- 19 Jul, 2017 1 commit
-
-
Shu Wang authored
Found this issue by kmemleak report, auditd_send_unicast_skb did not free skb if rcu_dereference(auditd_conn) returns null. unreferenced object 0xffff88082568ce00 (size 256): comm "auditd", pid 1119, jiffies 4294708499 backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121820c>] kmem_cache_alloc_node+0xcc/0x210 [<ffffffff8161b99d>] __alloc_skb+0x5d/0x290 [<ffffffff8113c614>] audit_make_reply+0x54/0xd0 [<ffffffff8113dfa7>] audit_receive_msg+0x967/0xd70 ---------------- (gdb) list *audit_receive_msg+0x967 0xffffffff8113dff7 is in audit_receive_msg (kernel/audit.c:1133). 1132 skb = audit_make_reply(0, AUDIT_REPLACE, 0, 0, &pvnr, sizeof(pvnr)); --------------- [<ffffffff8113e402>] audit_receive+0x52/0xa0 [<ffffffff8166c561>] netlink_unicast+0x181/0x240 [<ffffffff8166c8e2>] netlink_sendmsg+0x2c2/0x3b0 [<ffffffff816112e8>] sock_sendmsg+0x38/0x50 [<ffffffff816117a2>] SYSC_sendto+0x102/0x190 [<ffffffff81612f4e>] SyS_sendto+0xe/0x10 [<ffffffff8176d337>] entry_SYSCALL_64_fastpath+0x1a/0xa5 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:Shu Wang <shuwang@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com>
-
- 16 Jun, 2017 1 commit
-
-
Paul Moore authored
When the auditd connection is reset, either intentionally or due to a failure, any records that were in the main backlog queue would not be sent in a multicast broadcast. This patch fixes this problem by not flushing the main backlog queue on a connection reset, the main kauditd_thread() will take care of that normally. Resolves: https://github.com/linux-audit/audit-kernel/issues/41Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
-
- 13 Jun, 2017 1 commit
-
-
Paul Moore authored
Originally reported by Adam and Dusty, it appears we have a small race window in kauditd_thread(), as documented in the Fedora BZ: * https://bugzilla.redhat.com/show_bug.cgi?id=1459326#c35 "This issue is partly due to the read-copy nature of RCU, and partly due to how we sync the auditd_connection state across kauditd_thread and the audit control channel. The kauditd_thread thread is always running so it can service the record queues and emit the multicast messages, if it happens to be just past the "main_queue" label, but before the "if (sk == NULL || ...)" if-statement which calls auditd_reset() when the new auditd connection is registered it could end up resetting the auditd connection, regardless of if it is valid or not. This is a rather small window and the variable nature of multi-core scheduling explains why this is proving rather difficult to reproduce." The fix is to have functions only call auditd_reset() when they believe that the kernel/auditd connection is still valid, e.g. non-NULL, and to have these callers pass their local copy of the auditd_connection pointer to auditd_reset() where it can be compared with the current connection state before resetting. If the caller has a stale state tracking pointer then the reset is ignored. We also make a small change to kauditd_thread() so that if the kernel/auditd connection is dead we skip the retry queue and send the records straight to the hold queue. This is necessary as we used to rely on auditd_reset() to occasionally purge the retry queue but we are going to be calling the reset function much less now and we want to make sure the retry queue doesn't grow unbounded. Reported-by:
Adam Williamson <awilliam@redhat.com> Reported-by:
Dusty Mabe <dustymabe@redhat.com> Reviewed-by:
-
- 12 Jun, 2017 1 commit
-
-
Derek Robson authored
Fixed checkpatch.pl warnings of "function definition argument FOO should also have an identifier name" Signed-off-by:
Derek Robson <robsonde@gmail.com> Reviewed-by:
-
- 30 May, 2017 1 commit
-
-
Richard Guy Briggs authored
