- 06 Aug, 2015 40 commits
-
-
Ralf Baechle authored
commit f05ff433 upstream. This is no longer needed with the fixed, new and improved definition of cpu_has_mips_r2_exec_hazard in <asm/cpu-features.h>. For a discussion, see http://patchwork.linux-mips.org/patch/9539/. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ralf Baechle authored
commit 9cdf30bd upstream. Returns a non-zero value if the current processor implementation requires an IHB instruction to deal with an instruction hazard as per MIPS R2 architecture specification, zero otherwise. For a discussion, see http://patchwork.linux-mips.org/patch/9539/. Signed-off-by:
-
Alexander Sverdlin authored
commit 73bf3c2a upstream. udelay() in PCI/PCIe read/write callbacks cause 30ms IRQ latency on Octeon platforms because these operations are called from PCI_OP_READ() and PCI_OP_WRITE() under raw_spin_lock_irqsave(). Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: linux-mips@linux-mips.org Cc: David Daney <ddaney@cavium.com> Cc: Rob Herring <robh@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Mathias <mathias.rulf@nokia.com> Patchwork: https://patchwork.linux-mips.org/patch/9576/Signed-off-by:
-
Lars Persson authored
commit 4d46a67a upstream. The lazy cache flushing implemented in the MIPS kernel suffers from a race condition that is exposed by do_set_pte() in mm/memory.c. A pre-condition is a file-system that writes to the page from the CPU in its readpage method and then calls flush_dcache_page(). One example is ubifs. Another pre-condition is that the dcache flush is postponed in __flush_dcache_page(). Upon a page fault for an executable mapping not existing in the page-cache, the following will happen: 1. Write to the page 2. flush_dcache_page 3. flush_icache_page 4. set_pte_at 5. update_mmu_cache (commits the flush of a dcache-dirty page) Between steps 4 and 5 another thread can hit the same page and it will encounter a valid pte. Because the data still is in the L1 dcache the CPU will fetch stale data from L2 into the icache and execute garbage. This fix moves the commit of the cache flush to step 3 to close the race window. It also reduces the amount of flushes on non-executable mappings because we never enter __flush_dcache_page() for non-aliasing CPUs. Regressions can occur in drivers that mistakenly relies on the flush_dcache_page() in get_user_pages() for DMA operations. [ralf@linux-mips.org: Folded in patch 9346 to fix highmem issue.] Signed-off-by:
Lars Persson <larper@axis.com> Cc: linux-mips@linux-mips.org Cc: paul.burton@imgtec.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9346/ Patchwork: https://patchwork.linux-mips.org/patch/9738/Signed-off-by:
-
Ben Greear authored
commit 34376a50 upstream. The stop machine logic can lock up if all but one of the migration threads make it through the disable-irq step and the one remaining thread gets stuck in __do_softirq. The reason __do_softirq can hang is that it has a bail-out based on jiffies timeout, but in the lockup case, jiffies itself is not incremented. To work around this, re-add the max_restart counter in __do_irq and stop processing irqs after 10 restarts. Thanks to Tejun Heo and Rusty Russell and others for helping me track this down. This was introduced in 3.9 by commit c10d7367 ("softirq: reduce latencies"). It may be worth looking into ath9k to see if it has issues with its irq handler at a later date. The hang stack traces look something like this: ------------[ cut here ]------------ WARNING: at kernel/watchdog.c:245 watchdog_overflow_callback+0x9c/0xa7() Watchdog detected hard LOCKUP on cpu 2 Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc] Pid: 23, comm: migration/2 Tainted: G C 3.9.4+ #11 Call Trace: <NMI> warn_slowpath_common+0x85/0x9f warn_slowpath_fmt+0x46/0x48 watchdog_overflow_callback+0x9c/0xa7 __perf_event_overflow+0x137/0x1cb perf_event_overflow+0x14/0x16 intel_pmu_handle_irq+0x2dc/0x359 perf_event_nmi_handler+0x19/0x1b nmi_handle+0x7f/0xc2 do_nmi+0xbc/0x304 end_repeat_nmi+0x1e/0x2e <<EOE>> cpu_stopper_thread+0xae/0x162 smpboot_thread_fn+0x258/0x260 kthread+0xc7/0xcf ret_from_fork+0x7c/0xb0 ---[ end trace 4947dfa9b0a4cec3 ]--- BUG: soft lockup - CPU#1 stuck for 22s! [migration/1:17] Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc] irq event stamp: 835637905 hardirqs