- 21 Oct, 2017 34 commits
-
-
Alexandre Belloni authored
[ Upstream commit e3ccc921 ] When going to suspend, the I2C registers may be lost because the power to VDDcore is cut. Restore them when resuming. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ram Amrani authored
[ Upstream commit c5212b94 ] Currently the state is read only after the buffers are relesed. Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ram Amrani authored
[ Upstream commit c2dedf87 ] Reserving doorbell BAR space according to the currently active CPUs may result in a bug if disabled CPUs are later enabled but no doorbell space was reserved for them. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit afe981d6 ] Driver currently utilizes the same loop variable in two nested loops. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Thomas Petazzoni authored
[ Upstream commit 36fb7435 ] The mvpp2_txq_bufs_free() function is called upon TX completion to DMA unmap TX buffers, and free the corresponding SKBs. It gets the references to the SKB to free and the DMA buffer to unmap from a per-CPU txq_pcpu data structure. However, the code currently increments the pointer to the next entry before doing the DMA unmap and freeing the SKB. It does not cause any visible problem because for a given SKB the TX completion is guaranteed to take place on the CPU where the TX was started. However, it is much more logical to increment the pointer to the next entry once the current entry has been completely unmapped/released. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Nicolai Hähnle authored
[ Upstream commit 4694335d ] When the fast blit path fails while attempting to move a buffer from RAM to VRAM, we fall back to a CPU-based memcpy that cannot handle split VRAM buffers. Instead of crashing, simply fail the buffer move. Ideally, we would teach TTM about split buffers so that the fallback still works in this case, but that is quite involved. So for now, apply the simplest possible fix. Fixes: 40361bb1704b ("drm/amdgpu: add VRAM manager v2") Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 72cedf59 ] We should not select drivers that depend on I2C when that is disabled, as it results in a build error: warning: (SND_SOC_MT2701_CS42448) selects SND_SOC_CS42XX8_I2C which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && I2C) sound/soc/codecs/cs42xx8-i2c.c:60:1: warning: data definition has no type or storage class module_i2c_driver(cs42xx8_i2c_driver); sound/soc/codecs/cs42xx8-i2c.c:60:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] Fixes: 1f458d53 ("ASoC: mediatek: Add mt2701-cs42448 driver and config option.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 4d7d39a1 ] We accidentally return an uninitialized variable on success. Fixes: b6ff1b14 ("[SCSI] scsi_dh: Update EMC handler") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Grygorii Maistrenko authored
[ Upstream commit c6e28895 ] In case CONFIG_SLUB_DEBUG_ON=n, find_mergeable() gets debug features from commandline but never checks if there are features from the SLAB_NEVER_MERGE set. As a result selected by slub_debug caches are always mergeable if they have been created without a custom constructor set or without one of the SLAB_* debug features on. This moves the SLAB_NEVER_MERGE check below the flags update from commandline to make sure it won't merge the slab cache if one of the debug features is on. Link: http://lkml.kernel.org/r/20170101124451.GA4740@lp-laptop-dSigned-off-by:
Grygorii Maistrenko <grygoriimkd@gmail.com> Reviewed-by:
Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Ren authored
[ Upstream commit 439a36b8 ] We are in the situation that we have to avoid recursive cluster locking, but there is no way to check if a cluster lock has been taken by a precess already. Mostly, we can avoid recursive locking by writing code carefully. However, we found that it's very hard to handle the routines that are invoked directly by vfs code. For instance: const struct inode_operations ocfs2_file_iops = { .permission = ocfs2_permission, .get_acl = ocfs2_iop_get_acl, .set_acl = ocfs2_iop_set_acl, }; Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR): do_sys_open may_open inode_permission ocfs2_permission ocfs2_inode_lock() <=== first time generic_permission get_acl ocfs2_iop_get_acl ocfs2_inode_lock() <=== recursive one A deadlock will occur if a remote EX request comes in between two of