- 29 Oct, 2021 2 commits
-
-
Matthew Auld authored
Normal users shouldn't be hitting this, likely this would indicate a userspace bug. So don't bother caching, which should be safe now that we manually flush the page. Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211028092638.3142258-2-matthew.auld@intel.com
-
Matthew Auld authored
The scratch page is directly visible in the users address space, and while this is forced as CACHE_LLC, by the kernel, we still have to contend with things like "Bypass-LLC" MOCS. So just flush no matter what. v2(Thomas): - Make sure we use drm_clflush_virt_range here, in case clflush support is missing. Signed-off-by:
-
- 28 Oct, 2021 2 commits
-
-
Umesh Nerlige Ramappa authored
With GuC handling scheduling, i915 is not aware of the time that a context is scheduled in and out of the engine. Since i915 pmu relies on this info to provide engine busyness to the user, GuC shares this info with i915 for all engines using shared memory. For each engine, this info contains: - total busyness: total time that the context was running (total) - id: id of the running context (id) - start timestamp: timestamp when the context started running (start) At the time (now) of sampling the engine busyness, if the id is valid (!= ~0), and start is non-zero, then the context is considered to be active and the engine busyness is calculated using the below equation engine busyness = total + (now - start) All times are obtained from the gt clock base. For inactive contexts, engine busyness is just equal to the total. The start and total values provided by GuC are 32 bits and wrap around in a few minutes. Since perf pmu provides busyness as 64 bit monotonically increasing values, there is a need for this implementation to account for overflows and extend the time to 64 bits before returning busyness to the user. In order to do that, a worker runs periodically at frequency = 1/8th the time it takes for the timestamp to wrap. As an example, that would be once in 27 seconds for a gt clock frequency of 19.2 MHz. Note: There might be an over-accounting of busyness due to the fact that GuC may be updating the total and start values while kmd is reading them. (i.e kmd may read the updated total and the stale start). In such a case, user may see higher busyness value followed by smaller ones which would eventually catch up to the higher value. v2: (Tvrtko) - Include details in commit message - Move intel engine busyness function into execlist code - Use union inside engine->stats - Use natural type for ping delay jiffies - Drop active_work condition checks - Use for_each_engine if iterating all engines - Drop seq locking, use spinlock at GuC level to update engine stats - Document worker specific details v3: (Tvrtko/Umesh) - Demarcate GuC and execlist stat objects with comments - Document known over-accounting issue in commit - Provide a consistent view of GuC state - Add hooks to gt park/unpark for GuC busyness - Stop/start worker in gt park/unpark path - Drop inline - Move spinlock and worker inits to GuC initialization - Drop helpers that are called only once v4: (Tvrtko/Matt/Umesh) - Drop addressed opens from commit message - Get runtime pm in ping, remove from the park path - Use cancel_delayed_work_sync in disable_submission path - Update stats during reset prepare - Skip ping if reset in progress - Explicitly name execlists and GuC stats objects - Since disable_submission is called from many places, move resetting stats to intel_guc_submission_reset_prepare v5: (Tvrtko) - Add a trylock helper that does not sleep and synchronize PMU event callbacks and worker with gt reset v6: (CI BAT failures) - DUTs using execlist submission failed to boot since __gt_unpark is called during i915 load. This ends up calling the GuC busyness unpark hook and results in kick-starting an uninitialized worker. Let park/unpark hooks check if GuC submission has been initialized. - drop cant_sleep() from trylock helper since rcu_read_lock takes care of that. v7: (CI) Fix igt@i915_selftest@live@gt_engines - For GuC mode of submission the engine busyness is derived from gt time domain. Use gt time elapsed as reference in the selftest. - Increase busyness calculation to 10ms duration to ensure batch runs longer and falls within the busyness tolerances in selftest. v8: - Use