- 28 Jan, 2013 5 commits
-
-
Oleg Nesterov authored
commit 910ffdb1 upstream. Cleanup and preparation for the next change. signal_wake_up(resume => true) is overused. None of ptrace/jctl callers actually want to wakeup a TASK_WAKEKILL task, but they can't specify the necessary mask. Turn signal_wake_up() into signal_wake_up_state(state), reintroduce signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up() which adds __TASK_TRACED. This way ptrace_signal_wake_up() can work "inside" ptrace_request() even if the tracee doesn't have the TASK_WAKEKILL bit set. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Kasatkin authored
commit a67adb99 upstream. The following lines of code produce a kernel oops. fd = socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0); fchmod(fd, 0666); [ 139.922364] BUG: unable to handle kernel NULL pointer dereference at (null) [ 139.924982] IP: [< (null)>] (null) [ 139.924982] *pde = 00000000 [ 139.924982] Oops: 0000 [#5] SMP [ 139.924982] Modules linked in: fuse dm_crypt dm_mod i2c_piix4 serio_raw evdev binfmt_misc button [ 139.924982] Pid: 3070, comm: acpid Tainted: G D 3.8.0-rc2-kds+ #465 Bochs Bochs [ 139.924982] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 [ 139.924982] EIP is at 0x0 [ 139.924982] EAX: cf5ef000 EBX: cf5ef000 ECX: c143d600 EDX: c15225f2 [ 139.924982] ESI: cf4d2a1c EDI: cf4d2a1c EBP: cc02df10 ESP: cc02dee4 [ 139.924982] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 139.924982] CR0: 80050033 CR2: 00000000 CR3: 0c059000 CR4: 000006d0 [ 139.924982] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 139.924982] DR6: ffff0ff0 DR7: 00000400 [ 139.924982] Process acpid (pid: 3070, ti=cc02c000 task=d7705340 task.ti=cc02c000) [ 139.924982] Stack: [ 139.924982] c1203c88 00000000 cc02def4 cf4d2a1c ae21eefa 471b60d5 1083c1ba c26a5940 [ 139.924982] e891fb5e 00000041 00000004 cc02df1c c1203964 00000000 cc02df4c c10e20c3 [ 139.924982] 00000002 00000000 00000000 22222222 c1ff2222 cf5ef000 00000000 d76efb08 [ 139.924982] Call Trace: [ 139.924982] [<c1203c88>] ? evm_update_evmxattr+0x5b/0x62 [ 139.924982] [<c1203964>] evm_inode_post_setattr+0x22/0x26 [ 139.924982] [<c10e20c3>] notify_change+0x25f/0x281 [ 139.924982] [<c10cbf56>] chmod_common+0x59/0x76 [ 139.924982] [<c10e27a1>] ? put_unused_fd+0x33/0x33 [ 139.924982] [<c10cca09>] sys_fchmod+0x39/0x5c [ 139.924982] [<c13f4f30>] syscall_call+0x7/0xb [ 139.924982] Code: Bad EIP value. This happens because sockets do not define the removexattr operation. Before removing the xattr, verify the removexattr function pointer is not NULL. Signed-off-by:
Dmitry Kasatkin <dmitry.kasatkin@intel.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Steven Rostedt authored
commit c1bf08ac upstream. If some other kernel subsystem has a module notifier, and adds a kprobe to a ftrace mcount point (now that kprobes work on ftrace points), when the ftrace notifier runs it will fail and disable ftrace, as well as kprobes that are attached to ftrace points. Here's the error: WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280() Hardware name: Bochs Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared] Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1 Call Trace: [<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70 [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffffa0180000>] ? 0xffffffffa017ffff [<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20 [<ffffffff810fd189>] ftrace_bug+0x239/0x280 [<ffffffff810fd626>] ftrace_process_locs+0x376/0x520 [<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50 [<ffffffff8163912d>] notifier_call_chain+0x4d/0x70 [<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80 [<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff810c2a23>] sys_init_module+0x73/0x220 [<ffffffff8163d719>] system_call_fastpath+0x16/0x1b ---[ end trace 9ef46351e53bbf80 ]--- ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat] actual: cc:bb:d2:4b:e1 A kprobe was added to the init_once() function in the fat module on load. But this happened before ftrace could have touched the code. As ftrace didn't run yet, the kprobe system had no idea it was a ftrace point and simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1). Then when ftrace went to modify the location from a call to mcount/fentry into a nop, it didn't see a call op, but instead it saw the breakpoint op and not knowing what to do with it, ftrace shut itself down. The solution is to simply give the ftrace module notifier the max priority. This should have been done regardless, as the core code ftrace modification also happens very early on in boot up. This makes the module modification closer to core modification. Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.orgAcked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by:
Frank Ch. Eigler <fche@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Hugh Daschbach authored
commit 7f9c9f8e upstream. Silicon does not support standard AHCI BAR assignment. Add vendor/device exception to force BAR 2. Signed-off-by:
Hugh Daschbach <hugh.daschbach@enmotus.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Chris Wilson authored
commit 262b6d36 upstream. In the slow path, we are forced to copy the relocations prior to acquiring the struct mutex in order to handle pagefaults. We forgo copying the new offsets back into the relocation entries in order to prevent a recursive locking bug should we trigger a pagefault whilst holding the mutex for the reservations of the execbuffer. Therefore, we need to reset the presumed_offsets just in case the objects are rebound back into their old locations after relocating for this exexbuffer - if that were to happen we would assume the relocations were valid and leave the actual pointers to the kernels dangling, instant hang. Fixes regression from commit bcf50e27 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sun Nov 21 22:07:12 2010 +0000 drm/i915: Handle pagefaults in execbuffer user relocations Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@fwll.ch> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 21 Jan, 2013 22 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit 1ee4c55f upstream. vt6656 has several headers that use the #pragma pack(1) directive to enable structure packing, but never disable it. The layout of structures defined in other headers can then depend on which order the various headers are included in, breaking the One Definition Rule. In practice this resulted in crashes on x86_64 until the order of header inclusion was changed for some files in commit 11d404cb ('staging: vt6656: fix headers and add cfg80211.'). But we need a proper fix that won't be affected by future changes to the order of inclusion. This removes the #pragma pack(1) directives and adds __packed to the structure definitions for which packing appears to have been intended. Reported-and-tested-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Tormod Volden authored
commit 811a37ef upstream. Commit 2e254212 broke listing of available network names, since it clamped the length of the returned SSID to WLAN_BSSID_LEN (6) instead of WLAN_SSID_MAXLEN (32). https://bugzilla.kernel.org/show_bug.cgi?id=52501Signed-off-by:
Tormod Volden <debian.tormod@gmail.com> Signed-off-by:
-
Maxime Ripard authored
commit 68e56cb3 upstream. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
chao bi authored
commit 014b9b4c upstream. When shut down SPI port, it's possible that MRDY has been asserted and a SPI timer was activated waiting for SRDY assert, in the case, it needs to delete this timer. Signed-off-by:
Chen Jun <jun.d.chen@intel.com> Signed-off-by:
channing <chao.bi@intel.com> Signed-off-by:
-
Bjørn Mork authored
Signed-off-by:
Bjørn Mork <bjorn@mork.no> commit 2291dff0 upstream. The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by:
-
Bjørn Mork authored
commit 99beb2e9 upstream. The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
-
Frediano Ziglio authored
commit 9174adbe upstream. This fixes CVE-2013-0190 / XSA-40 There has been an error on the xen_failsafe_callback path for failed iret, which causes the stack pointer to be wrong when entering the iret_exc error path. This can result in the kernel crashing. In the classic kernel case, the relevant code looked a little like: popl %eax # Error code from hypervisor jz 5f addl $16,%esp jmp iret_exc # Hypervisor said iret fault 5: addl $16,%esp # Hypervisor said segment selector fault Here, there are two identical addls on either option of a branch which appears to have been optimised by hoisting it above the jz, and converting it to an lea, which leaves the flags register unaffected. In the PVOPS case, the code looks like: popl_cfi %eax # Error from the hypervisor lea 16(%esp),%esp # Add $16 before choosing fault path CFI_ADJUST_CFA_OFFSET -16 jz 5f addl $16,%esp # Incorrectly adjust %esp again jmp iret_exc It is possible unprivileged userspace applications to cause this behaviour, for example by loading an LDT code selector, then changing the code selector to be not-present. At this point, there is a race condition where it is possible for the hypervisor to return back to userspace from an interrupt, fault on its own iret, and inject a failsafe_callback into the kernel. This bug has been present since the introduction of Xen PVOPS support in commit 5ead97c8 (xen: Core Xen implementation), in 2.6.23. Signed-off-by:
Frediano Ziglio <frediano.ziglio@citrix.com> Signed-off-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Matt Wilson authored
