- 08 Jul, 2018 19 commits
-
-
Stefan Agner authored
commit 9fcf2b3c upstream. The statement always evaluates to true since the struct fields are arrays. This has shown up as a warning when compiling with clang: warning: address of array 'desc->layout.xstride' will always evaluate to 'true' [-Wpointer-bool-conversion] Check for values in the first plane instead. Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.chSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeremy Cline authored
commit 889ad63d upstream. "qxl_bo_unref" may sleep, but calling "qxl_release_map" causes "preempt_disable()" to be called and "preempt_enable()" isn't called until "qxl_release_unmap" is used. Move the call to "qxl_bo_unref" out from in between the two to avoid sleeping from an atomic context. This issue can be demonstrated on a kernel with CONFIG_LOCKDEP=y by creating a VM using QXL, using a desktop environment using Xorg, then moving the cursor on or off a window. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1571128 Fixes: 9428088c ("drm/qxl: reapply cursor after resetting primary") Cc: stable@vger.kernel.org Signed-off-by:
Jeremy Cline <jcline@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180601200532.13619-1-jcline@redhat.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Huang Rui authored
commit a0b2ac29 upstream. It missed vcn.fw_version setting when init vcn microcode, and it will be used to report vcn ucode version via amdgpu_firmware_info sysfs interface. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Rex Zhu authored
commit 08ebb6e9 upstream. 1. fix set vce clocks failed on Cz/St which lead 1s delay when boot up. 2. remove the workaround in vce_v3_0.c Reviewed-by:
Shirish S <shirish.s@amd.com> Signed-off-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
commit 819a23f8 upstream. fix the issue set uvd clock failed on CZ/ST which lead 1s delay when boot up. Reviewed-by:
-
Alexander Potapenko authored
commit 21eff69a upstream. KMSAN reported an infoleak when reading from /dev/vcs*: BUG: KMSAN: kernel-infoleak in vcs_read+0x18ba/0x1cc0 Call Trace: ... kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copy_to_user ./include/linux/uaccess.h:184 vcs_read+0x18ba/0x1cc0 drivers/tty/vt/vc_screen.c:352 __vfs_read+0x1b2/0x9d0 fs/read_write.c:416 vfs_read+0x36c/0x6b0 fs/read_write.c:452 ... Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 __kmalloc+0x13a/0x350 mm/slub.c:3818 kmalloc ./include/linux/slab.h:517 vc_allocate+0x438/0x800 drivers/tty/vt/vt.c:787 con_install+0x8c/0x640 drivers/tty/vt/vt.c:2880 tty_driver_install_tty drivers/tty/tty_io.c:1224 tty_init_dev+0x1b5/0x1020 drivers/tty/tty_io.c:1324 tty_open_by_driver drivers/tty/tty_io.c:1959 tty_open+0x17b4/0x2ed0 drivers/tty/tty_io.c:2007 chrdev_open+0xc25/0xd90 fs/char_dev.c:417 do_dentry_open+0xccc/0x1440 fs/open.c:794 vfs_open+0x1b6/0x2f0 fs/open.c:908 ... Bytes 0-79 of 240 are uninitialized Consistently allocating |vc_screenbuf| with kzalloc() fixes the problem Reported-by: syzbot+17a8efdf800000@syzkaller.appspotmail.com Signed-off-by:
Alexander Potapenko <glider@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit bc6cf366 upstream. Make sure to free all resources associated with the ida on module exit. Fixes: cd6484e1 ("serdev: Introduce new bus for serial attached devices") Cc: stable <stable@vger.kernel.org> # 4.11 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
commit 20dcff43 upstream. After the commit 7d8905d0 ("serial: 8250_pci: Enable device after we check black list") pure serial multi-port cards, such as CH355, got blacklisted and thus not being enumerated anymore. Previously, it seems, blacklisting them was on purpose to shut up pciserial_init_one() about record duplication. So, remove the entries from blacklist in order to get cards enumerated. Fixes: 7d8905d0 ("serial: 8250_pci: Enable device after we check black list") Reported-by:
Matt Turner <mattst88@gmail.com> Cc: Sergej Pupykin <ml@sergej.pp.ru> Cc: Alexandr Petrenko <petrenkoas83@gmail.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-and-Tested-by:
-
Laura Abbott authored
commit 0a2bc003 upstream. The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: syzbot+55b1d9f811650de944c6@syzkaller.appspotmail.com Signed-off-by:
Laura Abbott <labbott@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit ebec3f8f upstream. syzbot is reporting stalls at __process_echoes() [1]. This is because since ldata->echo_commit < ldata->echo_tail becomes true for some reason, the discard loop is serving as almost infinite loop. This patch tries to avoid falling into ldata->echo_commit < ldata->echo_tail situation by making access to echo_* variables more carefully. Since reset_buffer_flags() is called without output_lock held, it should not touch echo_* variables. And omit a call to reset_buffer_flags() from n_tty_open() by using vzalloc(). Since add_echo_byte() is called without output_lock held, it needs memory barrier between storing into echo_buf[] and incrementing echo_head counter. echo_buf() needs corresponding memory barrier before reading echo_buf[]. Lack of handling the possibility of not-yet-stored multi-byte operation might be the reason of falling into ldata->echo_commit < ldata->echo_tail situation, for if I do WARN_ON(ldata->echo_commit == tail + 1) prior to echo_buf(ldata, tail + 1), the WARN_ON() fires. Also, explicitly masking with buffer for the former "while" loop, and use ldata->echo_commit > tail for the latter "while" loop. [1] https://syzkaller.appspot.com/bug?id=17f23b094cd80df750e5b0f8982c521ee6bcbf40Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+108696293d7a21ab688f@syzkaller.appspotmail.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 3d63b7e4 upstream. syzbot is reporting stalls at n_tty_receive_char_special() [1]. This is because comparison is not working as expected since ldata->read_head can change at any moment. Mitigate this by explicitly masking with buffer size when checking condition for "while" loops. [1] https://syzkaller.appspot.com/bug?id=3d7481a346958d9469bebbeb0537d5f056bdd6e8Signed-off-by:
syzbot <syzbot+18df353d7540aa6b5467@syzkaller.appspotmail.com> Fixes: bc5a5e3f ("n_tty: Don't wrap input buffer indices at buffer size") Cc: stable <stable@vger.kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Zhengjun Xing authored
commit d850c165 upstream. commit 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] <IRQ> [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] </IRQ> Fixes: 44a182b9 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <stable@vger.kernel.org> Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
commit 68816e16 upstream. According to UCSI Specification, Connector Change Event only means a change in the Connector Status and Operation Mode fields of the STATUS data structure. So any other change should create another event. Unfortunately on some platforms the firmware acting as PPM (platform policy manager - usually embedded controller firmware) still does not report any other status changes if there is a connector change event. So if the connector power or data role was changed when a device was plugged to the connector, the driver does not get any indication about that. The port will show wrong roles if that happens. To fix the issue, always checking the data and power role together with a connector change event. Fixes: c1b0bc2d ("usb: typec: Add support for UCSI interface") Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Heikki Krogerus authored
commit 1f9f9d16 upstream. This fixes an issue where the driver fails with an error: ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0 On some platforms the UCSI ACPI mailbox SystemMemory Operation Region may be setup before the driver has been loaded. That will lead into the driver failing to map the mailbox region, as it has been already marked as write-back memory. acpi_os_ioremap() for x86 uses ioremap_cache() unconditionally. When the issue happens, the embedded controller has a pending query event for the UCSI notification right after boot-up which causes the operation region to be setup before UCSI driver has been loaded. The fix is to notify acpi core that the driver is about to access memory region which potentially overlaps with an operation region right before mapping it. acpi_release_memory() will check if the memory has already been setup (mapped) by acpi core, and deactivate it (unmap) if it has. The driver is then able to map the memory with ioremap_nocache() and set the memtype to uncached for the region. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Fixes: 8243edf4 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Signed-off-by:
-
Heikki Krogerus authored
commit d2d2e3c4 upstream. Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf4 ("usb: typec: ucsi: Add ACPI driver") Cc: stable@vger.kernel.org Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
William Wu authored
commit 87606759 upstream. The dwc2_get_ls_map() use ttport to reference into the bitmap if we're on a multi_tt hub. But the bitmaps index from 0 to (hub->maxchild - 1), while the ttport index from 1 to hub->maxchild. This will cause invalid memory access when the number of ttport is hub->maxchild. Without this patch, I can easily meet a Kernel panic issue if connect a low-speed USB mouse with the max port of FE2.1 multi-tt hub (1a40:0201) on rk3288 platform. Fixes: 9f9f09b0 ("usb: dwc2: host: Totally redo the microframe scheduler") Cc: <stable@vger.kernel.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by: Minas Harutyunyan hminas@synopsys.com> Signed-off-by:
William Wu <william.wu@rock-chips.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Karoly Pados authored
commit 2f839823 upstream. Silicon Labs defines alternative VID/PID pairs for some chips that when used will automatically install drivers for Windows users without manual intervention. Unfortunately, these IDs are not recognized by the Linux module, so using these IDs improves user experience on one platform but degrades it on Linux. This patch addresses this problem. Signed-off-by:
Karoly Pados <pados@pados.hu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 24160628 upstream. Add device ids for CESINEL products. Reported-by:
Carlos Barcala Lara <cabl@cesinel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Houston Yaroschoff authored
commit 4a762569 upstream. Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by:
Houston Yaroschoff <hstn@4ever3.net> Cc: stable <stable@vger.kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
- 03 Jul, 2018 21 commits
-
-
Greg Kroah-Hartman authored
-
Mathias Nyman authored
commit 44a182b9 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe4 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Mike Snitzer authored
commit a685557f upstream. Discards issued to a DM thin device can complete to userspace (via fstrim) _before_ the metadata changes associated with the discards is reflected in the thinp superblock (e.g. free blocks). As such, if a user constructs a test that loops repeatedly over these steps, block allocation can fail due to discards not having completed yet: 1) fill thin device via filesystem file 2) remove file 3) fstrim From initial report, here: https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html "The root cause of this issue is that dm-thin will first remove mapping and increase corresponding blocks' reference count to prevent them from being reused before DISCARD bios get processed by the underlying layers. However. increasing blocks' reference count could also increase the nr_allocated_this_transaction in struct sm_disk which makes smd->old_ll.nr_allocated + smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks. In this case, alloc_data_block() will never commit metadata to reset the begin pointer of struct sm_disk, because sm_disk_get_nr_free() always return an underflow value." While there is room for improvement to the space-map accounting that thinp is making use of: the reality is this test is inherently racey and will result in the previous iteration's fstrim's discard(s) completing vs concurrent block allocation, via dd, in the next iteration of the loop. No amount of space map accounting improvements will be able to allow user's to use a block before a discard of that block has completed. So the best we can really do is allow DM thinp to gracefully handle such aggressive use of all the pool's data by degrading the pool into out-of-data-space (OODS) mode. We _should_ get that behaviour already (if space map accounting didn't falsely cause alloc_data_block() to believe free space was available).. but short of that we handle the current reality that dm_pool_alloc_data_block() can return -ENOSPC. Reported-by:
Dennis Yang <dennisyang@qnap.com> Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 2d0b2d64 upstream. This patch avoids that lockdep reports the following: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc1 #62 Not tainted ------------------------------------------------------ kswapd0/84 is trying to acquire lock: 00000000c313516d (&xfs_nondir_ilock_class){++++}, at: xfs_free_eofblocks+0xa2/0x1e0 but task is already holding lock: 00000000591c83ae (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}: kmem_cache_alloc+0x2c/0x2b0 radix_tree_node_alloc.constprop.19+0x3d/0xc0 __radix_tree_create+0x161/0x1c0 __radix_tree_insert+0x45/0x210 dmz_map+0x245/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 mpage_readpages+0x19e/0x1f0 read_pages+0x6d/0x1b0 __do_page_cache_readahead+0x21b/0x2d0 force_page_cache_readahead+0xc4/0x100 generic_file_read_iter+0x7c6/0xd20 __vfs_read+0x102/0x180 vfs_read+0x9b/0x140 ksys_read+0x55/0xc0 do_syscall_64+0x5a/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&dmz->chunk_lock){+.+.}: dmz_map+0x133/0x2d0 [dm_zoned] __map_bio+0x40/0x260 __split_and_process_non_flush+0x116/0x220 __split_and_process_bio+0x81/0x180 __dm_make_request.isra.32+0x5a/0x100 generic_make_request+0x36e/0x690 submit_bio+0x6c/0x140 _xfs_buf_ioapply+0x31c/0x590 xfs_buf_submit_wait+0x73/0x520 xfs_buf_read_map+0x134/0x2f0 xfs_trans_read_buf_map+0xc3/0x580 xfs_read_agf+0xa5/0x1e0 xfs_alloc_read_agf+0x59/0x2b0 xfs_alloc_pagf_init+0x27/0x60 xfs_bmap_longest_free_extent+0x43/0xb0 xfs_bmap_btalloc_nullfb+0x7f/0xf0 xfs_bmap_btalloc+0x428/0x7c0 xfs_bmapi_write+0x598/0xcc0 xfs_iomap_write_allocate+0x15a/0x330 xfs_map_blocks+0x1cf/0x3f0 xfs_do_writepage+0x15f/0x7b0 write_cache_pages+0x1ca/0x540 xfs_vm_writepages+0x65/0xa0 do_writepages+0x48/0xf0 __writeback_single_inode+0x58/0x730 writeback_sb_inodes+0x249/0x5c0 wb_writeback+0x11e/0x550 wb_workfn+0xa3/0x670 process_one_work+0x228/0x670 worker_thread+0x3c/0x390 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 -> #0 (&xfs_nondir_ilock_class){++++}: down_read_nested+0x43/0x70 xfs_free_eofblocks+0xa2/0x1e0 xfs_fs_destroy_inode+0xac/0x270 dispose_list+0x51/0x80 prune_icache_sb+0x52/0x70 super_cache_scan+0x127/0x1a0 shrink_slab.part.47+0x1bd/0x590 shrink_node+0x3b5/0x470 balance_pgdat+0x158/0x3b0 kswapd+0x1ba/0x600 kthread+0x11c/0x140 ret_from_fork+0x3a/0x50 other info that might help us debug this: Chain exists of: &xfs_nondir_ilock_class --> &dmz->chunk_lock --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&dmz->chunk_lock); lock(fs_reclaim); lock(&xfs_nondir_ilock_class);
-
Kirill A. Shutemov authored
commit cfe19577 upstream. Open-coded page table entry checks don't work correctly when we fold the page table level at runtime. pgd_present() on 4-level paging machine always returns true, but open-coded version of the check may return false-negative result and we silently skip the rest of the loop body in efi_call_phys_epilog(). Replace open-coded checks with proper helpers. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v4.12+ Fixes: 94133e46 ("x86/efi: Correct EFI identity mapping under 'efi=old_map' when KASLR is enabled") Link: http://lkml.kernel.org/r/20180625120852.18300-1-kirill.shutemov@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Bart Van Assche authored
commit 297ba57d upstream. This patch avoids that removing a path controlled by the dm-mpath driver while mkfs is running triggers the following kernel bug: kernel BUG at block/blk-core.c:3347! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2 RIP: 0010:blk_end_request_all+0x68/0x70 Call Trace: <IRQ> dm_softirq_done+0x326/0x3d0 [dm_mod] blk_done_softirq+0x19b/0x1e0 __do_softirq+0x128/0x60d irq_exit+0x100/0x110 smp_call_function_single_interrupt+0x90/0x330 call_function_single_interrupt+0xf/0x20 </IRQ> Fixes: f9d03f96 ("block: improve handling of the magic discard payload") Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Keith Busch authored
commit 15bfd21f upstream. A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Mikulas Patocka authored
