- 26 Mar, 2020 4 commits
-
-
Chris Wilson authored
Abuse^W Take advantage that we know we are inside the GT wakeref and that prevents any client execbuf from reopening the i915_vma in order to claim all the vma to close without having to drop the spinlock to free each one individually. By keeping the spinlock, we do not have to restart if we run concurrently with i915_gem_free_objects -- which causes them both to restart continually and make very very slow progress. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361 Fixes: 77853186 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk (cherry picked from commit 3447c4c5) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
If we park/unpark faster than we can respond to RPS events, we never will process a downclock event after expiring a waitboost, and thus we will forever restart the GPU at max clocks even if the workload switches and doesn't justify full power. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500 Fixes: 3e7abf81 ("drm/i915: Extract GT render power state management") Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk Cc: <stable@vger.kernel.org> # v5.5+ (cherry picked from commit 21abf0bf) Signed-off-by:
-
Chris Wilson authored
Use the restored ability to check if a context is closed to decide whether or not to immediately ban the context from further execution after a hang. Fixes: be90e344 ("drm/i915/gt: Cancel banned contexts after GT reset") Signed-off-by:
-
Chris Wilson authored
I need to keep the GEM context around a bit longer so adding an explicit flag for syncing execbuf with closed/abandonded contexts. v2: * Use already available context flags. (Chris) Signed-off-by:
-
- 20 Mar, 2020 5 commits
-
-
Umesh Nerlige Ramappa authored
On running several back to back perf capture sessions involving closing and opening the perf stream, invalid OA reports are seen in the beginning of the OA buffer in some sessions. Fix this by invalidating OA TLB when the perf stream is closed or disabled on gen12. Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL") Signed-off-by:
-
Chris Wilson authored
Beware that the context may already be closed as we try to lookup an engine. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1389 Fixes: 130a95e9 ("drm/i915/gem: Consolidate ctx->engines[] release") Signed-off-by:
-
Chris Wilson authored
The residual w/a batch is causing system instablity on Ivybridge and Baytrail under some workloads, so disable until resolved. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1405 Fixes: 47f8253d ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
https://github.com/ckhu-mediatek/linux.git-tagsDave Airlie authored
Mediatek DRM Next for Linux 5.7 This include MT8183 DPI support. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/1584580683.29614.5.camel@mtksdaap41
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.7-2020-03-19: amdgpu: - SR-IOV fixes - RAS fixes - Fallthrough cleanups - Kconfig fix for ACP - Fix load balancing with VCN - DC fixes - GPU reset fixes - Various cleanups scheduler: - Revert job distribution optimization - Add a helper to pick the least loaded scheduler Signed-off-by:
-
- 19 Mar, 2020 31 commits
-
-
Colin Ian King authored
There are spelling mistakes in pr_err messages and a comment. Fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Nathan Chancellor authored
clang warns: drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:6: warning: variable 'shadow' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] if (offset == grbm_cntl || offset == grbm_idx) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:757:6: note: uninitialized use occurs here if (shadow) { ^~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:754:2: note: remove the 'if' if its condition is always true if (offset == grbm_cntl || offset == grbm_idx) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:738:13: note: initialize the variable 'shadow' to silence this warning bool shadow; ^ = 0 1 warning generated. shadow is only assigned in one condition and used as the condition for another if statement; combine the two if statements and remove shadow to make the code cleaner and resolve this warning. Fixes: 2e0cc4d4 ("drm/amdgpu: revise RLCG access path") Link: https://github.com/ClangBuiltLinux/linux/issues/936Suggested-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
James Zhu authored
fix typo for vcn2.5/jpeg2.5 idle check Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
James Zhu authored
fix typo for vcn2/jpeg2 idle check Signed-off-by:
-
James Zhu authored
fix typo for vcn1 idle check Signed-off-by:
-
Zhigang Luo authored
The CAP fw is for enabling driver compatibility. Currently, it only enabled for vega10 VF. Signed-off-by:
Zhigang Luo <zhigang.luo@amd.com> Reviewed-by:
Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by:
-
John Clements authored
issue smu cmd to disable all features upon baco entry for arcturus to mitigate potential dirty I2C controller on boot Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
Yintian Tao authored
Originally, only the PTE valid is taken in consider. The PRT case is missied when bo update which raise problem. We need add condition for PRT case. v2: add PRT condition for amdgpu_vm_bo_update_mapping, too v3: fix one typo error Signed-off-by:
Yintian Tao <yttao@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dmytro Laktyushkin authored
Adds logic that will determine if pipes need merging during validation. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Wyatt Wood authored
[Why] The scratch space can be used to pass data between x86 and DMCUB. DMCUB will manage the actually mapping of CW7 internally, driver does not program the window. [How] Allocate extra space within the DMUB service's framebuffer for this scratch space and expose them from the service for use in DC. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why] before update dpp DTO, we check dppclks in context to determine it is changed or not, but dppclks in context will be updated anyways after flip is done, so compare dppclks in context will always get an equal result. [How] Add pipe dpp clks in dccg and compare values between dccg and context. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
-
Nikola Cornij authored
