- 25 Sep, 2023 38 commits
-
-
Robin Murphy authored
The current checks for the __IOMMU_DOMAIN_PAGING capability seem a bit stifled, since it is quite likely now that a non-paging domain won't have a pgsize_bitmap and/or mapping ops, and thus get caught by the earlier condition anyway. Swap them around to test the more fundamental condition first, then we can reasonably also upgrade the other to a WARN_ON, since if a driver does ever expose a paging domain without the means to actually page, it's clearly very broken. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/524db1ec0139c964d26928a6a264945aa66d010c.1694525662.git.robin.murphy@arm.comSigned-off-by:
Joerg Roedel <jroedel@suse.de>
-
Robin Murphy authored
With everyone now implementing the new interfaces, clean up the last remnants of the old map/unmap ops and simplify the calling logic again. Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/d2afdf13b2fbf537713c3ec642dfd49d16dd9e6a.1694525662.git.robin.murphy@arm.comSigned-off-by:
-
Robin Murphy authored
Trivially update map/unmap to the new interface, which is quite happy for drivers to still process just one page per call. Signed-off-by:
-
Robin Murphy authored
Trivially update map/unmap to the new interface, which is quite happy for drivers to still process just one page per call. Signed-off-by:
-
Robin Murphy authored
Trivially update map/unmap to the new interface, which is quite happy for drivers to still process just one page per call. Signed-off-by:
-
Robin Murphy authored
Trivially update map/unmap to the new interface, which is quite happy for drivers to still process just one page per call. Signed-off-by:
-
Robin Murphy authored
Trivially update map/unmap to the new interface, which is quite happy for drivers to still process just one page per call. Signed-off-by:
-
Jason Gunthorpe authored
Use the new helper. For some reason omap will probe its driver even if it doesn't load an iommu driver. Keep this working by keeping a bool to track if the iommu driver was started. Signed-off-by:
-
Jason Gunthorpe authored
Use the new helper. This driver is kind of weird since in ARM mode it pretends it has per-device groups, but ARM64 mode does not. Signed-off-by:
-
Jason Gunthorpe authored
Use the new helper. Signed-off-by:
-
Jason Gunthorpe authored
Use the new helper. Signed-off-by:
-
Jason Gunthorpe authored
Use the new helper. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/3-v1-c869a95191f2+5e8-iommu_single_grp_jgg@nvidia.comSigned-off-by:
-
Jason Gunthorpe authored
This implements the common pattern seen in drivers of a single iommu_group for the entire iommu driver instance. Implement this in core code so the drivers that want this can select it from their ops. Reviewed-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Kevin Tian <kevin.tian@intel.com> Signed-off-by:
-
Jason Gunthorpe authored
Several functions obtain the group reference and then release it before returning. This gives the impression that the refcount is protecting something for the duration of the function. In truth all of these functions are called in places that know a device driver is probed to the device and our locking rules already require that dev->iommu_group cannot change while a driver is attached to the struct device. If this was not the case then this code is already at risk of triggering UAF as it is racy if the dev->iommu_group is concurrently going to NULL/free. refcount debugging will throw a WARN if kobject_get() is called on a 0 refcount object to highlight the bug. Remove the confusing refcounting and leave behind a comment about the restriction. Reviewed-by:
-
Jason Gunthorpe authored
These drivers don't support IOMMU_DOMAIN_DMA, so this commit effectively allows them to support that mode. The prior work to require default_domains makes this safe because every one of these drivers is either compilation incompatible with dma-iommu.c, or already establishing a default_domain. In both cases alloc_domain() will never be called with IOMMU_DOMAIN_DMA for these drivers so it is safe to drop the test. Removing these tests clarifies that the domain allocation path is only about the functionality of a paging domain and has nothing to do with policy of how the paging domain is used for UNMANAGED/DMA/DMA_FQ. Tested-by:
Niklas Schnelle <schnelle@linux.ibm.com> Tested-by:
Steven Price <steven.price@arm.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Nicolin Chen <nicolinc@nvidia.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
These drivers are all trivially converted since the function is only called if the domain type is going to be IOMMU_DOMAIN_UNMANAGED/DMA. Tested-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
