Update the code in vht.c and add the link_id parameter where
necessary.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We don't need to setup lists and work structs every time
we switch the interface type, factor that out into a new
ieee80211_link_init() function and use it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If MLO is enabled by the driver then validate a set of
capabilities that mac80211 will initially not support
in MLO. This might change if features are implemented.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Remove MAX_STA_LINKS and use IEEE80211_MLD_MAX_NUM_LINKS
instead to unify between the station and other data structures.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Refactor the code a bit to initialize a link belonging
to a station, and (later) free all allocated links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The function is unused since commit 52b4810b ("mac80211: Remove
support for changing AP SMPS mode") so we can just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses deflink/bss_conf/etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In a few cases we already have the link ID in the APIs,
pass it already even if it cannot be non-zero yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add pointers so we can start using link_id throughout the
code, even if for now only link ID 0 is valid, pointing
to the "built-in" bss_conf, which is used by drivers that
are not aware of MLD.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Start reorganizing interface related data structures toward
MLD. The most complex part here is for the keys, since we
have to split the various kinds of GTKs off to the link but
still need to use (for WEP) the other keys as a fallback
even for multicast frames.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.

Some adjustments were done with the following spatch:

    @@
    expression sdata;
    struct ieee80211_vif *vifp;
    identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
    @@
    (
    -sdata->vif.bss_conf.var
    +sdata->vif.cfg.var
    |
    -vifp->bss_conf.var
    +vifp->cfg.var
    )

    @bss_conf@
    struct ieee80211_bss_conf *bss_conf;
    identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
    @@
    -bss_conf->var
    +vif_cfg->var

(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

To add MLD, reuse the bss_conf structure later for per-link
information, so move some things into it that are per link.

Most transformations were done with the following spatch:

    @@
    expression sdata;
    identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
    @@
    -sdata->vif.var
    +sdata->vif.bss_conf.var

    @@
    struct ieee80211_vif *vif;
    identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color };
    @@
    -vif->var
    +vif->bss_conf.var
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.

So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.

For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.

Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We don't really care too much right now since our data
structures are set up to not have a problem with this,
but clearly it's wrong to accept WEP and pairwise keys
with key ID > 3.

However, with MLD we need to split into per-link (GTK,
IGTK, BIGTK) and per interface/MLD (including WEP) keys
so make sure this is not a problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ath.git patches for v5.20. Major changes:

ath10k

* 802.3 frame format support

Allow mdb entries to be forwarded to CPU and be switched at the same
time. Only remove entry when no port and the CPU isn't part of the group
anymore.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

napi_build_skb() reuses NAPI skbuff_head cache in order to save some
cycles on freeing/allocating skbuff_heads on every new Rx or completed
Tx.
Use napi_consume_skb() to feed the cache with skbuff_heads of completed
Tx so it's never empty.
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NAPI cache skb_count is being checked twice without condition. Change to
checking the second time only if the first check is run.
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding mdb entries on disabled ports allows you to do setup before
accepting any traffic, avoiding any time where the port is not in the
multicast group.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit
callback.
Tested-by: Sarkar Tirthendu <tirthendu.sarkar@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

phydev->port was not set and always reported as PORT_TP.
Set phydev->port according to inserted SFP module.
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add basic description for the xilinx emaclite driver DT bindings.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: simplify completion statistics

The first patch in this series makes the name used for variables
representing a TRE ring be consistent everywhere.  The second
renames two structure fields to better represent their purpose.

The last four rework a little code that manages some tranaction and
byte transfer statistics maintained mainly for TX endpoints.  For
the most part this series is refactoring.  The last one also
includes the first step toward no longer assuming an event ring is
dedicated to a single channel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename gsi_channel_tx_update() to be gsi_trans_tx_completed(), and
pass it just the transaction pointer, deriving the channel from the
transaction.  Update the comments above the function to provide a
more concise description of how statistics for TX endpoints are
maintained and used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In gsi_evt_ring_rx_update(), we update each transaction so its len
field reflects the actual number of bytes received.  In the process,
the total number of transactions and bytes processed on the channel
are summed, and added to a running total for the channel.

But we don't actually use those running totals for RX endpoints.
They're maintained for TX channels to support CoDel when they are
associated with a "real" network device.

So stop maintaining these totals for RX endpoints, and update the
comment where the fields are defined to make it clear they're only
valid for TX channels.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a TX request is issued, its channel's accumulated byte and
transaction counts are recorded.  This currently does *not* take
into account the transaction being committed.

Later, when the transaction completes, the number of bytes and
transactions that have completed since the transaction was committed
are reported to the network stack.  The transaction and its byte
count are accounted for at that time.

