Use the DEVICE_ATTR_RO() macro to get rid of ignore_store() and shorten
attribute definitions.  Adjust whitespace to make checkpatch happy.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Setting backlight level using a vendor-specific interface should only be
possible when using the latter is either explicitly requested by the
user or automatically selected by the kernel.  fujitsu-laptop violates
that premise by unconditionally attaching three backlight-related
attributes to the platform device it registers.  Remove the offending
attributes from the platform device.  Update module comments to reflect
this change.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Reviewed-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Otherwise those are printed several times when (un)plugging the AC
connector.
Signed-off-by: Pau Espin Pedrol <pespin.shar@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

devm_input_allocate_device() already causes the supplied struct device
to be set as the parent of the input device, so doing it again is
redundant.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().

As this reduces acpi_pcc_destroy_input() to one line, replace all calls
to that function with direct calls to input_unregister_device().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().

As this reduces msi_laptop_input_destroy() to one line, replace all
calls to that function with direct calls to input_unregister_device().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().

As this reduces dell_wmi_input_destroy() to one line, replace all calls
to that function with direct calls to input_unregister_device().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

As sparse_keymap_setup() now uses a managed memory allocation for the
keymap copy it creates, the latter is freed automatically.  Remove all
calls to sparse_keymap_free().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge branch 'ib/4.10-sparse-keymap-managed' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input into testing

Error labels currently used in fujitsu_init() are really hard to follow:
some (fail_laptop) indicate which operation has failed, others
(fail_sysfs_group) indicate where unrolling should start and the rest
(fail_platform_driver) is simply confusing.  Change them to follow the
pattern used throughout the rest of the module, i.e. make every label
indicate the first unrolling operation it leads to.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Jonathan Woithe <jwoithe@just42.net>

As the backlight device registered by fujitsu-laptop relies on the
FUJ02B1 ACPI device being present, only register the backlight device
once that ACPI device is detected.
Suggested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Jonathan Woithe <jwoithe@just42.net>

Registering an ACPI driver does not mean the device it handles has to
exist.  As the code which syncs backlight power status uses
call_fext_func(), it needs the FUJ02E3 ACPI device to be present, so
ensure that code is only run once the FUJ02E3 device is detected.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Jonathan Woithe <jwoithe@just42.net>

Move code responsible for backlight device registration to a separate
function in order to simplify error handling and decrease indentation.
Simplify initialization of struct backlight_properties.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Jonathan Woithe <jwoithe@just42.net>

Returning early when there is no brightness change allows removal of a
duplicate code block, makes the purpose of the following code clearer
and allows the condition surrounding key event generation to be removed.
Local integer variables can also be declared in a single line.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Jonathan Woithe <jwoithe@just42.net>

acpi_fujitsu_bl_notify() is pretty deeply nested, which hurts
readability.  Strip off one level of indentation by returning early when
the event code supplied as argument is not ACPI_FUJITSU_NOTIFY_CODE1.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Jonathan Woithe <jwoithe@just42.net>

Like other Lenovo models the IdeaPad 310-15IKB does not have an hw rfkill
switch. This results in hard-blocked radios after boot, resulting in
always blocked radios rendering them unusable.

Add the IdeaPad 310-15IKB to the no_hw_rfkill DMI list and allows using
the built-in radios.
Signed-off-by: Sven Rebhan <Sven.Rebhan@googlemail.com>
[andy: massaged commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The T470, X270 emits new hkey events in the 0x1311 - 0x1315 range.
According to the user manual they should launch a user selected
favorite application (star icon, 0x1311), snipping tool (0x1312,
currently ignored), enable/disable bluetooth (0x1314) and open they
keyboard settings (0x1315).

The third nibble (0xf00) is used to differentiate between the original
hotkeys, the adaptive keyboard codes and the new, additional ones.
Signed-off-by: Christian Kellner <ckellner@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Currently when dispatching hotkeys we check if the scancode is in
the range of 0 and TPACPI_HOTKEY_MAP_LEN, although the bottom 20
entries in the hotkey keymap are already adaptive keycodes.
Therefore we introduce a TP_ACPI_HOTKEYSCAN_ADAPTIVE_START and
ensure that we are in the range 0 and ADAPTIVE_START for the generic
keycode case.
Signed-off-by: Christian Kellner <ckellner@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Remove redundant set_bit() call for KEY_RFKILL as it is already made by
sparse_keymap_setup() due to KEY_RFKILL being assigned to event code 8
in intel_hid_keymap.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>

intel_hid_input_setup() is only called from the platform driver's .probe
callback.  Use the devm variant of input_allocate_device() for
allocating memory for the HID events input device in order to simplify
two error paths and get rid of intel_hid_input_destroy().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>

As the integer value passed to intel_hid_set_enable() is always
explicitly passed and is used solely as a boolean value, make it a bool.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>

ACPI method HDSM takes a single integer argument.  Use
acpi_execute_simple_method() instead of acpi_evaluate_object() for
calling that ACPI method to simplify code and reduce the number of local
variables inside intel_hid_set_enable().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Alex Hung <alex.hung@canonical.com>

Pull networking fixes from David Miller:

 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
    from Steffen Klassert.

