- 23 Jan, 2017 6 commits
-
-
James Simmons authored
Change lnet_handle_wire_t from typedef to proper structure. Signed-off-by:
James Simmons <uja.ornl@yahoo.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142 Reviewed-on: https://review.whamcloud.com/24566Reviewed-by:
Doug Oucharek <doug.s.oucharek@intel.com> Reviewed-by:
Olaf Weber <olaf@sgi.com> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcos Paulo de Souza authored
Change uint32_t to u32, solved the issue reported by checkpatch.pl: CHECK: Prefer kernel type 'u32' over 'uint32_t' + uint32_t *format, uint32_t *rate, u8 *channels, CHECK: Prefer kernel type 'u32' over 'uint32_t' + uint32_t format, uint32_t rate, u8 channels, Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by:
Mark Greer <mgreer@animalcreek.com> Acked-by:
Vaibhav Agarwal <vaibhav.sr@gmail.com> Signed-off-by:
-
Derek Robson authored
Fixed comparison, moved the constant to the right side of the test Found using checkpatch Signed-off-by:
Derek Robson <robsonde@gmail.com> Signed-off-by:
-
simran singhal authored
This patch fixes the checkpatch issue by adding space around '='. Signed-off-by:
simran singhal <singhalsimran0@gmail.com> Signed-off-by:
-
Linus Walleij authored
commit 76222772 "iio: accel: st_accel: handle deprecated bindings" attempted to be smart and let users use the old I2C driver and the new SPI driver, or the old SPI driver and the new I2C driver in combination for the LIS3LV02, and put the restrictions on the I2C and SPI subdrivers not not be combined with the old subdrivers. This doesn't work since the IIO ST accel top-level component selects the I2C and SPI subdrivers, resulting in the following Kconfig noise: warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_I2C_3AXIS which has unmet direct dependencies (IIO && !SENSORS_LIS3_I2C && IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_I2C) warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_SPI_3AXIS which has unmet direct dependencies (IIO && !SENSORS_LIS3_SPI && IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_SPI) (...) This fixes the issue by putting the dependencies directly in the top-level component instead, so that it never gets to select its unselectable subcomponent. Fixes: 76222772 ("iio: accel: st_accel: handle deprecated bindings") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iioGreg Kroah-Hartman authored
Jonathan writes: Second round of IIO new device support, cleanups and features for the 4.11 cycle New device support: * lsm6dsx imu - new driver and bindings. * max11100 adc - new driver and bindings. * tlc4541 - new driver * tmp007 thermopile - new driver. Core * in kernel interfaces - pass through raw values if no scaling provided and a processed value is requested. * trigger - close a race condition in acquiring trigger reference. - constify device_type structures. - rework the viio_trigger_alloc function to be much neater and easier to read. - free trigger resources correctly on some error paths. Avoids putting a module we don't have. Documentation * ABI - specify a unit for proximity measurements. Cleanups and features * ads1015 - constify iio_info structure. * ads7950 cleanups following merge in previous pull - Add device tree bindings - Drop the ti prefix from the module name in common with other drivers. - Change regulator name to vref to match datasheet and other drivers. * ak8974 - remove a redundant zero timeout check. * bmi160 - use variable names for sizeof instead of types. * cm3605 - mark PM functions as __maybe_unused to avoid a build warning. * isl29028 (on it's way towards moving out of staging). - alignment fixes and newline improvements. - combine proxim_get and read_proxim for simpler code. - drop unused ISL29028_DEV_ATTR macro - move some error logging into functions to cut out repitition. - make error messages more consistent. - tidy up some brackets. - drop the enable flag that nothing uses. - only set proximity rate and ALS scale when relevant channel type is enabled. - runtime pm support. * lsm6dsx - fix wrong values for gyro sensitivitiy. * mag3110 - claim direct mode during sysfs reads to avoid a race condition. * max1363 - export OF device table IDs as module aliases. * max30100 - use msleep for long uncritical delays. * mcp4531 - export OF device table as module aliases. * ms5611 - claim direct mode during sysfs reads to avoid a race condition. * opt3001 - export OF device table as module aliases. * sx9500 - claim direct mode during oversampling changes to avoid a race condition.