commit d0b4d64a upstream. Commit 85ff6acb (xen/granttable: Grant tables V2 implementation) changed the GREFS_PER_GRANT_FRAME macro from a constant to a conditional expression. The expression depends on grant_table_version being appropriately set. Unfortunately, at init time grant_table_version will be 0. The GREFS_PER_GRANT_FRAME conditional expression checks for "grant_table_version == 1", and therefore returns the number of grant references per frame for v2. This causes gnttab_init() to allocate fewer pages for gnttab_list, as a frame can old half the number of v2 entries than v1 entries. After gnttab_resume() is called, grant_table_version is appropriately set. nr_init_grefs will then be miscalculated and gnttab_free_count will hold a value larger than the actual number of free gref entries. If a guest is heavily utilizing improperly initialized v1 grant tables, memory corruption can occur. One common manifestation is corruption of the vmalloc list, resulting in a poisoned pointer derefrence when accessing /proc/meminfo or /proc/vmallocinfo: [ 40.770064] BUG: unable to handle kernel paging request at 0000200200001407 [ 40.770083] IP: [<ffffffff811a6fb0>] get_vmalloc_info+0x70/0x110 [ 40.770102] PGD 0 [ 40.770107] Oops: 0000 [#1] SMP [ 40.770114] CPU 10 This patch introduces a static variable, grefs_per_grant_frame, to cache the calculated value. gnttab_init() now calls gnttab_request_version() early so that grant_table_version and grefs_per_grant_frame can be appropriately set. A few BUG_ON()s have been added to prevent this type of bug from reoccurring in the future. Signed-off-by:
Matt Wilson <msw@amazon.com> Reviewed-and-Tested-by:
Steven Noonan <snoonan@amazon.com> Acked-by:
Ian Campbell <Ian.Campbell@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Annie Li <annie.li@oracle.com> Cc: xen-devel@lists.xen.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Philipp Reisner authored
commit 72585d24 upstream. Without this, iostat frequently sees bogus svctime and >= 100% "utilization". Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Raoul Bhatia <raoul@bhatia.at> Signed-off-by:
-
Stefan Assmann authored
commit 52285b76 upstream. During MSI-X setup the system might run out of vectors. If this happens the already assigned vectors for this NIC should be freed before trying the disable MSI-X. Failing to do so results in the following oops. kernel BUG at drivers/pci/msi.c:341! [...] Call Trace: [<ffffffff8128f39d>] pci_disable_msix+0x3d/0x60 [<ffffffffa037d1ce>] igb_reset_interrupt_capability+0x27/0x5c [igb] [<ffffffffa037d229>] igb_clear_interrupt_scheme+0x26/0x2d [igb] [<ffffffffa0384268>] igb_request_irq+0x73/0x297 [igb] [<ffffffffa0384554>] __igb_open+0xc8/0x223 [igb] [<ffffffffa0384815>] igb_open+0x13/0x15 [igb] [<ffffffff8144592f>] __dev_open+0xbf/0x120 [<ffffffff81443e51>] __dev_change_flags+0xa1/0x180 [<ffffffff81445828>] dev_change_flags+0x28/0x70 [<ffffffff814af537>] devinet_ioctl+0x5b7/0x620 [<ffffffff814b01c8>] inet_ioctl+0x88/0xa0 [<ffffffff8142e8a0>] sock_do_ioctl+0x30/0x70 [<ffffffff8142ecf2>] sock_ioctl+0x72/0x270 [<ffffffff8118062c>] do_vfs_ioctl+0x8c/0x340 [<ffffffff81180981>] sys_ioctl+0xa1/0xb0 [<ffffffff815161a9>] system_call_fastpath+0x16/0x1b Code: 48 89 df e8 1f 40 ed ff 4d 39 e6 49 8b 45 10 75 b6 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f c9 c3 48 8b 7b 20 e8 3e 91 db ff eb ae <0f> 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 89 e5 0f 1f 44 00 00 RIP [<ffffffff8128e144>] free_msi_irqs+0x124/0x130 RSP <ffff880037503bd8> Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Abdallah Chatila <abdallah.chatila@ericsson.com>
-
Tom Mingarelli authored
commit ea2447f7 upstream. This patch is to prevent non-USB devices that have RMRRs associated with them from being placed into the SI Domain during init. This fixes the issue where the RMRR info for devices being placed in and out of the SI Domain gets lost. Signed-off-by:
Thomas Mingarelli <thomas.mingarelli@hp.com> Tested-by:
Shuah Khan <shuah.khan@hp.com> Reviewed-by:
Donald Dutile <ddutile@redhat.com> Reviewed-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 0ff87549 upstream. This patch adds [dev,lun]_link_magic value assignment + checks within generic target_fabric_port_link() and target_fabric_mappedlun_link() code to ensure destination config_item *target_item sent from configfs_symlink() -> config_item_operations->allow_link() is the underlying se_device->dev_group and se_lun->lun_group that we expect to symlink. Reported-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Francois Romieu authored