ktime_get in selftest as before - intel_reset_trylock_no_wait results in a lockdep splat that is not trivial to fix since the PMU callback runs in irq context and the reset paths are tightly knit into the driver. The test that uncovers this is igt@perf_pmu@faulting-read. Drop intel_reset_trylock_no_wait, instead use the reset_count to synchronize with gt reset during pmu callback. For the ping, continue to use intel_reset_trylock since ping is not run in irq context. - GuC PM timestamp does not tick when GuC is idle. This can potentially result in wrong busyness values when a context is active on the engine, but GuC is idle. Use the RING TIMESTAMP as GPU timestamp to process the GuC busyness stats. This works since both GuC timestamp and RING timestamp are synced with the same clock. - The busyness stats may get updated after the batch starts running. This delay causes the busyness reported for 100us duration to fall below 95% in the selftest. The only option at this time is to wait for GuC busyness to change from idle to active before we sample busyness over a 100us period. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Acked-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-2-umesh.nerlige.ramappa@intel.com
-
Umesh Nerlige Ramappa authored
In preparation for GuC pmu stats, add a name to the execlists stats structure so that it can be differentiated from the GuC stats. Signed-off-by:
-
- 27 Oct, 2021 2 commits
-
-
Joonas Lahtinen authored
Avoid adding backend specific data to the tracepoints outside of the LOW_LEVEL_TRACEPOINTS kernel config protection. These bits of information are bound to change depending on the selected submission method per platform and are not necessarily possible to maintain in the future. Fixes: dbf9da8d ("drm/i915/guc: Add trace point for GuC submit") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Joonas Lahtinen authored
Add Tvrtko Ursulin as a co-maintainer for drm/i915 driver. Tvrtko will bring added bandwidth and focus to the GT/GEM domain (drm-intel-gt-next). This will help with the increased driver maintenance efforts, allows alternating the drm-intel-gt-next pull requests and also should increase the coverage for the maintenance in general. Signed-off-by:
Jani Nikula <jani.nikula@linux.intel.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211025134907.20078-1-joonas.lahtinen@linux.intel.com
-
- 25 Oct, 2021 2 commits
-
-
Wan Jiabing authored
Fix following coccicheck warning: ./drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c:3117:15-22: WARNING: ERR_CAST can be used with eb->requests[i]. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Reviewed-by:
-
Kai Song authored
Fix inconsistent IS_ERR and PTR_ERR in i915_gem_dmabuf.c Signed-off-by:
Kai Song <songkai01@inspur.com> Reviewed-by:
-
- 22 Oct, 2021 13 commits
-
-
Matthew Brost authored
Use __release_guc_id (lock held) rather than release_guc_id (acquires lock), add lockdep annotations. 213.280129] i915: Running i915_perf_live_selftests/live_noa_gpr [ 213.283459] ============================================ [ 213.283462] WARNING: possible recursive locking detected {{[ 213.283466] 5.15.0-rc6+ #18 Tainted: G U W }} [ 213.283470] -------------------------------------------- [ 213.283472] kworker/u24:0/8 is trying to acquire lock: [ 213.283475] ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x2df/0x350 [i915] {{[ 213.283618] }} {{ but task is already holding lock:}} [ 213.283621] ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x4f/0x350 [i915] {{[ 213.283720] }} {{ other info that might help us debug this:}} [ 213.283724] Possible unsafe locking scenario:[ 213.283727] CPU0 [ 213.283728] ---- [ 213.283730] lock(&guc->submission_state.lock); [ 213.283734] lock(&guc->submission_state.lock); {{[ 213.283737] }} {{ *** DEADLOCK ***}}[ 213.283740] May be due to missing lock nesting notation[ 213.283744] 3 locks held by kworker/u24:0/8: [ 213.283747] #0: ffff8ffb80059d38 ((wq_completion)events_unbound){..}-{0:0}, at: process_one_work+0x1f3/0x550 [ 213.283757] #1: ffffb509000e3e78 ((work_completion)(&guc->submission_state.destroyed_worker)){..