last enabled at (835637904): __do_softirq+0x9f/0x257 hardirqs last disabled at (835637905): apic_timer_interrupt+0x6d/0x80 softirqs last enabled at (5654720): __do_softirq+0x1ff/0x257 softirqs last disabled at (5654725): irq_exit+0x5f/0xbb CPU 1 Pid: 17, comm: migration/1 Tainted: G WC 3.9.4+ #11 To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M. RIP: tasklet_hi_action+0xf0/0xf0 Process migration/1 Call Trace: <IRQ> __do_softirq+0x117/0x257 irq_exit+0x5f/0xbb smp_apic_timer_interrupt+0x8a/0x98 apic_timer_interrupt+0x72/0x80 <EOI> printk+0x4d/0x4f stop_machine_cpu_stop+0x22c/0x274 cpu_stopper_thread+0xae/0x162 smpboot_thread_fn+0x258/0x260 kthread+0xc7/0xcf ret_from_fork+0x7c/0xb0 Signed-off-by:
Ben Greear <greearb@candelatech.com> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Pekka Riikonen <priikone@iki.fi> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Eric Dumazet authored
commit c10d7367 upstream. In various network workloads, __do_softirq() latencies can be up to 20 ms if HZ=1000, and 200 ms if HZ=100. This is because we iterate 10 times in the softirq dispatcher, and some actions can consume a lot of cycles. This patch changes the fallback to ksoftirqd condition to : - A time limit of 2 ms. - need_resched() being set on current task When one of this condition is met, we wakeup ksoftirqd for further softirq processing if we still have pending softirqs. Using need_resched() as the only condition can trigger RCU stalls, as we can keep BH disabled for too long. I ran several benchmarks and got no significant difference in throughput, but a very significant reduction of latencies (one order of magnitude) : In following bench, 200 antagonist "netperf -t TCP_RR" are started in background, using all available cpus. Then we start one "netperf -t TCP_RR", bound to the cpu handling the NIC IRQ (hard+soft) Before patch : # netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind RT_LATENCY=550110.424 MIN_LATENCY=146858 MAX_LATENCY=997109 P50_LATENCY=305000 P90_LATENCY=550000 P99_LATENCY=710000 MEAN_LATENCY=376989.12 STDDEV_LATENCY=184046.92 After patch : # netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind RT_LATENCY=40545.492 MIN_LATENCY=9834 MAX_LATENCY=78366 P50_LATENCY=33583 P90_LATENCY=59000 P99_LATENCY=69000 MEAN_LATENCY=38364.67 STDDEV_LATENCY=12865.26 Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: David Miller <davem@davemloft.net> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan McGee authored
commit fa8cbaaf upstream. Since commit 8a0a9bd4, this comment in mmap_rnd() does not hold true as the value returned by get_random_int() will in fact be different every single call. Remove the comment and simplify the code back to its original desired form. This reverts commit a5adc91a which is no longer necessary and also fixes the sparc code that copied this same adjustment. Signed-off-by:
Dan McGee <dpmcgee@gmail.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Mark Grondona authored
commit 73af963f upstream. __ptrace_may_access() checks get_dumpable/ptrace_has_cap/etc if task != current, this can can lead to surprising results. For example, a sub-thread can't readlink("/proc/self/exe") if the executable is not readable. setup_new_exec()->would_dump() notices that inode_permission(MAY_READ) fails and then it does set_dumpable(suid_dumpable). After that get_dumpable() fails. (It is not clear why proc_pid_readlink() checks get_dumpable(), perhaps we could add PTRACE_MODE_NODUMPABLE) Change __ptrace_may_access() to use same_thread_group() instead of "task == current". Any security check is pointless when the tasks share the same ->mm. Signed-off-by:
Mark Grondona <mgrondona@llnl.gov> Signed-off-by:
Ben Woodard <woodard@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Oleg Nesterov authored
commit e1403b8e upstream. task_struct->pid/tgid should go away. 1. Change same_thread_group() to use task->signal for comparison. 2. Change has_group_leader_pid(task) to compare task_pid(task) with signal->leader_pid. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Feng Tang authored