commit 7dbb4918 upstream. While reworking the r8169 driver a few months ago to perform the smallest amount of work in the irq handler, I took care of avoiding any irq mask register operation in the slow work dedicated user context thread. The slow work thread scheduled an extra round of NAPI work which would ultimately set the irq mask register as required, thus keeping such irq mask operations in the NAPI handler. It would eventually race with the irq handler and delay NAPI execution for - assuming no further irq - a whole ksoftirqd period. Mildly a problem for rare link changes or corner case PCI events. The race was always lost after the last bh disabling lock had been removed from the work thread and people started wondering where those pesky "NOHZ: local_softirq_pending 08" messages came from. Actually the irq mask register _can_ be set up directly in the slow work thread. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Reported-by:
Dave Jones <davej@redhat.com> Tested-by:
Marc Dionne <marc.c.dionne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Sandeen authored
commit 66bea92c upstream. ext4_da_block_invalidatepages is missing a pagevec_init(), which means that pvec->cold contains random garbage. This affects whether the page goes to the front or back of the LRU when ->cold makes it to free_hot_cold_page() Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
David Henningsson authored
commit b98ae272 upstream. A patch in the 3.2 kernel caused regression with hotplugging the M-Audio Fast track pro, or sound after suspend. I don't have the device so I haven't done a full analysis, but it seems userspace (both udev and pulseaudio) got confused when a card was created, immediately destroyed, and then created again. However, at least one person in the bug report (martin djfun) reports that this patch resolves the issue for him. It also leaves a message in the log: "snd-usb-audio: probe of 1-1.1:1.1 failed with error -5" which is a bit misleading. It is better than non-working audio, but maybe there's a more elegant solution? BugLink: https://bugs.launchpad.net/bugs/1095315Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Jesse Barnes authored
commit a9acc536 upstream. SNB graphics devices have a bug that prevent them from accessing certain memory ranges, namely anything below 1M and in the pages listed in the table. So reserve those at boot if set detect a SNB gfx device on the CPU to avoid GPU hangs. Stephane Marchesin had a similar patch to the page allocator awhile back, but rather than reserving pages up front, it leaked them at allocation time. [ hpa: made a number of stylistic changes, marked arrays as static const, and made less verbose; use "memblock=debug" for full verbosity. ] Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Heiko Carstens authored
commit ed4f2094 upstream. Converting a 64 Bit TOD format value to nanoseconds means that the value must be divided by 4.096. In order to achieve that we multiply with 125 and divide by 512. When used within sched_clock() this triggers an overflow after appr. 417 days. Resulting in a sched_clock() return value that is much smaller than previously and therefore may cause all sort of weird things in subsystems that rely on a monotonic sched_clock() behaviour. To fix this implement a tod_to_ns() helper function which converts TOD values without overflow and call this function from both places that open coded the conversion: sched_clock() and kvm_s390_handle_wait(). Reviewed-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Roland Dreier authored
commit 5a3b6fc0 upstream. When transport_lookup_tmr_lun() fails and we return a task management response from target_complete_tmr_failure(), we need to call transport_cmd_check_stop_to_fabric() to release the last ref to the cmd after calling se_tfo->queue_tm_rsp(), or else we will never remove the failed TMR from the session command list (and we'll end up waiting forever when trying to tear down the session). (nab: Fix minor compile breakage) Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Mark Rustad authored
commit edec8dfe upstream. Clear the target role when no target is provided for the node performing a PRLI. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Reviewed-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Acked by Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Mark Rustad authored
commit f2eeba21 upstream. When generating a PRLI response to an initiator, clear the FCP_SPPF_RETRY bit in the response. Signed-off-by:
-
Thomas Schwinge authored
commit 4a71997a upstream. Ensure that the aux table is properly initialized, even when optional features are missing. Without this, the FDPIC loader did not work. This was meant to be included in commit d5ab7803. Signed-off-by:
Thomas Schwinge <thomas@codesourcery.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
- 17 Jan, 2013 13 commits
-
-
Greg Kroah-Hartman authored
-
Alan Stern authored