[why] Causes regression with MST DSC displays not lighting up after DPMS [how] Revert commit 8cc426d7 ("drm/amd/display: Program DSC during timing programming") Signed-off-by:
Nikola Cornij <nikola.cornij@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why] underflow happened when playing video on 1366x768 + 4K clone mode due to incorrect handle watermark change flag and lower down clocks to early. [How] Check watermark change flag when decide doing optimized, and check optimized required flag to do clock update. Signed-off-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
-
Charlene Liu authored
[why] this register not exist in some asic, based on request remove this from dc. [how] add guard for sanization. Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Reviewed-by:
-
Martin Tsai authored
[Why] We should check MST BU support capability on output port before building vsc info packet. [How] Add a new definition for port and sink capability check. Signed-off-by:
Martin Tsai <martin.tsai@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Sung Lee authored
[WHY] In headless boot cases, self refresh control registers are not programmed on boot. In certain hybrid graphics cases this may cause cstate entering to get blocked causing a hang. [HOW] Program self refresh control register on boot. Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Wenjing Liu authored
[why] DP doesn't have message id as the first byte of an hdcp message, current hdcp psp unifies HDMI and DP message so that it is required when reading DP HDCP messages in hdcp_ddc, a message id needs to be added as the first byte of the HDCP message. The id is currently assigned as a magic number which is not a good coding practice. [how] Replace magic numbers with macro defined in hdcp headers. Signed-off-by:
Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by:
-
Wyatt Wood authored
[Why] We want to be able to enable/disable psr on dmcub and fallback to dmcu when necessary. [How] Use dc config option to do so. Signed-off-by:
-
Wyatt Wood authored
[Why] The default value for disable_dmcu is true, even for asics that require dmcu. [How] Set flag properly per asic. Signed-off-by:
-
Roman Li authored
[Why] The PSR enablement was dependent on swizzle as a workaround for non-pageflipping fb console. It's no longer required. [How] Remove PSR-enable dependency on swizzle mode. Signed-off-by:
Roman Li <roman.li@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] This is enabled by default on Renoir but there's userspace/API support to actually make use of this. Since we're not passing this down through surface updates, let's explicitly disable this for now. This fixes "dcn20_program_front_end_for_ctx" warnings associated with incorrect/unexpected programming sequences performed while this is enabled. [How] Disable it at the topmost level in DM in case anyone tries to flip this to enabled for any of the other ASICs like Navi10/14. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] A "dcn20_program_front_end_for_ctx" warning is observed on Renoir. Since the resource definition doesn't explicitly disable triplebuffer flips like Navi10 DC actually attempts to go and setup triplebuffering even when we pass in false to the plane state. If we hit a full update after triplebuffering has been setup we see the assertion since we don't expect full updates while performing triplebuffer flips. Normally this would get reset back to false whne we pass in the new plane state, but since we never actually copy the flag when doing surface updates this doesn't happen. [How] Copy the flag onto the plane update based on the requested surface update state. Signed-off-by:
-
Dmytro Laktyushkin authored
Right now only stream count is used to avoid split. This change updates the W/A to check plane count instead. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by:
-
Yongqiang Sun authored
[Why] When hotplug a HDMI monitor during entering S0i3 or DPMSOFF state due to entering infinite loop when calling vbios to program pixel clocks. In this scenario, pll is enabled but phy is not, and there is not a programing guide for this case. [How] Before we having the proper programing guide, before disable pll, doing a phy enable and disable to avoid the issue. Signed-off-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Isabel Zhang authored
[Why] Due to previous code changes displays which are in active state immediately transition to the active and added state. This makes the two states redundant and unnecessary. [How] Instead of updating the device state to active and added after successful addition, change state to inactive if addition failed. Also, change references to active and added state to just added state. Signed-off-by:
Isabel Zhang <isabel.zhang@amd.com> Reviewed-by:
-
Jerry (Fangzhi) Zuo authored
[why] When reprogram MSA with updated color space, the test color space shows inconsistency. Linux has separate routine to set up test pattern color space, but it fails to configure RGB. [How] Add RGB to test pattern. Fixes: 43563bc2 ("drm/amd/display: update MSA and VSC SDP on video test pattern request") Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Hersen Wu authored
[Why] drm_connector->display_info is not passed to amdgpu_dm right way after read edid. [How] display_info is parsed from edid and saved into drm_connector by drm_connector_update_edid_proerty which is called within amdgpu_dm_update_connector_after_detect. call this function after read edid to update drm_connector->display_info Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
-
Sung Lee authored
[WHY] Not programming dto with same values causes test failures in DCN2 diags DPP tests. [HOW] This reverts commit 1b53e733. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two cleanups . Replace the hand rolled encoder bitmask thing with drm_encoder_mask() . Use mode->clock instead of reverse calculating it from the vrefresh Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: - dp-mst: Remove register_connector callback, add drm_dp_destroy_connector - Changes to scnprintf on multiple instances Driver Changes: - meson: Support for YUV420 - panel: Support Ortustech COM37H3M, idk-1110wr and idk-2121wr, multiple dotclock fixes Signed-off-by: -
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
- Disable DMA when using SEV encryption - An -RT fix - Code cleanups Signed-off-by:
-