ocfs2_inode_lock(). Briefly describe how the deadlock is formed: On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of the remote EX lock request. Another hand, the recursive cluster lock (the second one) will be blocked in in __ocfs2_cluster_lock() because of OCFS2_LOCK_BLOCKED. But, the downconvert never complete, why? because there is no chance for the first cluster lock on this node to be unlocked - we block ourselves in the code path. The idea to fix this issue is mostly taken from gfs2 code. 1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track of the processes' pid who has taken the cluster lock of this lock resource; 2. introduce a new flag for ocfs2_inode_lock_full: OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for us if we've got cluster lock. 3. export a helper: ocfs2_is_locked_by_me() is used to check if we have got the cluster lock in the upper code path. The tracking logic should be used by some of the ocfs2 vfs's callbacks, to solve the recursive locking issue cuased by the fact that vfs routines can call into each other. The performance penalty of processing the holder list should only be seen at a few cases where the tracking logic is used, such as get/set acl. You may ask what if the first time we got a PR lock, and the second time we want a EX lock? fortunately, this case never happens in the real world, as far as I can see, including permission check, (get|set)_(acl|attr), and the gfs2 code also do so. [sfr@canb.auug.org.au remove some inlines] Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.comSigned-off-by:
Eric Ren <zren@suse.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Yasuaki Ishimatsu authored
[ Upstream commit ddffe98d ] To identify that pages of page table are allocated from bootmem allocator, magic number sets to page->lru.next. But page->lru list is initialized in reserve_bootmem_region(). So when calling free_pagetable(), the function cannot find the magic number of pages. And free_pagetable() frees the pages by free_reserved_page() not put_page_bootmem(). But if the pages are allocated from bootmem allocator and used as page table, the pages have private flag. So before freeing the pages, we should clear the private flag by put_page_bootmem(). Before applying the commit 7bfec6f4 ("mm, page_alloc: check multiple page fields with a single branch"), we could find the following visible issue: BUG: Bad page state in process kworker/u1024:1 page:ffffea103cfd8040 count:0 mapcount:0 mappi flags: 0x6fffff80000800(private) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x800(private) <snip> Call Trace: [...] dump_stack+0x63/0x87 [...] bad_page+0x114/0x130 [...] free_pages_prepare+0x299/0x2d0 [...] free_hot_cold_page+0x31/0x150 [...] __free_pages+0x25/0x30 [...] free_pagetable+0x6f/0xb4 [...] remove_pagetable+0x379/0x7ff [...] vmemmap_free+0x10/0x20 [...] sparse_remove_one_section+0x149/0x180 [...] __remove_pages+0x2e9/0x4f0 [...] arch_remove_memory+0x63/0xc0 [...] remove_memory+0x8c/0xc0 [...] acpi_memory_device_remove+0x79/0xa5 [...] acpi_bus_trim+0x5a/0x8d [...] acpi_bus_trim+0x38/0x8d [...] acpi_device_hotplug+0x1b7/0x418 [...] acpi_hotplug_work_fn+0x1e/0x29 [...] process_one_work+0x152/0x400 [...] worker_thread+0x125/0x4b0 [...] kthread+0xd8/0xf0 [...] ret_from_fork+0x22/0x40 And the issue still silently occurs. Until freeing the pages of page table allocated from bootmem allocator, the page->freelist is never used. So the patch sets magic number to page->freelist instead of page->lru.next. [isimatu.yasuaki@jp.fujitsu.com: fix merge issue] Link: http://lkml.kernel.org/r/722b1cc4-93ac-dd8b-2be2-7a7e313b3b0b@gmail.com Link: http://lkml.kernel.org/r/2c29bd9f-5b67-02d0-18a3-8828e78bbb6f@gmail.comSigned-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
-
Milan Broz authored
[ Upstream commit 12cb3a1c ] Since the commit f1c131b4 crypto: xts - Convert to skcipher the XTS mode is based on ECB, so the mode must select ECB otherwise it can fail to initialize. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Majd Dibbiny authored
[ Upstream commit 95f1ba9a ] In the VF driver, module parameter mlx4_log_num_mgm_entry_size was mistakenly overwritten -- and in a manner which overrode the device-managed flow steering option encoded in the parameter. log_num_mgm_entry_size is a global module parameter which affects all ConnectX-3 PFs installed on that host. If a VF changes log_num_mgm_entry_size, this will affect all PFs which are probed subsequent to the change (by disabling DMFS for those PFs). Fixes: 3c439b55 ("mlx4_core: Allow choosing flow steering mode") Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Vijay Kumar authored