commit 55c844a4 upstream. When rebooting our 24 CPU Westmere servers with 3.4-rc6, we always see this warning msg: Restarting system. machine restart ------------[ cut here ]------------ WARNING: at arch/x86/kernel/smp.c:125 native_smp_send_reschedule+0x74/0xa7() Hardware name: X8DTN Modules linked in: igb [last unloaded: scsi_wait_scan] Pid: 1, comm: systemd-shutdow Not tainted 3.4.0-rc6+ #22 Call Trace: <IRQ> [<ffffffff8102a41f>] warn_slowpath_common+0x7e/0x96 [<ffffffff8102a44c>] warn_slowpath_null+0x15/0x17 [<ffffffff81018cf7>] native_smp_send_reschedule+0x74/0xa7 [<ffffffff810561c1>] trigger_load_balance+0x279/0x2a6 [<ffffffff81050112>] scheduler_tick+0xe0/0xe9 [<ffffffff81036768>] update_process_times+0x60/0x70 [<ffffffff81062f2f>] tick_sched_timer+0x68/0x92 [<ffffffff81046e33>] __run_hrtimer+0xb3/0x13c [<ffffffff81062ec7>] ? tick_nohz_handler+0xd0/0xd0 [<ffffffff810474f2>] hrtimer_interrupt+0xdb/0x198 [<ffffffff81019a35>] smp_apic_timer_interrupt+0x81/0x94 [<ffffffff81655187>] apic_timer_interrupt+0x67/0x70 <EOI> [<ffffffff8101a3c4>] ? default_send_IPI_mask_allbutself_phys+0xb4/0xc4 [<ffffffff8101c680>] physflat_send_IPI_allbutself+0x12/0x14 [<ffffffff81018db4>] native_nmi_stop_other_cpus+0x8a/0xd6 [<ffffffff810188ba>] native_machine_shutdown+0x50/0x67 [<ffffffff81018926>] machine_shutdown+0xa/0xc [<ffffffff8101897e>] native_machine_restart+0x20/0x32 [<ffffffff810189b0>] machine_restart+0xa/0xc [<ffffffff8103b196>] kernel_restart+0x47/0x4c [<ffffffff8103b2e6>] sys_reboot+0x13e/0x17c [<ffffffff8164e436>] ? _raw_spin_unlock_bh+0x10/0x12 [<ffffffff810fcac9>] ? bdi_queue_work+0xcf/0xd8 [<ffffffff810fe82f>] ? __bdi_start_writeback+0xae/0xb7 [<ffffffff810e0d64>] ? iterate_supers+0xa3/0xb7 [<ffffffff816547a2>] system_call_fastpath+0x16/0x1b ---[ end trace 320af5cb1cb60c5b ]--- The root cause seems to be the default_send_IPI_mask_allbutself_phys() takes quite some time (I measured it could be several ms) to complete sending NMIs to all the other 23 CPUs, and for HZ=250/1000 system, the time is long enough for a timer interrupt to happen, which will in turn trigger to kick load balance to a stopped CPU and cause this warning in native_smp_send_reschedule(). So disabling the local irq before stop_other_cpu() can fix this problem (tested 25 times reboot ok), and it is fine as there should be nobody caring the timer interrupt in such reboot stage. The latest 3.4 kernel slightly changes this behavior by sending REBOOT_VECTOR first and only send NMI_VECTOR if the REBOOT_VCTOR fails, and this patch is still needed to prevent the problem. Signed-off-by:
Feng Tang <feng.tang@intel.com> Acked-by:
Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120530231541.4c13433a@feng-i7Signed-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jim Snow authored
commit 8c009100 upstream. Signed-off-by:
Jim Snow <jim.snow@intel.com> Signed-off-by:
Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinson Lee <vlee@twopensource.com> [lizf: Backported to 3.4: - adjust context - use debugf0() instead of edac_dbg()] Signed-off-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 5b889e37 upstream. As reported by Josh Boyer <jwboyer@redhat.com>: > drivers/edac/sb_edac.c: In function 'get_memory_error_data': > drivers/edac/sb_edac.c:861:2: warning: left shift count >= width of type > [enabled by default] > <snip> > ERROR: "__udivdi3" [drivers/edac/sb_edac.ko] undefined! > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 PS.: compile-tested only Reported-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> [bwh: Prerequisite for "sb_edac: Fix erroneous bytes->gigabytes conversion"] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit a6dfa128 upstream. A huge amount of NIC drivers use the DMA API, however if compiled under 32-bit an very important part of the DMA API can be ommitted leading to the drivers not working at all (especially if used with 'swiotlb=force iommu=soft'). As Prashant Sreedharan explains it: "the driver [tg3] uses DEFINE_DMA_UNMAP_ADDR(), dma_unmap_addr_set() to keep a copy of the dma "mapping" and dma_unmap_addr() to get the "mapping" value. On most of the platforms this is a no-op, but ... with "iommu=soft and swiotlb=force" this house keeping is required, ... otherwise we pass 0 while calling pci_unmap_/pci_dma_sync_ instead of the DMA address." As such enable this even when using 32-bit kernels. Reported-by:
Ian Jackson <Ian.Jackson@eu.citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Prashant Sreedharan <prashant@broadcom.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Chan <mchan@broadcom.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: cascardo@linux.vnet.ibm.com Cc: david.vrabel@citrix.com Cc: sanjeevb@broadcom.com Cc: siva.kallam@broadcom.com Cc: vyasevich@gmail.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/20150417190448.GA9462@l.oracle.comSigned-off-by:
-
Junling Zheng authored
Based on 08adb7da upstream. We found that after v3.10.73, recvmsg might return -EFAULT while -EINVAL was expected. We tested it through the recvmsg01 testcase come from LTP testsuit. It set msg->msg_namelen to -1 and the recvmsg syscall returned errno 14, which is unexpected (errno 22 is expected): recvmsg01 4 TFAIL : invalid socket length ; returned -1 (expected -1), errno 14 (expected 22) Linux mainline has no this bug for commit 08adb7da fixes it accidentally. However, it is too large and complex to be backported to LTS 3.10. Commit 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) made get_compat_msghdr() return error if msg_sys->msg_namelen was negative, which changed the behaviors of recvmsg and sendmsg syscall in a lib32 system: Before commit 281c9c36, get_compat_msghdr() wouldn't fail and it would return -EINVAL in move_addr_to_user() or somewhere if msg_sys->msg_namelen was invalid and then syscall returned -EINVAL, which is correct. And now, when msg_sys->msg_namelen is negative, get_compat_msghdr() will fail and wants to return -EINVAL, however, the outer syscall will return -EFAULT directly, which is unexpected. This patch gets the return value of get_compat_msghdr() as well as copy_msghdr_from_user(), then returns this expected value if get_compat_msghdr() fails. Fixes: 281c9c36 (net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour) Signed-off-by:
Junling Zheng <zhengjunling@huawei.com> Signed-off-by:
Hanbing Xu <xuhanbing@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Joonsoo Kim authored
commit 43d77867 upstream. Current implementation of unfreeze_partials() is so complicated, but benefit from it is insignificant. In addition many code in do {} while loop have a bad influence to a fail rate of cmpxchg_double_slab. Under current implementation which test status of cpu partial slab and acquire list_lock in do {} while loop, we don't need to acquire a list_lock and gain a little benefit when front of the cpu partial slab is to be discarded, but this is a rare case. In case that add_partial is performed and cmpxchg_double_slab is failed, remove_partial should be called case by case. I think that these are disadvantages of current implementation, so I do refactoring unfreeze_partials(). Minimizing code in do {} while loop introduce a reduced fail rate of cmpxchg_double_slab. Below is output of 'slabinfo -r kmalloc-256' when './perf stat -r 33 hackbench 50 process 4000 > /dev/null' is done. ** before ** Cmpxchg_double Looping ------------------------ Locked Cmpxchg Double redos 182685 Unlocked Cmpxchg Double redos 0 ** after ** Cmpxchg_double Looping ------------------------ Locked Cmpxchg Double redos 177995 Unlocked Cmpxchg Double redos 1 We can see cmpxchg_double_slab fail rate is improved slightly. Bolow is output of './perf stat -r 30 hackbench 50 process 4000 > /dev/null'. ** before ** Performance counter stats for './hackbench 50 process 4000' (30 runs): 108517.190463 task-clock # 7.926 CPUs utilized ( +- 0.24% ) 2,919,550 context-switches # 0.027 M/sec ( +- 3.07% ) 100,774 CPU-migrations # 0.929 K/sec ( +- 4.72% ) 124,201 page-faults # 0.001 M/sec ( +- 0.15% ) 401,500,234,387 cycles # 3.700 GHz ( +- 0.24% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 250,576,913,354 instructions # 0.62 insns per cycle ( +- 0.13% ) 45,934,956,860 branches # 423.297 M/sec ( +- 0.14% ) 188,219,787 branch-misses # 0.41% of all branches ( +- 0.56% ) 13.691837307 seconds time elapsed ( +- 0.24% ) ** after ** Performance counter stats for './hackbench 50 process 4000' (30 runs): 107784.479767 task-clock # 7.928 CPUs utilized ( +- 0.22% ) 2,834,781 context-switches # 0.026 M/sec ( +- 2.33% ) 93,083 CPU-migrations # 0.864 K/sec ( +- 3.45% ) 123,967 page-faults # 0.001 M/sec ( +- 0.15% ) 398,781,421,836 cycles # 3.700 GHz ( +- 0.22% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 250,189,160,419 instructions # 0.63 insns per cycle ( +- 0.09% ) 45,855,370,128 branches # 425.436 M/sec ( +- 0.10% ) 169,881,248 branch-misses # 0.37% of all branches ( +- 0.43% ) 13.596272341 seconds time elapsed ( +- 0.22% ) No regression is found, but rather we can see slightly better result. Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Ben Hutchings authored