-
Jason Gunthorpe authored
This callback requests the driver to create only a __IOMMU_DOMAIN_PAGING domain, so it saves a few lines in a lot of drivers needlessly checking the type. More critically, this allows us to sweep out all the IOMMU_DOMAIN_UNMANAGED and IOMMU_DOMAIN_DMA checks from a lot of the drivers, simplifying what is going on in the code and ultimately removing the now-unused special cases in drivers where they did not support IOMMU_DOMAIN_DMA. domain_alloc_paging() should return a struct iommu_domain that is functionally compatible with ARM_DMA_USE_IOMMU, dma-iommu.c and iommufd. Be forwards looking and pass in a 'struct device *' argument. We can provide this when allocating the default_domain. No drivers will look at this. Tested-by:
-
Jason Gunthorpe authored
Allocate a domain from a group. Automatically obtains the iommu_ops to use from the device list of the group. Convert the internal callers to use it. Tested-by:
-
Jason Gunthorpe authored
At this point every iommu driver will cause a default_domain to be selected, so we can finally remove this gap from the core code. The following table explains what each driver supports and what the resulting default_domain will be: ops->defaut_domain IDENTITY DMA PLATFORM v ARM32 dma-iommu ARCH amd/iommu.c Y Y N/A either apple-dart.c Y Y N/A either arm-smmu.c Y Y IDENTITY either qcom_iommu.c G Y IDENTITY either arm-smmu-v3.c Y Y N/A either exynos-iommu.c G Y IDENTITY either fsl_pamu_domain.c Y Y N/A N/A PLATFORM intel/iommu.c Y Y N/A either ipmmu-vmsa.c G Y IDENTITY either msm_iommu.c G IDENTITY N/A mtk_iommu.c G Y IDENTITY either mtk_iommu_v1.c G IDENTITY N/A omap-iommu.c G IDENTITY N/A rockchip-iommu.c G Y IDENTITY either s390-iommu.c Y Y N/A N/A PLATFORM sprd-iommu.c Y N/A DMA sun50i-iommu.c G Y IDENTITY either tegra-smmu.c G Y IDENTITY IDENTITY virtio-iommu.c Y Y N/A either spapr Y Y N/A N/A PLATFORM * G means ops->identity_domain is used * N/A means the driver will not compile in this configuration ARM32 drivers select an IDENTITY default domain through either the ops->identity_domain or directly requesting an IDENTIY domain through alloc_domain(). In ARM64 mode tegra-smmu will still block the use of dma-iommu.c and forces an IDENTITY domain. S390 uses a PLATFORM domain to represent when the dma_ops are set to the s390 iommu code. fsl_pamu uses an PLATFORM domain. POWER SPAPR uses PLATFORM and blocking to enable its weird VFIO mode. The x86 drivers continue unchanged. After this patch group->default_domain is only NULL for a short period during bus iommu probing while all the groups are constituted. Otherwise it is always !NULL. This completes changing the iommu subsystem driver contract to a system where the current iommu_domain always represents some form of translation and the driver is continuously asserting a definable translation mode. It resolves the confusion that the original ops->detach_dev() caused around what translation, exactly, is the IOMMU performing after detach. There were at least three different answers to that question in the tree, they are all now clearly named with domain types. Tested-by: -
Jason Gunthorpe authored
Prior to commit 1b932ced ("iommu: Remove detach_dev callbacks") the sun50i_iommu_detach_device() function was being called by ops->detach_dev(). This is an IDENTITY domain so convert sun50i_iommu_detach_device() into sun50i_iommu_identity_attach() and a full IDENTITY domain and thus hook it back up the same was as the old ops->detach_dev(). Reviewed-by:
-
Jason Gunthorpe authored
This brings back the ops->detach_dev() code that commit 1b932ced ("iommu: Remove detach_dev callbacks") deleted and turns it into an IDENTITY domain. Reviewed-by:
-
Jason Gunthorpe authored
This brings back the ops->detach_dev() code that commit 1b932ced ("iommu: Remove detach_dev callbacks") deleted and turns it into an IDENTITY domain. Also reverts commit 584d334b ("iommu/ipmmu-vmsa: Remove ipmmu_utlb_disable()") Reviewed-by:
-
Jason Gunthorpe authored
This brings back the ops->detach_dev() code that commit 1b932ced ("iommu: Remove detach_dev callbacks") deleted and turns it into an IDENTITY domain. Reviewed-by:
-
Jason Gunthorpe authored
All drivers are now using IDENTITY or PLATFORM domains for what this did, we can remove it now. It is no longer possible to attach to a NULL domain. Tested-by:
-
Jason Gunthorpe authored
What msm does during msm_iommu_set_platform_dma() is actually putting the iommu into identity mode. Move to the new core support for ARM_DMA_USE_IOMMU by defining ops->identity_domain. This driver does not support IOMMU_DOMAIN_DMA, however it cannot be compiled on ARM64 either. Most likely it is fine to support dma-iommu.c Reviewed-by:
-
Jason Gunthorpe authored
What omap does during omap_iommu_set_platform_dma() is actually putting the iommu into identity mode. Move to the new core support for ARM_DMA_USE_IOMMU by defining ops->identity_domain. This driver does not support IOMMU_DOMAIN_DMA, however it cannot be compiled on ARM64 either. Most likely it is fine to support dma-iommu.c Reviewed-by:
-
Jason Gunthorpe authored
All ARM64 iommu drivers should support IOMMU_DOMAIN_DMA to enable dma-iommu.c. tegra is blocking dma-iommu usage, and also default_domain's, because it wants an identity translation. This is needed for some device quirk. The correct way to do this is to support IDENTITY domains and use ops->def_domain_type() to return IOMMU_DOMAIN_IDENTITY for only the quirky devices. Add support for IOMMU_DOMAIN_DMA and force IOMMU_DOMAIN_IDENTITY mode for everything so no behavior changes. Reviewed-by:
-
Jason Gunthorpe authored
What tegra-smmu does during tegra_smmu_set_platform_dma() is actually putting the iommu into identity mode. Move to the new core support for ARM_DMA_USE_IOMMU by defining ops->identity_domain. Reviewed-by:
-
Jason Gunthorpe authored
What exynos calls exynos_iommu_detach_device is actually putting the iommu into identity mode. Move to the new core support for ARM_DMA_USE_IOMMU by defining ops->identity_domain. Tested-by:
-
Jason Gunthorpe authored
Even though dma-iommu.c and CONFIG_ARM_DMA_USE_IOMMU do approximately the same stuff, the way they relate to the IOMMU core is quiet different. dma-iommu.c expects the core code to setup an UNMANAGED domain (of type IOMMU_DOMAIN_DMA) and then configures itself to use that domain. This becomes the default_domain for the group. ARM_DMA_USE_IOMMU does not use the default_domain, instead it directly allocates an UNMANAGED domain and operates it just like an external driver. In this case group->default_domain is NULL. If the driver provides a global static identity_domain then automatically use it as the default_domain when in ARM_DMA_USE_IOMMU mode. This allows drivers that implemented default_domain == NULL as an IDENTITY translation to trivially get a properly labeled non-NULL default_domain on ARM32 configs. With this arrangment when ARM_DMA_USE_IOMMU wants to disconnect from the device the normal detach_domain flow will restore the IDENTITY domain as the default domain. Overall this makes attach_dev() of the IDENTITY domain called in the same places as detach_dev(). This effectively migrates these drivers to default_domain mode. For drivers that support ARM64 they will gain support for the IDENTITY translation mode for the dma_api and behave in a uniform way. Drivers use this by setting ops->identity_domain to a static singleton iommu_domain that implements the identity attach. If the core detects ARM_DMA_USE_IOMMU mode then it automatically attaches the IDENTITY domain during probe. Drivers can continue to prevent the use of DMA translation by returning IOMMU_DOMAIN_IDENTITY from def_domain_type, this will completely prevent IOMMU_DMA from running but will not impact ARM_DMA_USE_IOMMU. This allows removing the set_platform_dma_ops() from every remaining driver. Remove the set_platform_dma_ops from rockchip and mkt_v1 as all it does is set an existing global static identity domain. mkt_v1 does not support IOMMU_DOMAIN_DMA and it does not compile on ARM64 so this transformation is safe. Tested-by:
-
Jason Gunthorpe authored
Except for dart (which forces IOMMU_DOMAIN_DMA) every driver returns 0 or IDENTITY from ops->def_domain_type(). The drivers that return IDENTITY have some kind of good reason, typically that quirky hardware really can't support anything other than IDENTITY. Arrange things so that if the driver says it needs IDENTITY then iommu_get_default_domain_type() either fails or returns IDENTITY. It will not ignore the driver's override to IDENTITY. Split the function into two steps, reducing the group device list to the driver's def_domain_type() and the untrusted flag. Then compute the result based on those two reduced variables. Fully reject combining untrusted with IDENTITY. Remove the debugging print on the iommu_group_store_type() failure path, userspace should not be able to trigger kernel prints. This makes the next patch cleaner that wants to force IDENTITY always for ARM_IOMMU because there is no support for DMA. Reviewed-by:
-
Jason Gunthorpe authored