-
- 22 Jan, 2017 27 commits
-
-
Alison Schofield authored
These stand-alone trigger drivers were using iio_trigger_put() where they should have been using iio_trigger_free(). The iio_trigger_put() adds a module_put which is bad since they never did a module_get. In the sysfs driver, module_get/put's are used as triggers are added & removed. This extra module_put() occurs on an error path in the probe routine (probably rare). In the bfin-timer & interrupt trigger drivers, the module resources are not explicitly managed, so it's doing a put on something that was never get'd. It occurs on the probe error path and on the remove path (not so rare). Tested with the sysfs trigger driver. The bfin & interrupt drivers were build tested & inspected only. Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Dan Carpenter authored
1) Reverse the test for kmalloc() failure so we can pull everything back one tab. 2) Use gotos for unwinding. 3) Some of the extra line breaks for the 80 character limit are no longer needed so we can remove them. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bhumika Goyal authored
Declare iio_info structures as const as they are only stored in the info field of a iio_dev structure. This field is of type const, so iio_info structures having similar properties can be made const too. File size before: text data bss dec hex filename 6944 792 0 7736 1e38 drivers/iio/adc/ti-ads1015.o File size after: text data bss dec hex filename 7264 472 0 7736 1e38 drivers/iio/adc/ti-ads1015.o Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Declare device_type structure as const as it is only stored in the type field of a device structure. This field is of type const, so add const to declaration of device_type structure. File size before: text data bss dec hex filename 5389 208 48 5645 160d iio/industrialio-trigger.o File size after: text data bss dec hex filename 5453 176 48 5677 162d iio/industrialio-trigger.o Signed-off-by:
-
Alison Schofield authored
In iio_trigger_write_current() we find the trigger we want while holding mutex on the list of triggers, but we don't actually do a get on it while holding mutex. We wait until further validations are completed and we're sure it's the one we want. Race condition is that it could be freed by the time we do the get. Solution is to grab the trigger (iio_trigger_get) as soon as we find it while holding mutex on the list of triggers. If later we decide it's not the right one, put it back. (iio_trigger_put). Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
-
Brian Masney authored
This patch adds runtime power management support to the isl29028 driver. It defaults to powering off the device after two seconds of inactivity. isl29028_chip_init_and_power_on() currently only zeros the CONFIGURE register on the chip, which will cause the chip to turn off. This patch also renames that function to isl29028_clear_configure_reg() since it is now used in several places. Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
-
Brian Masney authored
isl29028_chip_init_and_power_on() calls isl29028_set_als_scale() and this is not needed until the user actually needs to take a reading from the ALS/IR sensor. This patch moves the isl29028_set_als_scale() call from isl29028_chip_init_and_power_on() to isl29028_set_als_ir_mode(). This sets the stage for faster resume times from runtime power management if the user is only querying the proximity sensor. Signed-off-by:
-
Brian Masney authored
isl29028_chip_init_and_power_on() calls isl29028_set_proxim_sampling() and this is not needed until the user actually needs to take a proximity reading. This patch moves the isl29028_set_proxim_sampling() call from isl29028_chip_init_and_power_on() to isl29028_enable_proximity(). This sets the stage for faster resume times from the runtime power management if the user is only querying the ALS/IR sensor. Signed-off-by:
-
Brian Masney authored
isl29028_enable_proximity() has a boolean argument named enable. This function is only called once and the enable flag is set to true in that call. This patch removes the enable parameter from that function. Signed-off-by:
-
Brian Masney authored
isl29028_write_raw() contains unnecessary parenthesis when checking to see if the passed in lux scale is valid. This patch removes the unnecessary parenthesis. Signed-off-by:
-
Brian Masney authored
If the call to devm_iio_device_alloc() fails, then isl29028_probe() logs a message saying that memory cannot be allocated. The user's system most likely has larger issues at this point. This patch removes that error message since the error code is passed on and the message is not necessary. Signed-off-by:
-
Brian Masney authored
If the call to isl29028_chip_init_and_power_on() in isl29028_probe() fails, then isl29028_probe() will log an error message. All of the error paths in that call path already have error logging in place. This patch removes the unnecessary logging. Signed-off-by:
-
Brian Masney authored
The wording and style of the different error messages was not consistent. This patch makes the wording and style consistent throughout the driver. Signed-off-by:
-
Brian Masney authored
When isl29028_set_als_scale() fails, it was up to both callers to log the failure message. This patch moves the logging into isl29028_set_als_scale() to reduce the overall amount of code in the driver. Signed-off-by:
-
Brian Masney authored
When isl29028_set_proxim_sampling() fails, it was up to both callers to log the failure message. This patch moves the logging into isl29028_set_proxim_sampling() to reduce the overall amount of code in the driver. Signed-off-by:
-
Brian Masney authored
The #define ISL29028_DEV_ATTR was not used so this patch removes the unnecessary code. Signed-off-by:
-
Brian Masney authored
Add and remove newlines to improve code readability in preparation for moving the driver out of staging. Signed-off-by:
-
Brian Masney authored
The alignment of the variables in the struct isl29028_chip is not consistent. This changes all of the variables to use consistent alignment to improve the code readability. Signed-off-by:
-
Brian Masney authored
isl29028_proxim_get() checks to see if the promixity needs to be enabled on the chip and then calls isl29028_read_proxim(). There are no other callers of isl29028_read_proxim(). The naming between these two functions can be confusing so this patch combines the two to avoid the confusion. Signed-off-by:
-
Brian Masney authored
Two separate calls to regmap_update_bits() in isl29028_set_als_scale() and isl29028_set_als_ir_mode() did not have their function arguments on the next line aligned correctly to the open parenthesis. This patch corrects the alignment. Signed-off-by:
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by:
-
Javier Martinez Canillas authored
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the device was registered via OF, this means that exporting the OF device ID table device aliases in the module is not needed. But in order to change how the core reports modaliases to user-space, it's better to export it. Signed-off-by:
-
Nicholas Mc Guire authored
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 35ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Fixes: commit 4d33615d ("iio: light: add MAX30100 oximeter driver support") Link: http://lkml.org/lkml/2017/1/11/377Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Phil Reid authored
This adds TI's tlc4541 16-bit ADC driver. Which is a single channel ADC. Supports raw and trigger buffer access. Also supports the tlc3541 14-bit device, which has not been tested. Implementation of the tlc3541 is fairly straight forward thou. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Phil Reid <preid@electromag.com.au> Signed-off-by:
-
Jacopo Mondi authored
Add device tree bindings documentation for Maxim MAX11100 single-channel ADC Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by:
-
- 21 Jan, 2017 6 commits
-
-
Jacopo Mondi authored
Add iio driver for Maxim MAX11100 single-channel ADC. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
Alison Schofield authored
Replace the types with the actual variable names when using the sizeof() operator. This is kernel preferred style as it's more obvious that it is correct. Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_PM_SLEEP is disabled, we get a harmless warning drivers/iio/light/cm3605.c:292:12: error: 'cm3605_pm_resume' defined but not used [-Werror=unused-function] drivers/iio/light/cm3605.c:281:12: error: 'cm3605_pm_suspend' defined but not used [-Werror=unused-function] Marking the functions as possibly unused avoids the warning without needing to add an #ifdef. Fixes: 8afa505c ("iio: light: add driver for Capella CM3605") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alison Schofield authored
Driver was checking for direct mode before changing oversampling ratios, but was not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode while the oversampling ratios are being updated. Continue to use the drivers private state lock to protect against conflicting direct mode access of the state data. Signed-off-by:
-
Alison Schofield authored
Driver was checking for direct mode but not locking it. Use the claim/release helper functions to guarantee the device stays in direct mode during raw reads of proximity data. Signed-off-by:
Vlad Dogaru <ddvlad@gmail.com> Signed-off-by:
-
Alison Schofield authored
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw writes. Signed-off-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
-
- 20 Jan, 2017 1 commit
-
-
Greg Kroah-Hartman authored
The addition of Garmin put it in the incorrect place. This fixes that issue. Reported-by:
-