Commit 915f4f86 ("debugfs: leave freeing a symlink body until inode eviction", commit 0db59e59 upstream) changed debugfs to define its own super_operations and implement the evict_inode operation. Luis Henriques pointed out that it needs to define the statfs operation, as in simple_super_operations which it was using before. Reported-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Alexander Sverdlin authored
[ Upstream commit 29c4afc4 ] There is NULL pointer dereference possible during statistics update if the route used for OOTB responce is removed at unfortunate time. If the route exists when we receive OOTB packet and we finally jump into sctp_packet_transmit() to send ABORT, but in the meantime route is removed under our feet, we take "no_route" path and try to update stats with IP_INC_STATS(sock_net(asoc->base.sk), ...). But sctp_ootb_pkt_new() used to prepare responce packet doesn't call sctp_transport_set_owner() and therefore there is no asoc associated with this packet. Probably temporary asoc just for OOTB responces is overkill, so just introduce a check like in all other places in sctp_packet_transmit(), where "asoc" is dereferenced. To reproduce this, one needs to 0. ensure that sctp module is loaded (otherwise ABORT is not generated) 1. remove default route on the machine 2. while true; do ip route del [interface-specific route] ip route add [interface-specific route] done 3. send enough OOTB packets (i.e. HB REQs) from another host to trigger ABORT responce On x86_64 the crash looks like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ... CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.0.5-1-ARCH #1 Hardware name: ... task: ffffffff818124c0 ti: ffffffff81800000 task.ti: ffffffff81800000 RIP: 0010:[<ffffffffa05ec9ac>] [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP: 0018:ffff880127c037b8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000015ff66b480 RDX: 00000015ff66b400 RSI: ffff880127c17200 RDI: ffff880123403700 RBP: ffff880127c03888 R08: 0000000000017200 R09: ffffffff814625af R10: ffffea00047e4680 R11: 00000000ffffff80 R12: ffff8800b0d38a28 R13: ffff8800b0d38a28 R14: ffff8800b3e88000 R15: ffffffffa05f24e0 FS: 0000000000000000(0000) GS:ffff880127c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 00000000c855b000 CR4: 00000000000007f0 Stack: ffff880127c03910 ffff8800b0d38a28 ffffffff8189d240 ffff88011f91b400 ffff880127c03828 ffffffffa05c94c5 0000000000000000 ffff8800baa1c520 0000000000000000 0000000000000001 0000000000000000 0000000000000000 Call Trace: <IRQ> [<ffffffffa05c94c5>] ? sctp_sf_tabort_8_4_8.isra.20+0x85/0x140 [sctp] [<ffffffffa05d6b42>] ? sctp_transport_put+0x52/0x80 [sctp] [<ffffffffa05d0bfc>] sctp_do_sm+0xb8c/0x19a0 [sctp] [<ffffffff810b0e00>] ? trigger_load_balance+0x90/0x210 [<ffffffff810e0329>] ? update_process_times+0x59/0x60 [<ffffffff812c7a40>] ? timerqueue_add+0x60/0xb0 [<ffffffff810e0549>] ? enqueue_hrtimer+0x29/0xa0 [<ffffffff8101f599>] ? read_tsc+0x9/0x10 [<ffffffff8116d4b5>] ? put_page+0x55/0x60 [<ffffffff810ee1ad>] ? clockevents_program_event+0x6d/0x100 [<ffffffff81462b68>] ? skb_free_head+0x58/0x80 [<ffffffffa029a10b>] ? chksum_update+0x1b/0x27 [crc32c_generic] [<ffffffff81283f3e>] ? crypto_shash_update+0xce/0xf0 [<ffffffffa05d3993>] sctp_endpoint_bh_rcv+0x113/0x280 [sctp] [<ffffffffa05dd4e6>] sctp_inq_push+0x46/0x60 [sctp] [<ffffffffa05ed7a0>] sctp_rcv+0x880/0x910 [sctp] [<ffffffffa05ecb50>] ? sctp_packet_transmit_chunk+0xb0/0xb0 [sctp] [<ffffffffa05ecb70>] ? sctp_csum_update+0x20/0x20 [sctp] [<ffffffff814b05a5>] ? ip_route_input_noref+0x235/0xd30 [<ffffffff81051d6b>] ? ack_ioapic_level+0x7b/0x150 [<ffffffff814b27be>] ip_local_deliver_finish+0xae/0x210 [<ffffffff814b2e15>] ip_local_deliver+0x35/0x90 [<ffffffff814b2a15>] ip_rcv_finish+0xf5/0x370 [<ffffffff814b3128>] ip_rcv+0x2b8/0x3a0 [<ffffffff81474193>] __netif_receive_skb_core+0x763/0xa50 [<ffffffff81476c28>] __netif_receive_skb+0x18/0x60 [<ffffffff81476cb0>] netif_receive_skb_internal+0x40/0xd0 [<ffffffff814776c8>] napi_gro_receive+0xe8/0x120 [<ffffffffa03946aa>] rtl8169_poll+0x2da/0x660 [r8169] [<ffffffff8147896a>] net_rx_action+0x21a/0x360 [<ffffffff81078dc1>] __do_softirq+0xe1/0x2d0 [<ffffffff8107912d>] irq_exit+0xad/0xb0 [<ffffffff8157d158>] do_IRQ+0x58/0xf0 [<ffffffff8157b06d>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810e1218>] ? hrtimer_start+0x18/0x20 [<ffffffffa05d65f9>] ? sctp_transport_destroy_rcu+0x29/0x30 [sctp] [<ffffffff81020c50>] ? mwait_idle+0x60/0xa0 [<ffffffff810216ef>] arch_cpu_idle+0xf/0x20 [<ffffffff810b731c>] cpu_startup_entry+0x3ec/0x480 [<ffffffff8156b365>] rest_init+0x85/0x90 [<ffffffff818eb035>] start_kernel+0x48b/0x4ac [<ffffffff818ea120>] ? early_idt_handlers+0x120/0x120 [<ffffffff818ea339>] x86_64_start_reservations+0x2a/0x2c [<ffffffff818ea49c>] x86_64_start_kernel+0x161/0x184 Code: 90 48 8b 80 b8 00 00 00 48 89 85 70 ff ff ff 48 83 bd 70 ff ff ff 00 0f 85 cd fa ff ff 48 89 df 31 db e8 18 63 e7 e0 48 8b 45 80 <48> 8b 40 20 48 8b 40 30 48 8b 80 68 01 00 00 65 48 ff 40 78 e9 RIP [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp] RSP <ffff880127c037b8> CR2: 0000000000000020 ---[ end trace 5aec7fd2dc983574 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) drm_kms_helper: panic occurred, switching back to text console ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 2c51a97f ] The lockless lookups can return entry that is unlinked. Sometimes they get reference before last neigh_cleanup_and_release, sometimes they do not need reference. Later, any modification attempts may result in the following problems: 1. entry is not destroyed immediately because neigh_update can start the timer for dead entry, eg. on change to NUD_REACHABLE state. As result, entry lives for some time but is invisible and out of control. 2. __neigh_event_send can run in parallel with neigh_destroy while refcnt=0 but if timer is started and expired refcnt can reach 0 for second time leading to second neigh_destroy and possible crash. Thanks to Eric Dumazet and Ying Xue for their work and analyze on the __neigh_event_send change. Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Fixes: a263b309 ("ipv4: Make neigh lookups directly in output packet path.") Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
-
Willem de Bruijn authored
[ Upstream commit 468479e6 ] PACKET_FANOUT_LB computes f->rr_cur such that it is modulo f->num_members. It returns the old value unconditionally, but f->num_members may have changed since the last store. Ensure that the return value is always < num. When modifying the logic, simplify it further by replacing the loop with an unconditional atomic increment. Fixes: dc99f600 ("packet: Add fanout support.") Suggested-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit f98f4514 ] We need to tell compiler it must not read f->num_members multiple times. Otherwise testing if num is not zero is flaky, and we could attempt an invalid divide by 0 in fanout_demux_cpu() Note bug was present in packet_rcv_fanout_hash() and packet_rcv_fanout_lb() but final 3.1 had a simple location after commit 95ec3eb4 ("packet: Add 'cpu' fanout policy.") Fixes: dc99f600 ("packet: Add fanout support.") Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 2dab80a8 ] After the ->set() spinlocks were removed br_stp_set_bridge_priority was left running without any protection when used via sysfs. It can race with port add/del and could result in use-after-free cases and corrupted lists. Tested by running port add/del in a loop with stp enabled while setting priority in a loop, crashes are easily reproducible. The spinlocks around sysfs ->set() were removed in commit: 14f98f25 ("bridge: range check STP parameters") There's also a race condition in the netlink priority support that is fixed by this change, but it was introduced recently and the fixes tag covers it, just in case it's needed the commit is: af615762 ("bridge: add ageing_time, stp_state, priority over netlink") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Fixes: 14f98f25 ("bridge: range check STP parameters") Signed-off-by:
-
Ian Campbell authored
[ Upstream commit 31a41898 ] When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Mark Salyzyn authored
[ Upstream commit b48732e4 ] got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Scott Wood authored