Capabilities were augmented to include ambient capabilities in v4.3 commit 58319057 ("capabilities: ambient capabilities"). Add ambient capabilities to the audit BPRM_FCAPS and CAPSET records. The record contains fields "old_pp", "old_pi", "old_pe", "new_pp", "new_pi", "new_pe" so in keeping with the previous record normalizations, change the "new_*" variants to simply drop the "new_" prefix. A sample of the replaced BPRM_FCAPS record: RAW: type=BPRM_FCAPS msg=audit(1491468034.252:237): fver=2 fp=0000000000200000 fi=0000000000000000 fe=1 old_pp=0000000000000000 old_pi=0000000000000000 old_pe=0000000000000000 old_pa=0000000000000000 pp=0000000000200000 pi=0000000000000000 pe=0000000000200000 pa=0000000000000000 INTERPRET: type=BPRM_FCAPS msg=audit(04/06/2017 04:40:34.252:237): fver=2 fp=sys_admin fi=none fe=chown old_pp=none old_pi=none old_pe=none old_pa=none pp=sys_admin pi=none pe=sys_admin pa=none A sample of the replaced CAPSET record: RAW: type=CAPSET msg=audit(1491469502.371:242): pid=833 cap_pi=0000003fffffffff cap_pp=0000003fffffffff cap_pe=0000003fffffffff cap_pa=0000000000000000 INTERPRET: type=CAPSET msg=audit(04/06/2017 05:05:02.371:242) : pid=833 cap_pi=chown,dac_override,dac_read_search,fowner,fsetid,kill, setgid,setuid,setpcap,linux_immutable,net_bind_service,net_broadcast, net_admin,net_raw,ipc_lock,ipc_owner,sys_module,sys_rawio,sys_chroot, sys_ptrace,sys_pacct,sys_admin,sys_boot,sys_nice,sys_resource,sys_time, sys_tty_config,mknod,lease,audit_write,audit_control,setfcap, mac_override,mac_admin,syslog,wake_alarm,block_suspend,audit_read cap_pp=chown,dac_override,dac_read_search,fowner,fsetid,kill,setgid, setuid,setpcap,linux_immutable,net_bind_service,net_broadcast, net_admin,net_raw,ipc_lock,ipc_owner,sys_module,sys_rawio,sys_chroot, sys_ptrace,sys_pacct,sys_admin,sys_boot,sys_nice,sys_resource, sys_time,sys_tty_config,mknod,lease,audit_write,audit_control,setfcap, mac_override,mac_admin,syslog,wake_alarm,block_suspend,audit_read cap_pe=chown,dac_override,dac_read_search,fowner,fsetid,kill,setgid, setuid,setpcap,linux_immutable,net_bind_service,net_broadcast, net_admin,net_raw,ipc_lock,ipc_owner,sys_module,sys_rawio,sys_chroot, sys_ptrace,sys_pacct,sys_admin,sys_boot,sys_nice,sys_resource, sys_time,sys_tty_config,mknod,lease,audit_write,audit_control,setfcap, mac_override,mac_admin,syslog,wake_alarm,block_suspend,audit_read cap_pa=none See: https://github.com/linux-audit/audit-kernel/issues/40Signed-off-by:
Serge Hallyn <serge@hallyn.com> Signed-off-by:
-
- 23 May, 2017 1 commit
-
-
Richard Guy Briggs authored
The cap_* fields swing in and out of PATH records. If no capabilities are set, the cap_* fields are completely missing and when one of the cap_fi or cap_fp values is empty, that field is omitted. Original: type=PATH msg=audit(04/20/2017 12:17:11.222:193) : item=1 name=/lib64/ld-linux-x86-64.so.2 inode=787694 dev=08:03 mode=file,755 ouid=root ogid=root rdev=00:00 obj=system_u:object_r:ld_so_t:s0 nametype=NORMAL type=PATH msg=audit(04/20/2017 12:17:11.222:193) : item=0 name=/home/sleep inode=1319469 dev=08:03 mode=file,suid,755 ouid=root ogid=root rdev=00:00 obj=system_u:object_r:bin_t:s0 nametype=NORMAL cap_fp=sys_admin cap_fe=1 cap_fver=2 Normalize the PATH record by always printing all 4 cap_* fields. Fixed: type=PATH msg=audit(04/20/2017 13:01:31.679:201) : item=1 name=/lib64/ld-linux-x86-64.so.2 inode=787694 dev=08:03 mode=file,755 ouid=root ogid=root rdev=00:00 obj=system_u:object_r:ld_so_t:s0 nametype=NORMAL cap_fp=none cap_fi=none cap_fe=0 cap_fver=0 type=PATH msg=audit(04/20/2017 13:01:31.679:201) : item=0 name=/home/sleep inode=1319469 dev=08:03 mode=file,suid,755 ouid=root ogid=root rdev=00:00 obj=system_u:object_r:bin_t:s0 nametype=NORMAL cap_fp=sys_admin cap_fi=none cap_fe=1 cap_fver=2 See: https://github.com/linux-audit/audit-kernel/issues/42Signed-off-by:
-
- 02 May, 2017 14 commits
-
-
Paul Moore authored
Cong Wang correctly pointed out that the RCU read locking of the auditd_connection struct was wrong, this patch correct this by adopting a more traditional, and correct RCU locking model. This patch is heavily based on an earlier prototype by Cong Wang. Cc: <stable@vger.kernel.org> # 4.11.x- Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Paul Moore authored
The audit subsystem implemented its own buffer cache mechanism which is a bit silly these days when we could use the kmem_cache construct. Some credit is due to Florian Westphal for originally proposing that we remove the audit cache implementation in favor of simple kmalloc()/kfree() calls, but I would rather have a dedicated slab cache to ease debugging and future stats/performance work. Cc: Florian Westphal <fw@strlen.de> Reviewed-by:
-
Deepa Dinamani authored