[ Upstream commit 7dd4fcf5 ] On panic, all other CPUs are stopped except the one which had hit panic. To keep console alive, we need to migrate hvcons irq to panicked CPU. Signed-off-by:
Vijay Kumar <vijay.ac.kumar@oracle.com> Signed-off-by:
-
Shaohua Li authored
[ Upstream commit d939cdfd ] Commit 03a9e24e(md linear: fix a race between linear_add() and linear_congested()) introduces the warnning. Acked-by:
Coly Li <colyli@suse.de> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Jaegeuk Kim authored
[ Upstream commit 86d54795 ] Otherwise we can get livelock like below. [79880.428136] dbench D 0 18405 18404 0x00000000 [79880.428139] Call Trace: [79880.428142] __schedule+0x219/0x6b0 [79880.428144] schedule+0x36/0x80 [79880.428147] schedule_timeout+0x243/0x2e0 [79880.428152] ? update_sd_lb_stats+0x16b/0x5f0 [79880.428155] ? ktime_get+0x3c/0xb0 [79880.428157] io_schedule_timeout+0xa6/0x110 [79880.428161] __lock_page+0xf7/0x130 [79880.428164] ? unlock_page+0x30/0x30 [79880.428167] pagecache_get_page+0x16b/0x250 [79880.428171] grab_cache_page_write_begin+0x20/0x40 [79880.428182] f2fs_write_begin+0xa2/0xdb0 [f2fs] [79880.428192] ? f2fs_mark_inode_dirty_sync+0x16/0x30 [f2fs] [79880.428197] ? kmem_cache_free+0x79/0x200 [79880.428203] ? __mark_inode_dirty+0x17f/0x360 [79880.428206] generic_perform_write+0xbb/0x190 [79880.428213] ? file_update_time+0xa4/0xf0 [79880.428217] __generic_file_write_iter+0x19b/0x1e0 [79880.428226] f2fs_file_write_iter+0x9c/0x180 [f2fs] [79880.428231] __vfs_write+0xc5/0x140 [79880.428235] vfs_write+0xb2/0x1b0 [79880.428238] SyS_write+0x46/0xa0 [79880.428242] entry_SYSCALL_64_fastpath+0x1e/0xad Fixes: cae96a5c8ab6 ("f2fs: check io submission more precisely") Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Robbie Ko authored
[ Upstream commit 4dd9920d ] Under certain situations, an incremental send operation can fail due to a premature attempt to create a new top level inode (a direct child of the subvolume/snapshot root) whose name collides with another inode that was removed from the send snapshot. Consider the following example scenario. Parent snapshot: . (ino 256, gen 8) |---- a1/ (ino 257, gen 9) |---- a2/ (ino 258, gen 9) Send snapshot: . (ino 256, gen 3) |---- a2/ (ino 257, gen 7) In this scenario, when receiving the incremental send stream, the btrfs receive command fails like this (ran in verbose mode, -vv argument): rmdir a1 mkfile o257-7-0 rename o257-7-0 -> a2 ERROR: rename o257-7-0 -> a2 failed: Is a directory What happens when computing the incremental send stream is: 1) An operation to remove the directory with inode number 257 and generation 9 is issued. 2) An operation to create the inode with number 257 and generation 7 is issued. This creates the inode with an orphanized name of "o257-7-0". 3) An operation rename the new inode 257 to its final name, "a2", is issued. This is incorrect because inode 258, which has the same name and it's a child of the same parent (root inode 256), was not yet processed and therefore no rmdir operation for it was yet issued. The rename operation is issued because we fail to detect that the name of the new inode 257 collides with inode 258, because their parent, a subvolume/snapshot root (inode 256) has a different generation in both snapshots. So fix this by ignoring the generation value of a parent directory that matches a root inode (number 256) when we are checking if the name of the inode currently being processed collides with the name of some other inode that was not yet processed. We can achieve this scenario of different inodes with the same number but different generation values either by mounting a filesystem with the inode cache option (-o inode_cache) or by creating and sending snapshots across different filesystems, like in the following example: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/a1 $ mkdir /mnt/a2 $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ btrfs send /mnt/snap1 -f /tmp/1.snap $ umount /mnt $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ touch /mnt/a2 $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs receive /mnt -f /tmp/1.snap # Take note that once the filesystem is created, its current # generation