uac_clock_source_is_valid() uses the control selector value to access
the bmControls bitmap of the clock source unit. This is wrong, as
control selector values start from 1, while the bitmap uses all
available bits.

In other words, "Clock Validity Control" is stored in D3..2, not D5..4
of the clock selector unit's bmControls.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Andreas Koch <andreas@akdesigninc.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The IDT codecs initializes the GPIO setup for mute LEDs via
snd_hda_sync_vmaster_hook().  This works in most cases except for the
very first call, which is called before PCM and control creations.
Thus before Master switch is set manually via alsactl, the mute LED
may show the wrong state, depending on the polarity.

Now it's fixed by calling the LED-status update function manually when
no vmaster is set yet.

Cc: <stable@vger.kernel.org> [v3.4+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commit a3e19973 made the LED working again on HP Mini 210 but
with a wrong polarity.  This patch fixes the polarity for this
machine, and also introduce a new model string "hp-inv-led".

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923

Cc: <stable@vger.kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This will fix the following oops:

[    6.169981] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[    6.170851] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e95 #14
[    6.170851] Call Trace:
[    6.170851]  [<c1062237>] ? __setup_irq+0x3c7/0x420
[    6.170851]  [<c1062486>] ? request_threaded_irq+0x76/0x140
[    6.170851]  [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[    6.170851]  [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[    6.170851]  [<c1291196>] ? snd_es1688_create+0x96/0x330
[    6.170851]  [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c10db22f>] ? sysfs_create_link+0xf/0x20
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c11d1502>] ? isa_bus_probe+0x12/0x20
[    6.170851]  [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[    6.170851]  [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[    6.170851]  [<c13705ea>] ? klist_next+0x6a/0xe0
[    6.170851]  [<c11d15c1>] ? isa_bus_match+0x21/0x40
[    6.170851]  [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[    6.170851]  [<c11c9e4b>] ? device_attach+0x7b/0x90
[    6.170851]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.170851]  [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[    6.170851]  [<c11c7493>] ? device_add+0x573/0x620
[    6.170851]  [<c1042820>] ? complete_all+0x40/0x60
[    6.170851]  [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[    6.170851]  [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[    6.170851]  [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[    6.170851]  [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[    6.170851]  [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[    6.170851]  [<c15a9423>] ? do_early_param+0x77/0x77
[    6.170851]  [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[    6.170851]  [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[    6.190170] es1688: can't grab IRQ 5
[    6.190613] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[    6.191566] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e95 #14
[    6.192394] Call Trace:
[    6.192685]  [<c1062237>] ? __setup_irq+0x3c7/0x420
[    6.193342]  [<c1062486>] ? request_threaded_irq+0x76/0x140
[    6.194081]  [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[    6.194607]  [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[    6.194607]  [<c1291196>] ? snd_es1688_create+0x96/0x330
[    6.194607]  [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c10db22f>] ? sysfs_create_link+0xf/0x20
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c11d1502>] ? isa_bus_probe+0x12/0x20
[    6.194607]  [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[    6.194607]  [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[    6.194607]  [<c13705ea>] ? klist_next+0x6a/0xe0
[    6.194607]  [<c11d15c1>] ? isa_bus_match+0x21/0x40
[    6.194607]  [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[    6.194607]  [<c11c9e4b>] ? device_attach+0x7b/0x90
[    6.194607]  [<c11c9d80>] ? __driver_attach+0x80/0x80
[    6.194607]  [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[    6.194607]  [<c11c7493>] ? device_add+0x573/0x620
[    6.194607]  [<c1042820>] ? complete_all+0x40/0x60
[    6.194607]  [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[    6.194607]  [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[    6.194607]  [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[    6.194607]  [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[    6.194607]  [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[    6.194607]  [<c15a9423>] ? do_early_param+0x77/0x77
[    6.194607]  [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[    6.194607]  [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[    6.210779] es1688: can't grab IRQ 5
[    6.211305] gusextreme: probe of gusextreme.0 failed with error -16
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On recent kernels, Realtek codec parser tries to optimize the routing
aggressively and take the headphone output as primary at first.  This
caused a regression on VAIO Z with ALC889, the silent output from the
speaker.

The problem seems that the speaker pin must be connected to the first
DAC (0x02) on this machine by some reason although the codec itself
advertises the flexible routing with any DACs.

This patch adds a fix-up for choosing the speaker pin as the primary
so that the right DAC is assigned on this device.
Reported-and-tested-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The recent fix to converter detaching timing in patch_hdmi.c
leads to a kernel WARNING due to a sanity check when the debug
option is set.  Add a workaround by setting a dummy hinfo->nid.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The generic HDMI code detaches the converter from the stream when
unused, but it must be done rather in the close callback instead of
the cleanup callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BIOS on HP Mini 210 doesn't provide the proper "HP_Mute_LED" DMI
string, thus the driver doesn't initialize the GPIO, too.  In the
earlier kernel, the driver falls back to GPIO1, but since 3.3 we've
stopped this due to other wrongly advertised machines.

For fixing this particular case, add a new model type to specify the
default polarity explicitly so that the fallback to GPIO1 is handled.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=772923

Cc: <stable@vger.kernel.org> [v3.3+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The irq field of struct snd_mpu401 is supposed to be initialized to -1.
Since it's set to zero as of now, a probing error before the irq
installation results in a kernel warning "Trying to free already-free
IRQ 0".