commit d50d82fa upstream. In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (commit 21bb1327: "dm bufio: remove code that merges slab caches") - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggered: Buffer I/O error on dev dm-0, logical block 1572848, async page read device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 device-mapper: thin: 253:1: aborting current metadata transaction sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 Workqueue: dm-thin do_worker [dm_thin_pool] Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_create_dir_ns+0x77/0x80 kobject_add_internal+0xba/0x2e0 kobject_init_and_add+0x70/0xb0 sysfs_slab_add+0xb1/0x250 __kmem_cache_create+0x116/0x150 create_cache+0xd9/0x1f0 kmem_cache_create_usercopy+0x1c1/0x250 kmem_cache_create+0x18/0x20 dm_bufio_client_create+0x1ae/0x410 [dm_bufio] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] metadata_operation_failed+0x59/0x100 [dm_thin_pool] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] process_cell+0x2a3/0x550 [dm_thin_pool] do_worker+0x28d/0x8f0 [dm_thin_pool] process_one_work+0x171/0x370 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
Mikulas Patocka <mpatocka@redhat.com> Reported-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hui Wang authored
commit e41fc8c5 upstream. We have 3 more Lenovo machines, they all have 2 front mics on them, so they need the fixup to change the location for one of two mics. Among these 3 Lenovo machines, one of them has the same pin cfg as the machine with subid 0x17aa3138, so use the pin cfg table to apply fixup for them. The rest machines don't share the same pin cfg, so far use the subid to apply fixup for them. Fixes: a3dafb22 ("ALSA: hda/realtek - adjust the location of one mic") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 275ec0cb upstream. Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270 for the correct pin configs. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit d5a6cabf upstream. Some Lenovo laptops, e.g. Lenovo P50, showed the pop noise at resume or runtime resume. It turned out to be reduced by applying alc_no_shutup() just like TPT440 quirk does. Since there are many Lenovo models showing the same behavior, put this workaround in ALC269_FIXUP_THINKPAD_ACPI entry so that it's applied commonly to all such Lenovo machines. Reported-by:
Hans de Goede <hdegoede@redhat.com> Tested-by:
Benjamin Berg <bberg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit b41f794f upstream. The kernel may spew a WARNING about UBSAN undefined behavior at handling ALSA timer ioctl SNDRV_TIMER_IOCTL_NEXT_DEVICE: UBSAN: Undefined behaviour in sound/core/timer.c:1524:19 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_timer_user_next_device sound/core/timer.c:1524 [inline] __snd_timer_user_ioctl+0x204d/0x2520 sound/core/timer.c:1939 snd_timer_user_ioctl+0x67/0x95 sound/core/timer.c:1994 .... It happens only when a value with INT_MAX is passed, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200213Reported-and-tested-by:
Team OWL337 <icytxw@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
??? authored
commit e0ae2519 upstream. Some touchpad has middle key and it will be indicated in bit 2 of packet[0]. We need to fix V4 formation's byte mask to prevent error decoding. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Aaron Ma authored
commit 24bb555e upstream. PNPID is better way to identify the type of touchpads. Enable middle button support on 2 types of touchpads on Lenovo P52. Cc: stable@vger.kernel.org Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 50fc7b61 upstream. Commit 40f7090b ("Input: elan_i2c_smbus - fix corrupted stack") fixed most of the functions using i2c_smbus_read_block_data() to allocate a buffer with the maximum block size. However three functions were left unchanged: * In elan_smbus_initialize(), increase the buffer size in the same way. * In elan_smbus_calibrate_result(), the buffer is provided by the caller (calibrate_store()), so introduce a bounce buffer. Also name the result buffer size. * In elan_smbus_get_report(), the buffer is provided by the caller but happens to be the right length. Add a compile-time assertion to ensure this remains the case. Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Reviewed-by:
-
Enno Boland authored