has value 7 so the inode from the second snapshot has # a generation value of 7. And after receiving the first snapshot # the filesystem is at a generation value of 10, because the call to # create the second snapshot bumps the generation to 8 (the snapshot # creation ioctl does a transaction commit), the receive command calls # the snapshot creation ioctl to create the first snapshot, which bumps # the filesystem's generation to 9, and finally when the receive # operation finishes it calls an ioctl to transition the first snapshot # (snap1) from RW mode to RO mode, which does another transaction commit # and bumps the filesystem's generation to 10. $ rm -f /tmp/1.snap $ btrfs send /mnt/snap1 -f /tmp/1.snap $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap $ umount /mnt $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt $ btrfs receive /mnt /tmp/1.snap # Receive of snapshot snap2 used to fail. $ btrfs receive /mnt /tmp/2.snap Signed-off-by:
Robbie Ko <robbieko@synology.com> Reviewed-by:
Filipe Manana <fdmanana@suse.com> [Rewrote changelog to be more precise and clear] Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit a499c3ea ] This is triggered during boot when CONFIG_SCHED_DEBUG is enabled: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 81 at kernel/sched/sched.h:812 set_next_entity+0x11d/0x380 rq->clock_update_flags < RQCF_ACT_SKIP CPU: 6 PID: 81 Comm: torture_shuffle Not tainted 4.10.0+ #1 Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016 Call Trace: dump_stack+0x85/0xc2 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 set_next_entity+0x11d/0x380 set_curr_task_fair+0x2b/0x60 do_set_cpus_allowed+0x139/0x180 __set_cpus_allowed_ptr+0x113/0x260 set_cpus_allowed_ptr+0x10/0x20 torture_shuffle+0xfd/0x180 kthread+0x10f/0x150 ? torture_shutdown_init+0x60/0x60 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x31/0x40 ---[ end trace dd94d92344cea9c6 ]--- The task is running && !queued, so there is no rq clock update before calling set_curr_task(). This patch fixes it by updating rq clock after holding rq->lock/pi_lock just as what other dequeue + put_prev + enqueue + set_curr story does. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1487749975-5994-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Yunlong Song authored
[ Upstream commit 035e97ad ] In allocate_segment_by_default(), need_SSR() already detected it's time to do SSR. So, let's try to find victims for data segments more aggressively in time. Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit ca1c39ef ] Reorder error handling labels in order to match the way resources have been allocated. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jarno Rajahalme authored
[ Upstream commit 4b86c459 ] Commit 4dee62b1 ("netfilter: nf_ct_expect: nf_ct_expect_insert() returns void") inadvertently changed the successful return value of nf_ct_expect_related_report() from 0 to 1 due to __nf_ct_expect_check() returning 1 on success. Prevent this regression in the future by changing the return value of __nf_ct_expect_check() to 0 on success. Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Michael Zoran authored
[ Upstream commit 6cf1bf63 ] The original github source allowed for the cache-line-size property to be missing. Since recent firmwares also require this property, it makes sense to always require it in the driver as well. If the cache-line-size property is missing, then the driver probe should fail as no dev since the kernel and dt may be out of sync. The fix is to add a check for the return value of of_property_read_u32. Changes V2: 1. Add error message if cache-line-size is missing. 2. Simple check for non-zero return value from of_property_read_u32. Signed-off-by:
Michael Zoran <mzoran@crowfest.net> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 47d3a075 ] The cited commit makes a great job of finding optimal shift/multiplier values assuming a 10 seconds wrap around, but forgot to change the overflow_period computation. It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms, which is silly. Lets simply use 5 seconds, no need to recompute this, given how it is supposed to work. Later, we will use a timer instead of a work queue, since the new RX allocation schem will no longer need mlx4_en_recover_from_oom() and the service_task firing every 250 ms. Fixes: 31c128b6 ("net/mlx4_en: Choose time-stamping shift value according to HW frequency") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Eugenia Emantayev <eugenia@mellanox.com> Reviewed-by:
-
Emmanuel Grumbach authored
[ Upstream commit d98937f4 ] iwlwifi now supports RSS and can't let mac80211 track the PS state based on the Rx frames since they can come out of order. iwlwifi is now advertising AP_LINK_PS, and uses explicit notifications to teach mac80211 about the PS state of the stations and the PS poll / uAPSD trigger frames coming our way from the peers. Because of that, the TIM stopped being maintained in mac80211. I tried to fix this in commit c68df2e7 ("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE") but that was later reverted by Felix in commit 6c18a6b4 ("Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE") since it broke drivers that do not implement set_tim. Since none of the drivers that set AP_LINK_PS have the set_tim() handler set besides iwlwifi, I can bail out in __sta_info_recalc_tim if AP_LINK_PS AND .set_tim is not implemented. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 6f437d43 ] Commit 653d2ffd6405 ("qed*: Fix link indication race") introduced another race - one of the inner functions called from the link-change flow is explicitly using the slowpath context dedicated PTT instead of gaining that PTT from the caller. Since this flow can now be called from a different context as well, we're in risk of the PTT breaking. Fixes: 653d2ffd6405 ("qed*: Fix link indication race") Signed-off-by:
-
Vinod Koul authored
[ Upstream commit 126cfa2f ] Geminilake HDMI codec 0x280d is similar to previous platforms, so add it with similar ops as previous. Signed-off-by:
Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit ff4dd73d ] Unfortunately, the nla policy was defined to have HWSIM_ATTR_RADIO_NAME as an NLA_STRING, rather than NLA_NUL_STRING, so we can't use it as a NUL-terminated string in the kernel. Rather than break the API, kasprintf() the string to a new buffer to guarantee NUL termination. Reported-by:
Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by:
-
Lokesh Vutla authored
[ Upstream commit 08865514 ] Commit 4a9d4b02 ("switch fput to task_work_add") implements a schedule_work() for completing fput(), but did not guarantee calling __fput() after unpacking initramfs. Because of this, there is a possibility that during boot a driver can see ETXTBSY when it tries to load a binary from initramfs as fput() is still pending on that binary. This patch makes sure that fput() is completed after unpacking initramfs and removes the call to flush_delayed_fput() in kernel_init() which happens very late after unpacking initramfs. Link: http://lkml.kernel.org/r/20170201140540.22051-1-lokeshvutla@ti.comSigned-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Reported-by:
Murali Karicheri <m-karicheri2@ti.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
-
Franck Demathieu authored
[ Upstream commit b28ace12 ] The max and entry variables are unsigned according to the dt-bindings. Fix following 3 sparse issues (-Wtypesign): drivers/irqchip/irq-crossbar.c:222:52: warning: incorrect type in argument 3 (different signedness) drivers/irqchip/irq-crossbar.c:222:52: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:222:52: got int *<noident> drivers/irqchip/irq-crossbar.c:245:56: warning: incorrect type in argument 4 (different signedness) drivers/irqchip/irq-crossbar.c:245:56: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:245:56: got int *<noident> drivers/irqchip/irq-crossbar.c:263:56: warning: incorrect type in argument 4 (different signedness) drivers/irqchip/irq-crossbar.c:263:56: expected unsigned int [usertype] *out_value drivers/irqchip/irq-crossbar.c:263:56: got int *<noident> Signed-off-by:
Franck Demathieu <fdemathieu@gmail.com> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/20170223094855.6546-1-fdemathieu@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 3736d4eb ] gcc-4.3 can't decide whether the constant value in kempld_prescaler[PRESCALER_21] is built-time constant or not, and gets confused by the logic in do_div(): drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout': kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod' This adds a call to ACCESS_ONCE() to force it to not consider it to be constant, and leaves the more efficient normal case in place for modern compilers, using an #ifdef to annotate why we do this hack. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 7fb4a2ce ] Boqun reported that hlock->references can overflow. Add a debug test for that to generate a clear error when this happens. Without this, lockdep is likely to report a mysterious failure on unlock. Reported-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
