Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.

nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.

netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.

We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We'll need an explicitly locked rate node API for netdevsim
to switch eswitch mode setting to locked.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In prep for .eswitch_mode_set being called with the devlink instance
lock held use that lock explicitly instead of creating a local mutex
just for the sriov reconfig.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tong Zhang says:

====================
fix typos: "to short" -> "too short"

doing some code review and I found out there are a couple of places
where "too short" is misspelled as "to short".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

"frame to short" -> "frame too short"
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"Frame to short" -> "Frame too short"
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"packet length to short" -> "packet length too short"
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

"RX USB to short" -> "RX USB too short"
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Casper Andersson says:

====================
net: sparx5: Add multicast support

Add multicast support to Sparx5.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds mdb handlers. Uses the PGID arbiter to
find a free entry in the PGID table for the
multicast group port mask.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PGID (Port Group ID) table holds port masks
for different purposes. The first 72 are reserved
for port destination masks, flood masks, and CPU
forwarding. The rest are shared between multicast,
link aggregation, and virtualization profiles. The
GLAG area is reserved to not be used by anything
else, since it is a subset of the MCAST area.

The arbiter keeps track of which entries are in
use. You can ask for a free ID or give back one
you are done using.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
nfp: support for NFP-3800

Yinjun Zhan says:

This is the second of a two part series to support the NFP-3800 device.

To utilize the new hardware features of the NFP-3800, driver adds support
of a new data path NFDK. This series mainly does some refactor work to the
data path related implementations. The data path specific implementations
are now separated into nfd3 and nfdk directories respectively, and the
common part is also moved into a new file.

* The series starts with a small refinement in Patch 1/10. Patches 2/10 and
  3/10 are the main refactoring of data path implementation, which prepares
  for the adding the NFDK data path.
* Before the introduction of NFDK, there's some more preparation work
  for NFP-3800 features, such as multi-descriptor per-packet and write-back
  mechanism of TX pointer, which is done in patches 4/10, 5/10, 6/10, 7/10.
* Patch 8/10 allows the driver to select data path according
  to firmware version. Finally, patches 9/10 and 10/10 introduce the new
  NFDK data path.

Changes between v1 and v2
* Correct kdoc for nfp_nfdk_tx()
* Correct build warnings on 32-bit

Thanks to everyone who contributed to this work.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to the different definition of txbuf in NFDK comparing to NFD3,
there're no pre-allocated txbufs for xdp use in NFDK's implementation,
we just use the existed rxbuf and recycle it when xdp tx is completed.

For each packet to transmit in xdp path, we cannot use more than
`NFDK_TX_DESC_PER_SIMPLE_PKT` txbufs, one is to stash virtual address,
and another is for dma address, so currently the amount of transmitted
bytes is not accumulated. Also we borrow the last bit of virtual addr
to indicate a new transmitted packet due to address's alignment
attribution.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new data path.  The TX is completely different, each packet
has multiple descriptor entries (between 2 and 32).  TX ring is
divided into blocks 32 descriptor, and descritors of one packet
can't cross block bounds. The RX side is the same for now.

ABI version 5 or later is required.  There is no support for
VLAN insertion on TX. XDP_TX action and AF_XDP zero-copy is not
implemented in NFDK path.

Changes to Jakub's work:
* Move statistics of hw_csum_tx after jumbo packet's segmentation.
* Set L3_CSUM flag to enable recaculating of L3 header checksum
in ipv4 case.
* Mark the case of TSO a packet with metadata prepended as
unsupported.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Xingfeng Hu <xingfeng.hu@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Dianchao Wang <dianchao.wang@corigine.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare for choosing data path based on the firmware version field.
Exploit one bit from the reserved byte in the firmware version field
as the data path type.  We need the firmware version right after
vNIC is allocated, so it has to be read inside nfp_net_alloc(),
callers don't have to set it afterwards.

Following patches will bring the implementation of the second data
path.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure that features supported only by some of the data paths
are not enabled for all.  Add a mask of supported features into
the data path op structure.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Newer versions of the PCIe microcode support writing back the
position of the TX pointer back into host memory.  This speeds
up TX completions, because we avoid a read from device memory
(replacing PCIe read with DMA coherent read).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QCidx is not used on fast path, move it to the lower cacheline.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

New datapaths may use multiple descriptor units to describe
a single packet.  Prepare for that by adding a descriptors
per simple frame constant into ring size calculations.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To reduce the coupling of slow path ring implementations and their
callers, use callbacks instead.

Changes to Jakub's work:
* Also use callbacks for xmit functions
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for support for a new datapath format move all
ring and fast path logic into separate files. It is basically
a verbatim move with some wrapping functions, no new structures
and functions added.

The current data path is called NFD3 from the initial version
of the driver ABI it used. The non-fast path, but ring related
functions are moved to nfp_net_dp.c file.

Changes to Jakub's work:
* Rebase on xsk related code.
* Split the patch, move the callback changes to next commit.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ring enable masks are 64bit long.  Replace mask calculation from:
  block_cnt == 64 ? 0xffffffffffffffffULL : (1 << block_cnt) - 1
with:
  (U64_MAX >> (64 - block_cnt))
to simplify the code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next.
This patchset contains updates for the nf_tables register tracking
infrastructure, disable bogus warning when attaching ct helpers,
one namespace pollution fix and few cleanups for the flowtable.