What mtk does during mtk_iommu_v1_set_platform_dma() is actually putting the iommu into identity mode. Make this available as a proper IDENTITY domain. The mtk_iommu_v1_def_domain_type() from commit 8bbe13f5 ("iommu/mediatek-v1: Add def_domain_type") explains this was needed to allow probe_finalize() to be called, but now the IDENTITY domain will do the same job so change the returned def_domain_type. mkt_v1 is the only driver that returns IOMMU_DOMAIN_UNMANAGED from def_domain_type(). This allows the next patch to enforce an IDENTITY domain policy for this driver. Reviewed-by:
-
Jason Gunthorpe authored
Thierry says this is not used anymore, and doesn't think it makes sense as an iommu driver. The HW it supports is about 10 years old now and newer HW uses different IOMMU drivers. As this is the only driver with a GART approach, and it doesn't really meet the driver expectations from the IOMMU core, let's just remove it so we don't have to think about how to make it fit in. It has a number of identified problems: - The assignment of iommu_groups doesn't match the HW behavior - It claims to have an UNMANAGED domain but it is really an IDENTITY domain with a translation aperture. This is inconsistent with the core expectation for security sensitive operations - It doesn't implement a SW page table under struct iommu_domain so * It can't accept a map until the domain is attached * It forgets about all maps after the domain is detached * It doesn't clear the HW of maps once the domain is detached (made worse by having the wrong groups) Cc: Thierry Reding <treding@nvidia.com> Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by:Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Jason Gunthorpe authored
This driver is nonsensical. To not block migrating the core API away from NULL default_domains give it a hacky of a PLATFORM domain that keeps it working exactly as it always did. Leave some comments around to warn away any future people looking at this. Reviewed-by:
-
Jason Gunthorpe authored
The PLATFORM domain will be set as the default domain and attached as normal during probe. The driver will ignore the initial attach from a NULL domain to the PLATFORM domain. After this, the PLATFORM domain's attach_dev will be called whenever we detach from an UNMANAGED domain (eg for VFIO). This is the same time the original design would have called op->detach_dev(). This is temporary until the S390 dma-iommu.c conversion is merged. Tested-by:
-
Jason Gunthorpe authored
POWER is using the set_platform_dma_ops() callback to hook up its private dma_ops, but this is buired under some indirection and is weirdly happening for a BLOCKED domain as well. For better documentation create a PLATFORM domain to manage the dma_ops, since that is what it is for, and make the BLOCKED domain an alias for it. BLOCKED is required for VFIO. Also removes the leaky allocation of the BLOCKED domain by using a global static. Reviewed-by:
-
Jason Gunthorpe authored
This is used when the iommu driver is taking control of the dma_ops, currently only on S390 and power spapr. It is designed to preserve the original ops->detach_dev() semantic that these S390 was built around. Provide an opaque domain type and a 'default_domain' ops value that allows the driver to trivially force any single domain as the default domain. Update iommufd selftest to use this instead of set_platform_dma_ops Reviewed-by:
-
Jason Gunthorpe authored
This allows a driver to set a global static to an IDENTITY domain and the core code will automatically use it whenever an IDENTITY domain is requested. By making it always available it means the IDENTITY can be used in error handling paths to force the iommu driver into a known state. Devices implementing global static identity domains should avoid failing their attach_dev ops. To make global static domains simpler allow drivers to omit their free function and update the iommufd selftest. Convert rockchip to use the new mechanism. Tested-by:
-
- 24 Sep, 2023 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Fix EL2 Stage-1 MMIO mappings where a random address was used - Fix SMCCC function number comparison when the SVE hint is set RISC-V: - Fix KVM_GET_REG_LIST API for ISA_EXT registers - Fix reading ISA_EXT register of a missing extension - Fix ISA_EXT register handling in get-reg-list test - Fix filtering of AIA registers in get-reg-list test x86: - Fixes for TSC_AUX virtualization - Stop zapping page tables asynchronously, since we don't zap them as often as before" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX KVM: SVM: Fix TSC_AUX virtualization setup KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe() KVM: x86/mmu: Open code leaf invalidation from mmu_notifier KVM: riscv: selftests: Selectively filter-out AIA registers KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers KVM: selftests: Assert that vasprintf() is successful KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
-