-
Anoob Soman authored
[ Upstream commit 9f674e48 ] Allocation of new_hash, inside xenvif_new_hash(), always happen in softirq context, so use GFP_ATOMIC instead of GFP_KERNEL for new hash allocation. Signed-off-by:
Anoob Soman <anoob.soman@citrix.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit eb4375e1 which was commit f507b54d upstream. Ben reports: That function doesn't exist here (it was introduced in 4.13). Instead, this backport has modified bsg_create_job(), creating a leak. Please revert this on the 3.18, 4.4 and 4.9 stable branches. So I'm dropping it from here. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
-
Matt Redfearn authored
commit 5fdc66e0 upstream. Commit db8466c5 ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack") erroneously set the initial stack pointer of the IRQ stack to a value with a 4 byte alignment. The MIPS32 ABI requires that the minimum stack alignment is 8 byte, and the MIPS64 ABIs(n32/n64) require 16 byte minimum alignment. Fix IRQ_STACK_START such that it leaves space for the dummy stack frame (containing interrupted task kernel stack pointer) while also meeting minimum alignment requirements. Fixes: db8466c5 ("MIPS: IRQ Stack: Unwind IRQ stack onto task stack") Reported-by:
Darius Ivanauskas <dasilt@yahoo.com> Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Jason A. Donenfeld <jason@zx2c4.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16760/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
- 18 Oct, 2017 6 commits
-
-
Greg Kroah-Hartman authored
-
Ladi Prosek authored
commit fd19d3b4 upstream. The function updates context->root_level but didn't call update_last_nonleaf_level so the previous and potentially wrong value was used for page walks. For example, a zero value of last_nonleaf_level would allow a potential out-of-bounds access in arch/x86/mmu/paging_tmpl.h's walk_addr_generic function (CVE-2017-12188). Fixes: 155a97a3Signed-off-by:
Ladi Prosek <lprosek@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Mathias Krause authored
commit 6b32c126 upstream. The alt_max_short() macro in asm/alternative.h does not work as intended, leading to nasty bugs. E.g. alt_max_short("1", "3") evaluates to 3, but alt_max_short("3", "1") evaluates to 1 -- not exactly the maximum of 1 and 3. In fact, I had to learn it the hard way by crashing my kernel in not so funny ways by attempting to make use of the ALTENATIVE_2 macro with alternatives where the first one was larger than the second one. According to [1] and commit dbe4058a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") the right handed side should read "-(-(a < b))" not "-(-(a - b))". Fix that, to make the macro work as intended. While at it, fix up the comments regarding the additional "-", too. It's not about gas' usage of s32 but brain dead logic of having a "true" value of -1 for the < operator ... *sigh* Btw., the one in asm/alternative-asm.h is correct. And, apparently, all current users of ALTERNATIVE_2() pass same sized alternatives, avoiding to hit the bug. [1] http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMaxReviewed-and-tested-by:
Borislav Petkov <bp@suse.de> Fixes: dbe4058a ("x86/alternatives: Fix ALTERNATIVE_2 padding generation properly") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
-
Johan Hovold authored
commit 299d7572 upstream. Make sure to reset the USB-console port pointer when console setup fails in order to avoid having the struct usb_serial be prematurely freed by the console code when the device is later disconnected. Fixes: 73e487fd ("[PATCH] USB console: fix disconnection issues") Acked-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Shrirang Bagul authored
commit f5d9644c upstream. Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74 series which will by default boot with vid 0x413c and pid's 0x81cf, 0x81d0, 0x81d1, 0x81d2. Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Henryk Heisig authored
commit 837ddc47 upstream. This commit adds support for TP-Link LTE mPCIe module is used in in TP-Link MR200v1, MR6400v1 and v2 routers. Signed-off-by:
Henryk Heisig <hyniu@o2.pl> Signed-off-by:
-
