If we errored out on a new stripe before fully allocating it, we
shouldn't be zeroing out unwritten data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a null ptr deref when creating new snapshots:
bch2_create_trans() will lookup the subvolume and find the _new_
snapshot in the BCH_CREATE_SUBVOL path that's being created in that
transaction.

We have to call bch2_mark_snapshot() earlier so that it's properly
initialized, instead of leaving it for transaction commit.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Print out the alloc reserve, and format it a bit more nicely.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This changes the write path to not add write ops to to the write_point's
list of pending work items until it's ready; this means we have to
change the lock protecting it to an irq-safe lock, but means
bch2_write_point_do_index_updates() no longer has to iterate over the
list, which is beneficial with the way the new BCH_WRITE_WAIT_FOR_EC
code works.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is not technically correct - it's subject to a race if we ever end
up with a stripe with all empty blocks (that needs to be deleted) being
held open. But the "correct" version was much too inefficient, and soon
we'll be adding a stripes LRU.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes an infinite loop in bch2_get_key_or_real_bucket_hole().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This will be used for move writes, which will be waiting until the
stripe is created to do the index update. They need to prevent the
stripe from being reclaimed until their index update is done, so we need
another refcount that just keeps the stripe open.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

# Conflicts:
#	fs/bcachefs/ec.c
#	fs/bcachefs/io.c

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This makes some improvements to the logic for adding/removing replicas,
as part of the larger erasure coding improvements. We now directly
consider number of replicas desired for the given inode, and
extent/pointer durability: this ensures that the extent ends up with the
desired number of replicas when we're replacing multiple pointers with
one that has higher durability (e.g. erasure coded).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

 - __bch2_bkey_drop_ptr() -> bch2_bkey_drop_ptr_noerror(), now available
   outside extents.

 - Split bch2_bkey_has_device() and bch2_bkey_has_device_c(), const and
   non const versions

 - bch2_extent_has_ptr() now returns the pointer it found
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The copygc code itself now calls this when all moves from a given bucket
are complete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This isn't a real error, and doesn't need to be printed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now, any open_bucket can go on the partial list: allocating from the
partial list has been moved to its own dedicated function,
open_bucket_add_bucets() -> bucket_alloc_set_partial().

In particular, this means that erasure coded buckets can safely go on
the partial list; the new location works with the "allocate an ec bucket
first, then the rest" logic.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

fstest generic/388 occasionally reproduces corruptions where an
inode has extents beyond i_size. This is a deliberate crash and
recovery test, and the post crash+recovery characteristics are
usually the same: the inode exists on disk in an early (i.e. just
allocated) state based on the journal sequence number associated
with the inode. Subsequent inode updates exist in the journal at
higher sequence numbers, but the inode hadn't been written back
before the associated crash and the post-crash recovery processes a
set of journal sequence numbers that doesn't include updates to the
inode. In fact, the sequence with the most recent inode key update
always happens to be the sequence just before the front of the
journal processed by recovery.

This last bit is a significant hint that the problem relates to an
on-disk journal update of the front of the journal. The root cause
of this problem is basically that the inode is updated (multiple
times) in-core and in the key cache, each time bumping the key cache
sequence number used to control the cache flush. The cache flush
skips one or more times, bumping the associated key cache journal
pin to the key cache seq value. This has a side effect of holding
the inode in memory a bit longer than normal, which helps exacerbate
this problem, but is also unsafe in certain cases where the key
cache seq may have been updated by a transaction commit that didn't
journal the associated key.

For example, consider an inode that has been allocated, updated
several times in the key cache, journaled, but not yet written back.
At this stage, everything should be consistent if the fs happens to
crash because the latest update has been journal. Now consider a key
update via bch2_extent_update_i_size_sectors() that uses the
BTREE_UPDATE_NOJOURNAL flag. While this update may not change inode
state, it can have the side effect of bumping ck->seq in
bch2_btree_insert_key_cached(). In turn, if a subsequent key cache
flush skips due to seq not matching the former, the ck->journal pin
is updated to ck->seq even though the most recent key update was not
journaled. If this pin happens to reside at the front (tail) of the
journal, this means a subsequent journal write can update last_seq
to a value beyond that which includes the most recent update to the
inode. If this occurs and the fs happens to crash before the inode
happens to flush, recovery will see the latest last_seq, fail to
recover the inode and leave the inode in the inconsistent state
described above.