commit 6663a4fa upstream. Commit 59a53afe "powerpc: Don't setup CPUs with bad status" broke ePAPR SMP booting. ePAPR says that CPUs that aren't presently running shall have status of disabled, with enable-method being used to determine whether the CPU can be enabled. Fix by checking for spin-table, which is currently the only supported enable-method. Signed-off-by:
Scott Wood <scottwood@freescale.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by:
-
Anton Blanchard authored
commit ac13282d upstream. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Jonathan Toppins <jtoppins@cumulusnetworks.com> Reviewed-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Acked-by:
Curt Brune <curt@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Thierry Reding authored
commit bd3d5500 upstream. This commit adds an empty of_property_match_string() function for !CONFIG_OF builds. Acked-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Grant Likely authored
commit 7aff0fe3 upstream. Add a helper function for finding the index of a string in a string list property. This helper is useful for bindings that use a separate *-name property for attaching names to tuples in another property such as 'reg' or 'gpios'. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> [jt: dropped changes to files not existing in the 3.2 tree] Signed-off-by:
-
Hans Schillstrom authored
commit 8537de8a upstream. Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by:
"Ryan O'Hara" <rohara@redhat.com> Signed-off-by:
Hans Schillstrom <hans.schillstrom@ericsson.com> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Marcelo Ricardo Leitner authored
commit 2d45a02d upstream. ->auto_asconf_splist is per namespace and mangled by functions like sctp_setsockopt_auto_asconf() which doesn't guarantee any serialization. Also, the call to inet_sk_copy_descendant() was backuping ->auto_asconf_list through the copy but was not honoring ->do_auto_asconf, which could lead to list corruption if it was different between both sockets. This commit thus fixes the list handling by using ->addr_wq_lock spinlock to protect the list. A special handling is done upon socket creation and destruction for that. Error handlig on sctp_init_sock() will never return an error after having initialized asconf, so sctp_destroy_sock() can be called without addrq_wq_lock. The lock now will be take on sctp_close_sock(), before locking the socket, so we don't do it in inverse order compared to sctp_addr_wq_timeout_handler(). Instead of taking the lock on sctp_sock_migrate() for copying and restoring the list values, it's preferred to avoid rewritting it by implementing sctp_copy_descendant(). Issue was found with a test application that kept flipping sysctl default_auto_asconf on and off, but one could trigger it by issuing simultaneous setsockopt() calls on multiple sockets or by creating/destroying sockets fast enough. This is only triggerable locally. Fixes: 9f7d653b ("sctp: Add Auto-ASCONF support (core).") Reported-by:
Ji Jianwen <jiji@redhat.com> Suggested-by:
-
Eric Dumazet authored
commit beb39db5 upstream. We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
-
Ben Hutchings authored
pipe_iov_copy_{from,to}_user() may be tried twice with the same iovec, the first time atomically and the second time not. The second attempt needs to continue from the iovec position, pipe buffer offset and remaining length where the first attempt failed, but currently the pipe buffer offset and remaining length are reset. This will corrupt the piped data (possibly also leading to an information leak between processes) and may also corrupt kernel memory. This was fixed upstream by commits f0d1bec9 ("new helper: copy_page_from_iter()") and 637b58c2 ("switch pipe_read() to copy_page_to_iter()"), but those aren't suitable for stable. This fix for older kernel versions was made by Seth Jennings for RHEL and I have extracted it from their update. CVE-2015-1805 References: https://bugzilla.redhat.com/show_bug.cgi?id=1202855Signed-off-by: -
Steven Rostedt authored