commit dd6bee81 upstream. This fixes using the controller with SDL2. SDL2 has a naive algorithm to apply the correct settings to a controller. For X-Box compatible controllers it expects that the controller name contains a variation of a 'XBOX'-string. This patch changes the identifier to contain "X-Box" as substring. Tested with Steam and C-Dogs-SDL which both detect the controller properly after adding this patch. Fixes: c1ba0839 ("Input: xpad - add GPD Win 2 Controller USB IDs") Cc: stable@vger.kernel.org Signed-off-by:
Enno Boland <gottox@voidlinux.eu> Signed-off-by:
-
Jan Kara authored
commit fa65653e upstream. Detect when a directory entry is (possibly partially) beyond directory size and return EIO in that case since it means the filesystem is corrupted. Otherwise directory operations can further corrupt the directory and possibly also oops the kernel. CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> CC: stable@vger.kernel.org Reported-and-tested-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Boris Ostrovsky authored
commit eef04c7b upstream. Commit 910f8bef ("xen/pirq: fix error path cleanup when binding MSIs") fixed a couple of errors in error cleanup path of xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to __unbind_from_irq() with an unbound irq, which would result in triggering the BUG_ON there. Since there is really no reason for the BUG_ON (xen_free_irq() can operate on unbound irqs) we can remove it. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Dan Williams authored
commit 2bdce744 upstream. Hussam reports: I was poking around and for no real reason, I did cat /dev/mem and strings /dev/mem. Then I saw the following warning in dmesg. I saved it and rebooted immediately. memremap attempted on mixed range 0x000000000009c000 size: 0x1000 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11810 at kernel/memremap.c:98 memremap+0x104/0x170 [..] Call Trace: xlate_dev_mem_ptr+0x25/0x40 read_mem+0x89/0x1a0 __vfs_read+0x36/0x170 The memremap() implementation checks for attempts to remap System RAM with MEMREMAP_WB and instead redirects those mapping attempts to the linear map. However, that only works if the physical address range being remapped is page aligned. In low memory we have situations like the following: 00000000-00000fff : Reserved 00001000-0009fbff : System RAM 0009fc00-0009ffff : Reserved ...where System RAM intersects Reserved ranges on a sub-page page granularity. Given that devmem_is_allowed() special cases any attempt to map System RAM in the first 1MB of memory, replace page_is_ram() with the more precise region_intersects() to trap attempts to map disallowed ranges. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199999 Link: http://lkml.kernel.org/r/152856436164.18127.2847888121707136898.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 92281dee ("arch: introduce memremap()") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Hussam Al-Tayeb <me@hussam.eu.org> Tested-by:
-
Jia He authored
commit 1105a2fc upstream. In our armv8a server(QDF2400), I noticed lots of WARN_ON caused by PAGE_SIZE unaligned for rmap_item->address under memory pressure tests(start 20 guests and run memhog in the host). WARNING: CPU: 4 PID: 4641 at virt/kvm/arm/mmu.c:1826 kvm_age_hva_handler+0xc0/0xc8 CPU: 4 PID: 4641 Comm: memhog Tainted: G W 4.17.0-rc3+ #8 Call trace: kvm_age_hva_handler+0xc0/0xc8 handle_hva_to_gpa+0xa8/0xe0 kvm_age_hva+0x4c/0xe8 kvm_mmu_notifier_clear_flush_young+0x54/0x98 __mmu_notifier_clear_flush_young+0x6c/0xa0 page_referenced_one+0x154/0x1d8 rmap_walk_ksm+0x12c/0x1d0 rmap_walk+0x94/0xa0 page_referenced+0x194/0x1b0 shrink_page_list+0x674/0xc28 shrink_inactive_list+0x26c/0x5b8 shrink_node_memcg+0x35c/0x620 shrink_node+0x100/0x430 do_try_to_free_pages+0xe0/0x3a8 try_to_free_pages+0xe4/0x230 __alloc_pages_nodemask+0x564/0xdc0 alloc_pages_vma+0x90/0x228 do_anonymous_page+0xc8/0x4d0 __handle_mm_fault+0x4a0/0x508 handle_mm_fault+0xf8/0x1b0 do_page_fault+0x218/0x4b8 do_translation_fault+0x90/0xa0 do_mem_abort+0x68/0xf0 el0_da+0x24/0x28 In rmap_walk_ksm, the rmap_item->address might still have the STABLE_FLAG, then the start and end in handle_hva_to_gpa might not be PAGE_SIZE aligned. Thus it will cause exceptions in handle_hva_to_gpa on arm64. This