struct timespec is not y2038 safe. Audit timestamps are recorded in string format into an audit buffer for a given context. These mark the entry timestamps for the syscalls. Use y2038 safe struct timespec64 to represent the times. The log strings can handle this transition as strings can hold upto 1024 characters. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Paul Moore authored
This is arguably the right thing to do, and will make it easier when we start supporting multiple audit daemons in different namespaces. Signed-off-by: -
Paul Moore authored
We were setting the portid incorrectly in the netlink message headers, fix that to always be 0 (nlmsg_pid = 0). Signed-off-by:
-
Paul Moore authored
There is no reason to have both of these functions, combine the two. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> [PM: fix subject line, add #include] Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Richard Guy Briggs authored
Eliminate flipping in and out of message fields, dropping fields in the process. Sample raw message format IPv4 UDP: type=NETFILTER_PKT msg=audit(1487874761.386:228): mark=0xae8a2732 saddr=127.0.0.1 daddr=127.0.0.1 proto=17^] Sample raw message format IPv6 ICMP6: type=NETFILTER_PKT msg=audit(1487874761.381:227): mark=0x223894b7 saddr=::1 daddr=::1 proto=58^] Issue: https://github.com/linux-audit/audit-kernel/issues/11 Test case: https://github.com/linux-audit/audit-testsuite/issues/43Signed-off-by:
-
Richard Guy Briggs authored
Even though the skb->data pointer has been moved from the link layer header to the network layer header, use the same method to calculate the offset in ipv4 and ipv6 routines. Signed-off-by:
-
Richard Guy Briggs authored
When a sysadmin wishes to monitor module unloading with a syscall rule such as: -a always,exit -F arch=x86_64 -S delete_module -F key=mod-unload the SYSCALL record doesn't tell us what module was requested for unloading. Use the new KERN_MODULE auxiliary record to record it. The SYSCALL record result code will list the return code. See: https://github.com/linux-audit/audit-kernel/issues/37 https://github.com/linux-audit/audit-kernel/issues/7 https://github.com/linux-audit/audit-kernel/wiki/RFE-Module-Load-Record-FormatSigned-off-by:
Jessica Yu <jeyu@redhat.com> Signed-off-by:
-
Nicholas Mc Guire authored
The excess ; after the closing parenthesis is just code-noise it has no and can be removed. Signed-off-by:
Nicholas Mc Guire <der.herr@hofr.at> [PM: tweaked subject line] Signed-off-by:
-
Nicholas Mc Guire authored
The excess ; after the closing parenthesis is just code-noise it has no and can be removed. Signed-off-by:
-
Nicholas Mc Guire authored
The excess ; after the closing parenthesis is just code-noise it has no and can be removed. Signed-off-by:
-
- 01 May, 2017 1 commit
-
-
Linus Torvalds authored
-
- 30 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "The final fixes for 4.11: - prevent a triple fault with function graph tracing triggered via suspend to ram - prevent optimizing for size when function graph tracing is enabled and the compiler does not support -mfentry - prevent mwaitx() being called with a zero timeout as mwaitx() might never return. Observed on the new Ryzen CPUs" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Prevent timer value 0 for MWAITX x86/build: convert function graph '-Os' error to warning ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single fix for a cputime accounting regression which got introduced in the 4.11 cycle" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix ksoftirqd cputime accounting regression
-
Janakarajan Natarajan authored
Newer hardware has uncovered a bug in the software implementation of using MWAITX for the delay function. A value of 0 for the timer is meant to indicate that a timeout will not be used to exit MWAITX. On newer hardware this can result in MWAITX never returning, resulting in NMI soft lockup messages being printed. On older hardware, some of the other conditions under which MWAITX can exit masked this issue. The AMD APM does not currently document this and will be updated. Please refer to http://marc.info/?l=kvm&m=148950623231140 for information regarding NMI soft lockup messages on an AMD Ryzen 1800X. This has been root-caused as a 0 passed to MWAITX causing it to wait indefinitely. This change has the added benefit of avoiding the unnecessary setup of MONITORX/MWAITX when the delay value is zero. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1493156643-29366-1-git-send-email-Janakarajan.Natarajan@amd.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 29 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull iov iter fix from Al Viro. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a braino in ITER_PIPE iov_iter_revert()