commit 36caff5d upstream. This patch (as1631) fixes a bug that shows up when a config change fails for a device under an xHCI controller. The controller needs to be told to disable the endpoints that have been enabled for the new config. The existing code does this, but before storing the information about which endpoints were enabled! As a result, any second attempt to install the new config is doomed to fail because xhci-hcd will refuse to enable an endpoint that is already enabled. The patch optimistically initializes the new endpoints' device structures before asking the device to switch to the new config. If the request fails then the endpoint information is already stored, so we can use usb_hcd_alloc_bandwidth() to disable the endpoints with no trouble. The rest of the error path is slightly more complex now; we have to disable the new interfaces and call put_device() rather than simply deallocating them. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Matthias Schniedermeyer <ms@citd.de> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Ian Abbott authored
commit 34ffb33e upstream. The 'ni_at_a2150' module links to `cfc_write_to_buffer` in the 'comedi_fc' module, so selecting 'COMEDI_NI_AT_A2150' in the kernel config needs to also select 'COMEDI_FC'. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
commit c43435d7 upstream. comedi_auto_config() associates a Comedi minor device number with an auto-configured hardware device and comedi_auto_unconfig() disassociates it. Currently, these use the hardware device's private data pointer to point to some allocated storage holding the minor device number. This is a bit of a waste of the hardware device's private data pointer, preventing it from being used for something more useful by the low-level comedi device drivers. For example, it would make more sense if comedi_usb_auto_config() was passed a pointer to the struct usb_interface instead of the struct usb_device, but this cannot be done currently because the low-level comedi drivers already use the private data pointer in the struct usb_interface for something more useful. This patch stops the comedi core hijacking the hardware device's private data pointer. Instead, comedi_auto_config() stores a pointer to the hardware device's struct device in the struct comedi_device_file_info associated with the minor device number, and comedi_auto_unconfig() calls new function comedi_find_board_minor() to recover the minor device number associated with the hardware device. Signed-off-by:
-
David Zafman authored
Function start_read() can get an error before processing all pages. It must not only release the remaining pages, but unlock them too. This fixes http://tracker.newdream.net/issues/3370Signed-off-by:
David Zafman <david.zafman@inktank.com> Reviewed-by:
Alex Elder <elder@inktank.com> (cherry picked from commit 8884d53d) Signed-off-by:
-
Yan, Zheng authored
If client sends cap message that requests new max size during exporting caps, the exporting MDS will drop the message quietly. So the client may wait for the reply that updates the max size forever. call handle_cap_grant() for cap import message can avoid this issue. Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
Sage Weil <sage@inktank.com> (cherry picked from commit 0e5e1774) Signed-off-by:
-
Yan, Zheng authored
we should set i_truncate_pending to 0 after page cache is truncated to i_truncate_size Signed-off-by:
-
Yan, Zheng authored
Add dirty inode to cap_dirty_migrating list instead, this can avoid ceph_flush_dirty_caps() entering infinite loop. Signed-off-by:
-
Yan, Zheng authored
__wake_requests() will enter infinite loop if we use it to wake requests in the session->s_waiting list. __wake_requests() deletes requests from the list and __do_request() adds requests back to the list. Signed-off-by:
-
Yan, Zheng authored
The cap from non-auth mds doesn't have a meaningful max_size value. Signed-off-by:
-
Alex Elder authored
There is no check in rbd_remove() to see if anybody holds open the image being removed. That's not cool. Add a simple open count that goes up and down with opens and closes (releases) of the device, and don't allow an rbd image to be removed if the count is non-zero. Protect the updates of the open count value with ctl_mutex to ensure the underlying rbd device doesn't get removed while concurrently being opened. Signed-off-by:
-
Alex Elder authored
In rbd_dev_id_put(), there's a loop that's intended to determine the maximum device id in use. But it isn't doing that at all, the effect of how it's written is to simply use the just-put id number, which ignores whole purpose of this function. Fix the bug. Signed-off-by:
Josh Durgin <josh.durgin@inktank.com> (cherry picked from commit b213e0b1) Signed-off-by:
-
Sage Weil authored
This shouldn't actually be possible because the layout struct is constructed from the RBD header and validated then. [elder@inktank.com: converted BUG() call to equivalent rbd_assert()] Signed-off-by:
-
