000 These were so far indicated to userspace on WDIOC_GETSUPPORT. As the driver has not yet been migrated to the new watchdog kernel API, the constant can just be dropped without substitute. Fixes: 96cb4eb0 ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG") Cc: stable@vger.kernel.org Signed-off-by:
-
Ahmad Fatoum authored
commit e871e93f upstream. The driver supports populating bootstatus with WDIOF_CARDRESET, but so far userspace couldn't portably determine whether absence of this flag meant no watchdog reset or no driver support. Or-in the bit to fix this. Fixes: b97cb21a ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read") Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt (VMware) authored
commit afcab636 upstream. On exit, if a process is preempted after the trace_sched_process_exit() tracepoint but before the process is done exiting, then when it gets scheduled in, the function tracers will not filter it properly against the function tracing pid filters. That is because the function tracing pid filters hooks to the sched_process_exit() tracepoint to remove the exiting task's pid from the filter list. Because the filtering happens at the sched_switch tracepoint, when the exiting task schedules back in to finish up the exit, it will no longer be in the function pid filtering tables. This was noticeable in the notrace self tests on a preemptable kernel, as the tests would fail as it exits and preempted after being taken off the notrace filter table and on scheduling back in it would not be in the notrace list, and then the ending of the exit function would trace. The test detected this and would fail. Cc: stable@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1e10486f ("ftrace: Add 'function-fork' trace option") Fixes: c37775d5 ("tracing: Add infrastructure to allow set_event_pid to follow children" Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Kevin Hao authored
commit 96b4833b upstream. In calculation of the cpu mask for the hwlat kernel thread, the wrong cpu mask is used instead of the tracing_cpumask, this causes the tracing/tracing_cpumask useless for hwlat tracer. Fixes it. Link: https://lkml.kernel.org/r/20200730082318.42584-2-haokexin@gmail.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Muchun Song authored
commit 0cb2f137 upstream. We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information): BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0 RSP: 0018:ffffb512c6550998 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000 RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0 RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ftrace_ops_assist_func+0x56/0xe0 ftrace_call+0x5/0x34 tcpa_statistic_send+0x5/0x130 [ttcp_engine] The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump. crash> dis tcpa_statistic_send -r <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller> The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path. Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko. 1) insmod kprobe_test.ko 2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' 3) echo 0 > /proc/sys/kernel/ftrace_enabled 4) rmmod kprobe_test 5) stop step 2) kprobe 6) insmod kprobe_test.ko 7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away. Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com Cc: stable@vger.kernel.org Fixes: ae6aa16f ("kprobes: introduce ftrace based optimization") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Co-developed-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
-
Chengming Zhou authored
commit 8a224ffb upstream. When module loaded and enabled, we will use __ftrace_replace_code for module if any ftrace_ops referenced it found. But we will get wrong ftrace_addr for module rec in ftrace_get_addr_new, because rec->flags has not been setup correctly. It can cause the callback function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called with pt_regs set to NULL. So setup correct FTRACE_FL_REGS flags for rec when we call referenced_filters to find ftrace_ops references it. Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com Cc: stable@vger.kernel.org Fixes: 8c4f3c3f ("ftrace: Check module functions being traced on reload") Signed-off-by:
-
Michal Koutný authored
commit a6f23d14 upstream. When workload runs in cgroups that aren't directly below root cgroup and their parent specifies reclaim protection, it may end up ineffective. The reason is that propagate_protected_usage() is not called in all hierarchy up. All the protected usage is incorrectly accumulated in the workload's parent. This means that siblings_low_usage is overestimated and effective protection underestimated. Even though it is transitional phenomenon (uncharge path does correct propagation and fixes the wrong children_low_usage), it can undermine the intended protection unexpectedly. We have noticed this problem while seeing a swap out in a descendant of a protected memcg (intermediate node) while the parent was conveniently under its protection limit and the memory pressure was external to that hierarchy. Michal has pinpointed this down to the wrong siblings_low_usage which led to the unwanted reclaim. The fix is simply updating children_low_usage in respective ancestors also in the charging path. Fixes: 23067153 ("mm: memory.low hierarchical behavior") Signed-off-by:
Michal Koutný <mkoutny@suse.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> [4.18+] Link: http://lkml.kernel.org/r/20200803153231.15477-1-mhocko@kernel.orgSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Junxiao Bi authored
commit 38d51b2d upstream. Dan Carpenter reported the following static checker warning. fs/ocfs2/super.c:1269 ocfs2_parse_options() warn: '(-1)' 65535 can't fit into 32767 'mopt->slot' fs/ocfs2/suballoc.c:859 ocfs2_init_inode_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_inode_steal_slot' fs/ocfs2/suballoc.c:867 ocfs2_init_meta_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_meta_steal_slot' That's because OCFS2_INVALID_SLOT is (u16)-1. Slot number in ocfs2 can be never negative, so change s16 to u16. Fixes: 9277f833 ("ocfs2: fix value of OCFS2_INVALID_SLOT") Reported-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200627001259.19757-1-junxiao.bi@oracle.comSigned-off-by:
-