-
Al Viro authored
Fixes: 27c0e374Tested-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One odd config build fix for a recent Allwinner clock driver change that got merged. The common code called code in another file that wasn't always built. This just forces it on so people don't run into this bad configuration" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: always select CCU_GATE
-
- 28 Apr, 2017 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a couple more stragglers, I really hope this is it. 1) Don't let frags slip down into the GRO segmentation handlers, from Steffen Klassert. 2) Truesize under-estimation triggers warnings in TCP over loopback with socket filters, 2 part fix from Eric Dumazet. 3) Fix undesirable reset of bonding MTU to ETH_HLEN on slave removal, from Paolo Abeni. 4) If we flush the XFRM policy after garbage collection, it doesn't work because stray entries can be created afterwards. Fix from Xin Long. 5) Hung socket connection fixes in TIPC from Parthasarathy Bhuvaragan. 6) Fix GRO regression with IPSEC when netfilter is disabled, from Sabrina Dubroca. 7) Fix cpsw driver Kconfig dependency regression, from Arnd Bergmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: hso: register netdev later to avoid a race condition net: adjust skb->truesize in ___pskb_trim() tcp: do not underestimate skb->truesize in tcp_trim_head() bonding: avoid defaulting hard_header_len to ETH_HLEN on slave removal ipv4: Don't pass IP fragments to upper layer GRO handlers. cpsw/netcp: refine cpts dependency tipc: close the connection if protocol messages contain errors tipc: improve error validations for sockets in CONNECTING state tipc: Fix missing connection request handling xfrm: fix GRO for !CONFIG_NETFILTER xfrm: do the garbage collection after flushing policy -
Andreas Kemnade authored
If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket. As we did recently in commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()") we can adjust skb->truesize from ___pskb_trim(), via a call to skb_condense(). If all frags were freed, then skb->truesize can be recomputed. This call can be done if skb is not yet owned, or destructor is sock_edemux(). Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Eric Dumazet authored
Andrey found a way to trigger the WARN_ON_ONCE(delta < len) in skb_try_coalesce() using syzkaller and a filter attached to a TCP socket over loopback interface. I believe one issue with looped skbs is that tcp_trim_head() can end up producing skb with under estimated truesize. It hardly matters for normal conditions, since packets sent over loopback are never truncated. Bytes trimmed from skb->head should not change skb truesize, since skb->head is not reallocated. Signed-off-by:
-
Paolo Abeni authored
On slave list updates, the bonding driver computes its hard_header_len as the maximum of all enslaved devices's hard_header_len. If the slave list is empty, e.g. on last enslaved device removal, ETH_HLEN is used. Since the bonding header_ops are set only when the first enslaved device is attached, the above can lead to header_ops->create() being called with the wrong skb headroom in place. If bond0 is configured on top of ipoib devices, with the following commands: ifup bond0 for slave in $BOND_SLAVES_LIST; do ip link set dev $slave nomaster done ping -c 1 <ip on bond0 subnet> we will obtain a skb_under_panic() with a similar call trace: skb_push+0x3d/0x40 push_pseudo_header+0x17/0x30 [ib_ipoib] ipoib_hard_header+0x4e/0x80 [ib_ipoib] arp_create+0x12f/0x220 arp_send_dst.part.19+0x28/0x50 arp_solicit+0x115/0x290 neigh_probe+0x4d/0x70 __neigh_event_send+0xa7/0x230 neigh_resolve_output+0x12e/0x1c0 ip_finish_output2+0x14b/0x390 ip_finish_output+0x136/0x1e0 ip_output+0x76/0xe0 ip_local_out+0x35/0x40 ip_send_skb+0x19/0x40 ip_push_pending_frames+0x33/0x40 raw_sendmsg+0x7d3/0xb50 inet_sendmsg+0x31/0xb0 sock_sendmsg+0x38/0x50 SYSC_sendto+0x102/0x190 SyS_sendto+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 This change addresses the issue avoiding updating the bonding device hard_header_len when the slaves list become empty, forbidding to shrink it below the value used by header_ops->create(). The bug is there since commit 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") but the panic can be triggered only since commit fc791b63 ("IB/ipoib: move back IB LL address into the hard header"). Reported-by:
Norbert P <noe@physik.uzh.ch> Fixes: 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Steffen Klassert authored
Upper layer GRO handlers can not handle IP fragments, so exit GRO processing in this case. This fixes ESP GRO because the packet must be reassembled before we can decapsulate, otherwise we get authentication failures. It also aligns IPv4 to IPv6 where packets with fragmentation headers are not passed to upper layer GRO handlers. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Arnd Bergmann authored
Tony Lindgren reports a kernel oops that resulted from my compile-time fix on the default config. This shows two problems: a) configurations that did not already enable PTP_1588_CLOCK will now miss the cpts driver b) when cpts support is disabled, the driver crashes. This is a preexisting problem that we did not notice before my patch. While the second problem is still being investigated, this modifies the dependencies again, getting us back to the original state, with another 'select NET_PTP_CLASSIFY' added in to avoid the original link error we got, and the 'depends on POSIX_TIMERS' to hide the CPTS support when turning it on would be useless. Cc: stable@vger.kernel.org # 4.11 needs this Fixes: 07fef362 ("cpsw/netcp: cpts depends on posix_timers") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-04-28 1) Do garbage collecting after a policy flush to remove old bundles immediately. From Xin Long. 2) Fix GRO if netfilter is not defined. From Sabrina Dubroca. Please pull or let me know if there are problems. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fix from Dmitry Torokhov: "Yet another quirk to i8042 to get touchpad recognized on some laptops" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Clevo P650RS to the i8042 reset list
-
Arnd Bergmann authored
When the base driver is enabled but all SoC specific drivers are turned off, we now get a build error after code was added to always refer to the clk gates: drivers/clk/built-in.o: In function `ccu_pll_notifier_cb': :(.text+0x154f8): undefined reference to `ccu_gate_helper_disable' :(.text+0x15504): undefined reference to `ccu_gate_helper_enable' This changes the Kconfig to always require the gate code to be built-in when CONFIG_SUNXI_CCU is set. Fixes: 02ae2bc6 ("clk: sunxi-ng: Add clk notifier to gate then ungate PLL clocks") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fix from Chris Mason: "We have one more fix for btrfs. This gets rid of a new WARN_ON from rc1 that ended up making more noise than we really want. The larger fix for the underflow got delayed a bit and it's better for now to put it under CONFIG_BTRFS_DEBUG" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: qgroup: move noisy underflow warning to debugging build
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: fix hanging socket connections This patch series contains fixes for the socket layer to prevent hanging / stale connections. ==================== Signed-off-by: -
Parthasarathy Bhuvaragan authored
When a socket is shutting down, we notify the peer node about the connection termination by reusing an incoming message if possible. If the last received message was a connection acknowledgment message, we reverse this message and set the error code to TIPC_ERR_NO_PORT and send it to peer. In tipc_sk_proto_rcv(), we never check for message errors while processing the connection acknowledgment or probe messages. Thus this message performs the usual flow control accounting and leaves the session hanging. In this commit, we terminate the connection when we receive such error messages. Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