}-{0:0}, at: process_one_work+0x1f3/0x550 [ 213.283766] #2: ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x4f/0x350 [i915] {{[ 213.283860] }} {{ stack backtrace:}} [ 213.283863] CPU: 8 PID: 8 Comm: kworker/u24:0 Tainted: G U W 5.15.0-rc6+ #18 [ 213.283868] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 213.283873] Workqueue: events_unbound destroyed_worker_func [i915] [ 213.283957] Call Trace: [ 213.283960] dump_stack_lvl+0x57/0x72 [ 213.283966] __lock_acquire.cold+0x191/0x2d3 [ 213.283972] lock_acquire+0xb5/0x2b0 [ 213.283978] ? destroyed_worker_func+0x2df/0x350 [i915] [ 213.284059] ? destroyed_worker_func+0x2d7/0x350 [i915] [ 213.284139] ? lock_release+0xb9/0x280 [ 213.284143] _raw_spin_lock_irqsave+0x48/0x60 [ 213.284148] ? destroyed_worker_func+0x2df/0x350 [i915] [ 213.284226] destroyed_worker_func+0x2df/0x350 [i915] [ 213.284310] process_one_work+0x270/0x550 [ 213.284315] worker_thread+0x52/0x3b0 [ 213.284319] ? process_one_work+0x550/0x550 [ 213.284322] kthread+0x135/0x160 [ 213.284326] ? set_kthread_struct+0x40/0x40 [ 213.284331] ret_from_fork+0x1f/0x30 and a bit later in the trace: {{ 227.499864] do_raw_spin_lock+0x94/0xa0}} [ 227.499868] _raw_spin_lock_irqsave+0x50/0x60 [ 227.499871] ? guc_flush_destroyed_contexts+0x4f/0xf0 [i915] [ 227.499995] guc_flush_destroyed_contexts+0x4f/0xf0 [i915] [ 227.500104] intel_guc_submission_reset_prepare+0x99/0x4b0 [i915] [ 227.500209] ? mark_held_locks+0x49/0x70 [ 227.500212] intel_uc_reset_prepare+0x46/0x50 [i915] [ 227.500320] reset_prepare+0x78/0x90 [i915] [ 227.500412] __intel_gt_set_wedged.part.0+0x13/0xe0 [i915] [ 227.500485] intel_gt_set_wedged.part.0+0x54/0x100 [i915] [ 227.500556] intel_gt_set_wedged_on_fini+0x1a/0x30 [i915] [ 227.500622] intel_gt_driver_unregister+0x1e/0x60 [i915] [ 227.500694] i915_driver_remove+0x4a/0xf0 [i915] [ 227.500767] i915_pci_probe+0x84/0x170 [i915] [ 227.500838] local_pci_probe+0x42/0x80 [ 227.500842] pci_device_probe+0xd9/0x190 [ 227.500844] really_probe+0x1f2/0x3f0 [ 227.500847] __driver_probe_device+0xfe/0x180 [ 227.500848] driver_probe_device+0x1e/0x90 [ 227.500850] __driver_attach+0xc4/0x1d0 [ 227.500851] ? __device_attach_driver+0xe0/0xe0 [ 227.500853] ? __device_attach_driver+0xe0/0xe0 [ 227.500854] bus_for_each_dev+0x64/0x90 [ 227.500856] bus_add_driver+0x12e/0x1f0 [ 227.500857] driver_register+0x8f/0xe0 [ 227.500859] i915_init+0x1d/0x8f [i915] [ 227.500934] ? 0xffffffffc144a000 [ 227.500936] do_one_initcall+0x58/0x2d0 [ 227.500938] ? rcu_read_lock_sched_held+0x3f/0x80 [ 227.500940] ? kmem_cache_alloc_trace+0x238/0x2d0 [ 227.500944] do_init_module+0x5c/0x270 [ 227.500946] __do_sys_finit_module+0x95/0xe0 [ 227.500949] do_syscall_64+0x38/0x90 [ 227.500951] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 227.500953] RIP: 0033:0x7ffa59d2ae0d [ 227.500954] Code: c8 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3b 80 0c 00 f7 d8 64 89 01 48 [ 227.500955] RSP: 002b:00007fff320bbf48 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 227.500956] RAX: ffffffffffffffda RBX: 00000000022ea710 RCX: 00007ffa59d2ae0d [ 227.500957] RDX: 0000000000000000 RSI: 00000000022e1d90 RDI: 0000000000000004 [ 227.500958] RBP: 0000000000000020 R08: 00007ffa59df3a60 R09: 0000000000000070 [ 227.500958] R10: 00000000022e1d90 R11: 0000000000000246 R12: 00000000022e1d90 [ 227.500959] R13: 00000000022e58e0 R14: 0000000000000043 R15: 00000000022e42c0 v2: (CI build) - Fix build error Fixes: 1a52faed ("drm/i915/guc: Take GT PM ref when deregistering context") Signed-off-by: -
Matthew Brost authored
Update live.evict to wait on last request and idle GPU after each loop. This not only enhances the test to fill the GGTT on each engine class but also avoid timeouts from igt_flush_test when using GuC submission. igt_flush_test (idle GPU) can take a long time with GuC submission if losts of contexts are created due to H2G / G2H required to destroy contexts. Signed-off-by:
-
Matthew Brost authored
perf_parallel_engines is micro benchmark to test i915 request scheduling. The test creates a thread per physical engine and submits NOP requests and waits the requests to complete in a loop. In execlists mode this works perfectly fine as powerful CPU has enough cores to feed each engine and process the CSBs. With GuC submission the uC gets overwhelmed as all threads feed into a single CTB channel and the GuC gets bombarded with CSBs as contexts are immediately switched in and out on the engines due to the zero runtime of the requests. When the GuC is overwhelmed scheduling of contexts is unfair due to the nature of the GuC scheduling algorithm. This behavior is understood and deemed acceptable as this micro benchmark isn't close to real world use case. Increasing the timeout of wait period for requests to complete. This makes the test understand that is ok for contexts to get starved in this scenario. A future patch / cleanup may just delete these micro benchmark tests as they basically mean nothing. We care about real workloads not made up ones. Signed-off-by:
-
Matthew Auld authored
Turn on the shmem tt backend, and enable shrinking. Signed-off-by:
-
Matthew Auld authored
This should let us do an accelerated copy directly to the shmem pages when temporarily moving lmem-only objects, where the i915-gem shrinker can later kick in to swap out the pages, if needed. Signed-off-by:
-
Matthew Auld authored
We currently just evict lmem objects to system memory when under memory pressure. For this case we might lack the usual object mm.pages, which effectively hides the pages from the i915-gem shrinker, until we actually "attach" the TT to the object, or in the case of lmem-only objects it just gets migrated back to lmem when touched again. For all cases we can just adjust the i915 shrinker LRU each time we also adjust the TTM LRU. The two cases we care about are: 1) When something is moved by TTM, including when initially populating an object. Importantly this covers the case where TTM moves something from lmem <-> smem, outside of the normal get_pages() interface, which should still ensure the shmem pages underneath are reclaimable. 2) When calling into i915_gem_object_unlock(). The unlock should ensure the object is removed from the shinker LRU, if it was indeed swapped out, or just purged, when the shrinker drops the object lock. v2(Thomas): - Handle managing the shrinker LRU in adjust_lru, where it is always safe to touch the object. v3(Thomas): - Pretty much a re-write. This time piggy back off the shrink_pin stuff, which actually seems to fit quite well for what we want here. v4(Thomas): - Just use a simple boolean for tracking ttm_shrinkable. v5: - Ensure we call adjust_lru when faulting the object, to ensure the pages are visible to the shrinker, if needed. - Add back the adjust_lru when in i915_ttm_move (Thomas) v6(Reported-by: kernel test robot <lkp@intel.com>): - Remove unused i915_tt Signed-off-by: -
Matthew Auld authored
Attempt to document shrink_pin and the other relevant interfaces that interact with it, before we start messing with it. Signed-off-by:
-
Matthew Auld authored
The comment here is no longer accurate, since the current shrinker code requires a full ref before touching any objects. Also unset_pages() should already do the required make_unshrinkable() for us, if needed, which is also nicely balanced with set_pages(). Signed-off-by:
-
Matthew Auld authored
We already do this when mapping the pages. Signed-off-by:
-
Matthew Auld authored
For cached objects we can allocate our pages directly in shmem. This should make it possible(in a later patch) to utilise the existing i915-gem shrinker code for such objects. For now this is still disabled. v2(Thomas): - Add optional try_to_writeback hook for objects. Importantly we need to check if the object is even still shrinkable; in between us dropping the shrinker LRU lock and acquiring the object lock it could for example have been moved. Also we need to differentiate between "lazy" shrinking and the immediate writeback mode. Also later we need to handle objects which don't even have mm.pages, so bundling this into put_pages() would require somehow handling that edge case, hence just letting the ttm backend handle everything in try_to_writeback doesn't seem too bad. v3(Thomas): - Likely a bad idea to touch the object from the unpopulate hook, since it's not possible to hold a reference, without also creating circular dependency, so likely this is too fragile. For now just ensure we at least mark the pages as dirty/accessed when called from the shrinker on WILLNEED objects. - s/try_to_writeback/shrinker_release_pages, since this can do more than just writeback. - Get rid of do_backup boolean and just set the SWAPPED flag prior to calling unpopulate. - Keep shmem_tt as lowest priority for the TTM LRU bo_swapout walk, since these just get skipped anyway. We can try to come up with something better later. v4(Thomas): - s/PCI_DMA/DMA/. Also drop NO_KERNEL_MAPPING and NO_WARN, which apparently doesn't do anything with streaming mappings. - Just pass along the error for ->truncate, and assume nothing. Signed-off-by:Oak Zeng <oak.zeng@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-2-matthew.auld@intel.com