Instead, record the transaction and its bytes in the counts recorded
at commit time.  This avoids the need to do so when the transaction
completes, and provides a (small) simplification of that code.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new function that encapsulates recording information needed
for TX channel statistics when a transaction is committed.

Record the accumulated length in the transaction before the call
(for both RX and TX), so it can be used when updating TX statistics.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two fields in a GSI transaction that keep track of TRE
counts.  The first represents the number of TREs reserved for the
transaction in the TRE ring; that's currently named "tre_count".
The second is the number of TREs that are actually *used* by the
transaction at the time it is committed.

Rename the "tre_count" field to be "rsvd_count", to make its meaning
a little more specific.  The "_count" is present in the name mainly
to avoid interpreting it as a reserved (not-to-be-used) field.  This
name also distinguishes it from the "tre_count" field associated
with a channel.

Rename the "used" field to be "used_count", to match the convention
used for reserved TREs.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All local variables that represent event rings are named "ring".

All but two functions that represent a channel's TRE ring with a
local variable use the name "tre_ring".  For consistency, use that
name in the two functions that don't fit the pattern.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Frank Wunderlich says:

====================
Support mt7531 on BPI-R2 Pro

This Series add Support for the mt7531 switch on Bananapi R2 Pro board.

This board uses port5 of the switch to conect to the gmac0 of the
rk3568 SoC.

Currently CPU-Port is hardcoded in the mt7530 driver to port 6.

Compared to v1 the reset-Patch was dropped as it was not needed and
CPU-Port-changes are completely rewriten based on suggestions/code from
Vladimir Oltean (many thanks to this).
In DTS Patch i only dropped the status-property that was not
needed/ignored by driver.

Due to the Changes i also made a regression test on mt7623 bpi-r2
(mt7623 soc + mt7530) and bpi-r64 (mt7622 soc + mt7531) with cpu-
port 6. Tests were done directly (ipv4 config on dsa user port)
and with vlan-aware bridge including vlan that was tagged outgoing
on dsa user port.
====================

Link: https://lore.kernel.org/r/20220610170541.8643-1-linux@fw-web.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add Device Tree node for mt7531 switch connected to gmac0.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A board may have no independent reset-line, so reset cannot be used
inside switch driver.

E.g. on Bananapi-R2 Pro switch and gmac are connected to same reset-line.

Resets should be acquired only to 1 device/driver. This prevents reset to
be bound to switch-driver if reset is already used for gmac. If reset is
only used by switch driver it resets the switch *and* the gmac after the
mdio bus comes up resulting in mdio bus goes down. It takes some time
until all is up again, switch driver tries to read from mdio, will fail
and defer the probe. On next try the reset does the same again.

Make reset optional for such boards.

Allow port 5 as cpu-port and phy-mode rgmii for mt7531.

- MT7530 supports RGMII on port 5 and RGMII/TRGMII on port 6.
- MT7531 supports on port 5 RGMII and SGMII (dual-sgmii) and
  SGMII on port 6.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Replace last occurences of hardcoded cpu-port by cpu_dp member of
dsa_port struct.

Now the constant can be dropped.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enumerate available cpu-ports instead of using hardcoded constant.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rework vlan_add/vlan_del functions in preparation for dynamic cpu port.

Currently BIT(MT7530_CPU_PORT) is added to new_members, even though
mt7530_port_vlan_add() will be called on the CPU port too.

Let DSA core decide when to call port_vlan_add for the CPU port, rather
than doing it implicitly.

We can do autonomous forwarding in a certain VLAN, but not add br0 to that
VLAN and avoid flooding the CPU with those packets, if software knows it
doesn't need to process them.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Convert txt binding to yaml binding for Mediatek switches.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
mlxsw: Remove XM support

The XM was supposed to be an external device connected to the
Spectrum-{2,3} ASICs using dedicated Ethernet ports. Its purpose was to
increase the number of routes that can be offloaded to hardware. This was
achieved by having the ASIC act as a cache that refers cache misses to the
XM where the FIB is stored and LPM lookup is performed.

Testing was done over an emulator and dedicated setups in the lab, but
the product was discontinued before shipping to customers.

Therefore, in order to remove dead code and reduce complexity of the
code base, revert the three patchsets that added XM support.
====================

Link: https://lore.kernel.org/r/20220613132116.2021055-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 923ba95e ("Merge branch
'mlxsw-spectrum-prepare-for-xm-implementation-lpm-trees'").
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit e7086213 ("Merge branch
'mlxsw-spectrum-prepare-for-xm-implementation-prefix-insertion-and-removal'").
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>