1) Revisit conntrack gc routine to reduce chances of overruning
   the netlink buffer from the event path. From Florian Westphal.

2) Disable warning on explicit ct helper assignment, from Phil Sutter.

3) Read-only expressions do not update registers, mark them as
   NFT_REDUCE_READONLY. Add helper functions to update the register
   tracking information. This patch re-enables the register tracking
   infrastructure.

4) Cancel register tracking in case an expression fully/partially
   clobbers existing data.

5) Add register tracking support for remaining expressions: ct,
   lookup, meta, numgen, osf, hash, immediate, socket, xfrm, tunnel,
   fib, exthdr.

6) Rename init and exit functions for the conntrack h323 helper,
   from Randy Dunlap.

7) Remove redundant field in struct flow_offload_work.

8) Update nf_flow_table_iterate() to pass flowtable to callback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Standalone ports use vid 0. Let the bridge use vid 1 when
"vlan_default_pvid 0" is set to avoid collisions. Since no
VLAN is created when default pvid is 0 this is set
at "PORT_ATTR_SET" and handled in the Switchdev fdb handler.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

allocated_mem is allocated by kcalloc(). The memory is set to zero.
It is unnecessary to call memset again.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In calipso_map_cat_ntoh(), in the for loop, if the return value of
netlbl_bitmap_walk() is equal to (net_clen_bits - 1), when
netlbl_bitmap_walk() is called next time, out-of-bounds memory accesses
of bitmap[byte_offset] occurs.

The bug was found during fuzzing. The following is the fuzzing report
 BUG: KASAN: slab-out-of-bounds in netlbl_bitmap_walk+0x3c/0xd0
 Read of size 1 at addr ffffff8107bf6f70 by task err_OH/252

 CPU: 7 PID: 252 Comm: err_OH Not tainted 5.17.0-rc7+ #17
 Hardware name: linux,dummy-virt (DT)
 Call trace:
  dump_backtrace+0x21c/0x230
  show_stack+0x1c/0x60
  dump_stack_lvl+0x64/0x7c
  print_address_description.constprop.0+0x70/0x2d0
  __kasan_report+0x158/0x16c
  kasan_report+0x74/0x120
  __asan_load1+0x80/0xa0
  netlbl_bitmap_walk+0x3c/0xd0
  calipso_opt_getattr+0x1a8/0x230
  calipso_sock_getattr+0x218/0x340
  calipso_sock_getattr+0x44/0x60
  netlbl_sock_getattr+0x44/0x80
  selinux_netlbl_socket_setsockopt+0x138/0x170
  selinux_socket_setsockopt+0x4c/0x60
  security_socket_setsockopt+0x4c/0x90
  __sys_setsockopt+0xbc/0x2b0
  __arm64_sys_setsockopt+0x6c/0x84
  invoke_syscall+0x64/0x190
  el0_svc_common.constprop.0+0x88/0x200
  do_el0_svc+0x88/0xa0
  el0_svc+0x128/0x1b0
  el0t_64_sync_handler+0x9c/0x120
  el0t_64_sync+0x16c/0x170
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The flowtable object is already passed as argument to
nf_flow_table_iterate(), do use not data pointer to pass flowtable.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Already available through the flowtable object, remove it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Eliminate anonymous module_init() and module_exit(), which can lead to
confusion or ambiguity when reading System.map, crashes/oops/bugs,
or an initcall_debug log.

Give each of these init and exit functions unique driver-specific
names to eliminate the anonymous names.

Example 1: (System.map)
 ffffffff832fc78c t init
 ffffffff832fc79e t init
 ffffffff832fc8f8 t init

Example 2: (initcall_debug log)
 calling  init+0x0/0x12 @ 1
 initcall init+0x0/0x12 returned 0 after 15 usecs
 calling  init+0x0/0x60 @ 1
 initcall init+0x0/0x60 returned 0 after 2 usecs
 calling  init+0x0/0x9a @ 1
 initcall init+0x0/0x9a returned 0 after 74 usecs

Fixes: f587de0e ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if we can elide the load. Cancel if the new candidate
isn't identical to previous store.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The fib expression stores to a register, so we can't add empty stub.
Check that the register that is being written is in fact redundant.

In most cases, this is expected to cancel tracking as re-use is
unlikely.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
tunnel expression performs. This allows to skip this redundant operation.
If the destination contains a different selector, update the register
tracking information. This patch does not perform bitwise tracking.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
xfrm expression performs. This allows to skip this redundant operation.
If the destination contains a different selector, update the register
tracking information.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
socket expression performs. This allows to skip this redundant
operation.  If the destination contains a different selector, update the
register tracking information.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The immediate expression might clobber existing data on the registers,
cancel register tracking for the destination register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Check if the destination register already contains the data that this
osf expression performs. Always cancel register tracking for jhash since
this requires tracking multiple source registers in case of
concatenations. Perform register tracking (without bitwise) for symhash
since input does not come from source register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Allow to recycle the previous output of the OS fingerprint expression
if flags and ttl are the same.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Random and increment are stateful, each invocation results in fresh output.
Cancel register tracking for these two expressions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

its enough to export the meta get reduce helper and then call it
from nft_meta_bridge too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>