commit 2cf30dc1 upstream. When the following filter is used it causes a warning to trigger: # cd /sys/kernel/debug/tracing # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter -bash: echo: write error: Invalid argument # cat events/ext4/ext4_truncate_exit/filter ((dev==1)blocks==2) ^ parse_error: No error ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990() Modules linked in: bnep lockd grace bluetooth ... CPU: 3 PID: 1223 Comm: bash Tainted: G W 4.1.0-rc3-test+ #450 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0 0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea Call Trace: [<ffffffff816ed4f9>] dump_stack+0x4c/0x6e [<ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0 [<ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80 [<ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81159065>] replace_preds+0x3c5/0x990 [<ffffffff811596b2>] create_filter+0x82/0xb0 [<ffffffff81159944>] apply_event_filter+0xd4/0x180 [<ffffffff81152bbf>] event_filter_write+0x8f/0x120 [<ffffffff811db2a8>] __vfs_write+0x28/0xe0 [<ffffffff811dda43>] ? __sb_start_write+0x53/0xf0 [<ffffffff812e51e0>] ? security_file_permission+0x30/0xc0 [<ffffffff811dc408>] vfs_write+0xb8/0x1b0 [<ffffffff811dc72f>] SyS_write+0x4f/0xb0 [<ffffffff816f5217>] system_call_fastpath+0x12/0x6a ---[ end trace e11028bd95818dcd ]--- Worse yet, reading the error message (the filter again) it says that there was no error, when there clearly was. The issue is that the code that checks the input does not check for balanced ops. That is, having an op between a closed parenthesis and the next token. This would only cause a warning, and fail out before doing any real harm, but it should still not caues a warning, and the error reported should work: # cd /sys/kernel/debug/tracing # echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter -bash: echo: write error: Invalid argument # cat events/ext4/ext4_truncate_exit/filter ((dev==1)blocks==2) ^ parse_error: Meaningless filter expression And give no kernel warning. Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Steven Rostedt <rostedt@goodmis.org> [bwh: Backported to 3.2: drop the check for OP_NOT, which we don't have] Signed-off-by:
-
Wang Long authored
commit 10802932 upstream. The producer should be used producer_fifo as its sched_priority, so correct it. Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.comSigned-off-by:
Wang Long <long.wanglong@huawei.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 1a040eac upstream. Since the addition of sysfs multicast router support if one set multicast_router to "2" more than once, then the port would be added to the hlist every time and could end up linking to itself and thus causing an endless loop for rlist walkers. So to reproduce just do: echo 2 > multicast_router; echo 2 > multicast_router; in a bridge port and let some igmp traffic flow, for me it hangs up in br_multicast_flood(). Fix this by adding a check in br_multicast_add_router() if the port is already linked. The reason this didn't happen before the addition of multicast_router sysfs entries is because there's a !hlist_unhashed check that prevents it. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
James Hogan authored
commit 5f35b9cd upstream. Commit 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c4 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Adam Jiang <jiang.adam@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/10531/Signed-off-by:
-
洪一竹 authored
commit 692dd191 upstream. This adds new icbody type to the list recognized by Elantech PS/2 driver. Signed-off-by:
Sam Hung <sam.hung@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Sam hung authored
commit 810aa091 upstream. This change allows the driver to recognize newer Elantech touchpads. Signed-off-by:
-
Jordan Rife authored
commit ae4bedf0 upstream. Newer elantech touchpads are not recognized by the current driver, since it fails to detect their firmware version number. This prevents more advanced touchpad features from being usable such as two-finger scrolling. This patch allows newer touchpads to be detected and be fully functional. Tested on Sony Vaio SVF13N17PXB. Signed-off-by:
Jordan Rife <jrife0@gmail.com> Signed-off-by:
-
Matt Walker authored
commit 9cb80b96 upstream. Added detection for newer Elantech touchpads, so that kernel doesn't fall-back to default PS/2 driver. Supports touchpads released after ~August 2013. Fixes bug: https://lists.launchpad.net/kernel-packages/msg18481.html Tested on an Acer Aspire S7-392-6302. Signed-off by: Matt Walker <matt.g.d.walker@gmail.com> Signed-off-by:
-