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44821
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We've got a bug report about the silent output from the headphone on a
mobo with VT2021, and spotted out that this was because of the wrong
D3 state on the DAC for the headphone output.  The bug is triggered by
the incomplete check for this DAC in set_widgets_power_state_vt1718S().
It checks only the connectivity of the primary output (0x27) but
doesn't consider the path from the headphone pin (0x28).

Now this patch fixes the problem by checking both pins for DAC 0x0b.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: Additional updates for 3.6

A few more fixes for 3.6, some of which are relatively important -
they've all been in -next for at least some time.

- DAPM fixes for the recent locking changes.
- Fix for _PRE and _POST widgets (which have been broken for a few
  releases now).
- A couple of minor driver updates.

Ever since the DAPM performance improvements we've been marking all widgets
as not dirty after each DAPM run. Since _PRE and _POST events aren't part
of the DAPM graph this has rendered them non-functional, they will never be
marked dirty again and thus will never be run again.

Fix this by skipping them when marking widgets as not dirty.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@vger.kernel.org

Also add a model/fixup string "lenovo-dock", so that other Thinkpad
users will be able to test this fixup easily, to see if it enables
dock I/O for them as well.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1026953Tested-by: John McCarron <john.mccarron@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Turn on the pin widget's PIN_OUT bit from playback prepare. The pin is
enabled in open, but is disabled in hdmi_init_pin which is called during
system resume.  This causes a system suspend/resume during playback to
mute HDMI/DP. Enabling the pin in prepare instead of open allows calling
snd_pcm_prepare after a system resume to restore audio.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This merges the changes for converting to new PM ops for platform
and some other drivers.
Also move some header files to local places from the public
include/sound.

ASoC: Updates for 3.6

This has been a pretty quiet release - very little activity in framework
terms, mostly just a few new drivers and updates:

- Added the ability to add and remove DAPM paths dynamically, mostly for
  reparenting on clock changes.
- New machine drivers for Marvell Brownstone, ST-Ericsson Ux500
  reference platform and ttc-dkp.
- New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP,
  Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF
- New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500, TI
  Isabelle and Wolfson Microelectronics WM5102 and WM5110

The MX31 Audmux also has 7 Ports.
This patch adds the missing define, and makes the debugfs code iterate
over that port too.
Signed-off-by: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The conversion of the core driver to irqdomains means that we don't need
and irq_base to have working interrupts so use wm8994_request_irq() to
deal with looking up the interrupt number for the micdet IRQ.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

A recent commit made patch_alc268 call snd_hda_pick_fixup with
NULL quirk pointer. Make sure we do not reference that NULL pointer.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Generic updates for sound 3.6

This is a large chunk merge for 3.6 HD-audio things

This codec has a separate dmic path (separate dmic only ADC),
and thus it looks mostly like ALC275.

Cc: stable@kernel.org
BugLink: https://bugs.launchpad.net/bugs/1025377Tested-by: Ray Chen <ray.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since some jack controls may be renamed as phantom jacks, the existing
check for index conflicts doesn't work because it simply compares the
name with the last used name, assuming that the controls with the same
name continue.  Thus, it would result in the duplicated controls when
two or more phantom jacks with the very same type exist, and the
driver gives up with an error.

This patch fixes the problem by checking the index number conflicts
more intensively (but dumbly).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In the previous commit, snd_opti9xx_configure() is called from the
resume handler but it's still marked as __devinit.  Fix it.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Implement suspend/resume support for Opti 92x and 93x chips.
Tested with Opti 929A+AD1848 and Opti 931.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Vendor ID 0x10de0051 is used by a yet-to-be-named GPU chip.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Andy Ritger <aritger@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

According to Xingchao,
  This works for HDMI audio, otherwise there's blocking issue.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

0x80862807 is HDMI id for Haswell HDA.
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

this patch add proper id for Haswell HDA Controller.

[Added AZX_DCAPS_POSFIX_COMBO flag by tiwai]
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Yamaha OPL3-SAx chips don't resume properly when playback is running -
garbage is played after resume. Restoring the CS4231_PLAYBK_FORMAT register
last fixes the problem.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

By setting SNDRV_PCM_INFO_RESUME, wss_lib claims that it can restore the card
state fully on resume. But in fact, it can't as DMA is not restored so any
playback/capture running during suspend will fail to continue after resume.

Remove SNDRV_PCM_INFO_RESUME flag from pcm info field to fix the problem.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of the hard-to-mantain TLV_DB_RANGE_HEAD macro, use
DECLARE_TLV_DB_RANGE, which computes its size automatically.

(Also make this data const on the way.)
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a DECLARE_TLV_DB_RANGE() macro so that dB range information
can be specified without having to count the items manually for
TLV_DB_RANGE_HEAD().
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the DECLARE_TLV_CONTAINER() macro to allow having static
TLVs containing more than one item.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add helper macros with a little bit of preprocessor magic to
automatically compute the length of a TLV item.  This lets us avoid
having to compute this by hand, and will allow to use items that do
not use a fixed length.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The s3c2410_gpio* calls are obsolete and have been scheduled for
removal since several kernel releases. Remove them and use common
gpiolib API.
This patch is a prerequisite for removal of the obsolete S3C24XX
SoC GPIO definitions.

Compile tested only.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The s3c2410_gpio* calls are obsolete and have been scheduled for
removal since several kernel releases. Remove them and use common
gpiolib API.
This patch is a prerequisite for removal of the obsolete S3C24XX
SoC GPIO definitions.

Tested on Micro2440-SDK.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>