patch fixes it by ignoring (not removing) the low bits of address when doing rmap_walk_ksm. IMO, it should be backported to stable tree. the storm of WARN_ONs is very easy for me to reproduce. More than that, I watched a panic (not reproducible) as follows: page:ffff7fe003742d80 count:-4871 mapcount:-2126053375 mapping: (null) index:0x0 flags: 0x1fffc00000000000() raw: 1fffc00000000000 0000000000000000 0000000000000000 ffffecf981470000 raw: dead000000000100 dead000000000200 ffff8017c001c000 0000000000000000 page dumped because: nonzero _refcount CPU: 29 PID: 18323 Comm: qemu-kvm Tainted: G W 4.14.15-5.hxt.aarch64 #1 Hardware name: <snip for confidential issues> Call trace: dump_backtrace+0x0/0x22c show_stack+0x24/0x2c dump_stack+0x8c/0xb0 bad_page+0xf4/0x154 free_pages_check_bad+0x90/0x9c free_pcppages_bulk+0x464/0x518 free_hot_cold_page+0x22c/0x300 __put_page+0x54/0x60 unmap_stage2_range+0x170/0x2b4 kvm_unmap_hva_handler+0x30/0x40 handle_hva_to_gpa+0xb0/0xec kvm_unmap_hva_range+0x5c/0xd0 I even injected a fault on purpose in kvm_unmap_hva_range by seting size=size-0x200, the call trace is similar as above. So I thought the panic is similarly caused by the root cause of WARN_ON. Andrea said: : It looks a straightforward safe fix, on x86 hva_to_gfn_memslot would : zap those bits and hide the misalignment caused by the low metadata : bits being erroneously left set in the address, but the arm code : notices when that's the last page in the memslot and the hva_end is : getting aligned and the size is below one page. : : I think the problem triggers in the addr += PAGE_SIZE of : unmap_stage2_ptes that never matches end because end is aligned but : addr is not. : : } while (pte++, addr += PAGE_SIZE, addr != end); : : x86 again only works on hva_start/hva_end after converting it to : gfn_start/end and that being in pfn units the bits are zapped before : they risk to cause trouble. Jia He said: : I've tested by myself in arm64 server (QDF2400,46 cpus,96G mem) Without : this patch, the WARN_ON is very easy for reproducing. After this patch, I : have run the same benchmarch for a whole day without any WARN_ONs Link: http://lkml.kernel.org/r/1525403506-6750-1-git-send-email-hejianet@gmail.comSigned-off-by:
Jia He <jia.he@hxt-semitech.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
Jia He <hejianet@gmail.com> Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dongsheng Yang authored
commit 23edca86 upstream. There is a problem if we are going to unmap a rbd device and the watch_dwork is going to queue delayed work for watch: unmap Thread watch Thread timer do_rbd_remove cancel_tasks_sync(rbd_dev) queue_delayed_work for watch destroy_workqueue(rbd_dev->task_wq) drain_workqueue(wq) destroy other resources in wq call_timer_fn __queue_work() Then the delayed work escape the cancel_tasks_sync() and destroy_workqueue() and we will get an user-after-free call trace: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Modules linked in: CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 4.17.0-rc6+ #13 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__queue_work+0x6a/0x3b0 RSP: 0018:ffff9427df1c3e90 EFLAGS: 00010086 RAX: ffff9427deca8400 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff9427deca8400 RSI: ffff9427df1c3e50 RDI: 0000000000000000 RBP: ffff942783e39e00 R08: ffff9427deca8400 R09: ffff9427df1c3f00 R10: 0000000000000004 R11: 0000000000000005 R12: ffff9427cfb85970 R13: 0000000000002000 R14: 000000000001eca0 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff9427df1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000004c900a005 CR4: 00000000000206e0 Call Trace: <IRQ> ? __queue_work+0x3b0/0x3b0 call_timer_fn+0x2d/0x130 run_timer_softirq+0x16e/0x430 ? tick_sched_timer+0x37/0x70 __do_softirq+0xd2/0x280 irq_exit+0xd5/0xe0 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 [ Move rbd_dev->watch_dwork cancellation so that rbd_reregister_watch() either bails out early because the watch is UNREGISTERED at that point or just gets cancelled. ] Cc: stable@vger.kernel.org Fixes: 99d16943 ("rbd: retry watch re-registration periodically") Signed-off-by:
Dongsheng Yang <dongsheng.yang@easystack.cn> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
