- 13 Feb, 2023 5 commits
-
-
Jiri Pirko authored
The driverinit param purpose is to serve the driver during init/reload time to provide a value, either default or set by user. Make sure that driver does not read value updated by user before the reload is performed. Hold the new value in a separate struct and switch it during reload. Note that this is required to be eventually possible to call devl_param_driverinit_value_get() without holding instance lock. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
No need to treat string params any different comparing to other types. Rely on the struct assign to copy the whole struct, including the string. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Yu Xiao authored
Add support for the following modes to the nfp driver: NFP_MEDIA_10GBASE_LR NFP_MEDIA_25GBASE_LR NFP_MEDIA_25GBASE_ER These modes are supported by the hardware and, support for them was recently added to firmware. Signed-off-by:
Yu Xiao <yu.xiao@corigine.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Jacob Keller authored
NL_SET_ERR_MSG_MOD inserts the KBUILD_MODNAME and a ':' before the actual extended error message. The devlink feature hasn't been able to be compiled as a module since commit f4b6bcc7 ("net: devlink: turn devlink into a built-in"). Stop using NL_SET_ERR_MSG_MOD, and just use the base NL_SET_ERR_MSG. This aligns the extended error messages better with the NL_SET_ERR_MSG_ATTR messages as well. Signed-off-by:
-
Pietro Borrello authored
rds_rm_zerocopy_callback() uses list_add_tail() with swapped arguments. This links the list head with the new entry, losing the references to the remaining part of the list. Fixes: 9426bbc6 ("rds: use list structure to track information for zerocopy completion notification") Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Pietro Borrello <borrello@diag.uniroma1.it> Signed-off-by:
-
- 11 Feb, 2023 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-02-09 (i40e) Jan removes i40e_status from the driver; replacing them with standard kernel error codes. Kees Cook replaces 0-length array with flexible array. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: net/i40e: Replace 0-length array with flexible array i40e: use ERR_PTR error print in i40e messages i40e: use int for i40e_status i40e: Remove string printing for i40e_status i40e: Remove unused i40e status codes ==================== Link: https://lore.kernel.org/r/20230209172536.3595838-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Alexandra Winter says: ==================== s390/net: updates 2023-02-06 Just maintenance patches, no functional changes. If you disagree with patch 4, we can leave it out. We prefer scnprintf, but no strong opinion. ==================== Link: https://lore.kernel.org/r/20230209110424.1707501-1-wintera@linux.ibm.comSigned-off-by:
-
Thorsten Winkler authored
This LWN article explains the rationale for this change https: //lwn.net/Articles/69419/ Ie. snprintf() returns what *would* be the resulting length, while scnprintf() returns the actual length. Reported-by:
Jules Irenge <jbi.octave@gmail.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by:
-
Thorsten Winkler authored
Following the advice of the Documentation/filesystems/sysfs.rst. All sysfs related show()-functions should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Reported-by:
Joe Perches <joe@perches.com> Reviewed-by:
-
Thorsten Winkler authored
Use INET6_ADDRSTRLEN constant with size of 48 which be used for char arrays storing ip addresses (for IPv4 and IPv6) Reviewed-by:
-
Alexandra Winter authored
Get rid of multiple smatch warnings, like: warn: inconsistent indenting Reviewed-by:
-
Jakub Kicinski authored
Yoshihiro Shimoda says: ==================== net: renesas: rswitch: Improve TX timestamp accuracy The patch [[123]/4] are minor refacoring for readability. The patch [4/4] is for improving TX timestamp accuracy. To improve the accuracy, it requires refactoring so that this is not a fixed patch. v2: https://lore.kernel.org/all/20230208235721.2336249-1-yoshihiro.shimoda.uh@renesas.com/ v1: https://lore.kernel.org/all/20230208073445.2317192-1-yoshihiro.shimoda.uh@renesas.com/ ==================== Link: https://lore.kernel.org/r/20230209081741.2536034-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
In the previous code, TX timestamp accuracy was bad because the irq handler got the timestamp from the timestamp register at that time. This hardware has "Timestamp capture" feature which can store each TX timestamp into the timestamp descriptors. To improve TX timestamp accuracy, implement timestamp descriptors' handling. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
Yoshihiro Shimoda authored
In the previous code, the gptp flag was completely related to the !dir_tx in struct rswitch_gwca_queue because rswitch_gwca_queue_alloc() was called below: < In rswitch_txdmac_alloc() > err = rswitch_gwca_queue_alloc(ndev, priv, rdev->tx_queue, true, false, TX_RING_SIZE); So, dir_tx = true, and gptp = false. < In rswitch_rxdmac_alloc() > err = rswitch_gwca_queue_alloc(ndev, priv, rdev->rx_queue, false, true, RX_RING_SIZE); So, dir_tx = false, and gptp = true. In the future, a new queue handling for timestamp will be implemented and this gptp flag is confusable. So, remove the gptp flag. Signed-off-by:
-
Yoshihiro Shimoda authored
To improve readability, move linkfix related variables to struct rswitch_gwca. Also, rename function names "desc" with "linkfix". Signed-off-by:
-
Yoshihiro Shimoda authored
To add a new ring which is really related to timestamp (ts_ring) in the future, rename the following members to improve readability: ring --> tx_ring ts_ring --> rx_ring Signed-off-by: -
Dan Carpenter authored
This function always returns success. We need to preserve the error code before setting rx_ring->page_pool = NULL. Fixes: 850b9711 ("net: libwx: Allocate Rx and Tx resources") Signed-off-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y+T4aoefc1XWvGYb@kiliSigned-off-by:
-
Arnd Bergmann authored
A new user of MSCC_OCELOT_SWITCH_LIB was added, bringing back an old link failure that was fixed with e5f31552 ("ethernet: fix PTP_1588_CLOCK dependencies"): x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_ptp_enable': ocelot_ptp.c:(.text+0x8ee): undefined reference to `ptp_find_pin' x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_get_ts_info': ocelot_ptp.c:(.text+0xd5d): undefined reference to `ptp_clock_index' x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_init_timestamp': ocelot_ptp.c:(.text+0x15ca): undefined reference to `ptp_clock_register' x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_deinit_timestamp': ocelot_ptp.c:(.text+0x16b7): undefined reference to `ptp_clock_unregister' Add the same PTP dependency here, as well as in the MSCC_OCELOT_SWITCH_LIB symbol itself to make it more obvious what is going on when the next driver selects it. Fixes: 3d7316ac ("net: dsa: ocelot: add external ocelot switch control") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20230209124435.1317781-1-arnd@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== bridge: mcast: Preparations for VXLAN MDB This patchset contains small preparations for VXLAN MDB that were split from this RFC [1]. Tested using existing bridge MDB forwarding selftests. [1] https://lore.kernel.org/netdev/20230204170801.3897900-1-idosch@nvidia.com/ ==================== Link: https://lore.kernel.org/r/20230209071852.613102-1-idosch@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The kernel maintains three markers for the MDB dump: 1. The last bridge device from which the MDB was dumped. 2. The last MDB entry from which the MDB was dumped. 3. The last port-group entry that was dumped. Add test cases for large scale MDB dump to make sure that all the configured entries are dumped and that the markers are used correctly. Specifically, create 2 bridges with 32 ports and add 256 MDB entries in which all the ports are member of. Test that each bridge reports 8192 (256 * 32) permanent entries. Do that with IPv4, IPv6 and L2 MDB entries. On my system, MDB dump of the above is contained in about 50 netlink messages. Example output: # ./bridge_mdb.sh [...] INFO: # Large scale dump tests TEST: IPv4 large scale dump tests [ OK ] TEST: IPv6 large scale dump tests [ OK ] TEST: L2 large scale dump tests [ OK ] [...] Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Ido Schimmel authored
Future patches are going to move parts of the bridge MDB code to the common rtnetlink code in preparation for VXLAN MDB support. To facilitate code sharing between both drivers, move the validation of the top level attributes in RTM_{NEW,DEL}MDB messages to a policy that will eventually be moved to the rtnetlink code. Use 'NLA_NESTED' for 'MDBA_SET_ENTRY_ATTRS' instead of NLA_POLICY_NESTED() as this attribute is going to be validated using different policies in the underlying drivers. Signed-off-by: -
Ido Schimmel authored
The purpose of the sequence generation counter in the netlink callback is to identify if a multipart dump is consistent or not by calling nl_dump_check_consistent() whenever a message is generated. The function is not invoked by the MDB code, rendering the sequence generation counter assignment pointless. Remove it. Note that even if the function was invoked, we still could not accurately determine if the dump is consistent or not, as there is no sequence generation counter for MDB entries, unlike nexthop objects, for example. Signed-off-by:
-
Ido Schimmel authored
'MDB_PG_FLAGS_PERMANENT' and 'MDB_PERMANENT' happen to have the same value, but the latter is uAPI and cannot change, so use it when dumping an MDB entry. Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== pull-request: bluetooth-next - Add new PID/VID 0489:e0f2 for MT7921 - Add VID:PID 13d3:3529 for Realtek RTL8821CE - Add CIS feature bits to controller information - Set Per Platform Antenna Gain(PPAG) for Intel controllers * tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG) Bluetooth: Make sure LE create conn cancel is sent when timeout Bluetooth: Free potentially unfreed SCO connection Bluetooth: hci_qca: get wakeup status from serdev device handle Bluetooth: L2CAP: Fix potential user-after-free Bluetooth: MGMT: add CIS feature bits to controller information Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds Bluetooth: HCI: Replace zero-length arrays with flexible-array members Bluetooth: qca: Fix sparse warnings Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921 Bluetooth: Fix issue with Actions Semi ATS2851 based devices ==================== Link: https://lore.kernel.org/r/20230209234922.3756173-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e53 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13a ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.netSigned-off-by:
-
Randy Dunlap authored
Correct spelling problems for Documentation/isdn/ as reported by codespell. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20230209071400.31476-9-rdunlap@infradead.orgSigned-off-by:
-
Jakub Kicinski authored
Xin Long says: ==================== net: move more duplicate code of ovs and tc conntrack into nf_conntrack_ovs We've moved some duplicate code into nf_nat_ovs in: "net: eliminate the duplicate code in the ct nat functions of ovs and tc" This patchset addresses more code duplication in the conntrack of ovs and tc then creates nf_conntrack_ovs for them, and four functions will be extracted and moved into it: nf_ct_handle_fragments() nf_ct_skb_network_trim() nf_ct_helper() nf_ct_add_helper() ==================== Link: https://lore.kernel.org/r/cover.1675810210.git.lucien.xin@gmail.comSigned-off-by:
-
Xin Long authored
Now handle_fragments() in OVS and TC have the similar code, and this patch removes the duplicate code by moving the function to nf_conntrack_ovs. Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be done only when defrag returns 0, as it does in other places in kernel. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Aaron Conole <aconole@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Xin Long authored
This patch has no functional changes and just moves frag check and tc_skb_cb update out of handle_fragments, to make it easier to move the duplicate code from handle_fragments() into nf_conntrack_ovs later. Signed-off-by:
-
Xin Long authored
This patch has no functional changes and just moves key and ovs_cb update out of handle_fragments, and skb_clear_hash() and skb->ignore_df change into handle_fragments(), to make it easier to move the duplicate code from handle_fragments() into nf_conntrack_ovs later. Note that it changes to pass info->family to handle_fragments() instead of key for the packet type check, as info->family is set according to key->eth.type in ovs_ct_copy_action() when creating the action. Signed-off-by:
-
Xin Long authored
There are almost the same code in ovs_skb_network_trim() and tcf_ct_skb_network_trim(), this patch extracts them into a function nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs. Signed-off-by:
-
Xin Long authored
Similar to nf_nat_ovs created by Commit ebddb140 ("net: move the nat function to nf_nat_ovs for ovs and tc"), this patch is to create nf_conntrack_ovs to get these functions shared by OVS and TC only. There are nf_ct_helper() and nf_ct_add_helper() from nf_conntrak_helper in this patch, and will be more in the following patches. Signed-off-by:
-
- 10 Feb, 2023 8 commits
-
-
Ilya Leoshkevich authored
The code assumes that everything that comes after nlmsgerr are nlattrs. When calculating their size, it does not account for the initial nlmsghdr. This may lead to accessing uninitialized memory. Fixes: bbf48c18 ("libbpf: add error reporting in XDP") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com
-
Ilya Leoshkevich authored
malloc() and free() may be completely replaced by sanitizers, use fopen() and fclose() instead. Signed-off-by:
-
Ilya Leoshkevich authored
malloc() and free() may be completely replaced by sanitizers, use fopen() and fclose() instead. Signed-off-by:
-
Ilya Leoshkevich authored
To get useful results from the Memory Sanitizer, all code running in a process needs to be instrumented. When building tests with other sanitizers, it's not strictly necessary, but is also helpful. So make sure runqslower and libbpf are compiled with SAN_CFLAGS and linked with SAN_LDFLAGS. Signed-off-by:
-
Ilya Leoshkevich authored
Memory Sanitizer requires passing different options to CFLAGS and LDFLAGS: besides the mandatory -fsanitize=memory, one needs to pass header and library paths, and passing -L to a compilation step triggers -Wunused-command-line-argument. So introduce a separate variable for linker flags. Use $(SAN_CFLAGS) as a default in order to avoid complicating the ASan usage. Signed-off-by:
-
Ilya Leoshkevich authored
This makes it possible to add sanitizer flags. Signed-off-by:
-
Ilya Leoshkevich authored
Using HOSTCC="ccache clang" breaks building the tests, since, when it's forwarded to e.g. bpftool, the child make sees HOSTCC=ccache and "clang" is considered a target. Fix by quoting it, and also HOSTLD and HOSTAR for consistency. Signed-off-by:
-
Jakub Kicinski authored
skbuff_head_cache is misnamed (perhaps for historical reasons?) because it does not hold heads. Head is the buffer which skb->data points to, and also where shinfo lives. struct sk_buff is a metadata structure, not the head. Eric recently added skb_small_head_cache (which allocates actual head buffers), let that serve as an excuse to finally clean this up :) Leave the user-space visible name intact, it could possibly be uAPI. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