-
Thomas Hellström authored
Break out some shmem backend utils for future reuse by the TTM backend: shmem_alloc_st(), shmem_free_st() and __shmem_writeback() which we can use to provide a shmem-backed TTM page pool for cached-only TTM buffer objects. Main functional change here is that we now compute the page sizes using the dma segments rather than using the physical page address segments. v2(Reported-by: kernel test robot <lkp@intel.com>) - Make sure we initialise the mapping on the error path in shmem_get_pages() Signed-off-by: -
Joonas Lahtinen authored
Backmerging to pull in the new dma_resv iterators requested by Maarten and Matt. Signed-off-by: -
Matthew Auld authored
wbinvd_on_all_cpus() is only defined on x86 it seems, plus we need to include asm/smp.h here. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021125332.2455288-1-matthew.auld@intel.com
-
- 21 Oct, 2021 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Expose multi-LRC submission interface Similar to the bonded submission interface but simplified. Comes with GuC only implementation for now. See kerneldoc for more details. Userspace changes: https://github.com/intel/media-driver/pull/1252 - Expose logical engine instance to user Needed by the multi-LRC submission interface for GuC Userspace changes: https://github.com/intel/media-driver/pull/1252 Driver Changes: - Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh) - Add support for multi-LRC submission in the GuC backend (Matt B) - Add extra cache flushing before making pages userspace visible (Matt A, Thomas) - Mark internal GPU object pages dirty so they will be flushed properly (Matt A) - Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi) - Replace the unconditional clflushes with drm_clflush_virt_range() (Ville) - Remove IS_ACTIVE macro completely (Lucas) - Improve kerneldocs for cache_dirty (Matt A) - Add missing includes (Lucas) - Selftest improvements (Matt R, Ran, Matt A) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - No Functional change, but a clarification around I915_TILING values (Matt). Driver Changes: - Changes around async flip VT-d w/a (Ville) - Delete bogus NULL check in intel_ddi_encoder_destroy (Dan) - DP link training improvements and DP per-lane driver settings (Ville) - Free the returned object of acpi_evaluate_dsm (Zenghui) - Fixes and improvements around DP's UHBR and MST (Jani) - refactor plane config + pin out (Dave) - remove unused include in intel_dsi_vbt.c (Lucas) - some code clean up (Lucas, Jani) - gracefully disable dual eDP (Jani) - Remove memory frequency calculation (Jose) - Fix oops on platforms w/o hpd support (Ville) - Clean up PXP Kconfig info (Rodrigo) Signed-off-by:
-
- 20 Oct, 2021 10 commits
-
-
Matthew Auld authored
Just like we do for internal objects. Also just use i915_gem_object_set_cache_coherency() here. No need for over-flushing on LLC platforms. Signed-off-by:
-
Matthew Auld authored
While the pages can't be swapped out, they can be discarded by the shrinker. Normally such objects are marked with __I915_MADV_PURGED, which can't be unset, and therefore requires a new object. For kernel internal objects this is not true, since the madv hint is reset for our special volatile objects, such that we can re-acquire new pages, if so desired, without needing a new object. As a result we should probably be paranoid here and put the object back into the CPU domain when discarding the pages, and also correctly set cache_dirty, if required. Signed-off-by:
-
Matthew Auld authored
Add some details around non-LLC platforms and cflushing, when dealing with the flush-on-acquire, which is potentially security sensitive. Signed-off-by:
-
Matthew Auld authored
On non-LLC platforms, force the flush-on-acquire if this is ever swapped-in. Our async flush path is not trust worthy enough yet(and happens in the wrong order), and with some tricks it's conceivable for userspace to change the cache-level to I915_CACHE_NONE after the pages are swapped-in, and since execbuf binds the object before doing the async flush, there is a potential race window. Signed-off-by:
-
Matthew Auld authored
Even though userptr objects are always coherent with the GPU, with no way for userspace to change this with the set_caching ioctl, even on non-LLC platforms, there is still the 'Bypass LCC' mocs setting, which might permit reading the contents of main memory directly. Signed-off-by:
-
Matthew Auld authored
As pointed out by Thomas, we likely need to flush the pages here if the GPU can read the page contents directly from main memory. Underneath we don't know what the sg_table is pointing to, so just add a wbinvd_on_all_cpus() here, for now. Reported-by:
-
Matthew Auld authored
It looks like we will need this in some more places, so extract as a helper. Signed-off-by:
-
Matthew Auld authored
These are userspace objects, so mark them as such. In a later patch it's useful to determine how paranoid we need to be when managing cache flushes. In theory no functional changes. Signed-off-by:
-
Matthew Auld authored
These are userspace objects, so mark them as such. In a later patch it's useful to determine how paranoid we need to be when managing cache flushes. In theory no functional changes. Signed-off-by:
-
Ran Jianping authored
'drm/ttm/ttm_placement.h' included in 'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated. It is also included on the 9 line. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Ran Jianping <ran.jianping@zte.com.cn> Reviewed-by:
-
- 18 Oct, 2021 3 commits
-
-
Ville Syrjälä authored
Replace the unconditional clflush() with drm_clflush_virt_range() which does the wbinvd() fallback when clflush is not available. This time no justification is given for the clflush in the offending commit. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Fixes: 2c8ab333 ("drm/i915: Pin timeline map after first timeline pin, v4.") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
This one is apparently a "clflush for good measure", so bit more justification (if you can call it that) than some of the others. Convert to drm_clflush_virt_range() again so that machines without clflush will survive the ordeal. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1 Fixes: 12ca695d ("drm/i915: Do not share hwsp across contexts any more, v8.") Signed-off-by:
-
Ville Syrjälä authored
Not all machines have clflush, so don't go assuming they do. Not really sure why the clflush is even here since hwsp is supposed to get snooped I thought. Although in my case we're talking about a i830 machine where render/blitter snooping is definitely busted. But it might work for the hswp perhaps. Haven't really reverse engineered that one fully. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Fixes: b436a5f8 ("drm/i915/gt: Track all timelines created using the HWSP") Signed-off-by:
-
- 15 Oct, 2021 4 commits
-
-
Rodrigo Vivi authored
During the review I focused on stop the using of the "+" to reference the newer platforms, but I forgot that we are in a process of making things more clear and differentiate graphics and display versions. So, let me to clean up this a bit. Also, we don't need any version mentioned in the config menu entry, only in the help. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211015090916.82968-1-rodrigo.vivi@intel.com
-
Matthew Brost authored
Enable multi-bb execbuf by enabling the set_parallel extension. Signed-off-by:
-
Matthew Brost authored
Parallel submission create composite fences (dma_fence_array) for excl / shared slots in objects. The I915_GEM_BUSY IOCTL checks these slots to determine the busyness of the object. Prior to patch it only check if the fence in the slot was a i915_request. Update the check to understand composite fences and correctly report the busyness. v2: (Tvrtko) - Remove duplicate BUILD_BUG_ON Reviewed-by:
-
Matthew Brost authored
If an object in the excl or shared slot is a composite fence from a parallel submit and the current request in the conflict tracking is from the same parallel context there is no need to enforce ordering as the ordering is already implicit. Make the request conflict tracking understand this by comparing a parallel submit's parent context and skipping conflict insertion if the values match. v2: (John Harrison) - Reword commit message Signed-off-by:
-