To avoid this problem, skip the key cache seq update on NOJOURNAL
commits, except on initial pin add. Pass the insert entry directly
to bch2_btree_insert_key_cached() to make the associated flag
available and be consistent with btree_insert_key_leaf().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is a workaround for a lost wakeup bug we've been seeing - we still
need to discover the actual bug.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

 - Fix a sleeping-in-atomic bug due to calling
   bch2_journal_buckets_to_sb() under the journal lock.
 - Additionally, now we mark buckets as journal buckets before adding
   them to the journal in memory and the superblock. This ensures that
   if we crash part way through we'll never be writing to journal
   buckets that aren't marked correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Minor refactoring for the Rust interface.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pulling out a helper from cmd_list.c, as the rest is being rewritten in
Rust but we're not ready to rewrite lower-level btree code in Rust.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is for the Rust interface - Rust cares more about const than C
does.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This improves copygc pipelining across multiple buckets: we now track
each in flight bucket we're evacuating, with separate moving_contexts.

This means that whereas previously we had to wait for outstanding moves
to complete to ensure we didn't try to evacuate the same bucket twice,
we can now just check buckets we want to evacuate against the pending
list.

This also mean we can run the verify_bucket_evacuated() check without
killing pipelining - meaning it can now always be enabled, not just on
debug builds.

This is going to be important for the upcoming erasure coding work,
where moving IOs that are being erasure coded will now skip the initial
replication step; instead the IOs will wait on the stripe to complete.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It's possible that we reuse a stripe that doesn't have quite the same
configuration as the stripe_head we're allocating from. In that case, we
have to make sure that the new stripe uses the settings from the stripe
we resue, not the stripe head, and make sure the buffer is allocated
correctly.

This fixes the ec_mixed_tiers test.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Rust bindgen doesn't cope well with anonymous structs and unions. This
patch drops the fancy anonymous structs & unions in bkey_i that let us
use the same helpers for bkey_i and bkey_packed; since bkey_packed is an
internal type that's never exposed to outside code, it's only a minor
inconvenienc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Rust bindgen doesn't do anonymous structs very nicely: BKEY_PADDED()
only needs the anonymous struct when it's used on the stack, to
guarantee layout, not when it's embedded in another struct.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Rework stripe creation path - new algorithm for deciding when to create
new stripes or reuse existing stripes.

We add a new allocation watermark, RESERVE_stripe, above RESERVE_none.
Then we always try to create a new stripe by doing RESERVE_stripe
allocations; if this fails, we reuse an existing stripe and allocate
buckets for it with the reserve watermark for the given write
(RESERVE_none or RESERVE_movinggc).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Currently, we don't use bucket data type for tracking whether buckets
are part of a stripe; parity buckets are BCH_DATA_parity, but data
buckets in a stripe are BCH_DATA_user. There's a separate counter,
buckets_ec, outside the BCH_DATA_TYPES system for tracking number of
buckets on a device that are part of a stripe.

The trouble with this approach is that it's too coarse grained, and we
need better information on fragmentation for debugging copygc.

With this patch, data buckets in a stripe are now tracked as
BCH_DATA_stripe buckets.

This doesn't yet differentiate between erasure coded and non-erasure
coded data in a stripe bucket, nor do we yet track empty data buckets in
stripes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes some confusion in the lockdep code due to initializing btree
node/key cache locks with the same lockdep key, but different names.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Soon, __bch2_btree_node_write() is going to require a btree_trans: zoned
device support is going to require a new allocation for every btree node
write. This is a bit of prep work.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now we also print the number of buckets reserved for each watermark.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>