 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
    Alexei Starovoitov.

 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
    Michal Schmidt.

 4) We can get a divide by zero when TCP socket are morphed into
    listening state, fix from Eric Dumazet.

 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
    skb_complete_tx_timestamp(). From Eric Dumazet.

 6) Use after free in dccp_feat_activate_values(), also from Eric
    Dumazet.

 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
    Jarod Wilson.

 8) Fix use after free in vrf_xmit(), from David Ahern.

 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
    Alexey Kodanev.

10) Properly check napi_complete_done() return value in order to decide
    whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
    Lendacky.

11) Fix double free of hwmon device in marvell phy driver, from Andrew
    Lunn.

12) Don't crash on malformed netlink attributes in act_connmark, from
    Etienne Noss.

13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
    from Sabrina Dubroca.

14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
    Florian Westphal.

15) Fix routing redirect races in dccp and tcp, basically the ICMP
    handler can't modify the socket's cached route in it's locked by the
    user at this moment. From Jon Maxwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
  qed: Enable iSCSI Out-of-Order
  qed: Correct out-of-bound access in OOO history
  qed: Fix interrupt flags on Rx LL2
  qed: Free previous connections when releasing iSCSI
  qed: Fix mapping leak on LL2 rx flow
  qed: Prevent creation of too-big u32-chains
  qed: Align CIDs according to DORQ requirement
  mlxsw: reg: Fix SPVMLR max record count
  mlxsw: reg: Fix SPVM max record count
  net: Resend IGMP memberships upon peer notification.
  dccp: fix memory leak during tear-down of unsuccessful connection request
  tun: fix premature POLLOUT notification on tun devices
  dccp/tcp: fix routing redirect race
  ucc/hdlc: fix two little issue
  vxlan: fix ovs support
  net: use net->count to check whether a netns is alive or not
  bridge: drop netfilter fake rtable unconditionally
  ipv6: avoid write to a possibly cloned skb
  net: wimax/i2400m: fix NULL-deref at probe
  isdn/gigaset: fix NULL-deref at probe
  ...

Pull cgroup fixes from Tejun Heo:
 "Three cgroup fixes.  Nothing critical:

   - the pids controller could trigger suspicious RCU warning
     spuriously. Fixed.

   - in the debug controller, %p -> %pK to protect kernel pointer
     from getting exposed.

   - documentation formatting fix"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroups: censor kernel pointer in debug files
  cgroup/pids: remove spurious suspicious RCU usage warning
  cgroup: Fix indenting in PID controller documentation

Pull libata fixes from Tejun Heo:
 "Three libata fixes:

   - fix for a circular reference bug in sysfs code which prevented
     pata_legacy devices from being released after probe failure, which
     in turn prevented devres from releasing the associated resources.

   - drop spurious WARN in the command issue path which can be triggered
     by a legitimate passthrough command.

   - an ahci_qoriq specific fix"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: qoriq: correct the sata ecc setting error
  libata: drop WARN from protocol error in ata_sff_qc_issue()
  libata: transport: Remove circular dependency at free time

Pull workqueue fix from Tejun Heo:
 "If a delayed work is queued with NULL @wq, workqueue code explodes
  after the timer expires at which point it's difficult to tell who the
  culprit was.

  This actually happened and the offender was net/smc this time.

  Add an explicit sanity check for it in the queueing path"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq

Pull percpu fixes from Tejun Heo:

 - the allocation path was updating pcpu_nr_empty_pop_pages without the
   required locking which can lead to incorrect handling of empty chunks
   (e.g. keeping too many around), which is buggy but shouldn't lead to
   critical failures. Fixed by adding the locking

 - a trivial patch to drop an unused param from pcpu_get_pages()

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove unused chunk_alloc parameter from pcpu_get_pages()
  percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages

Yuval Mintz says:

====================
qed: Fixes series

This address several different issues in qed.
The more significant portions:

Patch #1 would cause timeout when qedr utilizes the highest
CIDs availble for it [or when future qede adapters would utilize
queues in some constellations].

Patch #4 fixes a leak of mapped addresses; When iommu is enabled,
offloaded storage protocols might eventually run out of resources
and fail to map additional buffers.

Patches #6,#7 were missing in the initial iSCSI infrastructure
submissions, and would hamper qedi's stability when it reaches
out-of-order scenarios.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Missing in the initial submission, qed fails to propagate qedi's
request to enable OOO to firmware.

Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Need to set the number of entries in database, otherwise the logic
would quickly surpass the array.

Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>