- 17 Feb, 2016 1 commit
-
-
Daniel Vetter authored
Pull in pile of patches from Carlos to remove now redundant mode_fixup hooks for encoders. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
- 16 Feb, 2016 17 commits
-
-
Carlos Palminha authored
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Carlos Palminha <palminha@synopsys.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/9d41105dee6632b4bb50e9555f2196ac249b9fce.1455630967.git.palminha@synopsys.com
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
Carlos Palminha authored
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by:
-
- 15 Feb, 2016 2 commits
-
-
Maarten Lankhorst authored
add_all_connectors doesn't checks whether reallocation is needed, but add_one does. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Maarten Lankhorst authored
The fb helper iterates over connectors, using fb_helper->num_connectors makes it more clear what size the allocations are. Signed-off-by:
-
- 14 Feb, 2016 1 commit
-
-
Rafael Antognolli authored
So far, the i915 driver and some other drivers set it to the drm_device, which doesn't allow one to know which DP a given aux channel is related to. Changing this to be the drm_connector provides proper nesting, still allowing one to get the drm_device from it. Some drivers already set it to the drm_connector. This also removes the need to add a sysfs link for the i2c device under the connector, as it will already be there. v9: - As a side effect, drm_dp_aux_unregister() must be called before intel_connector_unregister(), as both the aux.dev and the i2c adapter dev are children of the drm_connector device now. Calling drm_dp_aux_unregister() before prevents them from being destroyed twice. v10: - move aux_fini() to connector_unregister(), instead of moving drm_dp_aux_unregister() outside of connector_register(). Signed-off-by:
Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
- 12 Feb, 2016 3 commits
-
-
Daniel Vetter authored
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be used like following: - mmap dma-buf fd - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write to mmap area 3. SYNC_END ioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device) - munmap once you don't need the buffer any more v2 (Tiago): Fix header file type names (u64 -> __u64) v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end dma-buf functions. Check for overflows in start/length. v4 (Tiago): use 2d regions for sync. v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and remove range information from struct dma_buf_sync. v6 (Tiago): use __u64 structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls. v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage. v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include in dma-buf.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by:Stéphane Marchesin <marcheu@chromium.org> Signed-off-by:
Tiago Vignatti <tiago.vignatti@intel.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Rafael Antognolli authored
This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Rafael Antognolli authored
The module_init and module_exit functions will start here, and call the subsequent init's and exit's. v10: - Keep __init on drm_fb_helper init function. - Move MODULE_* macros to the common file. Signed-off-by:
-
- 11 Feb, 2016 6 commits
-
-
Arnd Bergmann authored
After the drm_device_is_unplugged() was removed, the 'dev' variable is now unused, and we get a warning for that: drivers/gpu/drm/msm/msm_fbdev.c: In function 'msm_fbdev_mmap': drivers/gpu/drm/msm/msm_fbdev.c:65:21: error: unused variable 'dev' [-Werror=unused-variable] This removes the variable as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: e9f8250f ("drm/msm: remove the drm_device_is_unplugged check") Signed-off-by:
-
Carlos Palminha authored
Other bridge drivers don't implement this optional function. Removed dummy code from dw-hdmi brigde driver. Signed-off-by:
-
Carlos Palminha authored
Removed dummy mode_fixup. Signed-off-by:
-
Carlos Palminha authored
Removed dummy mode_fixup. Signed-off-by:
-
Lukas Wunner authored
The DRM drivers i915, nouveau and radeon may be compiled with CONFIG_ACPI not set, in which case acpi_dev_present() is undefined. Add a no-op stub for apple_gmux_present() which is used if CONFIG_APPLE_GMUX is not enabled to avoid build breakage. (CONFIG_APPLE_GMUX depends on CONFIG_ACPI.) Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Carlos Palminha authored
Avoids null crash when encoders don't implement mode_fixup. Signed-off-by:
-
- 10 Feb, 2016 2 commits
-
-
Carlos Palminha authored
Avoid i2c slave encoder drivers to copy/paste code to implement functions that will only return true. Signed-off-by:
-
Rasmus Villemoes authored
The current code fails to call i2c_del_adapter on dev_prev->gmbus[0].adapter, and if the for loop above failed already at i==0, all hell breaks loose when we do the loop body for i = -1,-2,... Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-2-git-send-email-linux@rasmusvillemoes.dkReviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
- 09 Feb, 2016 8 commits
-
-
Ville Syrjälä authored
Add a few helpers to get the dimensions of the chroma plane(s). v2: Add kernel-doc (Daniel) v3: Fix kerneldoc "Returns:" style (Daniel) Uninline the functions and check for num_planes (Daniel) v4: Add the required EXPORT_SYMBOL()s Cc: dri-devel@lists.freedesktop.org Signed-off-by: -
Haixia Shi authored
This flag is only used for drm/udl. Signed-off-by:
Haixia Shi <hshi@chromium.org> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
LABBE Corentin authored
The warning message in drm_mode_parse_command_line_for_connector miss the [drm] at beginning. This patch add it and take the opportunity to convert printk(KERN_WARNING to pr_warn() Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
Insu Yun authored
Since drm_property_create_range can be failed in memory pressure, it needs to be checked and return -ENOMEM. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
Lukas Wunner authored
gmux is a microcontroller built into dual GPU MacBook Pros. On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux to temporarily switch DDC so that we can probe the panel's EDID. The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary because if either of them is disabled but gmux is present, the driver would never load, even if we're the active GPU. (vga_default_device() would evaluate to NULL and vga_switcheroo_handler_flags() would evaluate to 0.) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Signed-off-by:
-
Lukas Wunner authored
gmux is a microcontroller built into dual GPU MacBook Pros. On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux to temporarily switch DDC so that we can probe the panel's EDID. The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary because if either of them is disabled but gmux is present, the driver would never load, even if we're the active GPU. (vga_default_device() would evaluate to NULL and vga_switcheroo_handler_flags() would evaluate to 0.) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
-
Lukas Wunner authored
gmux is a microcontroller built into dual GPU MacBook Pros. On pre-retina MBPs, if we're the inactive GPU, we need apple-gmux to temporarily switch DDC so that we can probe the panel's EDID. The checks for CONFIG_VGA_ARB and CONFIG_VGA_SWITCHEROO are necessary because if either of them is disabled but gmux is present, the driver would never load, even if we're the active GPU. (vga_default_device() would evaluate to NULL and vga_switcheroo_handler_flags() would evaluate to 0.) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115Tested-by:
-
Lukas Wunner authored
Centralize gmux' ACPI HID in a header file and add apple_gmux_present(). This can be used by other drivers to activate quirks specific to dual GPU MacBook Pros & Mac Pros. The alternative would be to hardcode DMI or PCI IDs and amend them whenever Apple introduces a new machine. Tested-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
